Professional Documents
Culture Documents
Cruze 1.8L Eng VIN H Timing Belt Replacement
Cruze 1.8L Eng VIN H Timing Belt Replacement
Special Tools
TIMING BELT REPLACEMENT (1.6L LDE, LXV, 1.8L 2H0, AND LUW) >
INSTALLATION PROCEDURE
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 2 of 13
1. Install the timing belt (1) in the enclosed assembly tool (2).
2. Guide the timing belt through the engine mount bracket with the assembly tool.
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 3 of 13
5. Guide the timing belt past the tensioner and place it on the crankshaft sprocket wheel.
6. Place the timing belt on the exhaust and intake camshaft position actuator adjusters.
8. Apply tension to the timing belt tensioner (2) in the direction of the arrow, using an Allen
key (1).
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 4 of 13
11. Tighten the timing belt tensioner bolt to 20 N.m (15 lb ft).
Fig 3: Locking Device And Bolt
14. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 5 of 13
1. Turn the crankshaft 720° in the direction of engine rotation by the bolt on the
crankshaft balancer.
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 6 of 13
2. Install EN-6340: locking tool -left (1) into the camshaft position actuator adjusters
as shown.
3. Install EN-6340: locking tool -right (2) into the camshaft position actuator
adjusters as shown.
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 7 of 13
Fig 5: Aligning Timing Belt Drive Gear And Oil Pump Housing
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 8 of 13
20. Install EN-6625: locking device (2) and the bolt (1) to block the crankshaft.
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 9 of 13
22. Install the 4 lower timing belt cover bolts (2) and tighten to 6 N.m (53 lb in).
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 10 of 13
24. Install a NEW crankshaft balancer bolt (1) and tighten in 3 passes using the EN-45059:
sensor kit :
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 11 of 13
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 12 of 13
27. Install the bolt (1) and tighten to 75 N.m (55 lb ft).
28. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
29. Install the compartment splash shield. Refer to Front Compartment Splash Shield
Replacement .
30. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
31. Install the timing belt upper front cover. Refer to Timing Belt Upper Front Cover
Replacement (1.6L LDE, LXV, 1.8L 2H0, and LUW) .
32. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (1.6L LDE,
LXV, and 1.8L 2H0) .
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018
Printer Friendly View Page 13 of 13
https://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms... 11/21/2018