Professional Documents
Culture Documents
@airbus: Component Maintenance Manual With Illustrated Part List
@airbus: Component Maintenance Manual With Illustrated Part List
@airbus: Component Maintenance Manual With Illustrated Part List
AIRBUS S.A.S.
Customer Services
Technical Data Support and Services
31707 Blagnac Cedex
FRANCE
FAPE3
PASSENGER SERVICE
INFORMATION UNIT, 2042VU
PN : D9259006000200 D9259006000600
D9259006000800 D9259006001000
D9259006001200 D9259006001400
D9259006001600 D9259006001800
D9259006002000 D9259006002400
D9259006002600 D9259006002800
D9259006003000 D9259006003200
D9259006003400 D9259006003600
FAPE3
D9259006003800 D9259006004000
D9259006004200 D9259006004400
D9259006004600 D9259006004800
D9259006005000 D9259006005200
D9259006005400 D9259006005600
D9259006005800 D9259006006000
D9259006006200 D9259006006400
9 9
D9259006006600 D9259006006800
9 9
D9259006007000 D9259006008200
9 9
D9259006008400 D9259006009000
9 9
FAPE3
D9259006009200 D9259006009400
9 9
D9259006010000 D9259006010200
9 9
D9259006010400 D9259006010600
9 9
D9259006010800 D9259006011000
9 9
D9259006011200 D9259006011400
9 9
D9259006011600 D9259030003000
9 9
D9259030003200 D9259030003600
9 9
D9259030004000 D9259030004200
9 9
FAPE3
D9259030004400 D9259030004600
9
D9259030004800 D9259030005000
9 9
D9259030005200 D9259030008000
9
D9259030009200 D9259030009600
D9259030010000 D9259030010200
D9259030010400 D9259030010800
D9259030011000 D9259030011200
D9259030011600 D9259030011800
D9259051000000 D9259051000200
D9259051000400 D9259051000600
HIGHLIGHTS
HIGHLIGHTS
Page 1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jan 01/16
FIGURE 23-73-54-991-001-A01
Jan 01/16
TASK 23-73-54-870-803-A01
Jan 01/16
FIGURE 23-73-54-991-002-A01
Jan 01/16
Subtask 23-73-54-750-001-A01
Jan 01/16
TASK 23-73-54-700-802-A01
Jan 01/16
Subtask 23-73-54-750-002-A01
Jan 01/16
FIGURE 23-73-54-991-003-A01
Jan 01/16
FIGURE 23-73-54-991-004-A01
DISASSEMBLY
L.E.C.
Page 1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jul 01/15
Subtask 23-73-54-010-001-A01
Jul 01/15
Subtask 23-73-54-010-001-B01
Jul 01/15
Subtask 23-73-54-010-001-C01
Jul 01/15
Subtask 23-73-54-010-001-D01
Jul 01/15
Subtask 23-73-54-010-001-E01
Jul 01/15
Subtask 23-73-54-010-001-F01
Jul 01/15
Subtask 23-73-54-010-001-G01
Jan 01/16
TASK 23-73-54-010-801-B01
Jan 01/16
Subtask 23-73-54-010-007-A01
Jan 01/16
Subtask 23-73-54-010-007-B01
Jan 01/16
Subtask 23-73-54-010-007-C01
Jan 01/16
Subtask 23-73-54-010-007-D01
Jan 01/16
Subtask 23-73-54-010-007-E01
Jan 01/16
TASK 23-73-54-010-801-C01
Jan 01/16
Subtask 23-73-54-010-015-A01
Jan 01/16
Subtask 23-73-54-010-015-B01
L.E.C.
Page 2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jan 01/16
TASK 23-73-54-010-801-D01
Jan 01/16
Subtask 23-73-54-010-016-A01
Jan 01/16
TASK 23-73-54-010-801-E01
Jan 01/16
Subtask 23-73-54-010-017-A01
Jul 01/15
TASK 23-73-54-010-802-A01
Jul 01/15
Subtask 23-73-54-010-002-A01
Jul 01/15
Subtask 23-73-54-010-002-C01
Jul 01/15
Subtask 23-73-54-010-002-D01
Jan 01/16
Subtask 23-73-54-010-002-E01
Jan 01/16
Subtask 23-73-54-010-002-F01
Jul 01/15
Subtask 23-73-54-010-002-G01
Jan 01/16
TASK 23-73-54-010-802-B01
Jan 01/16
Subtask 23-73-54-010-006-A01
Jan 01/16
Subtask 23-73-54-010-006-B01
Jan 01/16
Subtask 23-73-54-010-006-C01
Jan 01/16
TASK 23-73-54-010-802-C01
L.E.C.
Page 3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jan 01/16
Subtask 23-73-54-010-012-B01
Jan 01/16
Subtask 23-73-54-010-012-C01
Jan 01/16
TASK 23-73-54-010-802-D01
Jan 01/16
Subtask 23-73-54-010-013-A01
Jan 01/16
TASK 23-73-54-010-802-E01
Jan 01/16
Subtask 23-73-54-010-014-A01
Jan 01/16
Subtask 23-73-54-010-014-B01
Jul 01/15
TASK 23-73-54-010-803-A01
Jul 01/15
Subtask 23-73-54-010-003-A01
Jul 01/15
Subtask 23-73-54-010-003-B01
Jul 01/15
Subtask 23-73-54-010-003-C01
Jul 01/15
Subtask 23-73-54-010-003-D01
Jul 01/15
Subtask 23-73-54-010-003-E01
Jul 01/15
Subtask 23-73-54-010-003-F01
Jan 01/16
TASK 23-73-54-010-803-B01
Jan 01/16
Subtask 23-73-54-010-005-A01
L.E.C.
Page 4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jan 01/16
Subtask 23-73-54-010-005-C01
Jan 01/16
TASK 23-73-54-010-803-C01
Jan 01/16
Subtask 23-73-54-010-008-A01
Jan 01/16
TASK 23-73-54-010-803-D01
Jan 01/16
Subtask 23-73-54-010-010-A01
Jan 01/16
TASK 23-73-54-010-803-E01
Jan 01/16
Subtask 23-73-54-010-011-A01
Jan 01/16
TASK 23-73-54-010-804-A01
Jul 01/15
Subtask 23-73-54-010-004-A01
Jul 01/15
Subtask 23-73-54-010-004-B01
Jul 01/15
Subtask 23-73-54-010-004-C01
Jul 01/15
Subtask 23-73-54-010-004-D01
Jul 01/15
Subtask 23-73-54-010-004-E01
Jan 01/16
TASK 23-73-54-010-804-B01
Jan 01/16
Subtask 23-73-54-010-018-A01
Jan 01/16
Subtask 23-73-54-010-018-B01
L.E.C.
Page 5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jan 01/16
Subtask 23-73-54-010-019-A01
Jan 01/16
TASK 23-73-54-010-804-D01
Jan 01/16
Subtask 23-73-54-010-020-A01
Jan 01/16
TASK 23-73-54-010-804-E01
Jan 01/16
Subtask 23-73-54-010-021-A01
CLEANING
Jan 01/16
TASK 23-73-54-100-801-A01
Jan 01/16
Subtask 23-73-54-100-001-A01
INSPECTION/CHECK
Jan 01/16
TASK 23-73-54-210-801-A01
Jan 01/16
Subtask 23-73-54-220-001-A01
REPAIR
Jan 01/16
TASK 23-73-54-300-801-A01
Jan 01/16
Subtask 23-73-54-300-001-A01
Jan 01/16
TASK 23-73-54-300-802-A01
Jan 01/16
Subtask 23-73-54-300-003-A01
Jan 01/16
TASK 23-73-54-300-803-A01
L.E.C.
Page 6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jan 01/16
Subtask 23-73-54-300-004-B01
Jan 01/16
Subtask 23-73-54-300-004-C01
Jan 01/16
Subtask 23-73-54-300-004-D01
Jan 01/16
TASK 23-73-54-300-804-A01
Jul 01/15
Subtask 23-73-54-300-005-A01
Jul 01/15
Subtask 23-73-54-300-005-B01
Jul 01/15
Subtask 23-73-54-300-005-C01
Jan 01/16
Subtask 23-73-54-300-005-D01
Jan 01/16
Subtask 23-73-54-300-005-E01
Jan 01/16
Subtask 23-73-54-300-005-F01
Jan 01/16
Subtask 23-73-54-300-005-G01
Jan 01/16
Subtask 23-73-54-300-005-H01
Jan 01/16
Subtask 23-73-54-300-005-J01
ASSEMBLY
Jan 01/16
TASK 23-73-54-410-801-A01
Jul 01/15
Subtask 23-73-54-410-001-A01
L.E.C.
Page 7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jul 01/15
Subtask 23-73-54-410-001-C01
Jul 01/15
Subtask 23-73-54-410-001-D01
Jan 01/16
Subtask 23-73-54-410-001-E01
Jan 01/16
TASK 23-73-54-410-801-B01
Jan 01/16
Subtask 23-73-54-410-017-A01
Jan 01/16
Subtask 23-73-54-410-017-B01
Jan 01/16
TASK 23-73-54-410-801-C01
Jan 01/16
Subtask 23-73-54-410-018-A01
Jan 01/16
TASK 23-73-54-410-801-D01
Jan 01/16
Subtask 23-73-54-410-019-A01
Jan 01/16
TASK 23-73-54-410-801-E01
Jan 01/16
Subtask 23-73-54-410-020-A01
Jul 01/15
TASK 23-73-54-410-802-A01
Jul 01/15
Subtask 23-73-54-410-002-A01
Jul 01/15
Subtask 23-73-54-410-002-B01
Jul 01/15
Subtask 23-73-54-410-002-C01
L.E.C.
Page 8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jan 01/16
Subtask 23-73-54-410-002-E01
Jul 01/15
Subtask 23-73-54-410-002-F01
Jan 01/16
TASK 23-73-54-410-802-B01
Jan 01/16
Subtask 23-73-54-410-007-A01
Jan 01/16
Subtask 23-73-54-410-007-B01
Jan 01/16
Subtask 23-73-54-410-007-C01
Jan 01/16
TASK 23-73-54-410-802-C01
Jan 01/16
Subtask 23-73-54-410-014-A01
Jan 01/16
TASK 23-73-54-410-802-D01
Jan 01/16
Subtask 23-73-54-410-015-A01
Jan 01/16
TASK 23-73-54-410-802-E01
Jan 01/16
Subtask 23-73-54-410-016-A01
Jul 01/15
TASK 23-73-54-410-803-A01
Jul 01/15
Subtask 23-73-54-410-003-A01
Jul 01/15
Subtask 23-73-54-410-003-B01
Jul 01/15
Subtask 23-73-54-410-003-D01
L.E.C.
Page 9
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jul 01/15
Subtask 23-73-54-410-003-F01
Jul 01/15
Subtask 23-73-54-410-003-G01
Jan 01/16
TASK 23-73-54-410-803-B01
Jan 01/16
Subtask 23-73-54-410-006-A01
Jan 01/16
Subtask 23-73-54-410-006-B01
Jan 01/16
Subtask 23-73-54-410-006-C01
Jan 01/16
TASK 23-73-54-410-803-C01
Jan 01/16
Subtask 23-73-54-410-011-A01
Jan 01/16
Subtask 23-73-54-410-011-B01
Jan 01/16
Subtask 23-73-54-410-011-C01
Jan 01/16
TASK 23-73-54-410-803-D01
Jan 01/16
Subtask 23-73-54-410-012-A01
Jan 01/16
TASK 23-73-54-410-803-E01
Jan 01/16
Subtask 23-73-54-410-013-A01
Jan 01/16
Subtask 23-73-54-410-013-B01
Jul 01/22
TASK 23-73-54-410-804-A01
L.E.C.
