Professional Documents
Culture Documents
Toyota GR Corolla (Updated May 2023)
Toyota GR Corolla (Updated May 2023)
Toyota GR Corolla (Updated May 2023)
GR Corolla
Model Year: 2023+
Chassis Code: GZEA14H
Engine: 1.6L 3-Cyl Turbo - G16E-GTS
Full Length Height Adjustable Coilover Preload Height Adjustable Coilover Mono-Tube Twin-Tube
Lowered Lowered
Amount Piston Rod Piston Rod
Amount
Spring Preload
unchanged
Low Pressure Gas
There are two main design structures of the suspension coilover system.
Both these structures enable vehicle height change, however, the Two types of shock absorbers are used in the
method of doing so varies. Cusco Suspension product lineup.
When adjusting the ride height on the Preload height adjustment The Mono-Tube shock absorber has a single
coilover, some of the shock stroke length or spring preload must be cylinder which is completely divided into a fluid
compromised. Height is adjusted by turning the spring lock perch. area and gas chamber. This design enables the
utilization of a larger piston valve and stronger
When adjusting the ride height on the Full Length Height Adjustable outer shell. Mono-Tube is recognized as a shock
Coilover, the shock stroke length and the spring preload remains absorber that can handle marginal input from the
unchanged. Height is adjusted by turning the bottom case lock nut. road surface with its high speed piston capabilities.
A full length ride height adjustable system enables vehicle ride height The Twin-Tube shock absorber has two separated
adjustment without disturbing the spring preload configuration. chambers where the inner chamber regulates the
vertical movement of the shock shaft, and the
Fig 1 : Full ride height adjustment ability by adjusting lock nut (B) at the bracket. The outer cylinder acts as an hydraulic fluid reservoir.
spring-load lock nut (A) remains untouched, providing full shock absorber stroke length Twin-Tube is ideal for street and best known for
(C). comfort, as well as its long lasting features.
Fig 2 : The preload spring rate can be adjusted without changing the vehicle ride height.
Twin-Tube shock absorbers have two separated
Fig. 1 Fig. 2
fluid areas where the inner cylinder controls the
Preload Position
vertical movement of the piston and shaft. The
outer cylinder works as an hydraulic fluid reservoir
Ride Height change only. The nitrogen gas and base valves provide
fluid flow control between the cylinders while the
Stroke Volume main piston valve controls most of the dampening.
The Twin-Tube features a longer stroke and longer
Preload gain lasting compared to the mono-tube. The twin
The preload spring rate can
BRACKET be adjusted without changing valve setup is ideal for passenger comfort.
the vehicle ride height
02 suspension.cuscousainc.com
03 Coilover
Front Rear
Street Zero-A Coilover Kit - Front: Pillowball Upper Mount / Rear: No Upper Mount
REAR Pillowball Upper Mount - Not included - Utilize Factory Upper Mounts
1H1 61N CN Spring Rate: Rear 8kgf/mm (Optional 7kgf/mm & 9kgf/mm per request), ID=65mm, L=250mm
Ride Height: 15mm (Adjustable Range -30mm to 0mm)
Overhaul: Available
e-Con2 Remote Controller Compatibility: No;
03 suspension.cuscousainc.com
04 Suspension Front Sway Bar
Part No. 1H1 311 A28 Price $ 410.00
04 cuscousainc.com/products/suspension-components/
05 Suspension
Adjustable Rear Upper Arm, Rear Side
Part No. 1C7 474 L Price $ 614.00
Turn Buckle Adjustable range:+10 / -10mm for Camber Adjustment
For Lowered vehicle to adjust proper rear camber angle
Set of 2
05 cuscousainc.com/products/suspension-components/
06 Suspension
Pillowball / HD Rubber Bushing Kit
PRODUCT INFORMATION
Various suspension bushings designed to maintain that specific alignment setting during hard cornering.
