Professional Documents
Culture Documents
Butterfly Valve
Butterfly Valve
Butterfly Valve
SL NO DESCRIPTIONS
1 PROJECT SPECIFICATION
2 COMPLIANCE STATEMENT
3 PROJECT BOQ
4 PROJECT DRAWINGS
6 COMPANY PROFILE
7 TRADE LICENSE
9 COUNTRY OF ORIGIN
10 ISO CERTIFICATE
11 TEST CERTIFICATE
Flap valves shall be designed for a nominal pressure rating of 10 bar which shall be
marked on the valve body, and a liquid temperature of 52° C.
Flaps and frames shall be of all stainless steel construction in Grade 316 or higher
with end flange faced and drilled to an approved international standard. Mating
surfaces of flaps and frames shall be of an approved non-metallic material to ensure
a watertight fit in the closed position.
Valve shall be double hinge type for optimum sealing, hinge pins shall be of Stainless
steel grade 316; flaps shall be double hung and seated off the vertical.
Hinge pins shall be of stainless steel and all flaps shall be double hung and seated off
the vertical.
Butterfly valves shall comply in all respects with approved International standards.
Body shall be with all flanges faced and drilled to PN 10 or PN16, as detailed, and
face to face length to ISO 5752-Series 13 or 14 as recommended by the engineer and
approved by the employer. Inner face of valve body shall have vulcanized (firmly
bonded) liner of 6 mm thick( minimum), hard rubber or EPDM, whichever is most
suitable for the flow medium, extending seamless over body seat face, bearing bore
and sealing faces of connecting flanges. The disc shall be made of Ductile Cast Iron,
Aluminium Bronze, Stainless Steel Grade 316 or Duplex Stainless Steel complying
with approved international standards and depending on the application. Discs of
ductile iron shall have vulcanized, firmly bonded, 6 mm thick(minimum), seamless
lining of hard rubber or EPDM whichever is most suitable for the flow medium.
Valves with discs of aluminium bronze or stainless steel shall have the inner face of
valve body lined with suitable material, of sufficient thickness, highly resistant to
mechanical stresses due to possible dragging of disc on the sealing seat during
operation. Liner shall be integral part of the body/disc and shall be durable for the life
of the valve. Valves with alternative coating or lining for the inner face of the body
and disc may be acceptable on submission of data sheets and all other documents, to
the engineer, confirming the suitability of the proposed coating material for the flow
medium.
Disk shall be mounted on stainless steel shafts located in PTFE lined self lubricating
bearings with synthetic nitrile rubber shaft seal.
2016
General Specifications for Mechanical Works
Dubai Municipality
Drainage and Irrigation Department
The valve disc shall be generally double offset eccentric type fitted with a non-ageing
sealing element of EPDM (EPDM Profile Seal) or similar approved material held in
place by an adjustable one-piece stainless steel clamping ring secured with Stainless
Steel adjusting set screws mechanically locked in place (not resin bonded). The
profile seal shall provide a bi-directional tight shut off in accordance with ISO 5208
Cat.A.
The valve disc shall be as streamlined as possible to ensure lowest head losses and
secure movement without disk flutter. Disc shall be designed for optimum hydraulic
flow pattern with negligible swirl and turbulence of water at two stub ends on
opposite sides of the disc.
Mill certificate records, for the body and the disc, detailing mechanical properties,
chemical composition etc. as per EN 10204 3.1B or any other approved international
standard shall be submitted with the valve.
The disc stub shafts shall be manufactured from Stainless Steel, and positively keyed
to the valve disk and incorporate a key securing device (valve discs pinned to stub
shafts are not acceptable).The shafts shall be designed to withstand the maximum
torque that will be imposed by the operator.
The epoxy coated valve gearbox shall be fitted with a sealed for life maintenance-free
travelling fork and nut gearbox, suitable for buried service duty and capable of easy
operation at full pressure differential equal to nominal pressure, embossed in cast iron
casing, grease packed, with ball thrust bearings coupled with hand wheel and position
indicator. Gear box enclosure shall be of protection class IP67 minimum.
Travelling fork and nut gearboxes or slider crank gear boxes shall be used depending
on the size of the valve and according to the pressure rating.
Requirement of double eccentricity for disc shall be waived and centred disc
butterfly valve shall be acceptable under the following conditions:
2016
General Specifications for Mechanical Works
Dubai Municipality
Drainage and Irrigation Department
d) Valve shaft (two piece shaft) shall be inserted into the disc hubs for a distance
of atleast 150% of the shaft diameter.
e) There shall not be any contact of the pumping medium with the valve shaft
and shaft sealing shall be positive and long lasting.
g) Positive sealing ( tight shut-off) with no leakage in either flow direction shall
be guaranteed.
Protective coating shall be 300 micron DFT fusion bonded epoxy and holiday- free,
and application of coating to be at place of manufacture. Construction bolts to be
S.S.316 and shall not be painted. Transit/ installation damages of protective coating
shall be made good using site repair pack supplied by the manufacturer. If coating /
lining on the inner face of the valve is found damaged the valve shall be rejected and
no field repair of the inner face will be allowed.
Valve shall be suitable for bidirectional flow and shall guarantee zero leakage shut
off against the full unbalanced head acting on either side of closed slide.
Valve shall have full bore opening available for flow in the fully open position
Valve body shall be nodular cast iron ( Ductile Iron) GGG50 or duplex stainless steel
depending on the application and the body shall incorporate specially contoured
flush-out corners in the invert, such that all solids in the blade guides pushed down
to the invert as the slide is closed are flushed into the flow by the increased velocity
of the medium. The valve body shall have increased clearance in the chest area to
minimise the possibility of solid material causing the valve getting jammed.
The valve slide shall be grade 316L stainless steel, ground on its faces and two long
edges, and shall have a leading edge radius larger than the valve bore radius,
incorporating a single chamfer to give a cutting action through solids in the line onto
2016
COMPLIANCE STATEMENT
DOCUMENT: COMPLIANCE STATEMENT
PROJECT NAME: R1105 - INTERCHANGES OF GARN AL SABKHA AND SH. MOHAMMED BIN ZAYED ROAD
PRODUCT DOUBLE ECCENTRIC BUTTERFLY VALVE PN16 RATING, SIZE: 800MM & 1000MM
Clause Comply/
Specification Remarks
No. Deviate
19.6.6.3 Butterfly Valves
1 The proposed are Double Eccentric Butterfly Valve with
Butterfly valves shall comply in all respects with approved
Comply worm gearbox construction complies to EN 593 (DIN
international standards.
3354).
2 Body shall be with all flanges faced and drilled to PN 10 or PN16, as The proposed Double Eccentric Butterfly Valve with
detailed, and face to face length to ISO 5752-Series 13 or 14 as Comply worm gearbox is PN16 rating and drilled with face to face
recommended by the engineer and approved by the employer. in accordance with DIN 3202-1 F4 (EN 558-1 series 14).
3 Inner face of valve body shall have vulcanized (firmly bonded) liner
of 6 mm thick(minimum), hard rubber or EPDM, whichever is most Proposed are Double Eccentric Butterfly Valve with worm
Noted
suitable for the flow medium, extending seamless over body seat gearbox.
face, bearing bore and sealing faces of connecting flanges.
4 The disc shall be made of Ductile Cast Iron, Aluminum Bronze,
the proposed double eccentric butterfly valve with worm
Stainless Steel Grade 316 or Duplex Stainless-Steel complying with
gearbox has ductile iron EN-GJS-500-7 body which is
approved international standards and depending on the application.
Comply superior to cast iron and aluminum bronze, with Duplex
Discs of ductile iron shall have vulcanized, firmly bonded, 6 mm
stainless-steel shaft. The disc of the valve is ductile iron
thick(minimum), seamless lining of hard rubber or EPDM whichever
EN-GJS-500-7 with elastomer EPDM seat.
is most suitable for the flow medium.
5 Valves with discs of aluminum bronze or stainless steel shall have
Proposed butterfly valve are double eccentric type series
the inner face of valve body lined with suitable material, of sufficient
Comply 14 with Ductile iron disc 300 microns FBE coating,
thickness, highly resistant to mechanical stresses due to possible
Stainless steel 316 Retaining ring and EPDM lining/seat.
dragging of disc on the sealing seat during operation.
6 Liner shall be integral part of the body/disc and shall be durable for
the life of the valve. Valves with alternative coating or lining for the Comply
inner face of the body and disc may be acceptable on submission of
P a g e |1
DOCUMENT: COMPLIANCE STATEMENT
PROJECT NAME: R1105 - INTERCHANGES OF GARN AL SABKHA AND SH. MOHAMMED BIN ZAYED ROAD
PRODUCT DOUBLE ECCENTRIC BUTTERFLY VALVE PN16 RATING, SIZE: 800MM & 1000MM
Clause Comply/
Specification Remarks
No. Deviate
data sheets and all other documents, to the engineer, confirming the
suitability of the proposed coating material for the flow medium.