Page 10
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jul 01/22
Subtask 23-73-54-410-004-B01
Jul 01/22
Subtask 23-73-54-410-004-C01
Jul 01/22
Subtask 23-73-54-410-004-D01
Jul 01/22
Subtask 23-73-54-410-004-E01
Jul 01/22
Subtask 23-73-54-410-004-F01
Jul 01/22
Subtask 23-73-54-410-004-G01
Jul 01/22
TASK 23-73-54-410-804-B01
Jul 01/22
Subtask 23-73-54-410-005-A01
Jul 01/22
Subtask 23-73-54-410-005-B01
Jul 01/22
Subtask 23-73-54-410-005-C01
Jul 01/22
Subtask 23-73-54-410-005-D01
Jul 01/22
Subtask 23-73-54-410-005-E01
Jul 01/22
TASK 23-73-54-410-804-C01
Jul 01/22
Subtask 23-73-54-410-008-A01
Jul 01/22
Subtask 23-73-54-410-008-B01
Jul 01/22
Subtask 23-73-54-410-008-C01
L.E.C.
Page 11
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jul 01/22
Subtask 23-73-54-410-009-A01
Jan 01/16
TASK 23-73-54-410-804-E01
Jan 01/16
Subtask 23-73-54-410-010-A01
Oct 01/20
Subtask 23-73-54-550-003-A01
Jul 01/15
VENDOR LIST
Figure 01
Jul 01/15
FIGURE 23-73-54-991-801-001
Jul 01/15
Parts List
Figure 01A
Jul 01/15
FIGURE 23-73-54-991-801-A01
Jul 01/15
Parts List
Figure 01B
Jul 01/15
FIGURE 23-73-54-991-801-B01
Jul 01/15
Parts List
Figure 01C
L.E.C.
Page 12
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Jul 01/15
Parts List
Figure 01D
Jul 01/15
FIGURE 23-73-54-991-801-D01
Jul 01/15
Parts List
Figure 02
Jan 01/16
FIGURE 23-73-54-991-802-001
Jan 01/16
Parts List
Figure 02A
Jul 01/15
FIGURE 23-73-54-991-802-A01
Jan 01/16
Parts List
Figure 03
Jan 01/16
FIGURE 23-73-54-991-803-001
Jan 01/16
Parts List
Figure 04
Jan 01/16
FIGURE 23-73-54-991-804-001
Jan 01/16
Parts List
Figure 05
Jan 01/16
FIGURE 23-73-54-991-805-001
Jan 01/16
Parts List
L.E.C.
Page 13
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TABLE OF CONTENTS
INTRODUCTION
23-73-54-871-801-A01 Introduction
DISASSEMBLY
23-73-54-010-801-A01 Removal of the Wiring Harness
23-73-54-010-801-B01 Removal of the Wiring Harness
23-73-54-010-801-C01 Removal of the Wiring Harness
23-73-54-010-801-D01 Removal of the Wiring Harness
23-73-54-010-801-E01 Removal of the Wiring Harness
23-73-54-010-802-A01 Removal of the Power Unit and the Reading Light
23-73-54-010-802-B01 Removal of the Power Unit and the Reading Light
23-73-54-010-802-C01 Removal of the Power Unit and the Reading Light
23-73-54-010-802-D01 Removal of the Power Unit and the Reading Light
23-73-54-010-802-E01 Removal of the Power Unit and the Reading Light
23-73-54-010-803-A01 Removal of the Loudspeaker
23-73-54-010-803-B01 Removal of the Loudspeaker
23-73-54-010-803-C01 Removal of the Loudspeaker
23-73-54-010-803-D01 Removal of the Loudspeaker
23-73-54-010-803-E01 Removal of the Loudspeaker
23-73-54-010-804-A01 Removal of the Attendant Indication Panel
23-73-54-010-804-B01 Removal of the Attendant Indication Panel
23-73-54-010-804-C01 Removal of the Attendant Indication Panel
23-73-54-010-804-D01 Removal of the Attendant Indication Panel
23-73-54-010-804-E01 Removal of the Attendant Indication Panel
CLEANING
23-73-54-100-801-A01 Cleaning
INSPECTION/CHECK
23-73-54-210-801-A01 Check of the PSIU
T.O.C.
Page 1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
REPAIR
23-73-54-300-801-A01 Repair of the Cable Bundle
23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
23-73-54-300-803-A01 Replacement of the Power Unit
23-73-54-300-804-A01 Replacement of the Identification Plates
ASSEMBLY
23-73-54-410-801-A01 Installation of the Attendant Indication Panel
23-73-54-410-801-B01 Installation of the Attendant Indication Panel
23-73-54-410-801-C01 Installation of the Attendant Indication Panel
23-73-54-410-801-D01 Installation of the Attendant Indication Panel
23-73-54-410-801-E01 Installation of the Attendant Indication Panel
23-73-54-410-802-A01 Installation of the Loudspeaker
23-73-54-410-802-B01 Installation of the Loudspeaker
23-73-54-410-802-C01 Installation of the Loudspeaker
23-73-54-410-802-D01 Installation of the Loudspeaker
23-73-54-410-802-E01 Installation of the Loudspeaker
23-73-54-410-803-A01 Installation of the Power Unit and the Reading Light
23-73-54-410-803-B01 Installation of the Power Unit and the Reading Light
23-73-54-410-803-C01 Installation of the Power Unit and the Reading Light
23-73-54-410-803-D01 Installation of the Reading Light
23-73-54-410-803-E01 Installation of the Reading Light
23-73-54-410-804-A01 Installation of the Wiring Harness
23-73-54-410-804-B01 Installation of the Wiring Harness
23-73-54-410-804-C01 Installation of the Wiring Harness
23-73-54-410-804-D01 Installation of the Wiring Harness
23-73-54-410-804-E01 Installation of the Wiring Harness
T.O.C.
Page 2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
SBL
Page 1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
INTRODUCTION
TASK 23-73-54-871-801-A01
Introduction
1. General
A. This CMM supersede the Repair Manual 23-73-54 with immediate effect.
B. This manual is written to the iSpec 2200 and in ASD Simplified Technical English (STE).
The international SI units of measurement are used in this manual, with imperial units
shown in parentheses.
C. Only approved persons with the necessary skills are permitted to do the maintenance
procedures in this manual.
D. Maintenance Task Oriented Support System (MTOSS) task and subtask identification is
used in this manual. The maintenance tasks and other data have special MTOSS numbers
for Electronic Data Processing (EDP). The user of the manual can ignore the MTOSS
numbers.
INTRO
Page 1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
A. Make sure that the manual contains the information applicable to your component.
B. If you need to identify a part or find a part number, use the search function.
C. You must use the instructions in this manual for all the component maintenance. Read all
the applicable WARNINGS and CAUTIONS before you do the work on the component.
3. List of Abbreviations
AC Alternating Current
AIP Attendant Indication Panel
AECMA European Association of Aerospace Industries
AMM Aircraft Maintenance Manual
ANSI American National Standards Institute
AP Airbus Procedure
ASD AeroSpace and Defence Industries Association of Europe
ATA Air Transport Association of America
ATE Automatic Test Equipment
BITE Built-In Test Equipment
CDIM Component Data Instruction Manual
CIDS Cabin Intercommunication Data System
CML Consumable Material List
EDP Electronic Data Processing
ESPM Electrical Standard Practices Manual
FSB Fasten Seat Belt
IEC International Electrotechnical Commission
IPC Illustrated Parts Catalog
IPL Illustrated Parts List
ISO International Standardization Organization
LH Left Hand
LRU Line Replaceable Unit
MTOSS Maintenance Task Oriented Support System
NHA Next Higher Assembly
NI/ALPH Numeric Index/Alphabetical
NS No Smoking
N/S Non Smoker
NTM Nondestructive Testing Manual
INTRO
Page 2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
INTRO
Page 3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-870-802-A01
General
1. The Passenger Service Information Unit (PSIU) is a part of the Cabin Intercommunication Data
System (CIDS). See FIGURE 23-73-54-991-001-A for the PSIU.
2. The PSIU is a combipanel which is installed in the AFT entrance area. The PSIU holds:
- A loudspeaker
- A reading light and a power unit
- An attendant indication panel.
3. Technical Data
Length: 228.6 mm (9.00 in.)
Width: 260 mm (10.23 in.)
Height: 100 mm (3.93 in.)
Weight (approximate): 570 g (1.25 lb)
Technical Data Table
Page 1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
F_CM_237354_1_0010101_01_00
Page 3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-870-803-A01
Description and Operation
1. Description
2. Operation
A. The Loudspeaker
(1) The loudspeaker is supplied with an audio signal (Audio Hi/Audio Lo) from the CIDS
system.
(1) The power unit is supplied with 115 V AC and supplies the reading light with DC
power. The operation of the reading light and the power unit is monitored by the
CIDS system. A failure of the reading light or the power unit will be found by the CIDS
system.
(1) The AIP is a component of the CIDS system. For detailed description and operation of
the AIP, see CMMV 23-73-22.
Page 4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
LOUDSPEAKER
PSIU
POWER UNIT
READING LIGHT
F_CM_237354_1_0020101_01_00
Page 6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-700-801-A01
Test of the Loudspeaker
1. General
- The test of the reading light and the power unit is a functional test.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
- See DISASSEMBLY and ASSEMBLY for the replacement of the parts which are not
permanently attached.
- See CMMV 23-73-22_C9072 for the TEST of the Attendant Indication Panel.
- See CMMV 33-20-10_C9072 for the TEST of the power unit.
- See CMMV 33-22-04_D8095 or CMMV 33-22-06_D8095 or CMMV 33-22-35_D8095 for the
TEST of the reading light.
Page 1001
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
B. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-878-804-A01 Wiring Diagrams
CMMV 23-73-22_C9072
CMMV 33-20-10_C9072
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
Referenced Information
3. Procedure
Subtask:23-73-54-750-001-A01
A. Test of the Loudspeaker
NOTE : All pins in the TABLE are at the main connector of the PSIU.
NOTE : See WIRING DIAGRAM Task TASK 23-73-54-878-804-A01 for the electrical
connection. The wiring diagram includes the most of the possible variants of the
PSIU.
Page 1002
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
POSSIBLE FAULT,
ACTION RESULT
CORRECTIVE ACTION
Distortion max. 5%
Test of the Loudspeaker
Page 1003
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-700-802-A01
Test of the Reading Light and the Power Unit
1. General
- The test of the reading light and the power unit is a functional test.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
- See DISASSEMBLY and ASSEMBLY for the replacement of the parts which are not
permanently attached.
- See CMMV 23-73-22_C9072 for the TEST of the Attendant Indication Panel.
- See CMMV 33-20-10_C9072 for the TEST of the power unit.
- See CMMV 33-22-04_D8095 or CMMV 33-22-06_D8095 or CMMV 33-22-35_D8095 for the
TEST of the reading light.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-878-804-A01 Wiring Diagrams
CMMV 23-73-22_C9072
CMMV 33-20-10_C9072
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
Page 1004
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
REFERENCE DESIGNATION
CMMV 33-22-35_D8095
Referenced Information
3. Procedure
Subtask:23-73-54-750-002-A01
A. Test of the Reading Light and the Power Unit
NOTE : All pins in the TABLE are at the main connector of the PSIU.
NOTE : See WIRING DIAGRAM Task TASK 23-73-54-878-804-A01 for the electrical
connection. The wiring diagram includes the most of the possible variants of the
PSIU.
Page 1005
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-878-804-A01
Wiring Diagrams
1. Wiring Diagrams
See FIGURE 23-73-54-991-003-A and FIGURE 23-73-54-991-004-A for the wiring diagrams of
the PSIU.
NOTE : The wiring diagrams shown in FIGURE 23-73-54-991-003-A and FIGURE 23-73-54-
991-004-A are for typical PSIU. Other PSIU may have different wiring diagrams.
