Professional Documents
Culture Documents
Penetration Inspection Checklist
Penetration Inspection Checklist
Please tick () where applicable. Day-1 Day-2 Day-3 Day-4 Day-5 Day-6 Day-7
1. Guardrails and/or toe boards have been inspected to be strong, rigid and in good condition
2. To remove the entire piece of wire steel mesh to install duct/equipment to occupy the entire opening, all
workers must wear body harness and adequately anchor with fall protection such as guardrails, self-rewinding
fall arrestor, etc.
3. Fall protection-full body harness, anchorage point, safety net, lifelines are provided to workers trained in
the correct use of all these equipment.
6. Installed duct/pipes/equipment are secured to prevent dislodge and fall through opening
7. Openings (new and existing) must be covered and secured when work finishes within the same day