7
Disk shall be mounted on stainless steel shafts located in PTFE lined
Comply
self-lubricating bearings with synthetic nitrile rubber shaft seal.
8 The valve disc shall be generally double offset eccentric type fitted
with a non-ageing sealing element of EPDM (EPDM Profile Seal) or
similar approved material held in place by an adjustable one-piece
stainless steel clamping ring secured with Stainless Steel adjusting Comply
set screws mechanically locked in place (not resin bonded). The
profile seal shall provide a bi-directional tight shut off in accordance
with ISO 5208 Cat. A.
9 The valve disc shall be as streamlined as possible to ensure lowest
head losses and secure movement without disk flutter. Disc shall be
designed for optimum hydraulic flow pattern with negligible swirl Comply
and turbulence of water at two stub ends on opposite sides of the
disc.
10 The disc shall be designed to withstand maximum specified
differential pressure across the valve in either flow direction. The
Comply
valve shall be suitable for throttling operation. Valves shall be
suitable for downstream dismantling and dead-end-service.
11 Mill certificate records, for the body and the disc, detailing
mechanical properties, chemical composition etc. as per EN 10204 Mill test certificate EN10204 / 3.1 will be provided along
Noted
3.1B or any other approved international standard shall be with delivery of valves.
submitted with the valve.
P a g e |2
DOCUMENT: COMPLIANCE STATEMENT
PROJECT NAME: R1105 - INTERCHANGES OF GARN AL SABKHA AND SH. MOHAMMED BIN ZAYED ROAD
PRODUCT DOUBLE ECCENTRIC BUTTERFLY VALVE PN16 RATING, SIZE: 800MM & 1000MM
Clause Comply/
Specification Remarks
No. Deviate
12 The disc stub shafts shall be manufactured from Stainless Steel, and
positively keyed to the valve disk and incorporate a key securing
Proposed butterfly shaft is Duplex stainless steel which is
device (valve discs pinned to stub shafts are not acceptable). The Comply
superior than stainless steel.
shafts shall be designed to withstand the maximum torque that will
be imposed by the operator.
13
The stub shaft bearings shall be of maintenance-free self-lubricating
Comply
PTFE lined bushes, and shaft seals of EPDM or equivalent.
14 The epoxy coated valve gearbox shall be fitted with a sealed for life
maintenance-free travelling fork and nut gearbox, suitable for buried
service duty and capable of easy operation at full pressure
differential equal to nominal pressure, embossed in cast iron casing, Comply
grease packed, with ball thrust bearings coupled with hand wheel
and position indicator. Gear box enclosure shall be of protection
class IP67 minimum.
15 Travelling fork and nut gearboxes or slider crank gear boxes shall be
used depending on the size of the valve and according to the Comply
pressure rating.
16 Hand wheels / extension spindles foot brackets etc. Shall be
provided as standard wherever detailed. Headstock, if detailed, shall Comply
incorporate a valve position indicator
17 Body seat ring, if applicable, shall be replaceable and of stainless-
steel Grade 316. Clamping ring (retaining ring) for rubber profile Comply
seal for disc to be of Stainless Steel 316.
P a g e |3
DOCUMENT: COMPLIANCE STATEMENT
PROJECT NAME: R1105 - INTERCHANGES OF GARN AL SABKHA AND SH. MOHAMMED BIN ZAYED ROAD
PRODUCT DOUBLE ECCENTRIC BUTTERFLY VALVE PN16 RATING, SIZE: 800MM & 1000MM
Clause Comply/
Specification Remarks
No. Deviate
18 Proposed Butterfly valves are Double Eccentric type
PN16, Worm Gear Operated, Ductile iron Body, Ductile
Requirement of double eccentricity for disc shall be waived and iron disc, Shaft/stem-Duplex stainless steel, Seal SS316,
centered disc butterfly valve shall be acceptable under the following Noted Retaining Ring SS316. Valves Complying to EN 593, Face
conditions: to face Accordance to DIN 3202-1 F4 (EN 558-1, Series
14), Flange Type EN 1092-2, PN16, 300 Microns Fusion
Bonded Epoxy Coating Internally and Externally.
A. Disc shall be encapsulated in(firmly bonded) or vulcanized with
suitable abrasion resistant material of sufficient thickness or shall Proposed valves are Double eccentric type butterfly with
Not
be of stainless steel, duplex steel or aluminum bronze to an worn worm gearbox with Ductile iron Body, Ductile iron
Applicable
approved international standard and replaceable sealing ring is not disc, Shaft/stem-Duplex stainless steel.
required.
B. Body shall be lined (firmly bonded) or vulcanized with an
appropriate material and liner shall be an integral part of the body;
thickness of liner generally varying from a minimum of 8 mm to 20 Proposed valves are Double eccentric type butterfly with
Not
mm in disc sealing area and 6 mm to 15 mm in other noncritical worm gearbox with Ductile iron Body, Ductile iron disc,
Applicable
areas for valves of diameters varying from 100mm to 2000 mm. The Shaft/stem-Duplex stainless steel.
liner shall be thick enough in shaft sealing area to guarantee positive
sealing in all disc positions.
C. Body liner shall be highly resistant to mechanical stresses due to
Proposed butterfly valve with worm gearbox are double
possible dragging of disc on the sealing seat during operation. Body Not
eccentric type with Ductile iron disc, Stainless steel 316
liner shall be guaranteed for long service life without any Applicable
Retaining ring and EPDM lining/seat.
replacement
D.
Valve shaft (two-piece shaft) shall be inserted into the disc hubs for Proposed valves are Double eccentric type butterfly fly
Comply
a distance of at least 150% of the shaft diameter. with worm gearbox.
P a g e |4
DOCUMENT: COMPLIANCE STATEMENT
PROJECT NAME: R1105 - INTERCHANGES OF GARN AL SABKHA AND SH. MOHAMMED BIN ZAYED ROAD
PRODUCT DOUBLE ECCENTRIC BUTTERFLY VALVE PN16 RATING, SIZE: 800MM & 1000MM
Clause Comply/
Specification Remarks
No. Deviate
E.
There shall not be any contact of the pumping medium with the Proposed valves are Double eccentric type butterfly fly
Comply
valve shaft and shaft sealing shall be positive and long lasting. with worm gearbox.
F.
Proposed valves are Double eccentric type butterfly fly
Dismantling of shaft and disc shall be easy. Comply
with worm gearbox.
G.
Positive sealing (tight shut-off) with no leakage in either flow Proposed valves are tested in accordance with EN1074-1
Comply
direction shall be guaranteed. & 2 and test standard EN12266-1.
19 Protective coating shall be 300-micron DFT fusion bonded epoxy and
holiday- free, and application of coating to be at place of
manufacture. Construction bolts to be S.S.316 and shall not be Proposed Double Eccentric Butterfly valve with worm
painted. Transit/ installation damages of protective coating shall be gearbox are 300 Microns Fusion Bonded Epoxy Coating
Comply
made good using site repair pack supplied by the manufacturer. If Internally and Externally. Construction bolts are SS316
coating / lining on the inner face of the valve is found damaged the A4-70.
valve shall be rejected and no field repair of the inner face will be
allowed.
P a g e |5
PROJECT BOQ
PROJECT DRAWING
TECHNICAL DATA SHEETS
Part of the Radius Systems Group
The Flanged Double Eccentric Butterfly Valve has been developed in consultation with end-users and large utilities
to provide a seal tight valve.
