Professional Documents
Culture Documents
AN5506-07 GPON Optical Network Unit User Manual (Version C) 365C
AN5506-07 GPON Optical Network Unit User Manual (Version C) 365C
AN5506-07 GPON Optical Network Unit User Manual (Version C) 365C
4 Technical Specification
Wall mounting
Table_Product type and technical specifications
User Manual
Power Dimension
Type Weight (kg) Temperature (℃)
Consumption (W) (H×W×D) (mm)
AN5506-07-A 2.07 <25 43.5×440×190
AN5506-07-BH 2.35 <35 43.5×440×225 (with -30 to 55
AN5506-07 AN5506-07-BHD 2.37 <35 no mounting ears)
1
residential communities and enterprises, the AN5506-07 GPON offers information, The port is connected to the user terminals without data
3 5
ON
communication and entertainment services, including data, voice and video. transmission.
Step2 Align the recesses on the AN5506-07’s bottom panel with the screws
Orange
(left) Blinking
The port is connected to the user terminals with data on the wall and fix them up gently.
FE1 to FE16 transmission.
OFF The port is not connected to the user terminals.
Step3 Take your hands off the AN5506-07 slowly and make sure the
equipment is mounted on the wall with the support of the screws.
Green ON The port is connected to the user terminals.
(right) OFF The port is not connected to the user terminals.
2 4 6
Supports the AES-128 algorithm for data encryption of downlink data in the Step2 Align the screw holes of the mounting ears on both sides of the
GPON system. AN5506-07 with the floating nuts and push them slowly until they are
Provides performance statistics on the Ethernet interfaces. Step1 Take out the AN5506-07 from the carton. Four self-adhesive pads are close to each other. Then install the screws into the screw holes of
Performs various QoS functions: supports global configuration of queue priority the floating nuts and tighten them.
attached to the four corners on the bottom of the device before delivery.
and flexible mapping of 802.1p value of packets.
Supports SP, WRR and SP+WRR scheduling modes: configures the weight of Step3 Take your hands off the AN5506-07 slowly and make sure the
Step2 Gently place the AN5506-07 on a stable surface that guarantees
the scheduling queue so as to guarantee the quality of VoIP, IPTV and other key ventilation on both the left and right sides. equipment is mounted in the cabinet with the support of the screws.
services when conducting multi-services.
Equipment Installation FAQs
3 Cable and Wire Connection Q: All indicator LEDs are extinguished after power-on.
A: 1) Check whether the power cable is correctly connected.
Fiber
AN55 Home
16-01
2) Check whether the power switch on the equipment’s front panel is in the
ON position.
Q: The equipment fails to work.
A: 1) If the equipment works abnormally, check whether the power is connected
External dry contact normally or the voltage is within specifications.
2) If the equipment is overheated, check the surroundings, the ventilation and
the fan.
OLT Q: The LOS indicator LED is ON.
Equipment grounding A: 1) Check the received optical power levels with an optical power meter.
ODN
Excessively low receive optical power may indicate the fiber is faulty.
ODF distribution frame 2) Check whether the optical fiber is connected normally to the appropriate interface.
3) The received optical power at the ONU exceeds the normal powerrange (the
optical power is too low or overload).
4) The ONU optical module is aged or damaged.
5) Check whether the equipment at the central office end is operating normally.
Q: PON indicator LED is OFF.
A: 1) The optical fiber connectors may not be securely connected. Check whether
the optical fibers are connected normally and whether the optical power is
below specifications;
2) The connectors may be dusty. Clean the connectors with cotton balls dampened
Hybrid with alcohol.
wiring mode 3) The ONU cannot register to the OLT or the registration fails, check the ONU
8
Dedicated authentication and authorization configuration.
interface mode
Q: POTS indicator LED is ON in on-hook state.
Data The 1st, 2nd A: 1) One or more POTS line is shorted. Check for shorted lines;;
3rd and 6th wires Voice
distribution frame 2) The fourth and fifth lines of the RJ-45 interface are voice signal lines and cannot
distribution frame be connected with computers of the opposite end. Otherwise, shorting will occur.
220V mains supply
The 4th
and 5th wires
The 7th and 8th wires
Brown 0V
Computer -48V
Blue DC
power supply
Yellow- / green
Telephone GND
7
4 8
Battery capacity 2 40 Orange- / white 48 Orange- / white Zip code: 430074
power-off alarm
7 White 15 Red
41 Green- / white
7
49 Green- / white
15 Website: http://www.fiberhomegroup.com
8 White 16 Red
8 16
42 Brown- / white 50 Brown- / white