Professional Documents
Culture Documents
TEST1
TEST1
TEST1
Removal
CAUTION:
- Use fender covers to avoid damaging painted surfaces.
- To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
NOTE:
- Mark all wiring and hoses to avoid mis-connection.
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 1/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 2/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
6. Remove the transaxle wire harness connectors and control cable from transaxle.
(1)Disconnect the transaxle range switch connector(A).
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 3/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 4/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 5/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
9. Install the special tools(09200-38001), the engine support fixture and the adapter, on the engine assembly.
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 6/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
Tightening torque :
70 - 95Nm (700 - 950kgf.cm, 50 - 69lb-ft)
Tightening torque :
50 - 65Nm (500 - 650kgf.cm, 36 - 47lb-ft)
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 7/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
Tightening torque :
50 - 65Nm (500 - 650kgf.cm, 36 - 47lb-ft)
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 8/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
Tightening torque :
35 - 45Nm (350 - 450kgf.cm, 25 - 32lb-ft)
17. Separate the tie rod end(A) from the pin(B) and nut(C).
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 9/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
19. Remove the front caliper(A) and use a wire to secure the caliper to the vehicle so that it is out of the way.
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 10/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 11/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
NOTE:
When supporting the transaxle assembly, make sure that the weight is applied to a wide area of the jack surface.
Tightening torque :
Bolts(A): 40 - 50Nm(400 - 550Kgf.cm, 29 - 40lb-ft)
Nuts(B): 160 - 180Nm(1600 - 1800Kgf.cm, 110 - 126lb-ft)
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 12/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
Tightening torque :
27 - 34Nm (270 - 340kgf.cm, 19 - 24lb-ft)
Tightening torque :
46 - 53Nm (460 - 530kgf.cm, 33 - 38lb-ft)
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 13/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
Tightening torque :
Bolts(12mm): 60 - 80Nm(600 - 800Kgf.cm, 43 - 58lb-ft)
Bolts(10mm): 43 - 55Nm(430 - 550Kgf.cm, 32 - 41lb-ft)
CAUTION:
Be careful not damage the other parts during removal.
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 14/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
Installation
1. Attach the torque converter on the transaxle side and mount the transaxle assembly onto the engine.
CAUTION:
If the torque converter is mounted first on the engine, the oil seal on the transaxle may be damaged.
Therefore, be sure to first assemble the torque converter to the transaxle.
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 15/16
1/29/2021 Repair procedures (A4AF3) (Automatic Transmission/Transaxle) - ALLDATA Repair
https://my.alldata.com/repair/#/repair/article/45872/component/844/itype/401/nonstandard/835906/selfRefLink/true 16/16