Page 2001
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 2002
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
V F LAMP 2
L K TEST
M H RL FAIL
N J PCB FAIL
P C TEST GROUND GROUND POSITION
W A 115V
X B GROUND
14LZ
ATTENDANT
WORK LIGHT
13LZ
POWER UNIT FOR
WORK LIGHT
+POINT
Y
Z
554RH
7250VC 2042VUA
F_CM_237354_1_0030101_01_00
Page 2003
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 2004
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
7250VCA
+POINT
554RH
Y
Z
RL 2 ON F V
POS.2
POS
14LZ ATTN
WORK LT
GND
GND.2
RL TEST K L
RL PCB FAIL J N
RL LAMP FAIL H M
AC GND OUTPUT C P
AC GND INPUT B X
WORK LIGHT 115 VAC INPUT A W
POWER UNIT
13LZ
115VAC A E
7002VS
AC GND B G
2042VUA
F_CM_237354_1_0040101_01_00
Page 2005
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
DISASSEMBLY
TASK 23-73-54-010-801-A01
Removal of the Wiring Harness
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3001
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-001-A01
A. Removal of the Wiring Harness
(1) Remove the coupling screws 01-340, the receptacle connector 01-320 and the
backshell assembly 01-330 from the attendant indication panel 01-310.
(3) Remove the cables with the cable terminals 01-130 and the insulations 01-140 from
the loudspeaker 01-300.
(4) Remove the screw 01-080, the washer 01-090, the spacer 01-050 and the clamp 01-
070.
(6) Remove the wiring harness from the attendant info panel assembly 01-010.
Subtask:23-73-54-010-001-B01
B. Removal of the Wiring Harness
(1) Remove the coupling screws 01A-340, the receptacle connector 01A-320 and the
backshell assembly 01A-330 from the attendant indication panel 01A-310.
Page 3002
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(3) Remove the cables with the cable terminals 01A-130 and the insulations 01A-140 from
the loudspeaker 01A-300.
(4) Remove the screws 01A-260, the washers 01A-270, the nuts 01A-280 and the clamps
01A-070 and 01A-075.
Subtask:23-73-54-010-001-C01
C. Removal of the Wiring Harness
(1) Remove the plug connector 01B-530 from the power unit 01B-520.
(2) Remove the cable terminals 01B-450 with the housings 01B-460 from the reading light
01B-370.
(3) Remove the sliding lock retainer 01B-510, the receptacle connector 01B-320, the
backshell 01B-330 from the attendant indication panel 01B-550.
(5) Remove the cables with the cable terminals 01B-130 and the insulations 01B-140 from
the loudspeaker 01B-580.
(6) Remove the screws 01B-080, the washers 01B-090, the spacer 01B-050 and the
clamp 01B-070.
(7) Remove the sleeve 01B-385 and the identification sleeves 01B-390 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 01B-010.
Page 3003
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-001-D01
D. Removal of the Wiring Harness
(1) Remove the plug connector 01C-530 from the power unit 01C-520.
(2) Remove the cable terminals 01C-450 with the housings 01C-460 from the reading light
01C-370.
(3) Remove the coupling screws 01C-340, the receptacle connector 01C-320, the
backshell assembly 01C-330 from the attendant indication panel 01C-550.
(5) Remove the cables with the cable terminals 01C-130 and the insulations 01C-140 from
the loudspeaker 01C-580.
(6) Remove the screws 01C-080, the washers 01C-090, the spacer 01C-050 and the
clamp 01C-070.
(7) Remove the sleeve 01C-385, the identification sleeves 01C-390 and the splices 01C-
570 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 01C-010.
Subtask:23-73-54-010-001-E01
E. Removal of the Wiring Harness
(1) Remove the plug connector 01C-530 from the power unit 01C-520.
(2) Remove the cable terminals 01C-450 with the housings 01C-460 from the reading light
01C-560.
Page 3004
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(3) Remove the coupling screws 01C-340, the receptacle connector 01C-320, the
backshell assembly 01C-330 from the attendant indication panel 01C-550.
(5) Remove the cables with the cable terminals 01C-130 and the insulations 01C-140 from
the loudspeaker 01C-540.
(6) Remove the screws 01C-080, the washers 01C-090, the spacer 01C-050 and the
clamp 01C-070.
(7) Remove the sleeve 01C-385, the identification sleeves 01C-390 and the splices 01C-
570 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 01C-010.
Subtask:23-73-54-010-001-F01
F. Removal of the Wiring Harness
(1) Remove the plug connector 01D-530 from the power unit 01D-520.
(2) Remove the cable terminals 01D-450 with the housings 01D-460 from the reading light
01D-370.
(3) Remove the sliding lock retainer 01D-510, the receptacle connector 01D-320 and the
backshell 01D-330 from the attendant indication panel 01D-550.
(5) Remove the cables with the cable terminals 01D-130 and the insulations 01D-140 from
the loudspeaker 01D-580.
(6) Remove the screws 01D-080, the washers 01D-090, the spacer 01D-050 and the
clamp 01D-070.
(7) Remove the sleeve 01D-385, the identification sleeves 01D-390 and the splices 01D-
570 from the cables.
Page 3005
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(8) Remove the wiring harness from the attendant info panel assembly 01D-010.
Subtask:23-73-54-010-001-G01
G. Removal of the Wiring Harness
(1) Remove the plug connector 01D-530 from the power unit 01D-520.
(2) Remove the cable terminals 01D-450 with the housings 01D-460 from the reading light
01D-370.
(3) Remove the receptacle connector 01D-320 and the backshell 01D-330 from the
attendant indication panel 01D-550.
(5) Remove the cables with the cable terminals 01D-130 and the insulations 01D-140 from
the loudspeaker 01D-580.
(6) Remove the screws 01D-080, the washers 01D-090, the spacer 01D-050 and the
clamp 01D-070.
(7) Remove the sleeve 01D-385, the identification sleeves 01D-390 and the splices 01D-
570 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 01D-010.
Page 3006
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-801-B01
Removal of the Wiring Harness
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3007
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-007-A01
A. Removal of the Wiring Harness
(1) Remove the plug connector 02-380 from the power unit 02-370.
(2) Remove the cable terminals 02-490 with the housings 02-500 from the reading light
02-390.
(3) Remove the coupling screws 02-360, the receptacle connector 02-340 and the
backshell assembly 02-350 from the attendant indication panel 02-330.
(5) Remove the cables with the cable terminals 02-130 and the insulations 02-140 from
the loudspeaker 02-310.
(6) Remove the screws 02-080, the washers 02-090, the spacer 02-060 and the clamp 02-
070.
(7) Remove the sleeve 02-420, the identification sleeves 02-430, the splices 02-160, the
heat shrinkable tubing 02-170 and the label 02-540 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 02-010.
Subtask:23-73-54-010-007-B01
B. Removal of the Wiring Harness
Page 3008
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Remove the plug connector 02-380 from the power unit 02-370.
(2) Remove the cable terminals 02-490 with the housings 02-500 from the reading light
02-400.
(3) Remove the coupling screws 02-360, the receptacle connector 02-340 and the
backshell assembly 02-350 from the attendant indication panel 02-330.
(5) Remove the cables with the cable terminals 02-130 and the insulations 02-140 from
the loudspeaker 02-310.
(6) Remove the screws 02-080, the washers 02-090, the spacer 02-060 and the clamp 02-
070.
(7) Remove the sleeve 02-420, the identification sleeves 02-430, the splices 02-160, the
heat shrinkable tubing 02-170 and the label 02-540 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 02-010.
Subtask:23-73-54-010-007-C01
C. Removal of the Wiring Harness
(1) Remove the plug connector 02-380 from the power unit 02-370.
(2) Remove the cable terminals 02-490 with the housings 02-500 from the reading light
02-390.
(3) Remove the coupling screws 02-360, the receptacle connector 02-340 and the
backshell assembly 02-350 from the attendant indication panel 02-330.
(5) Remove the cables with the cable terminals 02-130 and the insulations 02-140 from
the loudspeaker 02-320.
(6) Remove the screws 02-080, the washers 02-090, the spacer 02-060 and the clamp 02-
070.
Page 3009
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(7) Remove the sleeve 02-420, the identification sleeves 02-430, the splices 02-160, the
heat shrinkable tubing 02-170 and the label 02-540 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 02-010.
Subtask:23-73-54-010-007-D01
D. Removal of the Wiring Harness
(1) Remove the plug connector 02-380 from the power unit 02-370.
(2) Remove the cable terminals 02-490 with the housings 02-500 from the reading light
02-400.
(3) Remove the coupling screws 02-360, the receptacle connector 02-340 and the
backshell assembly 02-350 from the attendant indication panel 02-330.
(5) Remove the cables with the cable terminals 02-130 and the insulations 02-140 from
the loudspeaker 02-320.
(6) Remove the screws 02-080, the washers 02-090, the spacer 02-060 and the clamp 02-
070.
(7) Remove the sleeve 02-420, the identification sleeves 02-430, the splices 02-160, the
heat shrinkable tubing 02-170 and the label 02-540 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 02-010.
Subtask:23-73-54-010-007-E01
E. Removal of the Wiring Harness
Page 3010
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Remove the plug connector 02A-380 from the power unit 02A-370.
(2) Remove the cables with the cable terminals 02A-550 and the insulations 02A-560 from
the loudspeaker 02A-320.
(3) Remove the coupling screws 02A-360, the receptacle connector 02A-340 and the
backshell assembly 02A-350 from the attendant indication panel 02A-330.
(5) Remove the screws 02A-260, the washers 02A-270, the nuts 02A-280 and the clamps
02A-070, 02A-075.
(6) Remove the sleeve 02A-420, the identification sleeves 02A-430, the splices 02A-160,
the heat shrinkable tubings 02A-170, 02A-175 and the label 02A-540 from the cables.
Page 3011
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-801-C01
Removal of the Wiring Harness
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3012
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-015-A01
A. Removal of the Wiring Harness
(1) Remove the plug connector 03-480 from the power unit 03-310.
(2) Remove the cable terminals 03-420 with the housings 03-430 from the reading light
03-320.
(3) Remove the coupling screws 03-300, the receptacle connector 03-280 and the
backshell assembly 03-290 from the attendant indication panel 03-270.
(5) Remove the cables with the cable terminals 03-130 and the insulations 03-140 from
the loudspeaker 03-260.
(6) Remove the screws 03-080, the washers 03-090, the spacer 03-060 and the clamp 03-
070.
(7) Remove the sleeve 03-350, the identification sleeves 03-360, the splices 03-160, the
heat shrinkable tubing 03-170 and the label 03-470 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 03-010.
Subtask:23-73-54-010-015-B01
B. Removal of the Wiring Harness
Page 3013
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Remove the plug connector 03-480 from the power unit 03-310.
(2) Remove the cable terminals 03-420 with the housings 03-430 from the reading light
03-330.
(3) Remove the coupling screws 03-300, the receptacle connector 03-280 and the
backshell assembly 03-290 from the attendant indication panel 03-270.
(5) Remove the cables with the cable terminals 03-130 and the insulations 03-140 from
the loudspeaker 03-260.
(6) Remove the screws 03-080, the washers 03-090, the spacer 03-060 and the clamp 03-
070.
(7) Remove the sleeve 03-350, the identification sleeves 03-360, the splices 03-160, the
heat shrinkable tubing 03-170 and the label 03-470 from the cables.
(8) Remove the wiring harness from the attendant info panel assembly 03-010.
Subtask:23-73-54-010-015-C01
C. Removal of the Wiring Harness
(1) Remove the plug connector 03-480 from the power unit 03-310.
(2) Remove the cables with the cable terminals 03-130 and the insulations 03-140 from
the loudspeaker 03-260.
(4) Remove the coupling screws 03-300, the receptacle connector 03-280 and the
backshell assembly 03-290 from the attendant indication panel 03-270.
(5) Remove the screws 03-080, the washers 03-090, the spacer 03-060 and the clamp 03-
070.
Page 3014
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(6) Remove the sleeve 03-350, the identification sleeves 03-360, the splices 03-160, the
heat shrinkable tubing 03-170 and the label 03-470 from the cables.
(7) Remove the wiring harness from the attendant info panel assembly 03-010.
Page 3015
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-801-D01
Removal of the Wiring Harness
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3016
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-016-A01
A. Removal of the Wiring Harness
(1) Remove the plug connector 04-210 from the power unit 04-200.
(2) Remove the cables with the cable terminals 04-420 and the insulations 04-430 from
the loudspeaker 04-110.
(3) Remove the coupling screws 04-140, the receptacle connector 04-120 and the
backshell assembly 04-130 from the attendant indication panel 04-170.