Technical Details
Face to Face in accordance to:
DIN 3202-1 F4 (EN 558-1 Series 14)
Maximum Working Pressure PFA:
16 bar / PN16
Working temperature:
Maximum +90°C
Construction complies to:
EN 593 (DIN 3354)
Certification:
Hygienic Certificate PZH
Flange Type:
EN 1092-2 PN10 & PN16
Coating:
300 μm FBE coating, external and internal - RAL5015
Application:
Installation for water, potable water, irrigation water and other chemically inert fluids for flow closing
Design features
• High-grade materials for fully rated construction
• Sealing surface of body with additional overlay made of stainless steel
• All parts are protected against corrosion
• Executions with: mechanical, electric, pneumatic drive possibility
Group DN 600 700 750* 800 900 1000 1100 1200 1400 1500 1600 1800 2000
PN16 BB0459 BB0482 BB0484 BB0486 BB0488 BB0490 BB0492 BB0494 BB0627 BB0496 BB0498 BB0500
AW29/12 BB0640
PN10 BB0479 BB0481 BB0483 BB0485 BB0487 BB0489 BB0491 BB0493 BB0626 BB0495 BB0497 BB0499
L 390 430 450 470 510 550 550 630 710 600 790 870 950
B 451 526 540 581 643 722 710 840 950 1005 1100 1200 1300
H 987 1048 772 1097 1197 1273 1189 1484 1160 1240 1300 1400 1500
h 90 90 80 100 100 146 146 146 200 200 250 250 250
1025 / 1125 / 1255 / 1355 / 1485 / 1685 / 1820 / 1930 / 2130 / 2345 /
D PN16 / PN10 840 / 780 910 / 895 995
1015 1115 1230 1340 1455 1675 1785 1915 2115 2325
1170/ 1390/ 1710/
K PN16 / PN10 770 / 725 840 914,4 950 1050 1270 1590 1820 2020 2230
1160 1380 1700
37x20 / 37x24 / 41x24 / 41x28 / 44x28 / 44x32 / 50x32 / 50x36 / 50x36 / 56x40 / 56x44 / 62x48 /
b x n PN16 / PN10 35x28
31x20 31x24 34x24 34x28 37x28 37x32 41x32 44x36 44x36 50x40 50x44 50x48
s 55 65 65 70 80 92 92 100 130 130 160 180 180
d1 300 300 300 300 300 350 350 350 415 415 475 560 650
d2 254 254 254 254 254 298 298 298 356 356 406 483 590
d3 200 200 200 200 200 230 230 230 260 260 300 370 490
d4 x m 18x8 18x8 18x8 18x8 18x8 22x8 22x8 22x8 33x8 33x8 39x8 39x12 39x12
kxl 70x16x2 70x18x2 70x18x2 80x20x2 80x22x2 130x25x2 130x25x2 130x28x2 32x180x2 32x180x2 40x230x2 45x230x2 45x230x2
ISO 5211 F25 F25 F25 F25 F25 F30 F30 F30 F35 F35 F40 F48 -
Closing torque [Nm] 4550 6240 7020 7800 9750 15600 20000 23400 40000 50000 63000 85000 120000
MAST Value [Nm] 7150 12240 14800 23750 41600 41600 43400 82000 113000 185000 185000
Weight [kg] 393 483 515 613 800 1048 1325 1705 2800 3550 4260 5200 6150
* ANSI B16.5 CLASS 150
VALVE MANUFACTURER COMPANY PROFILE
Aeon Interna�onal Gulf LLC
AEON VALVES
CORPORATE
PROFILE
2021
www.aeonvalves.com
About
Radius Group
“
Radius Group is an international market leader in
engineered pipeline solutions for the gas, water,
wastewater, district heating and telecoms sector.
Employing over 7,000 skilled individuals. The
Group operates from 22 plants in the UK, Austria,
Radius Group is an Poland, Latvia and Russia and exports to more
international market leader than 50 countries worldwide.
water, wastewater, district of gases and fluids for water and gas pipeline
networks.
heating and telecoms
sector. As a part of the Radius Group, one of the largest
pipe manufacturers in the world, our financial
strength and stability enables us to invest in
innovation and new technologies.
www.aeonvalves.com
About us - Radius Systems | Aeon 02
History Timeline 04
Certification 05
Countries of Operation 06
Clients 07
Sector 08
Gate Valve 11
Butterfly Vavle 11
Check Valve 11
Strainer 12
Air Valve 12
Fittings 12
Gate Valve 11
Butterfly Vavle 11
Check Valve 11
History Timeline
AEON was founded in 1996 in the
United Kingdom by a team of
experienced Engineers from the Water
1996
and Gas Industry. Aeon Was established in the UK in 1996
and was re-structed in April 2007 to
create and develop the Aeon Group.
Production of water gate valves had 2000
started. Further operations were established in
2008 within the Middle East and Europe.
From 2013 the company AEON is part of
the holding Radius. these strategically
Production of Gas Valves had started. 2002 located operations enable Aeon to
sa sfy market requirements, via an
extensive distribution network in order
to support increasing demand.
Registered worldwide patents for dual
seal gate valves - Europe, Asia, 2004 Aeon's valve technology is a significant
including China and North America.
development in water and natural gas
conservation. Growing demand
combined with developing reserves
heightens awareness of the need to
AEON opens assembly & testing plant
for water and gas valves in Poland.
2007 reduce wastage. Aeon sees an increasing
-
role for its products in both the developed
and developing world.
This is to certi
fy that: Radius Systems Limited
This is to certify that the Quality Management Syst
em of Radius House
Berristow Lane
03
Unit 10 Evans Business Centre, Ling eld Way, Darli ngton, DL1 4Q7
Powstancow Wielkopoliskich 97 64-500 Szamotuly, Poland
P.O Box 115069, Dubai Investment Park, Dubai United Arab Emirates EMS 507217
Has been assessed and registered as meeting the req
uirements of and operates an Environmental ManagementSystem which complies with therequirements of ISO 14001:2004
for
the following scope:
BS EN ISO 9001: 2008 nvironmental aspects associated with the manu facture of
polyeth ttings for gas andwater applications, and the design,rocurement,
p
Permissible Exclusions: None assembly, test, sales & mar
keting of valves in accordance with Radius Systems Ltd's publicly
available environmental policy. Activities include the management of energy, waste and
Scope of Approval: resource aspects.
Design, Procurement, Assembly, Test, Sales and Mark eting of Valves
PED 2014/68/EU
Gary Fenton, Global Assu
rance Director
Page: 1 of 2
BSI Assu
rance UK Limited,registered in England under number 7805321 at 389 Chiswick High
Road, London W4 4AL, UK.
06 CE Mark
07 WRAS Approved
08 INIG
09 KIWA-GASTEC
Version MAR-2020-01 04
Countries of Operation
Aeon | Radius Systems
Customer base
Aeon International UK is BSI Kitemark and ISO approved, and has a developing customer base and several
appointed distributors across the UK, Ireland, and continental Europe supplying to the Water and Gas sectors.
Aeon International Europe is in Szamotuly, Poland. Strategically situated to service the Eastern Europe
market, possessing a strong customer base in region. Aeon International Gulf is strategically located in Dubai
– UAE allowing the company to effectively service their customer base in the Gulf and Middle East. Agents
have been appointed for the Water & Gas sector throughout the Middle East
We’ve been devoting our hearts and minds to our clients, achieving great successes and building
relationships .
Version MAR-2020-01 06
Aeon Sectors
unique range of OptiValveTM and OptiValve PlusTM, specially designed with an exclusive patented twin seal
Potable Water
Aeon's wide range of valves offers robust valve solutions, specifically designed to
provide maximum leak tightness and long service life. Our range of Ecovalve,
Optivalve and OptiValve Plus are state of the art valve designs that can cater and
are safe for all your potable water pipeline requirements. They are complemented
by a range of accessories, ancillaries and fittings that fit your pipeline for
maximum integrity and smooth operation of your potable water network
Irrigation
A wide range of air valves and butterfly valves specially
constructed for district heating and cooling applications.
High performance and quality components are used in the
design of our valves to ensure ease of operation and
reliability and durability in service.gas pipeline require-
ments.
Fire Protection
Specifically designed for reliability, high performance and
quality for challenging environments, our valve and hydrant
offering are UL/ULC listed and FM approved for complete
confidence of a robust and safe solution for fire protection
and sprinkler systems applications.
Wastewater
Our range of versatile valves for wastewater applications have been
specifically designed for maximum leak tightness and long service
life. Specially constructed to provide robustness and corrosion resist-
ance during service, our valves are complemented by a range of
accessories, ancillaries and fittings that fit your pipeline for
maximum integrity and smooth operation of your wastewater
pipeline network.
Product Range
for Water
Water Products
01
Gate Valve
DN50 - DN1600
Our range of gate valves with exceptional features and
characteristics, in compliance with international standards.
GATE VALVE WITH GEAR BOX | GATE VALVE WITH SPUR GEAR OR BEVEL GEAR
02
Butterfly Valve
DN50 - DN2000
It is available with various disc and seat materials for a wide range of
applications. It should be installed with its shaft horizontal, lower edge of
the disc opening downstream.
LUG BUTTERFLY VALVE| WAFER BUTTERFLY VALVE | DOUBLE ECCENTRIC BUTTERFLY VALVE
03
Check Valve
DN50 - DN800
The Swing Check Valve is a conventional single disc valve that is perfectly
suited for low velocities piping systems. By using weight, slamming can
be greatly reduced where required.
