Enriching Lives
SOLIDS HANDLING NON-CLOG PUMPS
TYPE- SHM / SHS / SHV
ce KIRLOSKAR BROTHERS LIMITEDCasing
Impeller
Gland
Shaft
Bearing Bracket
RANGE
Delivery
up to 200 mm
Capacity up to 800 m’/hr
Head up to 90 m
Max. permissible solid size up to 105 mm,
depending on the model consistency up to 5%
OP impellers for more than 6% consistency,
impellers for more than 4% consistency
FNS MYT
For handling liquids with s in suspension,
sludge or pulpy material in Paper Industries,
sewage or waste with soft solids in
suspension, viscous liquids or liquids carrying
fibrous material or powdered material slurries,
contaminated process liquids like Sugar
factory waste, trade liquors, Water Carrying
Gravel, ete.(loo UU
SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design.
SHS are vertical non-clog pumps for wet pit applications. The pump unit is suspended by a column pipe
which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m.
SHV are vertical non-clog pumps for dry pit application in vertical orientation to be driven by vertical
flange mounted motor which is directly coupled.
Also, SHVT pumps are vertical non-clog pumps for dry pit application in vertical orientation to be driven
by vertical flange mounted motor but coupled through transmission shafting.
‘These pumps operate at 50 Hz.
Pump Ca:
End suction with top centreline delivery as well as horizontal side delivery. High efficiency volute
providing smooth unobstructed flow. Delivery flange and feet are cast integral with the casing. A large
inspection opening is provided on casing with easily removable cover.
Impeller :
Single suction type non-clog, free flow impeller dynamically balanced. Enclosed or semi-open impellers
are available in code N, P,Q or R.
Shafts :
In SHM pumps, four driving units cover the entire range. Shaft is supported by two bearings. Shaft in
stuffing box area is protected by a shaft sleeve. Axial clearance between semi-open impeller and su
wear plate can be adjusted externally without dismantling the pump. The shaft sleeves under bearing
housing and bearing spider are shrunk fitted to shaft in SHS pumps.
Stuffing Box
Standard stuffing box is gland packed with grease sealing. Without cooling up to 90°C and with cooling
up to 140°C. Mechanical seal option is also available.
Bearings :
SHM Pumps
Standard : Deep groove ball bearings at DE/NDE.
Optional : Deep groove ball bearing at DE and roller bearing at NDE.
A pair of angular contact ball bearings at DE and one cylindrical roller bearing at NDE.
Standard lubrication is grease and optional is oil.
SHS Pumps :
Intermediate shaft bearing is rubber (For water Lubrication) and bronze bearing (For grease lubrication).
Thrust ball bearing in combination with metallic journal bearing at head shaft. Transmission bearings are
lubricated with external clear water or grease.
Thrust bearings are grease lubricated,
Direction Of Rotation :
Clockwise viewed from driving end.
Drive
These pumps are suitable for coupling with electric motor or engine directly
or through belt drives.
Flanges :
Standard : drilling to DIN 2533 ND 16
Optional : drilling to ASA/BSASely NM Co oe oir Nd
.—__w. nt
Shaft End View from Driving End.
DIMENSIONS
BHM eae WB 805 | tgp 725/28 210 gy) 460 420 400) 315 18. 28 8
sere | || elo SSL ol la ll [33
ow a :
ala .