(5) Remove the screws 04-030, the washers 04-040, the nut 04-050, the bracket 04-060
and the mount cable 04-070.
(6) Remove the sleeve 04-300, the identification sleeves 04-310, the splices 04-230, the
heat shrinkable tubings 04-280, 04-290 and the label 04-270 from the cables.
(7) Remove the wiring harness from the panel assembly 04-010.
Page 3017
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-801-E01
Removal of the Wiring Harness
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3018
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-017-A01
A. Removal of the Wiring Harness
(1) Remove the plug connector 05-200 from the power unit 05-190.
(2) Remove the cables with the cable terminals 05-420 and the insulations 05-430 from
the loudspeaker 05-110.
(3) Remove the coupling screws 05-140, the receptacle connector 05-120 and the
backshell assembly 05-130 from the attendant indication panel 05-170.
(5) Remove the screws 05-030, the washers 05-040, the nuts 05-050 and the clamps 05-
060, 05-070.
(6) Remove the sleeve 05-300, the identification sleeves 05-310, the splices 05-230, the
heat shrinkable tubings 05-280, 05-290 and the label 05-270 from the cables.
(7) Remove the wiring harness from the panel assembly 05-010.
Page 3019
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-802-A01
Removal of the Power Unit and the Reading Light
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
NOTE : See CMMV 33-20-10_C9072 or CMMV 33-22-25_D8095 for the DISASSEMBLY of the
power unit.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
CMMV 33-20-10_C9072
CMMV 33-22-25_D8095
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
Referenced Information
Page 3020
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-010-002-A01
A. Removal of the Power Unit and the Reading Light
(1) Remove the screws 01-030, the washers 01-040, the spacers 01-120, the clip nuts 01-
060 and the power unit 01-350.
(2) Remove the locking clamp from the reading light 01-370.
(3) Remove the reading light 01-370 from the attendant info panel assembly 01-010.
Subtask:23-73-54-010-002-C01
B. Removal of the Reading Light
Page 3021
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Remove the locking clamp from the reading light 01A-370.
(2) Remove the reading light 01A-370 from the panel 01A-010.
Subtask:23-73-54-010-002-D01
C. Removal of the Power Unit and the Reading Light
(1) Remove the screws 01B-030, the washers 01B-040, the clip nuts 01B-060 and the
power unit 01B-520.
(2) Remove the locking clamp from the reading light 01B-370.
(3) Remove the reading light 01B-370 from the attendant info panel assembly 01B-010.
Subtask:23-73-54-010-002-E01
D. Removal of the Power Unit and the Reading Light
(1) Remove the screws 01C-030, the washers 01C-040, the spacers 01C-120, the clip
nuts 01C-060 and the power unit 01C-520.
(2) Remove the locking clamp from the reading light 01C-370.
(3) Remove the reading light 01C-370 from the attendant info panel assembly 01C-010.
Subtask:23-73-54-010-002-F01
E. Removal of the Power Unit and the Reading Light
Page 3022
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Remove the screws 01C-030, the washers 01C-040, the spacers 01C-120, the clip
nuts 01C-060 and the power unit 01C-520.
(2) Remove the locking clamp from the reading light 01C-560.
(3) Remove the reading light 01C-560 from the attendant info panel assembly 01C-010.
Subtask:23-73-54-010-002-G01
F. Removal of the Power Unit and the Reading Light
(1) Remove the screws 01D-030, the washers 01D-040, the spacers 01D-120, the clip
nuts 01D-060 and the power unit 01D-520.
(2) Remove the locking clamp from the reading light 01D-370.
(3) Remove the reading light 01D-370 from the attendant info panel assembly 01D-010.
Page 3023
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-802-B01
Removal of the Power Unit and the Reading Light
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
NOTE : See CMMV 33-20-10_C9072 or CMMV 33-22-25_D8095 for the DISASSEMBLY of the
power unit.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-300-803-A01 Replacement of the Power Unit
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
CMMV 33-20-10_C9072
CMMV 33-22-25_D8095
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
Referenced Information
Page 3024
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-010-006-A01
A. Removal of the Power Unit and the Reading Light
(1) Remove the screws 02-030, the washers 02-040, the spacers 02-120, the clip nuts 02-
050 and the power unit 02-370.
(2) Remove the locking clamp from the reading light 02-390.
(3) Remove the reading light 02-390 from the attendant info panel assembly 02-010.
Page 3025
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-006-B01
B. Removal of the Power Unit and the Reading Light
(1) Remove the screws 02-030, the washers 02-040, the spacers 02-120, the clip nuts 02-
050 and the power unit 02-370.
(2) Remove the locking clamp from the reading light 02-400.
(3) Remove the reading light 02-400 from the attendant info panel assembly 02-010.
Subtask:23-73-54-010-006-C01
C. Removal of the Power Unit and the Reading Light
NOTE : See REPAIR TASK 23-73-54-300-803-A01 for removal of the power unit 02A-370.
(1) Remove the locking clamp from the reading light 02A-410.
(2) Remove the reading light 02A-410 from the panel 02A-010.
Page 3026
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-802-C01
Removal of the Power Unit and the Reading Light
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
NOTE : See CMMV 33-20-10_C9072 or CMMV 33-22-25_D8095 for the DISASSEMBLY of the
power unit.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
CMMV 33-20-10_C9072
CMMV 33-22-25_D8095
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
Referenced Information
Page 3027
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-010-012-A01
A. Removal of the Power Unit and the Reading Light
(1) Remove the screws 03-030, the washers 03-040, the spacers 03-120, the clip nuts 03-
050 and the power unit 03-310.
(2) Remove the locking clamp from the reading light 03-320.
(3) Remove the reading light 03-320 from the attendant info panel assembly 03-010.
Page 3028
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-012-B01
B. Removal of the Power Unit and the Reading Light
(1) Remove the screws 03-030, the washers 03-040, the spacers 03-120, the clip nuts 03-
050 and the power unit 03-310.
(2) Remove the locking clamp from the reading light 03-330.
(3) Remove the reading light 03-330 from the attendant info panel assembly 03-010.
Subtask:23-73-54-010-012-C01
C. Removal of the Power Unit and the Reading Light
(1) Remove the screws 03-030, the washers 03-040, the spacers 03-120, the clip nuts 03-
050 and the power unit 03-310.
(2) Remove the locking clamp from the reading light 03-340.
(3) Remove the reading light 03-340 from the attendant info panel assembly 03-010.
Page 3029
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-802-D01
Removal of the Power Unit and the Reading Light
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
NOTE : See CMMV 33-20-10_C9072 or CMMV 33-22-25_D8095 for the DISASSEMBLY of the
power unit.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-300-803-A01 Replacement of the Power Unit
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
CMMV 33-20-10_C9072
CMMV 33-22-25_D8095
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
Referenced Information
3. Procedure
Page 3030
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-010-013-A01
A. Removal of the Power Unit and the Reading Light
NOTE : See REPAIR TASK 23-73-54-300-803-A01 for removal of the power unit 04-200.
(1) Remove the locking clamp from the reading light 04-220.
(2) Remove the reading light 04-220 from the panel 04-010.
Page 3031
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-802-E01
Removal of the Power Unit and the Reading Light
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
NOTE : See CMMV 33-20-10_C9072 or CMMV 33-22-25_D8095 for the DISASSEMBLY of the
power unit.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-300-803-A01 Replacement of the Power Unit
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
CMMV 33-20-10_C9072
CMMV 33-22-25_D8095
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
Referenced Information
3. Procedure
Page 3032
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-010-014-A01
A. Removal of the Power Unit and the Reading Light
NOTE : See REPAIR TASK 23-73-54-300-803-A01 for removal of the power unit 05-190.
(1) Remove the locking clamp from the reading light 05-210.
(2) Remove the reading light 05-210 from the panel 05-010.
Subtask:23-73-54-010-014-B01
B. Removal of the Power Unit and the Reading Light
NOTE : See REPAIR TASK 23-73-54-300-803-A01 for removal of the power unit 05-190.
(1) Remove the locking clamp from the reading light 05-220.
(2) Remove the reading light 05-220 from the panel 05-010.
Page 3033
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-803-A01
Removal of the Loudspeaker
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
- See DISASSEMBLY TASK 23-73-54-010-801-A01 for removal of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-010-801-A01 Removal of the Wiring Harness
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3034
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-003-A01
A. Removal of the Loudspeaker
(1) Remove the screws 01-110, the washers 01-090 and the loudspeaker 01-300.
Subtask:23-73-54-010-003-B01
B. Removal of the Loudspeaker
(1) Remove the screws 01A-110, the washers 01A-097, the lock washers 01A-290 and
the loudspeaker 01A-300.
Subtask:23-73-54-010-003-C01
C. Removal of the Loudspeaker
(1) Remove the screws 01B-110, the washers 01B-090 and the loudspeaker 01B-580.
Subtask:23-73-54-010-003-D01
D. Removal of the Loudspeaker
(1) Remove the screws 01C-110, the washers 01C-090 and the loudspeaker 01C-540.
Page 3035
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-003-E01
E. Removal of the Loudspeaker
(1) Remove the screws 01C-110, the washers 01C-090 and the loudspeaker 01C-580.
Subtask:23-73-54-010-003-F01
F. Removal of the Loudspeaker
(1) Remove the screws 01D-110, the washers 01D-090 and the loudspeaker 01D-580.
Page 3036
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-803-B01
Removal of the Loudspeaker
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
- See DISASSEMBLY TASK 23-73-54-010-801-B01 for removal of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-010-801-B01 Removal of the Wiring Harness
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3037
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-005-A01
A. Removal of the Loudspeaker
(1) Remove the screws 02-110, the washers 02-090 and the loudspeaker 02-310.
Subtask:23-73-54-010-005-B01
B. Removal of the Loudspeaker
(1) Remove the screws 02-110, the washers 02-090 and the loudspeaker 02-320.
Subtask:23-73-54-010-005-C01
C. Removal of the Loudspeaker
(1) Remove the screws 02A-110, the washers 02A-097, the lock washers 02A-290 and
the loudspeaker 02A-320.
Page 3038
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-803-C01
Removal of the Loudspeaker
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
- See DISASSEMBLY TASK 23-73-54-010-801-C01 for removal of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-010-801-C01 Removal of the Wiring Harness
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3039
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-008-A01
A. Removal of the Loudspeaker
(1) Remove the screws 03-110, the washers 03-090 and the loudspeaker 03-260.
Page 3040
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-803-D01
Removal of the Loudspeaker
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
- See DISASSEMBLY TASK 23-73-54-010-801-D01 for removal of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-010-801-D01 Removal of the Wiring Harness
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3041
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-010-A01
A. Removal of the Loudspeaker
(1) Remove the screws 04-080, the washers 04-090, the lock washers 04-100 and the
loudspeaker 04-110.
Page 3042
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-803-E01
Removal of the Loudspeaker
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanently attached parts.
- See DISASSEMBLY TASK 23-73-54-010-801-E01 for removal of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-010-801-E01 Removal of the Wiring Harness
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3043
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-011-A01
A. Removal of the Loudspeaker
(1) Remove the screws 05-080, the washers 05-090, the lock washers 05-100 and the
loudspeaker 05-110.
Page 3044
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-804-A01
Removal of the Attendant Indication Panel
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanent attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3045
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-004-A01
A. Removal of the Attendant Indication Panel
(1) Remove the screws 01-080, the washers 01-090, the nuts 01-100 and the attendant
indication panel 01-310.
Subtask:23-73-54-010-004-B01
B. Removal of the Attendant Indication Panel
(1) Remove the screws 01A-085, the washers 01A-095 and the attendant indication panel
01A-310.
Subtask:23-73-54-010-004-C01
C. Removal of the Attendant Indication Panel
(1) Remove the screws 01B-080, the washers 01B-090, the nuts 01B-100 and the
attendant indication panel 01B-550.
Page 3046
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-004-D01
D. Removal of the Attendant Indication Panel
(1) Remove the screws 01C-080, the washers 01C-090, the nuts 01C-100 and the
attendant indication panel 01C-550.
