Professional Documents
Culture Documents
General Information About The Aircraft
General Information About The Aircraft
(ÿ 03.02 – 110)
MINISTRY OF EDUCATION AND SCIENCE OF UKRAINE
National Aviation University Aerospace Faculty Department
of Aerodynamics and Aircraft Flight Safety
AGREED APPROVED by
Dean of ACF the Vice-Rector for Academic Affairs
M. Kulyk A. Polukhin
"" 2021 "" 2021
WORKING PROGRAM
of the educational
discipline "General information about
the aircraft (structure, systems and power plant)"
Total
Form DZ / RGR / KR/ The form of
Semester (ECTS hours/ LKTC PR.Z L.Z SRS
teaching K.r. KP the sem. control
credits)
Denna: 1 210/7.0 17 - 85 108 1\1 - Exam
Index NB-1-272.02/21-2.1.5.2
The work program of the discipline "General information about the aircraft (structure,
systems and power plant)" was developed on the basis of the educational and
professional program "Flight operation of aircraft", educational and work plans
NB-1-272.02/21 and RB-1-272.02/ 21 of the training of higher education applicants of the
educational degree "Bachelor" in the specialty 272 "Aviation transport", specialization 272.02
"Flight operation of aircraft" and relevant regulatory documents.
The work program was discussed and approved at the meeting of the Department of
Aerodynamics and Aircraft Flight Safety, Minutes No. 8 dated May 11, 2021.
The work program was discussed and approved at the meeting of the scientific methodical
and editorial board of the Aerospace Faculty, protocol No. 14 of May 2021.
Document level – 3b
Planned period between revisions – 1 year
Control copy
Machine Translated by Google
Recommended literature (basic and auxiliary) ............................... 3.3. Information resources on the 12
4. Rating system for evaluating the knowledge and skills acquired by the
student ................................................ .....................................
14
Machine Translated by Google
INTRODUCTION
1. EXPLANATORY NOTE
– study of aircraft power plants, and the ability to manage and control parameters, to know
the correct actions in the event of a power plant failure during flight. know the procedure
of actions according to the manual for the flight operation of the aircraft (AFM) during the
procedure of pre-flight preparation (PFI) of the aircraft before the flight 1.2. Learning
outcomes that the academic discipline makes possible to achieve. Understanding of the
design of the airframe of the aircraft and its components, namely: AFM (Flight Operations
Manual) (AFM), MTO (Maintenance Manual) (AMM), of the appropriate type of aircraft.
Understanding the design of an aircraft engine and its components, namely:
1.4. Interdisciplinary
connections. Interdisciplinary connections of the academic discipline: is
based on the knowledge of such disciplines as: "Higher mathematics",
"Physics", "Operational procedures", "Aerodynamics and flight dynamics of
aircraft" and is the basis for studying further disciplines, namely: "Aviation
characteristics and planning", "Navigation", "Principles of flight".
Module No. 3 "General information on the design of the aircraft power plant".
Integrated requirements of module #3: as a result of studying the module
Pract.
Lab./ Pract.
Lab./
That's
all That's
all
6
1 2 3 4 5 78 9
10
___
Hydromechanics and basic
2.1
principles. Pascal's law, energy 6 1 1 4
transfer, basic principles of
hydromechanics. Types of hydraulic
fluids used in aviation. Characteristics
of these liquids and their limitations.
2.2 System elements: diagram, operation, 8 1 3 4
limited operation mode, indication and
warning.
Machine Translated by Google
2.5 11 1 5 5
2.6 6 1 2 3
Machine Translated by Google
elements
3.1 22 2 14 6
Machine Translated by Google
3.3 3 1 1 1
8 8
50 4 23 24
210 17 85 108 210 17 85
108
2.5. List of questions for preparation for the exam and the final test.
The list of questions and the content of tasks for preparation for the exam are
developed by the leading teacher of the department in accordance with
the work program, approved at the meeting of the department and brought to
the attention of students.
Machine Translated by Google
3.2.2. . A.S. Ormina, M.G. Kruglova, Internal combustion engines. 4th edition, Moscow,
Machine building, 1990, 284 p. 3.2.3. . V.M. Korneev, Design features of gas turbine engines,
ed. Litagen Ridero 2010, 328 3.2.4. Order of the State Aviation Service of Ukraine
dated July 20, 2017 No. 565 (Registered in the Ministry of Justice of Ukraine on August 28,
2017 under No. 1056/30924) "On approval of the Aviation Rules of Ukraine "Technical
requirements and administrative procedures for flight crews of civil aviation". 3.2.5. Order of
the State Aviation Service of Ukraine dated March 12, 2018 No. 220 "Acceptable compliance
methods (AMS) and instructional material (GM) clarifying the provisions of the Aviation Rules
of Ukraine "Technical requirements and administrative procedures for civil aviation flight
crews".
3.2.6. Order of the State Aviation Service of Ukraine dated July 5, 2018 No. 682
(Registered in the Ministry of Justice of Ukraine on September 27, 2018 under No. 1109/32561)
"On approval of the Aviation Rules of Ukraine "Technical requirements and administrative
procedures for flight operation in civil aviation". 3.2.7. Order of the State Aviation Service of
Ukraine dated March 6, 2019 No. 286 (Registered in the Ministry of Justice of Ukraine on
March 28, 2019 under No. 316/33287) "On Approval of the Aviation Rules of Ukraine
"Maintaining the Airworthiness of Aircraft and Aircraft Products,
Machine Translated by Google
Supporting literature
3.2.9. The Law of Ukraine "On the National Adaptation Program
legislation of Ukraine to the legislation of the European Union".
3.2.10. Regulation of the European Commission dated November 3, 2011
(EU) No. 1178/2011 (as amended by March 30, 2012 No. 290/2012 and March 13,
2014 No. 245/2014). 3.2.11. Regulation of the European Parliament and the Council
of February 20, 2008 (EC) No. 216/2008. 3.2.12. KLE (AFM), KTO (AMM)
aircraft "Tecnam P2002-JF" 3.2.13. KLE (AFM), KTO (AMM) plane "K-10 Swift"
3.2.14. KLE (AFM), KTO (AMM) aircraft "Cessna-172S"
Table 4.1
Assessment of individual types of student academic work Type of academic
work Maximum number of points
Full-time education
1st semester (different
credit) Module No. 1 "General information on the construction of airframes"
Performance and protection of laboratory work #1-5 (5x56.) 15 (5x3 b.)
Doing homework 8
10
Total by module #3 30
Semester exam Total by 20
discipline 100
Machine Translated by Google
(F 03.02 – 01)
DOCUMENT DISTRIBUTION SHEET
Date
of issue P.I.B. receiver Notes
No. note Recipient's signature
Transferred to (unit)
(F 03.02 – 02)
DOCUMENT ACQUISITION SHEET Signature of the
No
informed person The
Full Name date is known Notes
cf. lenience
(F 03.02 – 04)
AUDIT REGISTRATION SHEET
No Adequacy
Full Name Revision date Signature
conclusion
cf.
(F 03.02 – 03)
CHANGE ACCOUNTING SHEET
Machine Translated by Google
(F 03.02 – 32)
AGREEMENT OF CHANGES
Developer
Agreed Agreed
Agreed