Professional Documents
Culture Documents
Eesiflo Catalogue
Eesiflo Catalogue
Eesiflo Catalogue
PHILIPPINEs
60 Kaki Bukit Place Block 2 Lot 6 Phase 2A Grand Royale Subdivision
#01-12 EUNOS Tech Park Singapore 415979 Longos Malolos Bulacan 3000
TEL: +65 - 6748 -6911 TEL: +044 816-0988
Email: sales@eesiflo.com Email: info@flowmeters.io
WATER
DETECTION IN OIL
AND FUEL
EASZ-2 ONLINE WATER IN OIL/FUEL ANALYSER
Over 70% of the world is covered in water, so its no surprise that water
can make its way into an oil. Detecting water in oil is important when
the amount of water content exceeds design limitations of equipment
using oil, especially when continuous lubrication is a must. Too much
water in fuel can also cause a malfunction.
Some examples of how water creeps into systems is through
condensation in tanks, leaking heat exchangers, leaking coolers or even
the presence of water from a process. It is not always possible to ensure
that a design has a “water tight” system and that ingress or
contamination never occurs.
What kind of damage can be caused by water in oil? At any moment of the day, there are people taking samples of oil to
test for water content either using a centrifuge method or some
Water in oil can cause components to function less optimally than what laboratory device e.g. Karl Fisher laboratory testing. Sampling
they were designed for. The most obvious evidence is normally the frequency needs to be increased when water contamination needs to
presence of corrosion (rusting) as well as fatigue on rotating parts like be “caught” in a timely manner so that action can be taken. In many
bearings. Component wear, jamming and even the formation of ice cases, this excessive sampling is not only costly but also time
crystals needs to be avoided in systems where their effects can cause consuming and where measurements are necessary at all times it is
unwanted damage, capital loss and in some cases even the safety of not so effective. The EASZ-2 online water in oil/fuel analyser is an
personnel. instrument that has been designed by EESIFLO International to give
operators a chance to not only immediately detect the presence of
water in an oil system but also to accurately measure the amounts
present at any time.
The EASZ-2 is a modern day “Easy 2 Use” online instrument that is far
more accurate and repeatable than it’s predecessors. It has been
designed to faithfully maintain accuracy/repeatability in industrial
environments without compromising precision, especially in lower
concentrations of water.
The EASZ-2 display will give not only a visual indication of the water
content but also a backlight status e.g. green for normal condition,
yellow/amber for approaching limits and red for alarm conditions. The
electronics give the user a choice of a milliamp output, a contact
output or Modbus communication as standard. The unit is also CE
compliant and has been designed and tested to meet the most recent
European EMC requirements.
The EASZ-2 Ex is also available for oil and gas industry applications. The
electronics are housed in an Exd enclosure with a choice of intrinsically
safe outputs.
The EASZ-2 was released in late 2017 and is currently now in full
production. If you would like more information to see if EESIFLO can
meet your needs, please contact Phil Hughes by email
(phil@eesiflo.com)
WATER IN FUEL
MONITORS
What is a water in fuel sensor?
The EASZ-2 can measure both gradual moisture increases over time
as well as the presence of free water in real time. Operators will have
the added advantage of knowing when an event has occurred e.g. a
sudden increase in water droplets in the fuel pipe during operation.
Such measurements are taken once per second.
The EASZ-2
FEATURES
Water and Oil do not normally mix and gravitational separation
Highly Accurate Online Water Cut Measurements with causes oil to travel along the top of the pipe and the water to travel
temperature compensation along the bottom creating a phenomenon called "bottom water". If
Flow Conditioning Design (built in EESIMIX) this two part solution is not thoroughly mixed before it enters a
Analog Output – HART communication 2-wire watercut meter, it is very likely that watercut measurements will be
Flexible Ranges for most applications inaccurate. In some cases it is possible that the water will be missed
Marking: Ex ia I/IIB T4 Ga (-20°C < Ta < +60°C) entirely.
IECEx Certified Equipment Full Online Data
EESIFLO International manufactures water-cut analyzers with built in
APPLICATIONS integral mixing elements upstream of our EASZ-1 Water in Oil sensor,
thereby creating a homogeneous mixture as it enters the sensing
BS&W Analyzer /BS&W Probe (LACT) element. We also manufacture separate inline static mixers (EESIMIX)
Production Wells – Net Oil Computing but the integral spool piece design is often preferred since a single
Crude Oil Analyzer Systems – Water Content Reporting spool piece will homogenize and analyze the fluid in one product.
Water in Gas Condensate Analysis Optional sampling ports can be added downstream of the mixing
Crude Oil Sampling Systems elements as required.
Online Water Measurement in Hydrocarbons
Combination Installation with Coriolis Meter /Crude Oil CONSIDERATIONS- SELECTING THE CORRECT WATER CUT METER
Densitometer
Fiscal Metering Skids – Low Cut Measurements EESIFLO® can assist in the selection of a range of water-cut meters
Oil Transportation - Tank Truck Unloading Water in Oil Analyzer that are manufactured “off the shelf” products to cover most general
applications which might suit the purpose without any additional
INDUSTRIES economical impact. Our manufacturing facility holds stock for a line
of most commonly used water cut meters.
Offshore Oil and Gas Exploration EESIFLO ® is also an engineering and design company. Some of the
Crude Oil Production Facilities (Offshore/Onshore) common questions involving the selection of the correct meter will be
Crude Oil Pipelines
Power Generation – Fuel Monitoring
Tank Farms/ Oil Terminals
Refinery – Oil Movements
Crude Oil Fiscal Metering Consultants & Contractors
Hydrocarbons
Oil-Theft Prevention Systems
Oil Emulsion Reporting
Desalters in Refineries
Dewatering of Petroleum Products
Two Stage/Three Stage Oil Separators/ Gravity Oil Separators