Subtask:23-73-54-010-004-E01
E. Removal of the Attendant Indication Panel
(1) Remove the screws 01D-080, the washers 01D-090, the nuts 01D-100 and the
attendant indication panel 01D-550.
Page 3047
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-804-B01
Removal of the Attendant Indication Panel
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanent attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3048
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-018-A01
A. Removal of the Attendant Indication Panel
(1) Remove the screws 02-080, the washers 02-090, the nuts 02-100 and the attendant
indication panel 02-330.
Subtask:23-73-54-010-018-B01
B. Removal of the Attendant Indication Panel
(1) Remove the screws 02A-085, the washers 02A-095 and the attendant indication panel
02A-330.
Page 3049
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-804-C01
Removal of the Attendant Indication Panel
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanent attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3050
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-019-A01
A. Removal of the Attendant Indication Panel
(1) Remove the screws 03-080, the washers 03-090, the nuts 03-100 and the attendant
indication panel 03-270.
Page 3051
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-804-D01
Removal of the Attendant Indication Panel
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanent attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3052
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-020-A01
A. Removal of the Attendant Indication Panel
(1) Remove the screws 04-150, the washers 04-160 and the attendant indication panel
04-170.
Page 3053
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-010-804-E01
Removal of the Attendant Indication Panel
1. General
- See TESTING AND FAULT ISOLATION TASK 23-73-54-700-801-A01 and TASK 23-73-54-
700-802-A01 for the necessary level of the disassembly.
- Use applicable removal tools for the removal of the connecting clamps and the locking clips.
- See REPAIR TASK 23-73-54-300-801-A01 and TASK 23-73-54-300-802-A01 for the
replacement of the permanent attached parts.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 3054
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-010-021-A01
A. Removal of the Attendant Indication Panel
(1) Remove the screws 05-150, the washers 05-160 and the attendant indication panel
05-170.
Page 3055
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
CLEANING
TASK 23-73-54-100-801-A01
Cleaning
1. General
- See CMMV 33-20-10_C9072 for the CLEANING of the power unit.
- See CMMV 33-22-04_D8095 or CMMV 33-22-06_D8095 or CMMV 33-22-35_D8095 for the
CLEANING of the reading lights.
- See CMMV 23-73-22_C9072 for the CLEANING of the attendant indication panel.
A. Consumable Materials
REFERENCE DESIGNATION
14SBA1 Textile-Lint free Cotton -
08BBD1 Non Aqueous Cleaner-- Isopropyl Alcohol -
Consumable Materials
B. Referenced Information
REFERENCE DESIGNATION
CMMV 33-20-10_C9072
Page 4001
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
REFERENCE DESIGNATION
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 23-73-22_C9072
Referenced Information
3. Procedure
Subtask:23-73-54-100-001-A01
A. Cleaning of the Component Parts
NOTE : See CMMV 33-20-10_C9072 for the CLEANING of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the CLEANING of the attendant indication panel.
(1) Wipe dirt and dust from cables, terminals and connector plugs with a dry Material No.
14SBA1 Textile-Lint free Cotton -.
(a) Remove dirt and dust from the surface with Material No. 14SBA1 Textile-Lint free
Cotton - made moist with Material No. 08BBD1 Non Aqueous Cleaner-- Isopropyl
Alcohol -.
Page 4002
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(b) Dry the surface with a clean, dry, Material No. 14SBA1 Textile-Lint free Cotton -.
Page 4003
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
INSPECTION/CHECK
TASK 23-73-54-210-801-A01
Check of the PSIU
1. General
This is a visual inspection of the component parts.
NOTE : See CMMV 33-20-10_C9072 for the CHECK of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the CHECK of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
CMMV 33-20-10_C9072
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
Page 5001
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
REFERENCE DESIGNATION
CMMV 23-73-22_C9072
Referenced Information
3. Procedure
Subtask:23-73-54-220-001-A01
A. Check of the PSIU
Page 5002
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
REPAIR
TASK 23-73-54-300-801-A01
Repair of the Cable Bundle
1. General
- See CMMV 33-20-10_C9072 for the REPAIR of the power unit.
- See CMMV 33-22-04_D8095 or CMMV 33-22-06_D8095 or CMMV 33-22-35_D8095 for the
REPAIR of the reading light.
- See CMMV 23-73-22_C9072 for the REPAIR of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
CMMV 33-20-10_C9072
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 23-73-22_C9072
Referenced Information
Page 6001
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
Subtask:23-73-54-300-001-A01
A. Repair of the Cable Bundle
NOTE : The Electrical Standard Practices Manual (ESPM) gives data about standard
repair processes.
(3) Cut up a new piece of cable with a length as measured in step (2).
(5) Crimp-on the cable terminals and/or pins to both sides of the cable with a standard
tool.
NOTE : Use the same type of pins/terminals as you have found on the damaged
cable.
(6) Pin-in all cables into the main connector plug and into the power unit plug, if removed.
Page 6002
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-300-802-A01
Removal of Nicks, Cracks, Dents and Heat Damage
1. General
- See CMMV 33-20-10_C9072 for the REPAIR of the power unit.
- See CMMV 33-22-04_D8095 or CMMV 33-22-06_D8095 or CMMV 33-22-35_D8095 for the
REPAIR of the reading light.
- See CMMV 23-73-22_C9072 for the REPAIR of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
CMMV 33-20-10_C9072
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 23-73-22_C9072
Referenced Information
Page 6003
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
Subtask:23-73-54-300-003-A01
A. Removal of Nicks, Cracks, Dents and Heat Damage
(1) Use the standard repair procedures to repair small damage or deformation of the
component parts.
Page 6004
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-300-803-A01
Replacement of the Power Unit
1. General
- See CMMV 33-20-10_C9072 for the REPAIR of the power unit.
- See CMMV 33-22-04_D8095 or CMMV 33-22-06_D8095 or CMMV 33-22-35_D8095 for the
REPAIR of the reading light.
- See CMMV 23-73-22_C9072 for the REPAIR of the attendant indication panel.
- See the Electrical Standard Practices Manual (ESPM) for more data about standard repair
processes.
A. Referenced Information
REFERENCE DESIGNATION
CMMV 33-20-10_C9072
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 23-73-22_C9072
Referenced Information
Page 6005
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-300-004-A01
A. Replacement of the Power Unit
(1) Remove the two plastic rivets 02A-300 which attach the power unit 02A-370 to the
panel 02A-010.
NOTE : Use a standard riveting procedure to replace the plastic rivets 02A-300.
(3) Remove the power unit 02A-370 from the panel 02A-010.
(4) Put a new power unit 02A-370 in position to the panel 02A-010.
(5) Fasten the power unit 02A-370 to the panel 02A-010 with new plastic rivets 02A-300.
Page 6006
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-300-004-B01
B. Replacement of the Power Unit
(1) Remove the plastic rivets 04-180 and the retainers 04-190 which attach the power unit
04-200 to the panel 04-010.
NOTE : Use a standard riveting procedure to replace the plastic rivets 04-180.
(3) Remove the power unit 04-200 from the panel 04-010.
(4) Put a new power unit 04-200 in position to the panel 04-010.
(5) Fasten the power unit 04-200 to the panel 04-010 with new plastic rivets 04-180 and
new retainers 04-190.
Subtask:23-73-54-300-004-C01
C. Replacement of the Power Unit
(1) Remove the two plastic rivets 05-180 which attach the power unit 05-190 to the panel
05-010.
NOTE : Use a standard riveting procedure to replace the plastic rivets 05-180.
(3) Remove the power unit 05-190 from the panel 05-010.
(4) Put a new power unit 05-190 in position to the panel 05-010.
(5) Fasten the power unit 05-190 to the panel 05-010 with new plastic rivets 05-180.
Page 6007
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-300-004-D01
D. Replacement of the Power Unit
Page 6008
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-300-804-A01
Replacement of the Identification Plates
1. General
- See CMMV 33-20-10_C9072 for the REPAIR of the power unit.
- See CMMV 33-22-04_D8095 or CMMV 33-22-06_D8095 or CMMV 33-22-35_D8095 for the
REPAIR of the reading light.
- See CMMV 23-73-22_C9072 for the REPAIR of the attendant indication panel.
A. Consumable Materials
REFERENCE DESIGNATION
14SBA1 Textile-Lint free Cotton -
08BBF1 Non Aqueous Cleaner-- Methyl-Ethyl-Ketone -
Consumable Materials
Page 6009
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
C. Referenced Information
REFERENCE DESIGNATION
CMMV 33-20-10_C9072
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 23-73-22_C9072
PMS 01-07-05
Referenced Information
3. Procedure
CAUTION : USE ONLY THE SPECIFIED CLEANING AGENTS. CLEANING AGENTS WHICH
ARE NOT SPECIFIED CAN CAUSE DAMAGE.
CAUTION : MAKE SURE THAT ALL THE COMPONENTS ARE CLEAN BEFORE YOU
ASSEMBLE THEM.
Subtask:23-73-54-300-005-A01
A. Replacement of the Identification Plate
(1) Make a copy of the data from the old caution placard 01B-470, the old identification
plate 01B-480 and the old identification placard 01B-490, see PMS 01-07-05.
(2) Write the data on the new caution placard 01B-470, the new identification plate 01B-
480 and the new identification placard 01B-490.
Page 6010
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(3) Remove the damaged or loose caution placard 01B-470, identification plate 01B-480,
identification placard 01B-490 with a non - metallic scraper.
NOTE : You can use a hot air blower to make the adhesive soft for an easy removal.
(4) Clean the bonding area with Material No. 14SBA1 Textile-Lint free Cotton - and
Material No. 08BBF1 Non Aqueous Cleaner-- Methyl-Ethyl-Ketone -.
(5) Remove the protection foil from the new caution placard 01B-470, the new
identification plate 01B-480 and the new identification placard 01B-490.
(6) Align and attach the new caution placard 01B-470, the new identification plate 01B-480
and the new identification placard 01B-490 on the dry and clean bonding area.
Subtask:23-73-54-300-005-B01
B. Replacement of the Identification Plate
(1) Make a copy of the data from the old caution placard 01C-470, the old identification
plate 01C-480 and the old identification placard 01C-490, see PMS 01-07-05.
(2) Write the data on the new caution placard 01C-470, the new identification plate 01C-
480 and the new identification placard 01C-490.
(3) Remove the damaged or loose caution placard 01C-470, identification plate 01C-480,
identification placard 01C-490 with a non - metallic scraper.
NOTE : You can use a hot air blower to make the adhesive soft for an easy removal.
(4) Clean the bonding area with Material No. 14SBA1 Textile-Lint free Cotton - and
Material No. 08BBF1 Non Aqueous Cleaner-- Methyl-Ethyl-Ketone -.
(5) Remove the protection foil from the new caution placard 01C-470, the new
identification plate 01C-480 and the new identification placard 01C-490.
(6) Align and attach the new caution placard 01C-470, the new identification plate 01C-
480 and the new identification placard 01C-490 on the dry and clean bonding area.
Page 6011
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-300-005-C01
C. Replacement of the Identification Plate
(1) Make a copy of the data from the old caution placard 01D-470, the old identification
plate 01D-480 and the old identification placard 01D-490, see PMS 01-07-05.
(2) Write the data on the new caution placard 01D-470, the new identification plate 01D-
480 and the new identification placard 01D-490.
(3) Remove the damaged or loose caution placard 01D-470, identification plate 01D-480,
identification placard 01D-490 with a non - metallic scraper.
NOTE : You can use a hot air blower to make the adhesive soft for an easy removal.
(4) Clean the bonding area with Material No. 14SBA1 Textile-Lint free Cotton - and
Material No. 08BBF1 Non Aqueous Cleaner-- Methyl-Ethyl-Ketone -.
(5) Remove the protection foil from the new caution placard 01D-470, the new
identification plate 01D-480 and the new identification placard 01D-490.
(6) Align and attach the new caution placard 01D-470, the new identification plate 01D-
480 and the new identification placard 01D-490 on the dry and clean bonding area.
