Professional Documents
Culture Documents
JSA Blasting and Coating
JSA Blasting and Coating
Site Location Port of Tembladora Carenage Activity or Area Name Alongside Pier
Facility or Project Bourbon Liberty 243 Specific Location Alongside Pier in way of vessel hull
Operating equipment shall maintain a minimum clearance from overhead energized electrical wires of
10-feet for voltages up to and including 50 kV. NOTE: Clearance distances increase with higher
When personnel are in basket • 100% tie-off must be maintained when transferring at height.
•
•
• Both feet are required to remain on floor of lift equipment when personnel are working from lift equipment
Elevated work Being perform with
man basket and crane
Page 1 of 5
SOB INDUSTRIAL & MARINE LTD JOB HAZARD ANALYSIS
• Be aware - is there anyone working below you?
• Secure all tools (such as using tool lanyards) and materials when working at height, if practicable.
•
Report all dropped object/tool events.
Occupied man basket becoming • For operation with the use of man basket, a support person/banksman shall be assigned any time the
destabilized basket is in the air. This person shall be available at the work-site and shall have been instructed on the
means to use tag line to stabilize the basket movements during operations. Communication (radio or
verbal) between the support person and manlift basket occupants shall be available at all times.
Hand/Foot Injury
Operating a Fuel -Powered Marking off the area or having a spotter will keep pedestrians away from the work area.
Skin Intrusion/Laceration
Pressure Washer Wear safety toe shoes and wear gloves. Keep hands away from the tip of the wand
Eye Injury
Up to 4000psi Keep PPE on during entirety of work
Burns
Avoid contact with hot parts of engine
During preplanning of work check the site for any electrical hazards
Ensure the hose is pointed in a safe direction and test equipment to
ensure it is working properly
Page 2 of 5
SOB INDUSTRIAL & MARINE LTD JOB HAZARD ANALYSIS
An abrasive-blasting respirator must cover the wearer’s head, neck, and shoulders to protect the wearer
from rebounding abrasive.
Workers must use only respirators approved by NIOSH to provide protection from dusts produced during
abrasive-blasting operations.
Support personnel involved in cleanup and other related activities may also need respiratory protection
Trips and falls Marking off the area or having a spotter will keep pedestrians away from the work area.
Lay out all hoses securely and out of the way of pedestrian traffic
PPE to be worn at all time e.g Helmet, glove safety boots etc
Page 3 of 5
SOB INDUSTRIAL & MARINE LTD JOB HAZARD ANALYSIS
Work Activity, Task, or Job Potential Hazard(s) Hazard Control(s)
Step
Support personnel involved in cleanup and other related activities may also need respiratory protection
Stored paints and thinners must not be stored from heat or possible ignition sources e.g near welding
Fire incident cutting operation
Falling Hazards, trips and falls All lifting tools to be inspected before use
PPE to be worn at all time e.g Helmet, glove safety boots etc
Marking off the area or having a spotter will keep pedestrians away from the work area.
Lay out all hoses securely and out of the way of pedestrian traffic
Page 4 of 5
SOB INDUSTRIAL & MARINE LTD JOB HAZARD ANALYSIS
10
11
12
13
14
15
16
Page 5 of 5