Download as pdf or txt
Download as pdf or txt
You are on page 1of 31

humiSonic compact

Climate
Business Unit
Octobre 2015

This document and all its contents are for Carel internal use only and strictly CONFIDENTIAL
All unauthorized use, reproduction or distribution of this document or the information contained in it,
by anyone other than Carel employees is severely forbidden
CAREL is one of the world leaders in control solutions
for air-conditioning, refrigeration and heating, and systems for
humidification and evaporative cooling.
Our products are designed to bring energy savings and reduce
the environmental impact of machinery and systems.
The humiSonic family has grown!

compact direct

ventilation
DROPLET SIZE WORKING POWER
HOURS CONSUMPTION
instantaneous Transducers compared to steam
absorbtion lifetime humidifier
Agenda

 ultrasonic humidification

 features

 applications

 sales strategy
Ultrasonic humidifiers
Ultrasonic humidification
Water atomization happens due to a
double effect:
CAVITATION
The rapid vibration creates small
cavitation bubbles which explode on
the surface releasing microscopic
droplets

CAPILLARY WAVE
Waves generated in the water tank by
the oscillators release droplets

droplet size
Features
Features
NEW TRANSDUCERS

• power 0,5 kg/h


• endurance 10.000 hr with RO
water

the transducer’s driver has been developed by


Carel

hours
Features
Capacity (kg/h)

1,0 -

0,5 -

UU01F UU01G
Features
Capacity (kg/h)

compactSteam

humiDisk

humiSonic

heaterSteam

humiSteam (KUE)

0 20 40 60 80 100 120 140

humiSonic
is an energy saving alternative to isothermal humidifiers
Features
POWER CONSUMPTION (W/kg)

humiSonic

Isothermal

0 100 200 300 400 500 600 700 800

humiSonic needs less than 80 watt per kg of nebulized water,


about 10% compared to isothermal technology
Features
COMPLETE SOLUTION

humiSonic needs just the power, RO


water and drain connections:

 control panel is not needed: (power


supply from transformer already
included)
 dedicated humidity probe (optional)
or can be managed by external
controller via serial communication
Features
WATER TREATMENT SYSTEM

humiSonic performances as far as hygiene and reliability, are at their best


operating with RO water

humiSonic Expansion UV lamp WTS


compact vessel Compact
Features
WATER TREATMENT SYSTEM

humiSonic guarantees more than 10.000 working hours only operating with
demineralized water

demineralized water
Features
HYGIENE

hygiene on adiabatic solutions is a must for CAREL

 washing cycles management


 automatic tank drain if shut down
 Each component in touch with water is stainless steel made
 humiSonic uses fresh RO water with the additional safety of the
UV lamp
Features
Does humiSonic work with tap water?

Yes but with many limitations:


 transducers life time will be related to the water quality thus
changeable
 droplets carry in the surrounded environment dust
 less precision due to frequent washing cycles
 hygiene, won’t be guaranteed anymore
Features
MASTER/SLAVE CONFIGURATION

for extracapacity demand or homogeneous humidity


distribution a master unit can drive up to three humiSonic.
IT IS REQUIRED ONLY ONE
AUXILIARY CARD AND ONE
DISPLAY

BMS RS485

T-lan up to 3 slaves

each slave unit matches the master status


Features
CERTIFICATIONS

humiSonic compact is certified in compliance with the main norms of


european and american market.
Accessories
Dedicated humidity probe
HYHU00000

This probe is suitable only for humiSonic.


Installed in the surrounding ambient
where humiSonic is installed.
humiSonic is reading the value of
humidity detected by the probe.
The set point is then established by dip
switches (default = 50%) or connecting a
trimmer.

30% 40% 50% 60%


Accessories
Auxiliary card (optional)
UUKAX00000
T-Lan Display
terminal
connection

T-Lan AUX serial


connection
Active probe or (for master & slave
External proportional communication)
controller
(0-10 V) (4-20 mA)
Accessories
Display UUKDI00000

It allows the access to the


list of parameters in order
to optimize the
configuration of
humiSonic.

Through display, it is
possible to set the
humidity set point.

It is connected to the
auxiliary card.
Accessories

Distribution system
UUKDP02500 flexible hose and stainless steel distributor L = 250 mm

UUKDP05300 flexible hose and stainless steel distributor L = 530 mm

UUKDP06100 flexible hose and stainless steel distributor L = 610 mm

UUKDP08500 flexible hose and stainless steel distributor L = 850 mm


Accessories

UUKHS00000
Elbow connection
UUKFL00000
Filter 50 µm

UUKCY00000
conveyor for inlet
UUKCY00000
fan
diffusor
Accessories
New amperometric sensor TAM
UUKTA00000

The power supply neutral wire of the fan has to


pass through the hole of TAM.

On detection of the current flow, the TAM


sensor will enable or disable the system.

humiSonic will only work when the fan is


operational.

To enable the TAM, dip switches have to be


configured as in the figure.
Applications

humiSonic compact is versatile, compact and easy to


install.

Suitable for a large number of food applications, from


production processes to fresh products conservation.
Applications

COMFORT
Installed inside the fan coil, it is the
ideal solution to combine temperature
and humidity control!

STRENGHTS
 Small size
 Energy savings
 Complete solution
 Hygiene
Applications

DISPLAY CABINET
Installed inside showcases, humiSonic preserves
products' freshness, avoids weight losses and
preserves the appeal.

STRENGHTS
 Hygiene
 Energy savings
 Complete solution
 Minimum maintenance
Applications

DOUGH RETARDER
Humidity control is crucial during the dough
retarding process.

STRENGHTS
 Energy savings
 Minimum maintenance
 Precision
eBooks – Climate tools

eBooks
“Air humidification”
“Evaporative Cooling”

Climate tools app

You might also like