Subtask:23-73-54-300-005-D01
D. Replacement of the Identification Plate
(1) Make a copy of the data from the old caution placard 02-510, the old identification
plate 02-520 and the old identification placard 02-530, see PMS 01-07-05.
(2) Write the data on the new caution placard 02-510, the new identification plate 02-520
and the new identification placard 02-530.
Page 6012
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(3) Remove the damaged or loose caution placard 02-510, identification plate 02-520,
identification placard 02-530 with a non - metallic scraper.
NOTE : You can use a hot air blower to make the adhesive soft for an easy removal.
(4) Clean the bonding area with Material No. 14SBA1 Textile-Lint free Cotton - and
Material No. 08BBF1 Non Aqueous Cleaner-- Methyl-Ethyl-Ketone -.
(5) Remove the protection foil from the new caution placard 02-510, the new identification
plate 02-520 and the new identification placard 02-530.
(6) Align and attach the new caution placard 02-510, the new identification plate 02-520
and the new identification placard 02-530 on the dry and clean bonding area.
Subtask:23-73-54-300-005-E01
E. Replacement of the Identification Plate
(1) Make a copy of the data from the old caution placard 02A-510, the old identification
plate 02A-520 and the old identification placard 02A-530, see PMS 01-07-05.
(2) Write the data on the new caution placard 02A-510, the new identification plate 02A-
520 and the new identification placard 02A-530.
(3) Remove the damaged or loose caution placard 02A-510, identification plate 02A-520,
identification placard 02A-530 with a non - metallic scraper.
NOTE : You can use a hot air blower to make the adhesive soft for an easy removal.
(4) Clean the bonding area with Material No. 14SBA1 Textile-Lint free Cotton - and
Material No. 08BBF1 Non Aqueous Cleaner-- Methyl-Ethyl-Ketone -.
(5) Remove the protection foil from the new caution placard 02A-510, the new
identification plate 02A-520 and the new identification placard 02A-530.
(6) Align and attach the new caution placard 02A-510, the new identification plate 02A-520
and the new identification placard 02A-530 on the dry and clean bonding area.
Page 6013
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-300-005-F01
F. Replacement of the Identification Plate
(1) Make a copy of the data from the old caution placard 03-440, the old identification
plate 03-450 and the old identification placard 03-460, see PMS 01-07-05.
(2) Write the data on the new caution placard 03-440, the new identification plate 03-450
and the new identification placard 03-460.
(3) Remove the damaged or loose caution placard 03-440, identification plate 03-450,
identification placard 03-460 with a non - metallic scraper.
NOTE : You can use a hot air blower to make the adhesive soft for an easy removal.
(4) Clean the bonding area with Material No. 14SBA1 Textile-Lint free Cotton - and
Material No. 08BBF1 Non Aqueous Cleaner-- Methyl-Ethyl-Ketone -.
(5) Remove the protection foil from the new caution placard 03-440, the new identification
plate 03-450 and the new identification placard 03-460.
(6) Align and attach the new caution placard 03-440, the new identification plate 03-450
and the new identification placard 03-460 on the dry and clean bonding area.
Subtask:23-73-54-300-005-G01
G. Replacement of the Identification Plate
(1) Make a copy of the data from the old caution placard 04-240, the old identification
plate 04-250 and the old identification placard 04-260, see PMS 01-07-05.
(2) Write the data on the new caution placard 04-240, the new identification plate 04-250
and the new identification placard 04-260.
(3) Remove the damaged or loose caution placard 04-240, identification plate 04-250,
identification placard 04-260 with a non - metallic scraper.
NOTE : You can use a hot air blower to make the adhesive soft for an easy removal.
Page 6014
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(4) Clean the bonding area with Material No. 14SBA1 Textile-Lint free Cotton - and
Material No. 08BBF1 Non Aqueous Cleaner-- Methyl-Ethyl-Ketone -.
(5) Remove the protection foil from the new caution placard 04-240, the new identification
plate 04-250 and the new identification placard 04-260.
(6) Align and attach the new caution placard 04-240, the new identification plate 04-250
and the new identification placard 04-260 on the dry and clean bonding area.
Subtask:23-73-54-300-005-H01
H. Replacement of the Identification Plate
(1) Make a copy of the data from the old caution placard 05-240, the old identification
plate 05-250 and the old identification placard 05-260, see PMS 01-07-05.
(2) Write the data on the new caution placard 05-240, the new identification plate 05-250
and the new identification placard 05-260.
(3) Remove the damaged or loose caution placard 05-240, identification plate 05-250,
identification placard 05-260 with a non - metallic scraper.
NOTE : You can use a hot air blower to make the adhesive soft for an easy removal.
(4) Clean the bonding area with Material No. 14SBA1 Textile-Lint free Cotton - and
Material No. 08BBF1 Non Aqueous Cleaner-- Methyl-Ethyl-Ketone -.
(5) Remove the protection foil from the new caution placard 05-240, the new identification
plate 05-250 and the new identification placard 05-260.
(6) Align and attach the new caution placard 05-240, the new identification plate 05-250
and the new identification placard 05-260 on the dry and clean bonding area.
Subtask:23-73-54-300-005-J01
J. Replacement of the Identification Plate
Page 6015
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
ASSEMBLY
TASK 23-73-54-410-801-A01
Installation of the Attendant Indication Panel
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7001
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-001-A01
A. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 01-310 with the screws 01-080, the washers 01-
090 and the nuts 01-100.
Subtask:23-73-54-410-001-B01
B. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 01A-310 with the screws 01A-085 and the
washers 01A-095.
Page 7002
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-410-001-C01
C. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 01B-550 with the screws 01B-080, the washers
01B-090 and the nuts 01B-100.
Subtask:23-73-54-410-001-D01
D. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 01C-550 with the screws 01C-080, the washers
01C-090 and the nuts 01C-100.
Subtask:23-73-54-410-001-E01
E. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 01D-550 with the screws 01D-080, the washers
01D-090 and the nuts 01D-100.
Page 7003
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-801-B01
Installation of the Attendant Indication Panel
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7004
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-017-A01
A. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 02-330 with the screws 02-080, the washers 02-
090 and the nuts 02-100.
Subtask:23-73-54-410-017-B01
B. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 02A-330 with the screws 02A-085 and the
washers 02A-095.
Page 7005
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-801-C01
Installation of the Attendant Indication Panel
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7006
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-018-A01
A. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 03-270 with the screws 03-080, the washers 03-
090 and the nuts 03-100.
Page 7007
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-801-D01
Installation of the Attendant Indication Panel
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 7008
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-410-019-A01
A. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 04-170 with the screws 04-150 and the washers
04-160.
Page 7009
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-801-E01
Installation of the Attendant Indication Panel
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 7010
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-410-020-A01
A. Installation of the Attendant Indication Panel
(1) Install the attendant indication panel 05-170 with the screws 05-150 and the washers
05-160.
Page 7011
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-802-A01
Installation of the Loudspeaker
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
NOTE : See ASSEMBLY TASK 23-73-54-410-804-A01 for assembly of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-410-804-A01 Installation of the Wiring Harness
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7012
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-002-A01
A. Installation of the Loudspeaker
(1) Install the loudspeaker 01-300 with the screws 01-110 and the washers 01-090.
Subtask:23-73-54-410-002-B01
B. Installation of the Loudspeaker
(1) Install the loudspeaker 01A-300 with the screws 01A-110, the washers 01A-097 and
the lock washers 01A-290.
Page 7013
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-410-002-C01
C. Installation of the Loudspeaker
(1) Install the loudspeaker 01B-580 with the screws 01B-110 and the washers 01B-090.
Subtask:23-73-54-410-002-D01
D. Installation of the Loudspeaker
(1) Install the loudspeaker 01C-540 with the screws 01C-110 and the washers 01C-090.
Subtask:23-73-54-410-002-E01
E. Installation of the Loudspeaker
(1) Install the loudspeaker 01C-580 with the screws 01C-110 and the washers 01C-090.
Subtask:23-73-54-410-002-F01
F. Installation of the Loudspeaker
(1) Install the loudspeaker 01D-580 with the screws 01D-110 and the washers 01D-090.
Page 7014
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-802-B01
Installation of the Loudspeaker
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
NOTE : See ASSEMBLY TASK 23-73-54-410-804-B01 for assembly of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-410-804-B01 Installation of the Wiring Harness
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7015
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-007-A01
A. Installation of the Loudspeaker
(1) Install the loudspeaker 02-310 with the screws 02-110 and the washers 02-090.
Subtask:23-73-54-410-007-B01
B. Installation of the Loudspeaker
(1) Install the loudspeaker 02-320 with the screws 02-110 and the washers 02-090.
Page 7016
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-410-007-C01
C. Installation of the Loudspeaker
(1) Install the loudspeaker 02A-320 with the screws 02A-110, the washers 02A-097 and
the lock washers 02A-290.
Page 7017
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-802-C01
Installation of the Loudspeaker
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
NOTE : See ASSEMBLY TASK 23-73-54-410-804-C01 for assembly of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-410-804-C01 Installation of the Wiring Harness
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7018
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-014-A01
A. Installation of the Loudspeaker
(1) Install the loudspeaker 03-260 with the screws 03-110 and the washers 03-090.
Page 7019
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-802-D01
Installation of the Loudspeaker
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
NOTE : See ASSEMBLY TASK 23-73-54-410-804-D01 for assembly of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-410-804-D01 Installation of the Wiring Harness
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7020
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-015-A01
A. Installation of the Loudspeaker
(1) Install the loudspeaker 04-110 with the screws 04-080, the washers 04-090 and the
lock washers 04-100.
Page 7021
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-802-E01
Installation of the Loudspeaker
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
NOTE : See ASSEMBLY TASK 23-73-54-410-804-E01 for assembly of the wiring harness.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-410-804-E01 Installation of the Wiring Harness
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7022
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-016-A01
A. Installation of the Loudspeaker
(1) Install the loudspeaker 05-110 with the screws 05-080, the washers 05-090 and the
lock washers 05-100.
Page 7023
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-803-A01
Installation of the Power Unit and the Reading Light
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7024
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-003-A01
A. Installation of the Power Unit and the Reading Light
(1) Install the reading light 01-370 with the locking clamp on the attendant info panel
assembly 01-010.
(2) Install the power unit 01-350 with the screws 01-030, the washers 01-040, the spacers
01-120 and the clip nuts 01-060.
Subtask:23-73-54-410-003-B01
B. Installation of the Reading Light
Page 7025
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Install the reading light 01A-370 with the locking clamp on the attendant info panel
assembly 01A-010.
Subtask:23-73-54-410-003-D01
C. Installation of the Power Unit and the Reading Light
(1) Install the reading light 01B-370 with the locking clamp on the attendant info panel
assembly 01B-010.
(2) Install the power unit 01B-520 with the screws 01B-030, the washers 01B-040 and the
clip nuts 01B-060.
Subtask:23-73-54-410-003-E01
D. Installation of the Power Unit and the Reading Light
(1) Install the reading light 01C-370 with the locking clamp on the attendant info panel
assembly 01C-010.
(2) Install the power unit 01C-520 with the screws 01C-030, the washers 01C-040, the
spacers 01C-120 and the clip nuts 01C-060.
Subtask:23-73-54-410-003-F01
E. Installation of the Power Unit and the Reading Light
Page 7026
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Install the reading light 01C-560 with the locking clamp on the attendant info panel
assembly 01C-010.
(2) Install the power unit 01C-520 with the screws 01C-030, the washers 01C-040, the
spacers 01C-120 and the clip nuts 01C-060.
Subtask:23-73-54-410-003-G01
F. Installation of the Power Unit and the Reading Light
(1) Install the reading light 01D-370 with the locking clamp on the attendant info panel
assembly 01D-010.
(2) Install the power unit 01D-520 with the screws 01D-030, the washers 01D-040, the
spacers 01D-120 and the clip nuts 01D-060.
Page 7027
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-803-B01
Installation of the Power Unit and the Reading Light
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7028
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-006-A01
A. Installation of the Power Unit and the Reading Light
(1) Install the reading light 02-390 with the locking clamp on the attendant info panel
assembly 02-010.