* Sold in 2 pieces set
* Pillowball
06 cuscousainc.com/products/suspension-components/
07 Suspension
07 cuscousainc.com/products/suspension-components/
08 Power Brace
Front Strut Bar - Type-OS
Part No. 1A9 540 A Price $ 200.00
PRODUCT INFORMATION
Aluminum
Oval/Flat Shape Type-3 Bar
Bolt-on
PRODUCT INFORMATION
Center Floor
Bolt-on
08 suspension.cuscousainc.com
09 Power Brace
Rear Cross Member
Part No. 1H1 492 R Price $ 220.00
PRODUCT INFORMATION
Bolt-on
New part for GR Corolla only
Rear End
Part No. 1H1 492 RE Price $ 187.00
PRODUCT INFORMATION
Bolt-on
New part for GR Corolla only
09 suspension.cuscousainc.com
10 Sports Equipment
Sports Accel Pedal
Part No. 1C7 766 A Price $ 56.00
PRODUCT INFORMATION
Wider pedals enable heel & toe
* Bolt-on
PRODUCT INFORMATION
DURACON (Polyoxymethylene) matrials, M12-P1.25
Come with 6MT Shift pattern
PRODUCT INFORMATION
* Bolt on - Reuse OE Holes
10 cuscousainc.com/products/cusco-gear/
11 Sports Equipment
Swivel Tow Hook: Front
Part No. 1C7 017 F Price $ 131.00
PRODUCT INFORMATION
* 90-deg
PRODUCT INFORMATION
* 90-deg
11 cuscousainc.com/products/cusco-gear/
12 Engine Parts
Magnetic Oil Filter
Part No. 00B 001 B Price $ 34.00
PRODUCT INFORMATION
High Flow
Magnetic Filter
Pitching Stopper
Part No. 1C7 911 PS Price $ 240.00
PRODUCT INFORMATION
Material: Steel with HD Rubber Bushing
Direct OE Replacement
PRODUCT INFORMATION
*Suction Return Kit included
Capacity: 0.6L
Hose: 15mm diameter
Including suction return kit
12 cuscousainc.com/products/engine-parts/
13 Drive Train Parts
Rear Diff Mount Collar Set, Front Side
Part No. 1C7 028 B Price $ 94.00
PRODUCT INFORMATION
* Add-on type
* Bolt-on
* Billet Aluminum, Blue
PRODUCT INFORMATION
* Add-on type
* Bolt-on
* Billet Aluminum, Blue
PRODUCT INFORMATION
* Add-on type for OE Differential Mount Upper & Lower
* Bolt-on
* Billet Aluminum, Blue
13 cuscousainc.com/products/drivetrain/
14 Drive Train Parts
High Capacity Billet Aluminum Differential Cover [ Blue ]
Part No. 1C7 008 AL Price $ 907.00
PRODUCT INFORMATION
* Volume increased by 250ml (OEM 500ml vs CUSCO 750ml)
* Built in heat sink fins promote efficient cooling
14 cuscousainc.com/products/drivetrain/
15 Clutch System
Copper Disc + Clutch Cover set
Part No. 1C7 022 F Price $ 960.00
Clutch Cover
Part No. 00C 022 B1C7 Price $ 627.00
PRODUCT INFORMATION
* Direct OE Replacement
* Must use with Cusco Clutch Cover
* Cusco Clutch Cover not compatible with OEM disc
Heat Resistant & long endurance Strengthened metal disc
Metal Cover
Part No. 00C 022 B1C7 Price $ 627.00
PRODUCT INFORMATION
* Direct OE Replacement
* Must use with Cusco Clutch Cover
* Cusco Clutch Cover not compatible with OEM disc
Heat Resistant & long endurance Strengthened metal disc
15 cuscousainc.com/products/drivetrain/
16Limited Slip Differential
1 WAY CAM
RS SPRING
Low Initial Torque, Responsive, & Long Life 2 WAY CAM
PRODUCT INFORMATION
* Minimizes drivetrain power loss, great for underpowered
vehicles
* Less chattering noise than conventional LSD systems
* Activated by RS coil springs which are designed not to
lose its pressure consistency for a stable and extended
performance use.
