Professional Documents
Culture Documents
Stick 3.200 M
Stick 3.200 M
Página 1 de 4
Cerrar SIS
Pantalla anterior
Producto: EXCAVATOR
Modelo: 330D L EXCAVATOR MWP00735
Configuración: 330D L Excavator MWP00001-UP (MACHINE) POWERED BY C9 Engine
Especificaciones
330D and 336D Excavators, 330D Material Handler and 330D Waste Handler Machine
System Specifications
Número de medio -RENR9923-05 Fecha de publicación -01/07/2011 Fecha de actualización -18/07/2011
i04374494
S/N - J2F1-UP
S/N - MWP1-UP
S/N - R2D1-UP
S/N - W3K1-UP
S/N - ZML1-UP
https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 18/05/2023
330D L Excavator MWP00001-UP (MACHINE) POWERED BY C9 Engine(SEBP451... Página 2 de 4
Illustration 1 g02539516
Note: All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the
pins, the bucket, and cylinder pin bores.
Table 1
Specification for 236-8393 Hoe Stick Gp, 236-8396 Hoe Stick Gp, 237-3208 Hoe Stick Gp, 282
-4560 Hoe Stick Gp, 290-9263 Hoe Stick Gp, 290-9263 Hoe Stick Gp, 290-9272 Hoe Stick Gp,
and 294-1507 Hoe Stick Gp
Item Qty
Part Specification Description
https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 18/05/2023
330D L Excavator MWP00001-UP (MACHINE) POWERED BY C9 Engine(SEBP451... Página 3 de 4
Lubricate the sealing lip of the lip type seals lightly with the lubricant
166-1498
that is being sealed. Install the dust seal so that the lip faces outside,
7 2 Lip Type
as shown. Install the lip type seals so that the lip type seals do not
Seal
extend beyond the face of the boss.
5I-3299 Pin Diameter is
8 1
As 79.850 ± 0.025 mm (3.1437 ± 0.0010 inch).
113-2963 Diameter is
9 1
Pin As 89.850 ± 0.025 mm (3.5374 ± 0.0010 inch).
Install the following bushings (10) , (13) and (14) in the bore so that the part number
of each bushing is facing outward.
Bushing is one of the following part numbers:
Inside diameter is
236-8561 120.20 ± 0.02 mm (4.732 ± 0.010 inch).
Lubricate the sealing lip of the lip type seals lightly with the lubricant
235-7679
that is being sealed. Install the dust seal so that the lip faces outside,
11 2 Lip Type
Seal as shown. Install the lip type seals so that the lip type seals do not
extend beyond the face of the boss.
Lubricate the sealing lip of the lip type seals lightly with the lubricant
166-1496
12 2 that is being sealed. Install the dust seal so that the lip faces outside,
Lip Type
as shown. Install the lip type seals so that the lip type seals do not
Seal
extend beyond the face of the boss.
Inside diameter is
241-7231 70.17 ± 0.04 mm (2.763 ± 0.002 inch).
13 2
Bushing Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).
Inside diameter is
228-5617 100.29 ± 0.04 mm (3.948 ± 0.002 inch).
14 2
Bushing Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).
https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 18/05/2023
330D L Excavator MWP00001-UP (MACHINE) POWERED BY C9 Engine(SEBP451... Página 4 de 4
Copyright 1993 - 2023 Caterpillar Inc. Thu May 18 10:54:00 UTC-0400 2023
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 18/05/2023