CHECK VALVE | HYDRAULIC DAMPER | FLEXI CHECK VALVE | DUAL PLATE CHECK VALVE
Version MAR-2020-01 10
Water Products
04
Strainers
DN50 - DN600
The Basket strainer will screen and collect scale, rust, debris, in a large
basket-shaped screen ideal for applications on heavily laden fluids. while
Y-Strainer is used to strain dirt particles from fluid in pipelines and
provide inexpensive protection for costly pumps, meters, valves, traps,
turbines and compressors.
05
Air Valves
DN50 - DN200
Air Valve will ensure the correct operation of the pipeline networks
allowing the release of the air pockets during working conditions, the
evacuation and the entrance of large volumes of air in case of filling and
draining operations.
SINGLE ORIFICE AIR VALVE | DOUBLE ORIFICE AIR VALVE | COMBINATION AIR VALVE
06
Fittings
DN50 - DN2000
and end users during the installation and the life of the valve.
Pressure Reducing
Meterings
Station
Our state of the art range of gate valves, OptiValve and OptiValve Plus are internally and externally [protected with a minimum epoxy coating thickness
of 250 microns for optimum corrosion resistance. Aeon valves are approved to the toughest international standards for gas applications and are supplied
with a traceability barcode, to maximise visibility within the supply chain.
Reducing and
Metering stations
for Natural Gas
• Low, Medium and High Pressure
Version MAR-2020-01 14
Patented low friction seat design
Seat contact occurs at about 90% of travel. The applied torque increase
no leakage
long-term durability
minimal maintenance.
PRODUCT FOR
GAS UTILITIES
Special coating – PUR
Version MAR-2020-01 16
t
for Firefigh�ng
Protec�on
FIRE PROTECTION SUPPLY
FM Approved &
Vertical indicator wall post
Swing Check Valve - Flanged ends your safety under the most hazardous
Swing check valve - Grooved ends circumstances.
Version MAR-2020-01 18
Aeon Interna onal Gulf LLc
Get in touch.
02
Main Tile Goes here
Subtitle Goes here
Aeon International Gulf LLC
Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam
Phone:nonummy
+971 4 885 nibh euismod tincidunt ut laoreet dolore magna aliquam
9225
erat 4volutpat.
Fax: +971 885 9224 Ut wisi enim ad minim veniam, quis nostrud exerci tation
Email: ullamcorper
info.me@aeon-online.com
suscipit
64-500 Szamotuly
United Kingdom ul.Powstancow Wielkopolskich 97, Poland
Phone: +44 (0) 1325 621178 Phone: +48 61 2932 307
Fax: +44 (0) 1325 621179 Fax: +48 61 2932 375
Email: info.uk@aeon-online.com Email: info.eu@aeon-online.com
GEARBOX MANUFACTURER COMPANY PROFILE
COMPANY OVERVIEW
For more than 3 decades since founded in 1987,
we have been specializing in the manufacture of Actuators for valve automation
Brief history
General
1987 : Company established
C.E.O. : Kiwon Chang
1991 : Selected as Korea Electric Power Corporation supplier
Established : May 16, 1987
HQ & Factory : in Yeoju city 1991 : Technical License Agreement with Seibu Electric &
Machinery Co. Ltd., Japan
Sales office : in Seoul
1998 : Launched TM-series for multi-turn valves
Paid in capital : US$3.5Million
Turnover : US$24 Mil. in 2018 (11,000 units) 2003 : ‘Class 1E’ approved for LTMD actuator from Korea
Hydro & Nuclear Power Co., Ltd.
Staff : 105 people
2006 : Listed in Korea Stock Market (KOSDAQ)
Production capacity : 30,000 units per year
Domestic / Global agencies : 21 / 20 2013 : Obtained Explosion proof for “FM” ,”CSA” and “ATEX”
Main product : Electric actuator, Gear boxes 2015 : Obtained “SIL”, “TR CU” Certification
Factory area : Land 17,025㎡ & Building 6,837㎡
2017 : Open Dubai Branch Office
Branch office: M/s Enertork Middle East, Dubai, UAE
2018 : Open Branch Factory ‘ENVACO’ in Vietnam
2
COMPANY NETWORK
3
PRODUCT LINE-UP
Living up to global market requirement for the Intelligent type, we have launched
TM-Smart & TQ-Smart and additionally will bring out a new intelligent type TX-series
TM-series
for multi-turn valves such as
Gate valve, Globe valve A new TX series
Max torque (30~ 16,000Nm)
Basic Type, Integral type
Intelligent type (TM-Smart)
TQ-series
for quarter-turn valves such as
Butterfly, Ball valve
Max torque (30~ 3,000Nm)
Basic Type, Integral type The Intelligent type :
Intelligent type (TQ-Smart) Non-intrusive setting - no cover
removal required using
Gear Reducer Box
Reduction gear boxes hand-held kit
Bevel / Worm / 2nd,3rd gears
Manual / Flange type
Data logging
Diagnostics
LTMD
for Nuclear power plant
Max torque (30~16,000Nm)
4
CERTIFICATION
The enclosure is rated for immersion to IP 68 – completely water & dust tight and
explosion proof to be used reliably in the hazardous environmental area.
5
Customers and Registration
Korea Gas Corp. Saudi Arabia Ras Al Khair Power & Desalination plant
Korea National Oil Corp.
S-Oil / SK Aramco Marafiq Water storage facilities
Petrochemical
Kuwait KNPC Morocco Jorf Lasfar thermal power plant 5&6
Oil & Gas
UAE ADNOC
Iran NIGC(MOP) Papua New Guinea AVIATION FUEL FARM
UAE Al Khaleej Sugar Iran Mapna 4 boiler & 42 HRSG project
South Par Gas Field 13 & 14
EVN
Korea Electric Power Corp. Libya Al Nahr- Great man-made river project
Power plant Korea Hydro & Nuclear Power
UAE Baraka Nuclear power plant
Iranian Mapna boiler
UAE DEWA Al Khaleej Sugar Processing Line Expansion
Vietnam Mongduong II thermal power plant
K water
Saudi Arabia SWCC Philippines Cebu coal fired power plant
Waterworks Turkey ISKI
Pagbilao CFPP Unit3
UAE ADSSC
Oman HAYA Indonesia Cirebon coal fired power plant
7
CERTIFICATES
8
CERTIFICATES
9
FACTORY VIEWS
FACTORY VIEWS
PICTURES OF REFERENCES
12
PICTURES OF REFERENCES
Thank you for your attention
14
TRADE LICENSE
رخصة تجارية
Commercial License
License Details / تفاصيل الرخصة
License No. 884893 رقم الرخصة
Legal Type Limited Liability Company(LLC) ذات مسئولية محدودة الشكل القانونى
Expiry Date 28/04/2024 تاريخ النتهاء Issue Date 29/04/2020 تاريخ الصدار
D&B D-U-N-S ® 0 الرقم العالمي Main License No. 884893 رقم الرخصة الم
No.