* A more direct feeling due to activation and pressure
direction being on the same axis for improved throttle control.
CONE SPRING
1 WAY CAM
2 WAY CAM
High Initial Torque, Liner Engagement
PRODUCT INFORMATION
* The Type MZ is designed where the activation pressure
opposes
The direction of the initial torque with the utilization of cone
springs.
* Available for various driveline setups that require higher initial
Torque setting for activation.
* Suited for high horse-powered vehicles that requires maximum
traction.
16 lsd.cuscousainc.com/
17Limited Slip Differential
Front
LSD Type Position LSD Type - Way 1 - Way 1.5 - Way Price
LSD 1C7 F LSD-1C7-V15
Type - RS Front 1&1.5 - Way Default 35/45 deg Default 35/45 deg
Initial Torque: 3-5 kg Initial Torque: 3-5 kg
Rear
LSD Type LSD Type - Way 1 - Way 1.5 - Way 2 - Way Price
LSD 1C8 C LSD 1C8 C15
1&1.5 - Way Default: 45 deg. Default: 55/20 deg.
Initial Torque: 2-4 kg Initial Torque: 2-4 kg
Type - RS
LSD 1C8 L15 LSD 1C8 L2
1.5&2 - Way Default: 55/20 deg. Default: 55/55 deg.
Initial Torque: 2-4 kg Initial Torque: 2-4 kg
$ 1,200.00
LSD 1C8 B LSD 1C8 B15
1&1.5 - Way Default: 45 deg. Default: 55/20 deg.
Initial Torque: 8-10 kg Initial Torque: 8-10 kg
Type - MZ
LSD 1C8 K15 LSD 1C8 K2
1.5&2 - Way Default: 55/20 deg. Default: 55/55 deg.
Initial Torque: 8-10 kg Initial Torque: 8-10 kg
17 lsd.cuscousainc.com/
18 Sports Equipment
18 cuscousainc.com/products/cusco-gear/
19 Sports Equipment
[6 Point for HANS Devices] - Blue : 2 inch shoulder belts
Part No. 00B CRH 6HBL Price $ 420.00
19 cuscousainc.com/products/cusco-gear/
20 Sports Equipment
[4 Point - 3 inch Width] - Blue
Part No. 00B CRH 4BL Price $ 360.00
20 cuscousainc.com/products/cusco-gear/
21 Cusco x Bride Seats
FULL BUCKET SEAT
FIA Approved
* Black with Cusco Logo
* FRP Silver - Weight : 7.4 kg / 16 lbs
* Super Aramid - Weight : 7.4 kg / 16 lbs
* FIA Approved
* Black Fabric with Cusco Logo
* FRP Silver - Weight : 7.6 kg / 17 lbs
* Super Aramid - Weight : 7.6 kg / 17 lbs
* FIA Approved
* Black Fabric with Cusco Logo
* FRP Silver - Weight : 8.0 kg / 17.4 lbs
* Super Aramid - Weight : 8.0 kg / 17.4 lbs
21 cuscousainc.com/products/bride-racing-seats/
22 Cusco x Bride Seats
Compatible with ZETA IV / ZEIG IV / A.i.R.
22 cuscousainc.com/products/bride-racing-seats/
23 Cusco x Bride Seats
RECLINING SEAT
EUROSTER II
Part No. BRD-E32ACN Price $ 1,100.00
EUROSTER II CRUZ
Part No. BRD-E54ACN Price $ 1,150.00
* Weight: 16.1kg / 35.5lbs.
* Luxury Suede Fabric
* Fireproof Material
* Safety Standard Compliant (Japan)
* Black base with Grey Mesh center
23 cuscousainc.com/products/bride-racing-seats/
24 Cusco x Bride Seats
Compatible with STRADIA III / EUROSTER II / EUROSTER II CRUZ
24 cuscousainc.com/products/bride-racing-seats/
CUSCO USA Inc.
16635 Gemini Lane, Huntington Beach, CA 92647
E-Mail : info@cuscousainc.com