Professional Documents
Culture Documents
1.TPFLEX Insulation EN
1.TPFLEX Insulation EN
Insulation
IE
Insulation tape
Insulation
TPSOUND IE
16 TPTAPE
IE
17 TPGLUE
0886 99 5959
0886 99 5959
19
TPFLEX STD is a high standard product, which is manufactured according to the ASTM C534 standard. TPFLEX STD is popularly used in refrigerant
in dustry in purpose of preventing condensation and saving energy. The products have low and stable thermal conductivity K- value, high water vapor
permeaability µ value and achieve USA fire test UL 94 Class V-0
40 to 80
Life-time
Sevice life-time under proper
installation condition ≥ 10 years
0.035
Water Absorption
0886 99 5959
156 (110) 49 28 (18)
120 90 28 (18)
72 (16)
90 63
72
64 48 26
56
49 20 16
20 5
36 30 20 (9)
18 (9)
25
30 15
30 13 6
30 13 7 6
30 9 7 6
1180mm
26 8 7
(18) 12 8 7
1110mm
550mm
(18) (12) 8 5
(18) (12) 6 5
6 5 4
8 0886 99 5959
9
19
Class 0 Product
TPFLEX CLASS 0 is a premium standard product, which is manufactured according to the ASTM C534 standard and meet England fire standard BS.
Products have low flame spread following BS 476 part 7 and low fire propagation following BS 476 part 6.
40 to 80
Life-time
Sevice life-time under proper
installation condition ≥ 10 years
0.035
10 0886 99 5959
11
PACKING
FOR PIPING
INSULATION
120 90 28 (18)
72 (16)
FOR DUCTING
INSULATION
90 63 36
FOR DUCTING
INSULATION 72
FOR DUCTING
INSULATION 64 48 26
56
49 20 16
FOR PIPING
INSULATION
20 5
36 20 (9) 8
18 (9) 6
25 6
30 6
30 13 6
30 13 (7) 6
26 (7)
(*) 12 (7)
FOR PIPING
INSULATION (5)
(6) (5)
(6)
12 0886 99 5959
13
IE
SPECIFICATIONS
TPSOUND IE is NBR / PVC based vulcanized rubber insulation, semi-open cell structure • PVC6525 adopts black color PVC film as backing, combined with a high performance solvent acrylic
adhesive, It is mainly used for rubber foam packaging and sealing.
75mm
50mm
UL 94 Class V-0 Adhesion to Steel 20 N/25mm PSTC-133 / ASTM D 3652
Fire Performance BS 476 part 6,7
Class 0
Rolling Tack 10 mm PSTC-101 / ASTM D 3330
Material Elastomeric Insulation, NBR/ PVC based
Service Temperature -20 ~ +60 °C PSTC-6 / ASTM D 3121 THICKNESS WIDTH LENGTH ROLLS/ CARTON
Color Black colour, built-in adhesive
0.11mm 50mm 50m 24
Cell structure Semi-open cell Applying Temperature +10 ~ 40 °C PSTC-131 / ASTM D 3759 0.11mm 75mm 50m 16
Density 40 - 80 kg/m3
DUCT Waste Water Service Temperature -20 ~ +80 °C -4 ~ +176 °F ------------ CODE THICKNESS WIDTH LENGTH ROLLS/ CARTON
Applying Temperature +10 ~ 40 °C +50 ~ +105 °F ------------ TPALU16 16 Micron 50mm 25m 36
Sheet roll with adhesive side: add “AD” at the end of code IE Tensile Strength 255 N/25mm 58.0 Lb/In PSTC-131 / ASTM D 3759
Providing all requirements in a variety of diameters, thicknesses and lengths Elongation 3.0 % 3.0 % PSTC-131 / ASTM D 3759
Service Temperature -20 ~ +80 °C -4 ~ +176 °F ------------ CODE THICKNESS WIDTH LENGTH ROLLS/ CARTON
Applying Temperature +10 ~ 40 °C +50 ~ +105 °F ------------ TPALU120 120 Micron 50mm 25m 36
14
14 0886 99 5959
15
15
DESCRIPTION DESCRIPTION
A black, air-drying contact adhesive that is excellent for joining seams and butt joints of TPFLEX Pipe and
TPTAPE is an elastomeric closed cell self- adhensive foam gasket tape for cooling and heating air-duct Sheet Insulations.
1. Surfaces of materials: dry, clean and free from dust, sand, oil, grease
joint connectuons to prevent air leakage, reduce vibration/ noise and also serves as thermal insulation to
2. Stir TPGLUE well and use short hair brush to apply a layer of TPGLUE on the 2
prevent condensation and heat transfer. With arcylic pressure sensitive adhensive, TPTAPE is easily istalled on
joinning surfaces
the surface of the connectuon joint. 3. After applying TPGLUE on the surface, wait for the solvent to evaporate about
5-30 minutes depending on the glue content until the surface is dry and sticky
4. Time required for 2 surfaces to be bonded:
SPECIFICATION
+ Minimum 5 minutes: non-absorbent or non-permeable surfaces such as PVC,
PPR, steel pipes.,
+ Minimum 2 minutes: with absorbent or permeable surfaces such as TPFLEX
insulation,
5. Press the surfaces to get the best bonding
SPECIFICATION
Material Polychloroprene
Appearance Black viscous liquid
Viscosity 2,000 - 3,000 cPs.
Solid content 24.00 - 26.00 %
High heat resistance Approx. over 100 oC
Open tack time Short
Application temp Room temp
Converage
200 - 220 g/m2
(apply adhesive both surfaces)
PACKING
16 0886 99 5959
17
TPTECH’S TYPICAL PROJECTS TPTECH’S TYPICAL PROJECTS
The Matrix One, Ha Noi BRG Oriental Plaza, Ha Noi Projects in the North Projects in the South
The Matrix One My Dinh, Ha Noi Stella Vo Van Kiet Binh Tan, Ho Chi Minh
Imperial Smart City Tay Mo, Ha Noi An Phong Tower Binh Thanh, Ho Chi Minh
Mipec Xuan Thuy Cau Giay, Ha Noi Vinhomes Grand Park District 9, Ho Chi Minh
TNR Tran Hung Dao Hoan Kiem, Ha Noi Shopping Center Go! (Big C) Ben Tre
Masteri Water Front Gia Lam, Ha Noi Shopping Center Go! (Big C) Ba Ria Vung Tau
BRG Oriental Plaza Lang Ha Ba Dinh, Ha Noi UAC Factory Danang hi-tech park, Da Nang
Vinhomes Ocean Park Gia Lam, Ha Noi Regent Phu Quoc Resort Phu Quoc
Vinhomes Smart City Tay Mo, Ha Noi Fiore Healthy Resort Phan Thiet
Vinhomes Times City T14, T26 Hai Ba Trung, Ha Noi Marvella Hotel Nha Trang
Vinfast Factory, Hai Phong Masteri Waterfront, Ha Noi
Me Linh Plaza Thanh Hoa Crowne Plaza Starbay Phu Quoc
Techno Park Tower (Vinfast Office 45F) Gia Lam, Ha Noi Grand World Hotel Phu Quoc, Kien Giang
18 0886 99 5959
202106
19