Register No. 1490877 رقم السجل التجارى DCCI No. 338379 عضوية الغرفة
بور سعيد-ديره- "م.م.ذ. ملك مجموعه سلطان للستثمار " ش-815 مكتب رقم
Print Date 01/05/2023 15:04 تاريخ الطباعة Receipt No. 14973924 رقم اليصال
اتصالت( للحصول/ )دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
.على اذن الدفع Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message (SMS). Send your trade year
license number to 6969 (Du/ Etisalat) to receive payment voucher. احصل على زوهو ون مجانا ت
للسنة الولى
Zoho.com/det
لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي
this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to
Verify the certificate
Remarks / الملحظات
29/04/2022 تم اضافه شريك و اضافه مدير في تاريخ
Print Date 01/05/2023 15:04 تاريخ الطباعة Receipt No. 14973924 رقم اليصال
اتصالت( للحصول/ )دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
.على اذن الدفع Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message (SMS). Send your trade year
license number to 6969 (Du/ Etisalat) to receive payment voucher. احصل على زوهو ون مجانا ت
للسنة الولى
Zoho.com/det
لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي
this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to
Verify the certificate
ملحق الشركاء
Partners
License Details / تفاصيل الرخصة
1.0000000% 649124 المارات/ United Arab Emirates عمر لل/ Omar Lal Mohd Saheb Dad Raisi Alblooshi
محمد صاحب داد رئيسى البلوشى
Print Date 01/05/2023 15:04 تاريخ الطباعة Receipt No. 14973924 رقم اليصال
اتصالت( للحصول/ )دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
.على اذن الدفع Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message (SMS). Send your trade year
license number to 6969 (Du/ Etisalat) to receive payment voucher. احصل على زوهو ون مجانا ت
للسنة الولى
Zoho.com/det
لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي
this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to
Verify the certificate
شهادة شهر قيد شركة فى السجل التجارى
Commercial Register
Register Details / تفاصيل القــيد
Main Lice. Nr 884893 رقم الرخصة المRegister No. 1490877 رقم القيد
بور سعيد-ديره- "م.م.ذ. ملك مجموعه سلطان للستثمار " ش-815 مكتب رقم
Register Activities / أنشطة السجل
Building Hardware & Tools Trading تجارة عدد وادوات البناء
Building & Construction Materials Trading تجارة مواد البناء
Cement & Gypsum Trading تجارة السمنت والجبس
Tiles & Flooring Materials Trading تجارة البلط والرضيات
Tanks & Silos Trading تجارة الخزانات والصهاريج والصوامع
Pipes & Fittings Trading تجارة النابيب والمواسير
Building & Construction Materials Wholesale Trading تجارة مواد البناء بالجملة
Insulation & Protection Materials Trading تجارة المواد العازلة والواقية
Print Date 01/05/2023 15:04 تاريخ الطباعة Receipt No. 14973924 رقم اليصال
اتصالت( للحصول/ )دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
.على اذن الدفع Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message (SMS). Send your trade year
license number to 6969 (Du/ Etisalat) to receive payment voucher. احصل على زوهو ون مجانا ت
للسنة الولى
Zoho.com/det
لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي
this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to
Verify the certificate
License no. 884893 884893 رقم الرخصة
Trade Name IMECH BUILDING م.م.ذ.ايميك لتجارة مواد البناء ش السم التجاري
MATERIALS TRADING L.L.C
Legal Status Limited Liability Company(LLC) ذات مسئولية محدودة الشكل القانوني
Activity Building Hardware & Tools Trading تجارة عدد وادوات البناء نوع النشاط
Building & Construction Materials تجارة مواد البناء
Trading تجارة السمنت والجبس
Cement & Gypsum Trading تجارة البلط والرضيات
Tiles & Flooring Materials Trading تجارة الخزانات والصهاريج والصوامع
Tanks & Silos Trading تجارة النابيب والمواسير
Pipes & Fittings Trading تجارة مواد البناء بالجملة
Building & Construction Materials تجارة المواد العازلة والواقية
Wholesale Trading
Insulation & Protection Materials
Trading
Whereas, IMECH BUILDING MATERIALS TRADING LLC is appointed by AEON INTERNATIONAL GULF
L.L.C as distributor in United Arab Emirates for AEON products manufactured in Poland.
Therefore, it has been agreed and conditioned between the parties as follows:
1. AEON hereby appoints IMECH as its one of the Distributor for the term of this agreement for the sale
and distribution of AEON Products in and throughout the territory.
2. AEON is appointing IMECH as distributor hereunder with respect to the sale of products to responsible
purchasers whose principal place of business is located in the following described as territory (the
“Territory”): United Arab Emirates.
3. AEON and IMECH set a goal of minimum sales at the beginning of each year. The distributor shall use its
best efforts to promote the sale and distribution of AEON products to the maximum number of responsible
customers in the territory.
4. The prices of the goods will be in accordance with the price list and the price quotations for special
enquiries issued by AEON from time to time.
5. Payments shall be made by IMECH in accordance with the offers and/or order acknowledgements. The
payment terms will be mutually agreed at the time of order confirmation and the same will be made
through irrevocable confirmed letter of credit acceptable to the AEON.
6. This contract and agreement shall be constructed and governed according to the International Trade
Laws.
7. Any of the parties may without prejudice and for any reason terminate this agreement by written notice
on the other party. The period of notice should not be less than two months.
8. AEON undertakes to provide the warranty obligations of the products sold by IMECH. Notwithstanding
any other provisions of this contract, this clause shall survive the expiration or termination of this contract.
In witness thereof, the parties have set their signatures this 11 March, 2021 and have hereby caused this
agreement to be executed.
We, AEON, manufacturer of Valves, Fittings and Accessories hereby authorize IMECH
BUILDING MATERIALS TRADING LLC as our distributor to promote, negotiate,
tender, sell, exhibit and responsible for the after sales service on behalf of AEON in the
whole territory of UAE for sale of our products.
Yours sincerely,
For Aeon International Gulf LLC
Ref no : AL-CS021/21
Date : 11/03/2021
G
7R ZKRP LW PD\ FRQFHUQ
'RF5HIQR(17.0(
'HDU 6LU
:H
(QHUWRUN $FWXDWRUV LV D \HDUV ROG JOREDOO\ UHSXWHG 6RXWK .RUHDQ PDQXIDFWXUHU
RI KLJKTXDOLW\
(OHFWULF DFWXDWRUV
*HDUER[HV
IRU DOO W\SHV
RI YDOYHV
SHQVWRFN
GDPSHUV
:H KHUHE\ FRQILUP WKDW RXU SURGXFWV ZLOO EH VXSSOLHGWKURXJK ,0(&+ %XLOGLQJ 0DWHULDO
7UDGLQJ
//& EDVHG DW 8$(
<RXUV 6LQFHUHO\
0XKDPPHG$VKLN
6DOHV 0DUNHWLQJ0DQDJHU±0(1$UHJLRQ
(QHUWRUN$FWXDWRUV
COUNTRY OF ORIGIN
SA
M
PL
E
ISO CERTIFICATE
Certificate of Registration
QUALITY MANAGEMENT SYSTEM - ISO 9001:2015
Page: 1 of 2
This certificate was issued electronically and remains the property of BSI and is bound by the conditions of contract.
An electronic certificate can be authenticated online.
Printed copies can be validated at www.bsigroup.com/ClientDirectory
Information and contacts: BSI Group Italia srl, via Fara 35, Milano, Italy, phone: +39 02 6679091
A Member of the BSI Group of Companies.
Certificate No: FS 710243
AEON International (Europe) Sp. z o.o. Design, procurement, assembly, test, sales and marketing of
ul. Powstancow Wielkopolskich 97 valves.
Szamotuly
64-500
Poland
Aeon International Gulf LLC Procurement, assembly, test, sales and marketing of valves.
LLC Warehouse 5,1146/598
Dubai Investment Park
Dubai
115069
United Arab Emirates
Page: 2 of 2
This certificate was issued electronically and remains the property of BSI and is bound by the conditions of contract.
An electronic certificate can be authenticated online.
Printed copies can be validated at www.bsigroup.com/ClientDirectory
Information and contacts: BSI Group Italia srl, via Fara 35, Milano, Italy, phone: +39 02 6679091
A Member of the BSI Group of Companies.
MANAGEMENT SYSTEM
CERTIFICATE
Certificate no.: Initial certification date: Valid:
0184-1997-AQ-KOR-KAB 28 October 1997 29 October 2021 – 28 October 2024
ENERTORK LTD.
344, Neungyeo-ro, Neungseo-myeon, Yeoju-si, Gyeonggi-do, 12646, Korea
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
DNV Business Assurance Korea Ltd is accredited by Korea Accreditation Board (KAB) as a Quality Management System certification body (Accreditation number: KAB-QC-10).
ACCREDITED UNIT: DNV Business Assurance Korea Ltd., 18F Kyobo Bldg., 1 Jong-ro, Jongno-gu, Seoul, Republic of Korea - TEL: +82 2 724 8413. dnv.kr/assurance
TEST CERTIFICATES
SA
M
PL
E
DRAFT WARRANTY CERTIFICATE
WARRANTY CERTIFICATE
PRODUCT NAME : As per purchase order
MANUFACTURER : Aeon International
DATE OF WARRANTY : Aeon confirms warranty for a period of 5 years from the date of TOC
DURATION OF WARRANTY : 5 years
WARRANTY COVERAGE : Metal Body parts
AEON INTERNATIONAL hereby confirms warranty for a period of 5 years on the valve metal body parts
from the date of TOC. This warranty shall only be valid if the product is installed correctly in accordance with
the Aeon installation instructions and accepted codes of good practices. Exceptions to this guarantee are
expendable parts and shall be invalidated if, at any time, the product is used for an application which has
E
not been recommended by Aeon, as if it has been subject to incorrect maintenance or mishandling. During
the warranty period, the repair may also be carried out in Aeon facility in Dubai.
PL
AEON INTERNATIONAL is not responsible for any alteration in operating the valves with gearbox resulted
fromusing Non recommended extension spindles or (T)Keys.
As per AEON INTERNATIONAL WARRANTY It is mandatory to use valve (open\close) indicator to direct
operator, if indicator is not used, it will be considered a violation to manufacturer instructions manual &
warranty will be revoked.
