Professional Documents
Culture Documents
Infineon IRFS31N20D DataSheet v01 01 en
Infineon IRFS31N20D DataSheet v01 01 en
Infineon IRFS31N20D DataSheet v01 01 en
Benefits
l Low Gate to Drain to Reduce Switching
Losses
l Fully Characterized Capacitance Including
Effective COSS to Simplify Design,(See
AN 1001)
l Fully Characterized Avalanche Voltage
and Current
TO-220AB D2Pak TO-262
IRFB31N20DPbF IRFS31N20DPbF IRFSL31N20DPbF
www.irf.com 1
3/1/04
IRFB/S/SL31N20DPbF
Static @ TJ = 25°C (unless otherwise specified)
Parameter Min. Typ. Max. Units Conditions
V(BR)DSS Drain-to-Source Breakdown Voltage 200 ––– ––– V VGS = 0V, ID = 250µA
∆V(BR)DSS/∆TJ Breakdown Voltage Temp. Coefficient ––– 0.25 ––– V/°C Reference to 25°C, ID = 1mA
RDS(on) Static Drain-to-Source On-Resistance ––– ––– 0.082 Ω VGS = 10V, ID = 18A
VGS(th) Gate Threshold Voltage 3.0 ––– 5.5 V VDS = VGS, ID = 250µA
––– ––– 25 VDS = 200V, VGS = 0V
IDSS Drain-to-Source Leakage Current µA
––– ––– 250 VDS = 160V, VGS = 0V, TJ = 150°C
Gate-to-Source Forward Leakage ––– ––– 100 VGS = 30V
IGSS nA
Gate-to-Source Reverse Leakage ––– ––– -100 VGS = -30V
Dynamic @ TJ = 25°C (unless otherwise specified)
Parameter Min. Typ. Max. Units Conditions
gfs Forward Transconductance 17 ––– ––– S VDS = 50V, ID = 18A
Qg Total Gate Charge ––– 70 107 ID = 18A
Qgs Gate-to-Source Charge ––– 18 23 nC VDS = 160V
Qgd Gate-to-Drain ("Miller") Charge ––– 33 65 VGS = 10V
td(on) Turn-On Delay Time ––– 16 ––– VDD = 100V
tr Rise Time ––– 38 ––– ns ID = 18A
td(off) Turn-Off Delay Time ––– 26 ––– RG = 2.5Ω
tf Fall Time ––– 10 ––– RD = 5.4Ω,
Ciss Input Capacitance ––– 2370 ––– VGS = 0V
Coss Output Capacitance ––– 390 ––– VDS = 25V
Crss Reverse Transfer Capacitance ––– 78 ––– pF ƒ = 1.0MHz
Coss Output Capacitance ––– 2860 ––– VGS = 0V, VDS = 1.0V, ƒ = 1.0MHz
Coss Output Capacitance ––– 150 ––– VGS = 0V, VDS = 160V, ƒ = 1.0MHz
Coss eff. Effective Output Capacitance ––– 170 ––– VGS = 0V, VDS = 0V to 160V
Avalanche Characteristics
Parameter Typ. Max. Units
EAS Single Pulse Avalanche Energy ––– 420 mJ
IAR Avalanche Current ––– 18 A
EAR Repetitive Avalanche Energy ––– 20 mJ
Thermal Resistance
Parameter Typ. Max. Units
RθJC Junction-to-Case ––– 0.75
RθCS Case-to-Sink, Flat, Greased Surface 0.50 ––– °C/W
RθJA Junction-to-Ambient ––– 62
RθJA Junction-to-Ambient ––– 40
Diode Characteristics
Parameter Min. Typ. Max. Units Conditions
IS Continuous Source Current MOSFET symbol D
––– ––– 31
(Body Diode) showing the
A
ISM Pulsed Source Current integral reverse G
VSD Diode Forward Voltage ––– ––– 1.3 V TJ = 25°C, IS = 18A, VGS = 0V
trr Reverse Recovery Time ––– 200 300 ns TJ = 25°C, IF = 18A
Qrr Reverse RecoveryCharge ––– 1.7 2.6 µC di/dt = 100A/µs
ton Forward Turn-On Time Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
2 www.irf.com
IRFB/S/SL31N20DPbF
8.0V 8.0V
7.0V 7.0V
6.5V 6.5V
100 6.0V 6.0V
BOTTOM 5.5V BOTTOM 5.5V
100
10
10
1 5.5V
1000 3.0
ID = 30A
R DS(on) , Drain-to-Source On Resistance
I D , Drain-to-Source Current (A)
2.5
100
TJ = 175 ° C 2.0
(Normalized)
10 1.5
TJ = 25 ° C
1.0
1
0.5
V DS = 50V
20µs PULSE WIDTH VGS = 10V
0.1 0.0
5 6 7 8 9 10 11 -60 -40 -20 0 20 40 60 80 100 120 140 160 180
VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature ( °C)
100000
20
VGS = 0V, f = 1 MHZ
ID = 18A
Ciss = Cgs + Cgd, Cds SHORTED VDS = 160V
Ciss 12
1000
Coss 8
100
Crss 4
1000 1000
OPERATION IN THIS AREA LIMITED
BY RDS(on)
ISD , Reverse Drain Current (A)
100
I D , Drain Current (A)
100
10us
TJ = 175 ° C
10
100us
10
TJ = 25 ° C
1 1ms
TC = 25 ° C
TJ = 175° C 10ms
V GS = 0 V Single Pulse
0.1 1
0.2 0.4 0.6 0.8 1.0 1.2 1 10 100 1000
VSD ,Source-to-Drain Voltage (V) VDS, Drain-to-Source Voltage (V)