saa || Salon lS nd [laa lon “3
ne = |, =
SH 080 ‘SHM 13. 360 | 160 a5 eas 720/450 349 20) 7? | a00 130 °8"| 4 ae 15, ‘M0 650 330 60 110/635 18 180, ae
SS owe Soe i oz ae =
heen
2 we ea ate sag enAROLES. 25 @
he
Det
DIMENSIONS
e
FOUNDATION DETAILS OF SHS 100-26,SHS 100-32,
'SHS80-40,SHS 100-40,SHS 150-26,SHS 150-32,
FOUNDATION DETAILS OF SHS50-26,SHS 65.22,
‘SHS 80-26,
SHS50.26 65 «5055-175. 15 | 4527561281 202| 15 B75 S50. S70 127, -109| | ATG BD 250.785
sHsesa2 | eo | os | 575 | 175 | 69 | s7a/| 261 | 292 | 224 | 166 | st9 | 600 | era | tae | nis | 2° | s54 | 20 | 250 | 15
sHseo2s 00 go G10. 175 | go | Ser 251 a00 222 | 202 ado | Goo Gas 150 «S| 3 | Set 30280 305
‘SHS 10026 | 125 | 100 | 626 | 190 | 6 | 458 | 261 | 170 | 238 | 207 | 976 | 650 | e16 | no | v4 | a” | 444 | 20 | 250 | 460
SHSt00-22 125 100 625 190 | 90 | dod 1S 78298 | 207 T000| 650 Gao tae aN | | 477 30280 47D
‘sHse040 | 100 | 0 | 610 | 190 | 160 | 626 | 256 | 330 | 218 | 202 | 150| 600 | 790 | 378 | 115 | 3° | aes | 20 | 250 | 450
SHS 100-40 125 100 680 200 | 90 | S34 356 178 298 | 212 1000) 660 AO 138 HY | 4 | S18 3D 250.505
‘SHS 15026 | 150 | 150 75 | 200 | 79 | see | 356 | 228 | 258 | 217 |s049| 00 | 689 | 151 | 108 | 6° | ses | 30 | 750 | 505
SHS160-22 160160 670 200 | 122 | 629 401 228 252| 217 1092) G00 722 162 104 | 6 | O73 250. SIE
‘sHs 15040 | 150 | 150 | 675 | 200 | 79 | see | a56 | 228 | 250 | 217 | 1049 | goo | ceo | 151 | 104 |e | sea | a0 | 250 | 520
SHS20092 200200 675-200 | 79 | S64 58 228 259 | 217 1049) G00 689 181 104| 6 | 584 302505
rors
2B Weep mcaCROSS SECTIONAL VIEW SHM PUMP
euveRy
seias2 180 240-300 229227 4 ‘95
21 — ae 291 605 2501 238 on
‘ST. BOX SEALING OUTLET
PLUGGED
INTERCHANGEABILITY OF COMPONENTS
10500 Pump Casing w fr or zfsi>s)a os 6 7) 7/8 9 wi nj} as
15100 Imp wlriz{sjal/s|elr7i{e)el|wlni2lu|ulu| w
18000 Sha afaiatalalale2)2 2 2/4 ao alalala
18000 | Casing Ring etajafalsi[sielelo2{sfs|sjelelslr|e
22000 casing Cover wir tiaf2)2) 3 4 6 8 6) 7 7 & bis]
2700 | Lantern Ring @falafalalafelelef{e2}s|s]sls]safala
22900 Gland afar oaial ala) 2) 2 2 2falai as a alae
23600 | Detector atajalalafafefele[2falafalalalale
24000 Bearing Housing a faroaialalal 2) 2 2 2}a)a a as alale
24100 | cantidge e@falafafafale|efaf2fslsfsls]sfale
25100 Support Foot 2atrioaiale2fel-|-)- -|-
26001 |Boaring NOE a tajafafalafe|e|2{2};slsfalalsafala
‘26002 Beating DE afrorial ala) 2.2 2 2])3)3 3 s slala
27100 | Bearing Cover atrlafafalafe}e|e2{2fsls]slalalala
31100. Sha Sowve aftariatalatale2l}e2 2 2]fala)2 s)safala
32000 efajatalafafe}elef{2)slsafslalalale
22100 afaroaialatal 2) 2 2 2]fala a a) stale
5000 SP Ty eye epee epee spel