M
Aeon shall under no circumstances accept claims for third party liability or damage caused by the failure of
any of the company’s products. Aeon shall accept no liability for product failure caused by abnormal
storage before commissioning and operational conditions or not complying operational fluids. The decision
SA
This warranty is provided by Aeon International under the conditions set above
PROJECT: R1105 - INTERCHANGES OF GARN AL SABKHA AND SH. MOHAMMED BIN ZAYED ROAD
CLINET: ROAD AND TRANSPORT AUTHORITY (RTA)
CONSULTANT: KHATIB & ALAMI
MAIN CONTRACTOR: CHINA STATE CONSTRUCTION ENGINEERING CORPORATION MIDDLE EAST
SUB CONTRACTOR: ARAR INFRA CONTRACTING CO LLC
1 | A I G - 2022 - 0 000
PROJECT REFERENCE LIST
IMECH PROJECT REFERENCE LIST
1 DS 220 HOUSE CONNECTION AND MISCELLANIOUS DUBAI MUNICIPALITY CROWN CONSULTANT NCC
WORKS
2 DUBAI INTERNATIONAL AIRPORT EXPANSION DAEP DAR CONSULTANT BERG INTERNATIONAL
3 PARK RIDGE - DUBAI HILLS ESTATE EMAAR DESERT LNK GULF LANDSCAPING
4 AL DHARFA FIRE MAIN PIPE EXTENSION CMW NIL AL REEF PROJECTS LLC
7 THE ROYAL ATLANTIS RESORTS AND RESIDENCE (TRA) THE ROYAL ATLANTIS DEC PROSCAPE
IMECH PROJECT REFERENCE LIST
11 IR209 IRRIGATION SYSTEM FOR DXB PARKS ENTRANCE DUBAI MUNICIPALITY PARSONS PROSCAPE
FROM SZ ROAD
12 DMS – 147024 – PREMIER INN SEWERAGE NETWORK NAKHEEL ARIF AND BIN TOAK KTC INTERNATIONAL
14 P42 UMM RAMOOL DEVELOPMENT DUBAI COMMER CITY P & T ARCHITECTS AND AROMA
ENGINEERS LTD INTERNATIONAL/PROSCAPE
15 DOWN TOWN VIEW 11 EMAAR ARCHGROUP CHINA STATE/PROSCAPE
22 ACCESS ROAD AND SITE DEVELOPMENT MODON PROPERTIES SALFO GULF LANDSCAPE
24 DUBAI HILLS ESTATE RTA INTERFACE- BUFFER ZONE EMAAR KEO GULF LANDSCAPE
30 CONSTRUCTION OF 291 VILLAS JGE-JLL-A-01 JUMEIRAH LUXURY AL TURATH CITY FORT CONTRACTING
JUMEIRAH GOLF ESTATE ENGINEERING LLC
31 MBR CITY PARK RIDGE PHASE 1 J-735 EMAAR KEO GULF LANDSCAPE
32 IR 149 IRRIGATION SYSTEM FOR INTERCHANGE OF DUBAI MUNICIPALITY PARSONS ZAID AL HUSSAIN
SHEIKH ZAYED ROAD WITH JABAL ALI LEHBAB ROAD
33 TAPPING POINT INSTALLATION WORKS IN TOWN DESERT LANDSCAPE
SQUARE.
34 RICE PLANTATION FIELD 2-PHASE 4 AL MARMOON- DESERT LANDSCAPE
IRRIGATION WORKS
35 UAE NATIONAL PAVILION, EXPO-LANDSCAPE WORKS PROSCAPE
37 SHARJAH WATER FRONT CITY-SUN ISLAND STAR DEVELOPMENT WSP AL HANOO BUILDING
CO. CONTRACTING LLC
38 SAMA TOWN HOUSES J-750 GULF LANDSCAPE
IMECH PROJECT REFERENCE LIST
42 THE ROYAL ATLANTIS RESORTS & RESIDENCES THE ROYAL ATLANTIS PROSCAPE
61 SUPPLY OF DN 200MM DUCTILE IRON PIPE FOR PAEW DUTCO TENNANT LLC
SOHAR PROJECT, OMAN.
62 RELOCATION OF DN 300MM DI WATER PIPELINE ABU DHABI DISTRIBUTION OTAK INTL. FALCON MIDDLE EAST LLC
IN E11, PLOT C23, ABU DHABI. COMPANY (ADDC)
63 RELOCATION OF DN 300MM DI WATER PIPELINE ABU DHABI DISTRIBUTION OTAK INTL. FALCON MIDDLE EAST LLC
IN E18 -02 PLOT C59, ABU DHABI. COMPANY (ADDC)
64 QASR AL SARAB DESERT RESORT ROAD, ABU ABU DHABI DISTRIBUTION OTAK INTL. AL MAIDANA GENERAL
DHABI COMPANY (ADDC) CONRACTING &
MAINTENANCE LLC
65 IRRIGATION LINE AT MUSSAFFAH, ABU DHABI ABU DHABI MUNCIPALITY(ADM) DUTCO TENENANT LLC
66 PUMP ROOM AT LIWA, ABU DHABI ABU DHABI WATER AND JSS PIPE AND FITTINGS
ELECTRICITY TRADING LLC
AUTHORITY(ADWEA)
67 CELEBRATION PLAZA – AL SHAMKHA, ABU ABU DHABI OTAK INTL. BASATING LANDSCAPING
DHABI. MUNCIPALITY(ADM) LLC
68 CELEBRATION PLAZA – AL RAHBA, ABU DHABI. ABU DHABI OTAK INTL. BASATING LANDSCAPING
MUNCIPALITY(ADM) LLC
69 INFRASTRUCTURE AND BUILDING WORKS ABU DHABI HOUSING KHATIB & ALAMI NAEL GENERAL
CONSTRUCTION, AL WATHBA NORTH, NORTH AUTHORITY CONTRACTING GROUP
NEW AND SOUTH, ABU DHABI.
70 WATER SUPPLY TO VIP PREMISES IN MIRFA, ABU ABU DHABI DISTRIBUTION OTAK INTL. AL REEF PROJECT LLC
DHABI COMPANY (ADDC)
71 PR 026 DUBAI PARK DUBAI MUNCIPALITY(DM) DX CONTRACTING LLC
96 QIDFA REVITALIZATION STROM WATER LIFTING STATION, EMIRATES COUNCIL FOR STUDIO INTERNATIONAL KINDEN CORPORATION
FUJAIRAH RURAL DEVELOPMENT ENGINEERING
CONSULTANTS
97 TILAL AL GHAF- 2 CLUSTERS HARMONY 3 MAJID AL FUTTAIM PARSONS OVERSEAS MIDDLE EAST GROUP OF
LIMITED COMPANIES
98 MINA ZAYED FISHERMAN’S WHARF PHASE 1B, ABU MODON PROPERTIES DAR AL-HANDASAH GULF CONTRACTING &
DHABI, UAE PJSC LANDSCAPING LLC
99 CONSTRUCTION OF ROADS AND IFRASTRUCTURE WORKS ABU DHABI POLICE GHQ DORSCH GRUPPE DC ABU NAEL & BIN HARMAL
AT AL HAFFAR POLICE TRAINING CITY ABU DHABI DHABI HYDROEXPORT LLC
100 T-SM-SRC-IT-MD01-C-01-22 – FLUSHING FOR EXTERNAL TABREED TABREED STEEL CONSTRUCTION
CHW PIPING NETWORK – PRIMARY ENGINEERING COMPANY LLC
101 ABUDHABI ISLAND AT GRADE CYCLE NETWORK ALDAR PROJECTS PARSONS FALCON MIDDLE EAST
104 DESIGN AND SUPERVISION OF BLOWDOWN PIPE EMPOWER ENERGY CDM SMITH HILLS & FORT CONSTRUCTION
NETWORK BETWEEN DUBAI INTERNATIONAL FINANCIAL SOLUTIONS L.L.C
CENTRE (DIFC) PLANT AND DM SEWAGE DISCHARGE
POINT
105 DUBAI WASTE MANAGEMENT CENTER DUBAI MUNICIPALITY HITACHI ZOSEN INOVA KINDEN CORPORATION
& BELHASA SIX
CONSTRUCT LLC.
