Professional Documents
Culture Documents
How To Build A Hobbit Hole
How To Build A Hobbit Hole
A HOBBIT-HOLE
© 2019 New Line Productions, Inc. All rights reserved. The Lord of the Rings: The Fellowship of the Ring, The Lord of the Rings: The Two Towers, The Lord of the
Rings: The Return of the King and the names of the characters, items, events and places therein are trademarks of The Saul Zaentz Company d/b/a Middle-earth
Enterprises under license to New Line Productions, Inc.
All quotations from J.R.R. Tolkien’s literary trilogy The Lord of the Rings (including any of the volumes thereof)
© The Tolkien Estate 1954-55, 1966.
© Copyright Games Workshop Limited 2019. Citadel and Games Workshop are ® and all associated logos are either ® or TM and/or © Games Workshop Limited.
1. GATHER YOUR PIECES
The Hobbit-hole upgrade set has a variety of different pieces for you to use to make your own Hobbit-hole. There
is a front piece that is reversible so, you can choose which side you want to use for your own Hobbit-hole, as well
as two windows and two chimney stacks to add that extra layer of detail.
2. EXTRA MATERIALS
You will also require additional
materials in order to make your
Hobbit-hole. This includes some
form of styrofoam or polystyrene, a
piece of 3mm MDF board (though
thick card works just as well), some
strong double-sided sticky tape and
a variety of different flocks, tufts and
static grass.
3. BASIC SHAPE
The first thing you will need to do is cut your
styrofoam into the very rough shape that you
want your Hobbit-hole to be in. Use the MDF or
card as a base is a good place to start – though
don’t stick it down just yet!
Next, you will need to cut a small indent into
the foam, and stick your chosen front to it using
double-sided sticky tape. Don’t use superglue for
this as it will dissolve the styrofoam.
Hobbit-holes come in various different shapes
and sizes, so there are really no restrictions for
how you want yours to be shaped – it is entirely
up to you!
4. DOUBLE-SIDED TAPE 5. ADD HEIGHT
Next, you will need to add some more double- Add more layers of styrofoam to the top of your
sided sticky tape to the top of your Hobbit-hole. Hobbit-hole to give the height you are after.
You don’t need to put it all the way to the edges How much height you want to add is entirely up to
though as you will be cutting out the shape of the you. Some Hobbit-holes are much smaller and may
Hobbit-hole later on anyway. require no extra height to be added at all; whilst for
others you may wish to make them bigger to make
them stand out even more.
7. COBBLESTONES
To make the cobblestones outside the front
door of your Hobbit-hole, gently score the
foam in order to create the shape of them.
For more rigid and pointed stones, a scalpel
or other sharp implement is great. However,
if you want your cobblestones to have a more
rounded look then drawing the shape of the
stones out using a ballpoint pen first works
really well.
8. SAND IT AND ADD
WINDOWS AND CHIMNEYS
Next, you will need to contour the Hobbit-hole using 9. UNDERCOAT
sandpaper. Then add the chimneys and windows. Press Your Hobbit-hole is ready for painting! Spray the
them gently into the foam where you want them to whole model with Chaos Black spray.
go to create an indent, then stick them down using
double-sided sticky tape.
17. FLOWERS
To further add some interest to your Hobbit-hole, you could add some flowers to the outside – after all, Hobbits
do love things that grow!