47000 Inspection Holecover, <2) 1 1 a fa a) 2.2 4 81/9/39 3 2 a) aiarely NM oe Ale MD oar Nd
INTERCHANGEABILITY OF COMPONENTS:
107 Pump Casing mois fa2 ia fe} s 6 | 7 |e |e) wo on
132 | Top Column Pipe apap pepe papa papa pe pape
142 sing pipos s 1 f2 a]4)¢ a) 5/5) 5) 4 5
151 | impetior um faf2}fsafels|oelr]s io | win
184 Intermediate Shatt 1 rea a fa baa fafa ba fag
105 | Head shat a fafafa fa fafa papa fe pape
186 | Pump Shet sor fs a fe) 2 2) se | a | sss
180 | Casing Ring efrfsle2falelz2{s]s]s [ale
21 Section Bal Mouth 6 1]}3a)2fa4]a 2} s6]s5]si)a 6
286 voir ta a fa faa fa fa pa fog
2a 2fatafatafafafafalawla fe
202 za ta ia fa faa} a fa fe |e
Ey alee pepe ye papa pe eta ype
311 impotier Shak Sieve a fupape pele pes pa ls pes
3382 Pipe Nutfor Rising Pipe s 1} 2 3) 4) 4 3) 5 | 5s) sas
280
a1
To Sut Motor KW and Frame
288 Sound cousins
420 Conpenin Feng si +f2lefel*+ sfse[s|sl[asALTERNATIVES AVAILABLE TYPE OF IMPELLER
DIFFERENT TYPES OF IMPELLER FOR
SOLID HANDLING PUMP TYPE 'SHM'
N- TWO VANES ENCLOSED IMPELLER
Q/QP - THREE VANES SEMIOPEN IMPELLER
a gSTUFFING BOX COOLING ARRANGEMENT
DELIVERY
COOLING OUTLET
<= SUCTION
P
COOLING INLET
GENERAL DIMENSIONS / MOUNTING DETAILS
ALTERNATIVE AVAILABLE VERTICAL DRY PIT HORIZONTAL DELIVERY END
VIEW FROM D.E,MATERIALS
MATERIAL OF CONSTRUCTION
casing ‘Cae ron / Cast Stal Stunles Stal / Duplex Steel
Casing Cover cast ton Cast Steal Stainless Stal
Impeller {cast ton Bronze / Phosphor Bronze | Cast Steel / Stinles Stee / Chrome Steel / Duplex Stas!
Wosr Ring ‘cast ton Bronze Stsinlore Stel
Shatt ‘carbon Stoel Stainiss Stool Duplex Sts!
‘Shaft Sleeve ‘Stainless Stel Bronza Chrome Stool
Lantern Ring ‘cast ton Bronze Stainless St
Giang cast iron Bronze
MATERIAL STANDARDS - GENERAL INFORMATION
Cast tron
Catton Is 210 Gr. FG 260, ‘ASTM Ads Class 40 (o.s025)01N 1581 6625,
‘Spheroidal Graphite Cast Iron
36 ron (Duet ron} Is 1868 Gr 40075 896, 6040-18 (o-7040}01N1693 6cc40
36 ron (Duets ron) 15 1868 Gr 50077 1596, 6-45-12 (07050)01N1693 GGc50
15 1570 (pant) Gr. 40ce ASTMANOT Gr. 1040, uateeicenescKeo
15 1570 (part) Gr. 20¢8 ‘ASTM AIO7 Ge 1020 (roseaiea2
MS 1S 2062 - Fe 10WA ‘ASTM.A283 GRO DIN 1700 GR ST4-2raunicareo sveeLas
ASTMA216 Gr.We8 1osiaigs-c2s)
Cast Stainless Steet
Stainless Stel CF2M Is sun or ¢ |ASTMA 351 Gr. CFaM 1 atosiGxscrNiMo9-1-2)
Staniose Stl CF2M 15 3448 Gr. 4 |ASTMA 743 Gr. CFEM 114408(6XSCrNiMot8-11.2)
Stainless Sto! CF2M 1s 3448 Gr 16 ASTMA351 Gr. CFM, 114409(GX2crNiMo1911.2)
Is 9448 Ge 16 ‘ASTMAA 749 Gr CFIM 14s091Gx2crNiMo19 1.2)
Is 2444 Get ‘ASTMA 351 Gr CFB ‘Laao1(xsceNi-t0)
‘Stainless Stal CF2 Is 3408 Ge 15| ‘ASTMA 351 Gr CFS 114306K26eNit9 1)
Cast Chromium SteinlessStee!