CONSORTIUM
106 KUWAIT STREET CONNECTION AT DMC – MINA DUBAI MARITIME CITY PARSONS OVERSEAS SIMI CONTRACTING LLC
RASHID, DUBAI, UAE LLC LIMITED
107 TR370- TREATED SEWAGE EFFLUENT (TSE) NETWORK EMPOWER CDM SMITH DETECH CONTRACTING LLC
CONNECTION TO BB2 AND BB5 DISTRICT COOLING
PLANT
108 AL BAHYA FARM HOUSE VILLA – PROPERTY NO. 1246105 YOSH DEVELOPMENT EGIS EMIRATES ASQALAN CONSTRUCTION &
LLC PROJECT DEVELOPMENT LLC
MANAGEMENT
109 IN111 UPGRADATION AND MODIFICATION OF EXISTING PARSONS DUBAI MUNICIPALITY DETECH CONTRACTING LLC
PUMP STATION (IRRIGATION MAIN NETWORK)
PREVIOUS PROJECT APPROVALS
اﻟﻤﺮﺟﻊ DM042022-1583766: اﻟﺘﺎﻳﺦ 12/05/2022:
ً
ﺑﺪاﻳﺔ أﻃﻴﺐ اﻟﺘﺤﻴﺎت ،وﻧﻮد اﻹﺷﺎرة إ اﻟﻤﻮﺿﻮع اﻟﻤﺬﻛﻮر أﻋﻼه ،ﻧﻔﻴﺪﻛﻢ ﺑﺄﻧﻪ ﻻ ﻣﺎﻧﻊ ﻟﺪﻳﻨﺎ ﻧﻬﺪﻳﻜﻢ
ﻣﻦ اﻋﺘﻤﺎد ﺷﺮﻛﺘﻜﻢ اﻳﻤﻴﻚ ﻟﺘﺠﺎرة ﻣﻮاد اﻟﺒﻨﺎء ش.ذ.م.مIMECH Building Materials Trading“
”LLCﻛﻤﻮرد ﻟﺼﻤﺎﻣﺎت ووﺻﻼت اﻷﻧﺎﺑﻴﺐ اﻟﻤﺮﻧﺔ ﻣﻦ اﻧﺘﺎج ﺷﺮﻛﺔ اﻳﻮن اﻧﺘﺮﻧﺎﺷﻴﻮﻧﺎل )ﺟﻠﻒ(
ش.ذ.م.م “ ”AEON INTERNATIONAL (GULF) LLCوذﻟﻚ ﻣﺸﺎﻳﻊ اﻟﺼﺮف اﻟﺼﺤﻲ ﻋﻠﻰ
أن ﺗﻜﻮن ﻣﺘﻮاﻓﻘﺔ ﻣﻊ ﻣﻮاﺻﻔﺎت وﻣﺘﻄﻠﺒﺎت ﺑﻠﺪﻳﺔ د وﺣﺴﺐ اﻻﺣﺘﻴﺎﺟﺎت اﻟﻔﻨﻴﺔ ﻟﻠﻤﺸﺎﻳﻊ ﻋﻠﻤﺎ ً
ﺑﺄن ﻫﺬه اﻟﻤﻮاﻓﻘﺔ ﺳﺘﻜﻮن ﺳﺎﻳﺔ ﻟﻤﺪة ﻋﺎم ﻓﻘﻂ ﻗﺎﺑﻠﺔ ﻟﻠﺘﺠﺪﻳﺪ ﺣﺎل اﺳﺘﻴﻔﺎء ﻛﻞ اﻟﺸﺮوط
اﻟﻤﻄﻠﻮﺑﺔ.
ﻧﺴﺨﺔ إ:
PROJECT : Entry Junction Modification and Utilities Tie in for Marsa Al Arab Development
CLIENT : M/s. Marsa Al Arab
DEPARTMENT : AGRICULTURE & IRRIGATION DEPARTMENT
PROJECT MANAGEMENT : M/s. North25
CONSULTANT : M/s. Hills & Fort Construction L.L.C
CONTRACTOR
SL
NO.
MS No. DESCRIPTION MANUFACTURER / BRAND MODEL NO. LOCAL SUPPLIER PREVIOUS APPROVED PROJECT MATERIAL APPROVAL LIST PREVIOUS APPROVED DATE DM COMMENT STATUS REMARKS
IR156-IRRIGATION SYSTEM FOR comply with DM specification and standard. Subject to communication must be MODBUS RS 485.
calibration test report to be provided along
ELECTROMAGNETIC FLOWMETER, MUT2200 EL INTERCHANGE OF SH.MOHAMMAD shop drawing approval by DM-HID. Irrigation work should approved as
4 89 M/s. EUROMAG, ITALY MC608 M/s IMECH LLC with origin & warranty certificate upon
+ MC608A FOR IRRIGATION NETWORK (200MM) BIN SAYED ROAD WITH AMMAN be executed by approved DM irrigation contractor only & noted delivery. Brand name must be embossed on the
ROAD within their approved project limit. body & must be visible once installed.
3 August 2022
PROJECT :
CLIENT : EMAAR
DEPARTMENT : AGRICULTURE & IRRIGATION DEPARTMENT
CONSULTANT : KEO
CONTRACTOR : ALNASR CONTRACTING CO.LLC
SL NO. DESCRIPTION MAT Sub. Ref MANUFACTURER / BRAND MODEL NO. LOCAL SUPPLIER PREVIOUS APPROVED PROJECT MATERIAL APPROVAL LIST PREVIOUS APPROVED DATE DM COMMENT STATUS REMARKS
Pressure Transmitter for irrigation network AR3-ALNASR- Cerabar M Construction of DCP please refer to the guidelines for RTU panel and
2 Endress+Hauser, Germany Endress & Hauser, Dubai MAR-009 Sunday, April 14, 2019
KEO-MAT-009 PMC51 for DWTC electrical components.
AR3-ALNASR- Ravco International General please refer to the guidelines for RTU panel and
3 Earthing materials for Field RTU for Irrigation network Kingsmill Industries, UK Akoya oxygen Phase-7 MAR-0957 Thursday, August 19, 2021
KEO-MAT-051 Trading LLC, UAE electrical components.
* Approval issued for AEON valves with gear are for this project only and cannot
29 August 2021 be refer to any other project due to valve gear issue which will be inspected
and observe once installed.
* All above comments and remarks must be complied otherwise
this approval is not valid.
* This approval thus not relieve the consultant and contractor
the responsibility in case of product failure.
OPEN DATA / ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ Page 1 of 1
PARIKSHITH ABHIMANNU <parikshith@imechuae.com>
RE: [WARNING : MESSAGE ENCRYPTED]REQUEST FOR APPROVAL CONFIRMATION/AUTHORIZATION TO REFER AEON PRODUCTS IN FUTURE PROJECTS - [SHARED – CONFIDENTIAL /
]مشترك – خاص
1 message
Classification:
SHARED – CONFIDENTIAL /
مشترك – خاص
Please consider this email as confirmation to use the below projects as reference.
Note that no AEON product must be delivered or installed without DM approval and complying with DM specification & standard on any proposal related to irrigation
project.
PROJECT - ARABIAN RANCHES 3 PHASE-1 EXTERNAL SEWERAGE AND TSE CONNECTIONS - LOA6610
Approval issued for AEON valves with gear are for this project only and
CLIENT - EMAAR
1 cannot be refer to any other project due to valve gear issue which will be
CONSULTANT - KEO
Submit type test report approval from reputable laboratory from country of
2 CONSULTANT - DAR AL HANDASAH CONSULTANTS
PROJECT: ETIHAD RAIL STAGE 2 - PROJECT C0306 PACKAGE 2C DESIGN & BUILD CONTRACT (DUBAI)
Approval for AEON valve is issued for this project and cannot be refer to any
CLIENT - ETIHAD RAIL (E.R)
project until the below required documents to be submmitted to DM for
PMC - EGIS
review of material test
certificate witness by third party at the foundry.
3
CONSULTANT - JACOBS
foundry details for (casting, machining, assembly etc.), warranty certificate,
CONTACTOR - JV (CRCC-GTGC)
chemical analysis test from approved DCL laboratory. local supplier project
SUB CONTRACTOR - DETECH CONTRACTING LLC reference from other government authorities.
CLIENT: EMAAR
This approval is strictly cannot be use as reference to any other project. It will
4
CONSULTANT: PARSONS OVERSEAS LIMITED
be rejected if used future submittals
CONTRACTOR: HILLS & FORT CONSTRUCTION L.L.C.