(2) Install the power unit 02-370 with the screws 02-030, the washers 02-040, the spacers
02-120 and the clip nuts 02-050.
Subtask:23-73-54-410-006-B01
B. Installation of the Power Unit and the Reading Light
Page 7029
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Install the reading light 02-400 with the locking clamp on the attendant info panel
assembly 02-010.
(2) Install the power unit 02-370 with the screws 02-030, the washers 02-040, the spacers
02-120 and the clip nuts 02-050.
Subtask:23-73-54-410-006-C01
C. Installation of the Reading Light
(1) Install the reading light 02A-410 with the locking clamp on the panel 02A-010.
Page 7030
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-803-C01
Installation of the Power Unit and the Reading Light
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7031
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-011-A01
A. Installation of the Power Unit and the Reading Light
(1) Install the reading light 03-340 with the locking clamp on the attendant info panel
assembly 03-010.
(2) Install the power unit 03-310 with the screws 03-030, the washers 03-040, the spacers
03-120, the clip nuts 03-050.
Subtask:23-73-54-410-011-B01
B. Installation of the Power Unit and the Reading Light
Page 7032
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Install the reading light 03-330 with the locking clamp on the attendant info panel
assembly 03-010.
(2) Install the power unit 03-310 with the screws 03-030, the washers 03-040, the spacers
03-120, the clip nuts 03-050.
Subtask:23-73-54-410-011-C01
C. Installation of the Power Unit and the Reading Light
(1) Install the reading light 03-320 with the locking clamp on the attendant info panel
assembly 03-010.
(2) Install the power unit 03-310 with the screws 03-030, the washers 03-040, the spacers
03-120, the clip nuts 03-050.
Page 7033
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-803-D01
Installation of the Reading Light
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 7034
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-410-012-A01
A. Installation of the Reading Light
(1) Install the reading light 04-220 with the locking clamp on the panel 04-010.
Page 7035
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-803-E01
Installation of the Reading Light
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Page 7036
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-410-013-A01
A. Installation of the Reading Light
(1) Install the reading light 05-220 with the locking clamp on the panel 05-010.
Subtask:23-73-54-410-013-B01
B. Installation of the Reading Light
(1) Install the reading light 05-210 with the locking clamp on the panel 05-010.
Page 7037
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-804-A01
Installation of the Wiring Harness
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7038
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-004-A01
A. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 01-010.
(4) Install the clamp 01-070 with the screw 01-080, the washer 01-090 and the spacer 01-
050.
(5) Install the cables with the cable terminals 01-130 and the insulations 01-140 to the
loudspeaker 01-300.
Page 7039
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(7) Install the receptacle connector 01-320 and the backshell assembly 01-330 with the
coupling screws 01-340 on the attendant indication panel 01-310.
Subtask:23-73-54-410-004-B01
B. Installation of the Wiring Harness
(3) Put the clamps 01A-070 and 01A-075 over the wiring harness.
(4) Install the clamps 01A-070 and 01A-075 with the screws 01A-260, the washers 01A-
270 and the nuts 01A-280.
(5) Install the cables with the cable terminals 01A-130 and the insulations 01A-140 to the
loudspeaker 01A-300.
(7) Install the receptacle connector 01A-320 and the backshell assembly 01A-330 with the
coupling screws 01A-340 on the attendant indication panel 01A-310.
Subtask:23-73-54-410-004-C01
C. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 01B-010.
(2) Install the sleeve 01B-385 and the identification sleeves 01B-390 on the cables.
Page 7040
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(4) Install the clamp 01B-070 with the screws 01B-080, the washers 01B-090 and the
spacer 01B-050.
(5) Install the cable terminals 01B-130 and the insulations 01B-140 on the loudspeaker
01B-580.
(7) Install the receptacle connector 01B-320, the backshell 01B-330 and the sliding lock
retainer 01B-510 on the attendant indication panel 01B-550.
(8) Install the cable terminals 01B-450 with the housings 01B-460 on the reading light
01B-370.
(9) Install the plug connector 01B-530 on the power unit 01B-520.
Subtask:23-73-54-410-004-D01
D. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 01C-010.
(2) Install the sleeve 01C-385, the identification sleeves 01C-390 and the splices 01C-570
on the cables.
(4) Install the clamp 01C-070 with the screws 01C-080, the washers 01C-090 and the
spacer 01C-050.
(5) Install the cable terminals 01C-130 and the insulations 01C-140 on the loudspeaker
01C-580.
(7) Install the receptacle connector 01C-320 and the backshell assembly 01C-330 with the
coupling screws 01C-340 on the attendant indication panel 01C-550.
Page 7041
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(8) Install the cable terminals 01C-450 with the housings 01C-460 on the reading light
01C-370.
(9) Install the plug connector 01C-530 on the power unit 01C-520.
Subtask:23-73-54-410-004-E01
E. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 01C-010.
(2) Install the sleeve 01C-385, the identification sleeves 01C-390 and the splices 01C-570
on the cables.
(4) Install the clamp 01C-070 with the screws 01C-080, the washers 01C-090 and the
spacer 01C-050.
(5) Install the cable terminals 01C-130 and the insulations 01C-140 on the loudspeaker
01C-540.
(7) Install the receptacle connector 01C-320 and the backshell assembly 01C-330 with the
coupling screws 01C-340 on the attendant indication panel 01C-550.
(8) Install the cable terminals 01C-450 with the housings 01C-460 on the reading light
01C-560.
(9) Install the plug connector 01C-530 on the power unit 01C-520.
Subtask:23-73-54-410-004-F01
F. Installation of the Wiring Harness
Page 7042
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) Put the wiring harness in position on the attendant info panel assembly 01D-010.
(2) Install the sleeve 01D-385, the identification sleeves 01D-390 and the splices 01D-570
on the cables.
(4) Install the clamp 01D-070 with the screws 01D-080, the washers 01D-090 and the
spacer 01D-050.
(5) Install the cable terminals 01D-130 and the insulations 01D-140 on the loudspeaker
01D-580.
(7) Install the receptacle connector 01D-320, the backshell 01D-330 and the sliding lock
retainer 01D-510 on the attendant indication panel 01D-550.
(8) Install the cable terminals 01D-450 with the housings 01D-460 on the reading light
01D-370.
(9) Install the plug connector 01D-530 on the power unit 01D-520.
Subtask:23-73-54-410-004-G01
G. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 01D-010.
(2) Install the sleeve 01D-385, the identification sleeves 01D-390 and the splices 01D-570
on the cables.
(4) Install the clamp 01D-070 with the screws 01D-080, the washers 01D-090 and the
spacer 01D-050.
(5) Install the cable terminals 01D-130 and the insulations 01D-140 on the loudspeaker
01D-580.
Page 7043
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(7) Install the receptacle connector 01D-320 and the backshell 01D-330 on the attendant
indication panel 01D-550.
(8) Install the cable terminals 01D-450 with the housings 01D-460 on the reading light
01D-370.
(9) Install the plug connector 01D-530 on the power unit 01D-520.
Page 7044
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-804-B01
Installation of the Wiring Harness
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7045
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-005-A01
A. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 02-010.
(2) Install the sleeve 02-420, the identification sleeves 02-430, the splices 02-160, the
heat shrinkable tubing 02-170 and the label 02-540 on the cables.
(4) Install the clamp 02-070 with the screws 02-080, the washers 02-090 and the spacer
02-060.
(5) Install the cable terminals 02-130 and the insulations 02-140 on the loudspeaker 02-
320.
Page 7046
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(7) Install the receptacle connector 02-340 and the backshell assembly 02-350 with the
coupling screws 02-360 on the attendant indication panel 02-330.
(8) Install the cable terminals 02-490 with the housings 02-500 on the reading light 02-
400.
(9) Install the plug connector 02-380 on the power unit 02-370.
Subtask:23-73-54-410-005-B01
B. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 02-010.
(2) Install the sleeve 02-420, the identification sleeves 02-430, the splices 02-160, the
heat shrinkable tubing 02-170 and the label 02-540 on the cables.
(4) Install the clamp 02-070 with the screws 02-080, the washers 02-090 and the spacer
02-060.
(5) Install the cable terminals 02-130 and the insulations 02-140 on the loudspeaker 02-
320.
(7) Install the receptacle connector 02-340 and the backshell assembly 02-350 with the
coupling screws 02-360 on the attendant indication panel 02-330.
(8) Install the cable terminals 02-490 with the housings 02-500 on the reading light 02-
390.
(9) Install the plug connector 02-380 on the power unit 02-370.
Page 7047
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-410-005-C01
C. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 02-010.
(2) Install the sleeve 02-420, the identification sleeves 02-430, the splices 02-160, the
heat shrinkable tubing 02-170 and the label 02-540 on the cables.
(4) Install the clamp 02-070 with the screws 02-080, the washers 02-090 and the spacer
02-060.
(5) Install the cable terminals 02-130 and the insulations 02-140 on the loudspeaker 02-
310.
(7) Install the receptacle connector 02-340 and the backshell assembly 02-350 with the
coupling screws 02-360 on the attendant indication panel 02-330.
(8) Install the cable terminals 02-490 with the housings 02-500 on the reading light 02-
400.
(9) Install the plug connector 02-380 on the power unit 02-370.
Subtask:23-73-54-410-005-D01
D. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 02-010.
Page 7048
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(2) Install the sleeve 02-420, the identification sleeves 02-430, the splices 02-160, the
heat shrinkable tubing 02-170 and the label 02-540 on the cables.
(4) Install the clamp 02-070 with the screws 02-080, the washers 02-090 and the spacer
02-060.
(5) Install the cable terminals 02-130 and the insulations 02-140 on the loudspeaker 02-
310.
(7) Install the receptacle connector 02-340 and the backshell assembly 02-350 with the
coupling screws 02-360 on the attendant indication panel 02-330.
(8) Install the cable terminals 02-490 with the housings 02-500 on the reading light 02-
390.
(9) Install the plug connector 02-380 on the power unit 02-370.
Subtask:23-73-54-410-005-E01
E. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 02A-010.
(2) Install the sleeve 02A-420, the identification sleeves 02A-430, the splices 02A-160, the
heat shrinkable tubings 02A-170, 02A-175 and the label 02A-540 on the cables.
(3) Put the clamps 02A-070, 02A-075 over the wiring harness.
(4) Install the clamps 02A-070, 02A-075 with the screws 02A-260, the washers 02A-270
and the nuts 02A-280.
(6) Install the receptacle connector 02A-340 and the backshell assembly 02A-350 with the
coupling screws 02A-360 on the attendant indication panel 02A-330.
Page 7049
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(7) Install the cable terminals 02A-550 and the insulations 02A-560 on the loudspeaker
02A-320.
(8) Install the plug connector 02A-380 on the power unit 02A-370.
Page 7050
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-804-C01
Installation of the Wiring Harness
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
Page 7051
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
3. Procedure
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-008-A01
A. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 03-010.
(2) Install the sleeve 03-350, the identification sleeves 03-360, the splices 03-160, the
heat shrinkable tubing 03-170 and the label 03-470 on the cables.
(4) Install the clamp 03-070 with the screws 03-080, the washers 03-090 and the spacer
03-060.
Page 7052
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(6) Install the receptacle connector 03-280 and the backshell assembly 03-290 with the
coupling screws 03-300 on the attendant indication panel 03-270.
(7) Install the cable terminals 03-130 and the insulations 03-140 on the loudspeaker 03-
260.
(8) Install the plug connector 03-480 on the power unit 03-310.
Subtask:23-73-54-410-008-B01
B. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 03-010.
(2) Install the sleeve 03-350, the identification sleeves 03-360, the splices 03-160, the
heat shrinkable tubing 03-170 and the label 03-470 on the cables.
(4) Install the clamp 03-070 with the screws 03-080, the washers 03-090 and the spacer
03-060.
(5) Install the cable terminals 03-130 and the insulations 03-140 on the loudspeaker 03-
260.
(7) Install the receptacle connector 03-280 and the backshell assembly 03-290 with the
coupling screws 03-300 on the attendant indication panel 03-270.