St Is 2444 Gr 10 ASTMA217 Ge CANS rosea adsioint744s @xi2cri4)
Sua 15 3408 Gr 10 ASTMA 749 Gr. CATS 11068 aae1OINT74AS Gx:2¢r14)
Sta Is 3408 Gr 26 ASTMA 487 Gr CAGNM, 143981 49171GXSCANIMOTS 6)
Sta Is 9448 Gr 26 ASTM 741 Gr CAGNM as 241491 7IGXSC-NIMOTS 4)
Chromium StainlessSteel Round Bar Matterial
Stainles stoe 10 15 1570 (pan) Gr. x12cr12 ASTMA 276 ype 610 -aoos(xrocr3)
‘Stainless steel 420, 15 1570 (pen) Gr xz0cri3 [ASTMA 276 type 420, ‘an23px206r3)
‘Stainlen tee! 431 15 1570 (pen) Gr. x1scri6Ni2 [ASTMA 278 typo 431 ‘.aos7K206rNi17)
Stainless stool 316 15 1670 pan) Gr. XO«CrI7NiT2Mo2 _ASTMA276 ype 316 ‘LaaorxscrNiMo7122)
‘Stainlos 001316. 15 1970(panV) Gr XO2CrHINIT2Mo2 _ASTMA 776 ype2161 ‘asoayxacrnimo810)
Cast Duplex Stee!
Duplex Stoo! A ASTMA 890 Ge COsMCu 25cr5NiMo.Cu
Duplex Sion! 2A, |ASTMA B00 Gr. CEBMIN 24c-1ONi-MoN
Duplex Stes! 3 ASTMA B90 Ge COBWIN 25¢e-SNiMoN
‘Super Duplex [ASTM B90 Ge COSMIN 25Cr-INEMoN
‘Supar Duplx st [ASTMA E90 Gr. CEOMIN 24¢r10Ni-MON
Non Ferious Materials
Bronze 15 318.Gr LT82 (CuSnszrsPuEc) ASTM 584~.c80500 IN 1705 Ra 6
Phosphor Bronze 15 286.1 (cus
Zine Free Borne 15 28 Gr. 1 (cusm0c}PUBL
‘SHM/SHS/SHV/SHVT Pumps at 1450 1pm - 50 Hz.
120
100
80
70
60
50
40
30
25
20 10/30
0/26 Ne ce
18 20)
vsop0
a" aS
65/32 na(28)
Total Head in Meters
10
08
o7
06 * Shower
05 ron
04
25 30 40 50 100 100 100 300 400500600 800
Capacity in m°/hr.
Note + Figures in bracket indicate moximum permissible solid size.
* Not applicable for SHS Pump
‘SHM/SHS/SHV/SHVT Pumps at 980 rpm - 50 Hz.
40
30
20 sony
15 (60)
10
08
06
Total Head in Meters
04
e Bhan
eon
02
10 20-30-40 50 100 150 200 300 400 600
Capacity in m’/hr.
Note : Figures in bracket indicate maximum permissible solid size
* Not applicable for SHS PumpAISA ty
SHM/SHS/SHV/SHVT Pumps at 1150 rpm - 60 Hz.
Total Head in Meters
60
50.
45
40
35
30
25
20
15
12
10
09
08
o7
08
05.
4
35
03
25
02
/ “eA
/ *
150/50
(70)
/ ‘aot y/
80140 a5) (50)
150/40
(75)
Lf 85152 Ning i530
C
5) eee
2 —
50/26 NB vag
2S Y *] 200132
RA al
80/26
(0) ”
100/26
(70) | _\
150/26 NB
(60)
“Sener
4 8 6 8 1012515 20 30 40 §0 60 80 100100150 200
Capacity in m'/hr.
Note + Figures in bracket indicate maximum permissible sole size
* Not applicable for SHS PumpOUR GLOBAL PRESENCE
led i this publication. For latest information you may get in touch with our Regional Sé
KIRLOSKAR BROTHERS LIMITED
Pees conponare ornce BD EO] Ee.
a “Vane Sumo No 88 (7), Baer,
Tole 91 20 27214484 Fox: +91 20 2721117
Enriching Lives email kBin@YBL.co.n_wabsite: wwwbl.c.in
‘works
Kiciskarvadi 416908 ist, Sana
Fox: +91 2346 222311
EUROPE OFFICE :Kitoskar Brothers Eurape BV Fccswikweg 7-9, 1951 MH Velsen Nord, The Nethvands Tel +31 (2