PROJECT : ETIHAD RAIL STAGE 2 PROJECT C0306 - PACKAGE 2C DESIGN & BUILD CONTRACT (DUBAI)
CLIENT : M/s. Etihad Rail
DEPARTMENT : AGRICULTURE & IRRIGATION DEPARTMENT
CONSULTANT : JACOBS
CONTRACTOR : CRGT JV/Detech Contracting (LLC)
:
SL MATERIAL APPROVAL
DESCRIPTION MANUFACTURER / BRAND LOCAL SUPPLIER PREVIOUS APPROVED PROJECT PREVIOUS APPROVED DATE DM COMMENT STATUS REMARKS
NO. LIST
21 March 2022
Attached Documents:
Distribution:
Acknowledgement of Receipt:
MS-0657-L100-0290 - 00
AEON - Double Eccentric butterfly valve PN16 (dn300) For Temporary Irrigation
Pumping Station
Project:
Submittal Title: AEON - Double Eccentric butterfly valve PN16 (dn300) For Temporary Irrigation Pumping Station
Location: Floor:
Material Description:
Comments:
Refer comments on attachment.
Review Date:
10 November 2021
Electronic Signature
ADAC Comments:
Comments:
Refer to AECOM comments/ Approval on the submission
Materials to comply with relevant authorities' standards
MIR to be approved upon delivery
Review Date:
10 November 2021
Electronic Signature
MS-0657-L100-0295 - 01
Motorized butterfly valve PN16 (DN250 & DN300). For Temporary Irrigation
Pump Station
Project:
Submittal Title: Motorized butterfly valve PN16 (DN250 & DN300). For Temporary Irrigation Pump Station
Location: Floor:
Manufacture: VAVLE - AEON, POLAND & Local Agent Supplier: IMEC - UAE
ACTUATOR - ENERTORK,
KOREA Material As Per
Specification:
Material Alternative:
Material Required -1 -1
Date
Estidama Credit:
Documents List:
Material -1 -1
Expected_Date:
Material Description:
Comments:
Refer comments on attachment.
Review Date:
10 November 2021
Electronic Signature
ADAC Comments:
Comments:
Refer to AECOM comments/ Approval on the submission
Materials to comply with relevant authorities' standards
MIR to be approved upon delivery
Review Date:
10 November 2021
Electronic Signature
Status N/A
(0 selected)
Revision
File Document No Revision Title Status
Date
ATTRIBUTES
Attribute 1 Infrastructure
MESSAGE
1 of 2 09-Nov-22, 11:11 AM
Propose material is recommended for approval subject to the following:
Refer attached Client letter ref. :
EMP-PMO/10-002/TR359-H&F/HES-SAS-kl/011-22 dt 19 July 2022
19.07.22
$FRQH[
&RQVWUXFWLRQRI*ROI&RXUVH,Q5XZDLV&LW\
$'12&+4
7%$
8QLWHG$UDE(PLUDWHV
)URP 0U6KHULI0RKDPPHG$'12&+4
&F 0U6DPHUDGHHE%HLURXWL$'12&+4
6WDWXV 1$
'2&80(17$77$&+0(176
VHOHFWHG
'RFXPHQW 5HYLVLRQ
)LOH 5HYLVLRQ 7LWOH 6WDWXV
1R 'DWH
)/$1*('%877(5)/<9$/9( %$SSURYHGZLWK
0$50
'1 &RPPHQWV
0(66$*(
:RUNIORZ5HYLHZ+LVWRU\
7KLVWUDQVPLWWDOZDVDXWRPDWLFDOO\JHQHUDWHG
'RF 5HYLHZ
6WHS 3DUWLFLSDQW &RPPHQWV
1R 2XWFRPH
0$5
$'12&'& $
0 .PRKLGHHQ
4$&KHFN $SSURYHG
$'12&6U 6 % :DUUDQW\VKDOOEHDVSHUWKH3URMHFW$JUHHPHQW'RFXPHQWZKLFKVKDOOEH
'LVFLSOLQH 1DVHHUXGGLQ $SSURYHG VXEPLWWHGVHSDUDWHO\7KHTXDQWLW\DQGVL]HVEHDVSHUWKHDSSURYHGVKRS
KWWSVPHDDFRQH[FRP/RJRQ
$FRQH[
%
$'12&6U
. $SSURYHG
4$4& &RPSO\ZLWK&203$1<FRPPHQWVRQ6XSSOLHU3UH4XDOLILFDWLRQ
%DODNULVKQDQ ZLWK
(QGRUVHPHQW
&RPPHQWV
%
$'12&&0 $SSURYHG
.(O1DMDU
(QGRUVHPHQW ZLWK
&RPPHQWV
%
$'12&30 6 $SSURYHG
$SSURYDO 0RKDPPHG ZLWK
&RPPHQWV
KWWSVPHDDFRQH[FRP/RJRQ
Ui
-*
unjJaÿjlLjljLLo AECOM
FCANADIAN RTcl
NGINEERING CONSULTANCY LLC
flIIR 1 RTC
ABU DHABI AIRPORTS 1 5 SEP 20Z1 BARA** NATURAL RESOURCES
MATERIM£ SUBfifiTTAL
Contract No AUH.06.17.0657 MS No MS-0657-L100-0290
W HECetVCDÿ%Date
Contract Title MTC Landscape Design & Build Proji Rev. 00
From Barari Natural Resources / CCME '
9-Sep-21
Material Required in Site as per Programme Expected date of material arrival on Site 5-6 Weeks
iij
iM
Raised By Stamp
Abdul Mateen
d*~ $ 7ÿ
Design Consultant Comments (If applicable) pARARI NATIIPAi RESOURCES
MTC Project: AUH.06.17.0657
1
© y slw °
5 rnsiaLl apnd e>p epcd? The/flcjep-i'cdUJi %otdoh ten 'npnj
4
The wrtH*1 consent ej The fi,£&>* £*§>'*& W appÿM.
(& rfafeei'ol shall be Inspected upon detiveej fa TheS/'fe .
gL ManulQchecfs t&t Repost CBet,r/i'CcHe to Beppo v ideJ Ufvn cJeUuefff To Si ’l? .
EPo/v CocdiV>3 Th/'e-kn&SS tk be cheeped on
Sl'fi Sl&ÿe bX 'Ihi'nd Lab .
\ SufleÿqÿnSP?ÿ re
- Date
CM*
I /yOVQ
rÿfo r<£> Q~\
HE-
Form ID- PD-DC-F- Page 1 of 2
0$ -io - a?2 1
""'J:1
International
Basatin �,
,, n d -.. c .1 p I n CJ l l C f
��
., ' ,·- � � ..........
• .
�q �L.,.i...4-JI iij-ll:l
DI.PAIUMrNf or MtJNtCIPAI 1nrs
ANll tllANSl'lllll
□
Part B: Material Submittal Discipline:
D Electrical Material
□ ■
Ocivil Material Architectural Material
Related Discipline
Mechanical Material Plumbing Oothers Specify:
Part C: Material Details Attachment Checklist
Spee' s. Ref.
ADM Spee. - IRRIGATION SYSTEMS - TECHNICAL SPECIFICATIONS
VOLUME Ill, Section-19 DI Pipes (02640)
1 Material Source Declaration Form □
Specified Material DI Fittings (pnl6): Check Valve, Butterfly Valve, Basket Strainer 2
Copies of Relevant Parts of Spees. BoQ &
Drawings □
DI Fittings: 1. Check Valve ( AW31/2, pn16), 3 Technical Comparison Table □
Proposed Material 2. Butterfy Valve (AW26/3, pn16)
3. Basket Strainer (AW33/1, pn16) Manufacturer's Technical Data/ Original
4
AEON, POLAND Catalogues
Name
Manufacturer's
Address Aeon International Gulf LLC 5 Recent Test Reports/Certificates □
Name lmech Building Materials Trading LLC Department of Economic Development
Supplier's
Address P.O.BOX: 93676 Dubai, UAE
--- - 6
(Registration) □
Estidama Approval N/A Manufacturer/ Supplier's Guarantee (as
□
Justification of Alternative Material I per Contract)
Part D: Contractors Review 8 Previous Approvals □
M.E HSE QA/QC Project Manager 9 Applicator's Method Statement □
Name Abdul,�eef Darwin AbduJ. �eef
J
Aiham Tayar 10 Others (Supplier's Profile & Photos) □
Signature � ,- J�}\·
Date .�
22-09-22 22-09-22 �09-22 22-09-22
We do certify that the material submitted herewith has been reviewed in details and in accordance with the Contract Documents except as
otherwise stated here above.
¾w to �eh.d. �� �-
Note/1): Client's/ Engineer's approval is for conformance with information given and design concept expressed in Contract Documents. Approval does not authorize changes to Contract
Documents. Client's/ Engineer's approval does not relieve the Contractor from his contractual obligation to ensure conformance to all Contract Documents. Any deviations, to the
Contract Documents found subsequent to Client's/ Engineer's approval ore to be corrected by the Contractor at no extra Cost/Time to the Employer.
,i,1')
1� / ')
?-�& 1,remafooal