Professional Documents
Culture Documents
Stress Analysis Report
Stress Analysis Report
1. Data Specification:
a) Material : Steel Mild, SHS 30x30x2 mm
Steel Mild, Plate 03 mm
Steel Mild, Plate 10 mm
Wire mesh
b) Mast Density : 7,85 g/cm^3
c) Yield Strength : 207MPa
d) Ultimate Strength : 345MPa
e) Total Mass : 84,77Kg
2. Design:
4 Lifting Point
2 Constrain
Forced Direction
4. Simulation Result
Load Applied Max Stress Ultimate Strength Max Displacement Safety Factor
Ul
75Kg 13,94MPa 207MPa 0,1036 15ul
5. Conclusion:
a. Design is safe to be implemented, Max Stress is under ultimate strength 207 MPa <
345 MPa for load capacity is 75Kg.
b. Design is safe because maximum displacement 0,1036 mm for towing.
c. For capacity will be 75Kg, stress max. 13,94 MPa < 345 MPa.
d. Non-Destructive Test (NDT) 8Ea Towing Point
e. Using proper towing gears (webbing/sling), 4 Bow Shackle.