Bolted beam to column connections — Design steps
STEP1A T-STUB FLANGE IN BENDING
(Circular yieleing
BB)
‘Side yielding
faq = Se 1250
‘Leis the length of the equivalent T-stub, nat the length of the pattem shawn.
value of b in STEP 1.
Notes:
For each of the situations above, where there is more than one patter of a type (circular or non-circular), use
the smallest value Of {ye OF fuer. 88 appropriate (see Tables 6.4, 8.5.and 6.8 of BS EN 1993-1-8).
‘The value of « depends on dimensions m and m, and is determined from the chart in Appendix G.
For consideration as an effective stiffener or flange in restricting the yield line pattems, see the limiting minimum
”