30 RD
V DS
VGS
25 D.U.T.
RG
+
ID , Drain Current (A)
-VDD
20
10V
Pulse Width ≤ 1 µs
15
Duty Factor ≤ 0.1 %
VDS
5
90%
0
25 50 75 100 125 150 175
TC , Case Temperature ( °C)
10%
VGS
Fig 9. Maximum Drain Current Vs. td(on) tr t d(off) tf
Case Temperature
Fig 10b. Switching Time Waveforms
1
Thermal Response (Z thJC )
D = 0.50
0.20
0.1 0.10
PDM
0.05
t1
0.02 t2
SINGLE PULSE
0.01 (THERMAL RESPONSE)
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJC + TC
0.01
0.00001 0.0001 0.001 0.01 0.1 1
t1 , Rectangular Pulse Duration (sec)
www.irf.com 5
IRFB/S/SL31N20DPbF
1000
15V ID
RG D.U.T + 600
V
- DD
IAS A
20V
tp 0.01Ω
400
V(BR)DSS
tp
0
25 50 75 100 125 150 175
Starting TJ , Junction Temperature ( °C)
Current Regulator
Same Type as D.U.T.
QG
50KΩ
10 V 12V .2µF
.3µF
QGS QGD +
V
D.U.T. - DS
VG VGS
3mA
IG ID
Charge Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform Fig 13b. Gate Charge Test Circuit
6 www.irf.com
IRFB/S/SL31N20DPbF
+
- +
-
RG • dv/dt controlled by RG +
• Driver same type as D.U.T. VDD
-
• ISD controlled by Duty Factor "D"
• D.U.T. - Device Under Test
VGS=10V *
Reverse
Recovery Body Diode Forward
Current Current
di/dt
D.U.T. VDS Waveform
Diode Recovery
dv/dt
VDD
Re-Applied
Voltage Body Diode Forward Drop
Inductor Curent
Ripple ≤ 5% ISD
www.irf.com 7
IRFB/S/SL31N20DPbF
8 www.irf.com
IRFB/S/SL31N20DPbF
OR
P AR T N U M B E R
IN T E R N AT IO N AL
R E C T IF IE R F 530S
L O GO
D AT E CO D E
P = D E S IG N AT E S L E AD -F R E E
AS S E M B L Y P R O D U C T (O P T IO N AL )
L OT COD E Y E AR 0 = 2 0 0 0
W E E K 02
A = AS S E M B L Y S IT E CO D E
www.irf.com 9
IRFB/S/SL31N20DPbF
IGBT
1- GATE
2- COLLECTOR
3- EMITTER
OR
PART NUMBER
INT ERNAT IONAL
RECT IFIER
LOGO
DAT E CODE
P = DES IGNAT ES LEAD-FREE
AS S EMBLY PRODUCT (OPTIONAL)
LOT CODE YEAR 7 = 1997
WEEK 19
A = AS S EMBLY S ITE CODE
10 www.irf.com
IRFB/S/SL31N20DPbF
D2Pak Tape & Reel Infomation
Dimensions are shown in millimeters (inches)
TRR
1.60 (.063)
1.50 (.059)
1.60 (.063)
4.10 (.161) 1.50 (.059)
3.90 (.153) 0.368 (.0145)
0.342 (.0135)
FEED DIRECTION
30.40 (1.197)
NOTES : MAX.
1. COMFORMS TO EIA-418. 26.40 (1.039) 4
2. CONTROLLING DIMENSION: MILLIMETER. 24.40 (.961)
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE. 3
Notes:
Repetitive rating; pulse width limited by Pulse width ≤ 300µs; duty cycle ≤ 2%.
max. junction temperature.
Starting TJ = 25°C, L = 3.8mH
Coss eff. is a fixed capacitance that gives the same charging time
RG = 25Ω, IAS = 18A. as Coss while VDS is rising from 0 to 80% VDSS
ISD ≤ 18A, di/dt ≤ 110A/µs, VDD ≤ V(BR)DSS, This is only applied to TO-220AB package
TJ ≤ 175°C
This is applied to D2Pak, when mounted on 1" square PCB ( FR-4 or G-10 Material ).
For recommended footprint and soldering techniques refer to application note #AN-994.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.03/04
www.irf.com 11
Note: For the most current drawings please refer to the IR website at:
http://www.irf.com/package/
IMPORTANT NOTICE
The information given in this document shall in no For further information on the product, technology,
event be regarded as a guarantee of conditions or delivery terms and conditions and prices please
characteristics (“Beschaffenheitsgarantie”) . contact your nearest Infineon Technologies office
(www.infineon.com).
With respect to any examples, hints or any typical
values stated herein and/or any information
regarding the application of the product, Infineon WARNINGS
Technologies hereby disclaims any and all Due to technical requirements products may
warranties and liabilities of any kind, including contain dangerous substances. For information on
without limitation warranties of non-infringement the types in question please contact your nearest
of intellectual property rights of any third party. Infineon Technologies office.
In addition, any information given in this document Except as otherwise explicitly approved by Infineon
is subject to customer’s compliance with its Technologies in a written document signed by
obligations stated in this document and any authorized representatives of Infineon
applicable legal requirements, norms and Technologies, Infineon Technologies’ products may
standards concerning customer’s products and any not be used in any applications where a failure of
use of the product of Infineon Technologies in the product or any consequences of the use thereof
customer’s applications. can reasonably be expected to result in personal
injury.
The data contained in this document is exclusively
intended for technically trained staff. It is the
responsibility of customer’s technical departments
to evaluate the suitability of the product for the
intended application and the completeness of the
product information given in this document with
respect to such application.