BITUSOL
BLACK BITUMEN PAINT
BITUSOL is a cold applied solvent
based Black Bitumen Paint, used for
waterproofing, corrosion protection,
damp proof courses and general
barrier needs of the construction
industry. It is recommended for use as
a primer coat, before installation of
bitumen membrane.
USES
BITUSOL provides an excellent water-
proof coating and vapour barrier for
concrete and block foundation below
ground level to protect against
corrosive salts present in the soil. It is
also used in protection of metals to
prevent corrosion.
FEATURES
“Strong adhesion to metal, wood,
concrete etc.
“Resistant to corrosive elements
Present in soil.
-Easy to apply by brush/roller.
‘Cold applied and single compo-
nent.
‘Quick drying and excellent coverage.
“Economical
eA PRODUCT CHARACTERISTICS
‘Olour
Nan : Black
Soli ‘ : Solvent Based
Olid content 2 65%
Flash Point +> 50°C
i
all constructionproducts
STANDARD
Complies with relevant clauses of BS
3416 : 1988 & BS 6949 : 1991,
SURFACE PREPARATION
In most of the surface coating systems,
preparation of the surface is impor-
tant. Ensure surface is clean, sound,
dry and stable. Free from oil, grease,
curing compound and loosely adher-
ing dust, rust etc. These can be
removed by stiff wire brush.
APPLICATION
Generally two coats are recommended
for better protection. Allow first coat
to dry before applying second coat.
BITUSOL can be applied by brush,
roller or spray equipment. Drying time
between coats can vary depending
upon the climatic condition of the site.
Take an average time of 2 to 3 hours
between coats.
COVERAGE
3-7 m’/litre/coat.
Please note coverage figures are for
guidance and will vary depending on
operational parameters such as poros-
ity, smoothness of the substrate, etc.
STORAGE/SHELF LIFE
BITUSOL is based on flammable solvents.
Se-
BLACK BITUMEN PAINT
Take all precautions for safe handling.
Keep away from naked flames and
heat sources. Smoking should be
prohibited in the areas of application.
Store in a well-ventilated shed and
from direct sunlight. The shelf life of
the product is at least 12 months from
the date of its manufacturing provided
it is kept in original unopened drums
and stored under normal warehouse
conditions.
CLEANING
Tools can be cleaned with white spirit
or petroleum based thinner immedi-
ately after use. Once dry, by mechani-
cal means only.
PACKING
200 litre drum and 14 It.pail
TECHNICAL SERVICES
Technical assistance and information
is available by calling Falcon Chemi-
cals (LLC) on specific requirements.
HEALTH AND SAFETY
Use normal safety precautions, Wear
rubber hand gloves, safety shoes
and safety goggles while using and
FALCON CHEMICALS L. L. C
P.O BOX 2924 - Dubai, Tel; 00971 4 880 1444 / 8801818 (Fax)
‘sua.¢¢90 9m Web: wr falconchemicals.com, E-mail: inquiry@taleonchemicals.
An ISO 9001 & Isq sanni conified C
handling the product. Avoi
with skin and eyes. In case tae
tal contact with eyes, wash with pan
of water and seek medical treatment
immediately.
DISCLAIMER
Use this leaflet as a guide for the use of
the product concerned. The informa-
tion given is in accordance with latest
technical developments. However, we
cannot accept liability/responsibility
for any work carried out with our
materials, as we have no control Over
the method of application used or the
condition of site involved.
ISSUE DATE: JANUARY 2013
This technical specification supercedes
all previous data sheets.
com