(8) Install the cable terminals 03-420 with the housings 03-430 on the reading light 03-
330.
(9) Install the plug connector 03-480 on the power unit 03-310.
Page 7053
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Subtask:23-73-54-410-008-C01
C. Installation of the Wiring Harness
(1) Put the wiring harness in position on the attendant info panel assembly 03-010.
(2) Install the sleeve 03-350, the identification sleeves 03-360, the splices 03-160, the
heat shrinkable tubing 03-170 and the label 03-470 on the cables.
(4) Install the clamp 03-070 with the screws 03-080, the washers 03-090 and the spacer
03-060.
(5) Install the cable terminals 03-130 and the insulations 03-140 on the loudspeaker 03-
260.
(7) Install the receptacle connector 03-280 and the backshell assembly 03-290 with the
coupling screws 03-300 on the attendant indication panel 03-270.
(8) Install the cable terminals 03-420 with the housings 03-430 on the reading light 03-
320.
(9) Install the plug connector 03-480 on the power unit 03-310.
Page 7054
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-804-D01
Installation of the Wiring Harness
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
3. Procedure
Page 7055
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-009-A01
A. Installation of the Wiring Harness
(1) Put the wiring harness in position on the panel assembly 04-010.
(2) Install the sleeve 04-300, the identification sleeves 04-310, the splices 04-230, the
heat shrinkable tubings 04-280, 04-290 and the label 04-270 on the cables.
(3) Put the bracket 04-060 and the mount cable 04-070 over the wiring harness.
(4) Install the bracket 04-060 and the mount cable 04-070 with the screws 04-030, the
washers 04-040 and the nut 04-050.
(6) Install the receptacle connector 04-120 and the backshell assembly 04-130 with the
coupling screws 04-140 on the attendant indication panel 04-170.
(7) Install the cable terminals 04-420 and the insulations 04-430 on the loudspeaker 04-
110.
(8) Install the plug connector 04-210 on the power unit 04-200.
Page 7056
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-410-804-E01
Installation of the Wiring Harness
1. General
- After assembly, do the tests given in TESTING TASK 23-73-54-700-801-A01, TASK 23-73-
54-700-802-A01 and the checks given in CHECK TASK 23-73-54-210-801-A01 to make sure
that the unit is in the correct condition.
- See the Electrical Standard Practices Manual (ESPM) for more data about the installation
procedures for standard electrical components, wires and connections.
NOTE : See CMMV 33-20-10_C9072 for the ASSEMBLY of the power unit.
NOTE : See CMMV 23-73-22_C9072 for the ASSEMBLY of the attendant indication panel.
A. Referenced Information
REFERENCE DESIGNATION
TASK 23-73-54-300-801-A01 Repair of the Cable Bundle
TASK 23-73-54-300-802-A01 Removal of Nicks, Cracks, Dents and Heat Damage
TASK 23-73-54-700-801-A01 Test of Loudspeaker
TASK 23-73-54-700-802-A01 Test of the Reading Light and the Power Unit
TASK 23-73-54-210-801-A01 Check of the PSIU
CMMV 33-22-04_D8095
CMMV 33-22-06_D8095
CMMV 33-22-35_D8095
CMMV 33-20-10_C9072
CMMV 23-73-22_C9072
Referenced Information
3. Procedure
Page 7057
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
CAUTION : MAKE SURE THAT THE COMPONENT IS CLEAN BEFORE YOU DISASSEMBLE
IT. THIS IS TO PREVENT CONTAMINATION OF INTERNAL PARTS.
Subtask:23-73-54-410-010-A01
A. Installation of the Wiring Harness
(1) Put the wiring harness in position on the panel assembly 05-010.
(2) Install the sleeve 05-300, the identification sleeves 05-310, the splices 05-230, the
heat shrinkable tubings 05-280, 05-290 and the label 05-270 on the cables.
(3) Put the clamps 05-060, 05-070 over the wiring harness.
(4) Install the clamps 05-060, 05-070 with the screws 05-030, the washers 05-040 and the
nuts 05-050.
(6) Install the receptacle connector 05-120 and the backshell assembly 05-130 with the
coupling screws 05-140 on the attendant indication panel 05-170.
(7) Install the cable terminals 05-420 and the insulations 05-430 on the loudspeaker 05-
110.
(8) Install the plug connector 05-200 on the power unit 05-190.
Page 7058
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
TASK 23-73-54-550-801-A01
Component Storage
1. General
- Not applicable
2. Procedure
Subtask:23-73-54-550-003-A01
A. Component Storage
Page 15001
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 15002
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
INTRODUCTION
TASK 23-73-54-872-801-A01
Introduction Illustrated Parts List (IPL)
1. General
A. The procedure recommended for finding a part number, or details of a part are in
paragraph 2 of this introduction.
C. The IPL is used to identify, to get, keep and issue replacement aircraft parts and units.
D. AIRBUS S.A.S. has no responsibility for parts and/or units deleted or revised as a result if
airline initiated modifications are included.
E. Part numbers shown in this document are written to Air Transport Association of America
(ATA) Specification ISPEC 2200.
G. In the Detailed Parts List, each figure has its own page numbering system that starts at
zero.
IPL INTRO
Page 1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(1) The indenture system shows how parts and assemblies relate to their next higher
assemblies (NHA) as follows:
1234567
Assembly
Attaching parts for assembly
.Detail parts for assembly
.Sub-assembly
..Detailed parts for sub-assembly
..Sub-sub-assembly
...Detailed parts for sub-sub-assembly.
IPL INTRO
Page 2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(4) 6 Drawing Responsibility The Engineering Department that is responsible for the
Design.
(5) 0200 Drawing Number The Drawing number.
(6) 000 Part or Assembly Part/assembly number.
(7) 00 Technical Specification Manufacturing or spares requirements suffix.
AIRBUS Part – Numbering System
C. Suffixes
SUFFIXES DEFINITION REMARKS
00 and 40 to 49 Production Part to drawing
The same as the Production Part.
01 to 39 Production Part not to drawing
50 Spare Part to drawing Spare part is not the same as the
51 to 59 Spare Part not to drawing Production Part
60 to 89 Spare Part not to drawing and not Number for Product Support
storable Breakout, but not for Production
99 Spare Part to drawing and not
storable
90 to 94 Specific Part for Repair Kits
95 to 98 Specific Part for Service Bulletin Kits
Suffixes
IPL INTRO
Page 3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
IPL INTRO
Page 4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
IPL INTRO
Page 5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
E. Other Notes
(2) SB XX-XXX
- Identifies the Service Bulletin (SB) which adds to or changes the Detailed
Parts List. When the SB number shown in the name column is related to an
AIRWORTHINESS DIRECTIVE (AD), the letters AD and its number are shown in
parenthesis. Also they will follow the SB number, for example: PRE SB XX XXX
(AD XXXX), POST SB XX XXX (AD XXXX), ADDED by SB XX XXX (AD XXXX),
DELETED BY SB XX XXX (AD XXX), etc.
(4) OVERSIZE/UNDERSIZE
- Identifies a part as oversize or undersize.
(5) OPT TO
- Identifies an optional part that is fully interchangeable with the initial part.
IPL INTRO
Page 6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
(a) These codes agree with the current issue of the Manufacturers Cataloging
Handbook H4/HB:
- Federal Supply Code for Manufacturing (FSCM) or Commercial and
Government Entity (CAGE) code (United States and Canada only).
- NATO Supply Code for Manufacturers (NSCM) codes (does not include
United States and Canada)
(b) The letter ’V’ comes before the vendors code. For suppliers with no official code,
AIRBUS has given a provisional code. These codes are identified in the supplier
table by the information ”DUMMY CODE”.
NOTE : Suppliers who manufacture parts for which AIRBUS S.A.S. has an
exclusive sale right are not given a vendor code.
- AIRBUS standard parts (Prefix DAN, NSA etc...) are given the supplier code
of the seller of the parts. If there is more than one seller, a dummy supplier
code VT0000 is assigned to the related P/N. In this case, the additional
cross-reference table gives, for each P/N the various supplier codes and their
own P/N if applicable.
NOTE : All relevant Supplier Codes are shown in the ’Vendors Name and Code
List’, which is a part of the IPL INTRO.
IPL INTRO
Page 7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
VENDOR LIST
IPL INTRO
Page 8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
IPL INTRO
Page 9
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
IPL INTRO
Page 10
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
A
390
80
90
70
A 50
30
40
90
110
B
120
370
10
60
A
C
320
340
B 90
100
140
330
130
80
90
340 C
380
F_PL_237354_01_0_01_01
Page 10001-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
A
390
A 260
270
260
70 270
75
97
110
290 B
280
280
370
10
C
320
A
340
B
330
85 140
95
340 C 130
380
F_PL_237354_01_A_01_01
Page 10001A-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001A-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001A-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001A-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001A-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001A-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001A-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
A
80
70 30
90
40
390
D 530 385
50
90
110
B
580
30
520 40
60
E
370
60
10
F_PL_237354_01_B_01_01
Page 10001B-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
90
100
80
90
C
510
550 320
330
380
140
130
460
D
450
F_PL_237354_01_B_02_01
Page 10001B-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001B-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001B-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001B-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001B-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001B-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001B-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001B-7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001B-8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
A
80
70 30
90
40
390
570 D 530 385
50
90
110
540 120
580 B
30
520 40
60
E 120
370
560
60
10
F_PL_237354_01_C_01_01
Page 10001C-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
90
100
80
90
C
550
320
340
330
340
380
140
130
460
D
450
F_PL_237354_01_C_02_00
Page 10001C-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-9
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-10
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001C-11
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
A
80
70 30
90
40
390
570 D 530 385
50
90
110
120
580 B
30
520 40
60
E 120
370
60
10
F_PL_237354_01_D_01_00
Page 10001D-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
90
100
80
90
C
510
550
320
330
380
140
130
460
D
450
F_PL_237354_01_D_02_00
Page 10001D-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001D-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001D-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001D-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001D-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001D-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001D-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001D-7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001D-8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10001D-9
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
A 540
170
80
70 30
90
40
160
430 D 380 420
60
90
110
310 120
320 B
30
370 40
50
E
390 120
400
510
50
530
520
10
F_PL_237354_02_0_01_01
Page 10002-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
90
100
80
90
C
330
340
360
350
360
420
140
130
500
D
490
F_PL_237354_02_0_02_00
Page 10002-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-9
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-10
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-11
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002-12
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
540
170
160 260
430 270
260
70 270
A 175
75 420
97
110
290 B 380
320
370
280
300
510 280
410
530
520 10
300
85
95 A 340
C 360
350
330
360
420
B
C
F_PL_237354_02_A_01_00
Page 10002A-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-9
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10002A-10
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
A 470
170
80
70 30
90
40
160
360 D 480 350
60
90
110
120
260 B
30
310 40
50
E
320
330 120
340
440
50
460
450
10
F_PL_237354_03_0_01_00
Page 10003-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
90
100
80
90
C
270
280
300
290
300
350
140
130
430
D
420
F_PL_237354_03_0_02_00
Page 10003-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-9
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-10
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-11
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-12
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10003-13
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
270
290
30
40
230 110
310 60
80 280
A 90 70 300
100
B
210
200
50
180 240
220
190 180 260
10
180 250
190 180
150
160
A
C 120
140
130
170
140
B
300
C
F_PL_237354_04_0_01_00
PANEL-UTILITY,2042VUA
Figure 04 / FIGURE-23-73-54-950-804-01
Page 10004-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10004-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10004-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10004-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10004-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10004-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10004-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10004-7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10004-8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
20
270
290
30
230
40 30
310
60 40
A 280
300
70
80
90
100 B
200
110
190
180 50
240 50
210 260
220
250 10
180
150
160 120
C A 140
130
170
140
300
B
C
F_PL_237354_05_0_01_00
Page 10005-0
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10005-1
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10005-2
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10005-3
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10005-4
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10005-5
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10005-6
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10005-7
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10005-8
23-73-54 Jul 01/22
@AIRBUS
COMPONENT MAINTENANCE MANUAL
Page 10005-9
23-73-54 Jul 01/22