Professional Documents
Culture Documents
Scope of Accreditation To Iso/iec 17025:2017 Reliable Analysis Inc
Scope of Accreditation To Iso/iec 17025:2017 Reliable Analysis Inc
MECHANICAL
In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this
laboratory, as well as the satellite laboratory listed below, to perform the following tests on adhesives,
coatings (paints), deadeners, elastomers, foams, foundation board, metal, moldings, automotive paperboard,
plastics, rubber, sealers, tapes, automotive textiles, body components, and assemblies:
Abrasion
Abrex BMW: AA P 296; AA-0471; GS97034-1;
Ford: FLTM BN 155-01
Crocking AATCC 8;
FLTM BN 107-01; FLTM BN 107-02;
SAE J861
Crock/Mar LP-463PB-54-01
Wyzenbeek LP-463KB-06-01;
LP-463KC-04-02 (Procedures 1 & 2)
Abrasion (cont’d)
Chemical Wear LP-463KC-22-01;
SAE J948
Adhesion
Paint/Tape ASTM D3359;
LP-463LB-19-01;
FLTM BI 106-01;
GM9160P2;
GMW14829
Appearance
Color ASTM D2244;
SAE J1545
Bending/Flex/Mandrel
Cantilever/Textile GM9664P2;
GMW3390
Mandrel/Brittleness GMW16746
Cure GMW15891
Coating Thickness/Composition
Coulometric ASTM B504;
ISO 2177
Compatibility
Water Colorfastness AATCC 107
Compatibility (cont’d)
Vinyl Leather GM9141P2
Compression/Foam
Compression Set ASTM D3574-D;
FLTM BN 115-07;
ISO 815-1 (Type A); ISO 1856
Corrosion/Salt Spray
CASS ASTM B368;
FLTM BQ 105-01;
GMW14458
Density/Weight (cont’d)
Water Absorption ASTM D570;
ASTM D1056 (sections 43-49)
Dimensional/Measuring/Shrinkage
Fabrics ASTM D751 (sections 7.1 and 8);
Length ASTM D3773-A;
Width ASTM D3774;
Fabric Count ASTM D3775
Emissions
Aldehydes and Ketones FLTM BZ 156-01 (Parts A & B);
VDA 275;
PV 3925;
EN 717-3;
GMW15635;
STD 429-0002;
ISO 17226-2;
DIN EN ISO 14184-1;
STJLR.51.5232
Emissions (cont’d)
Sampling Bag Method for Measuring ISO 12219-2;
VOC from Vehicle Interior ISO 16000-3;
Compartment ISO 16000-6;
NES M0402; Ford 01.12.L-10661; MS-300-55;
MS-300-57; 0094Z-T7S-0000; FLTM BZ-108-01;
MES CF 080F; TSM0508G
Micro-Scale Chamber for Determining ISO 12219-3; ISO 16000-3; ISO 16000-6;
VOC Emissions FCA CS-13398; FLTM BZ 151-01
Flex/Fold
Bally Flex ASTM D6182;
FLTM BN 162-01;
ISO 5402-1;
ISO 32100
Hardness
Pencil ASTM D3363;
Honda: 0096Z-SEC-A000 (section 5.3.1)
Impact
Ball, Tup, Pendulum FLTM BO 151-01;
GMW14093;
ISO 6603-1
Impact (cont’d)
Cold Crack GMW14126;
GMW14127;
LP-463KB28-01 (Method B);
SAE J323-B
Immersion
Water FLTM BI 104-01 (Procedure B & C);
FLTM BI 104-04
Metals
Carbon/Sulphur Analysis ASTM E1019
Oven/Exposure Cycle
Accelerated Aging ASTM D751 (sections 77-84);
ASTM D3574-K;
LP-463LB-13-01
Pilling/Minking/Lint
Brush & Sponge LP-463KB-37-01;
FLTM BN 108-03;
FLTM BN 108-14
Pilling/Minking/Lint (cont’d)
Random Tumbler LP-463KB-38-01-A;
GMW3347
Plastics
Determination of Temperature of ISO 75-1; ISO 75-2;
Deflection Under Load (HDT) ASTM D648 Method B
Ravel Resistance
Scott-type GMW3217
SEM/EDS
Scanning Electron Microscope (SEM) ASTM E986;
Energy dispersive x-ray ASTM E1508
spectroscopy (EDS)
Scratch/Mar
Abrex – Nail Scratch BMW: GS97034-2
Paperclip GMW14130
Scuffing/Mar
Taber Scuff Finger FLTM BN 108-04;
SAE J365
Seam Strength
Conditioning + Tensile ASTM D751 (sections 71-76);
MS.50019 (Annex A);
FLTM BN 119-01;
GMW14145;
ISO 13935-1
Martindale LP-463KC-04-03;
GMW15377
Tensile
Adhesive Strength FLTM BN 151-01; FLTM BN 151-05;
GMW14757;
ISO 8510-2
Tensile (cont’d)
Flexural Properties ASTM D790;
ISO 178
Metals ASTM E8
Snag GMW147752
Tensile (cont’d)
Tear ASTM D624 (die C, except appendix);
ASTM D751 (sections 33-40);
ASTM D1004;
ASTM D2261;
ASTM D3574-F;
ASTM D5587;
ASTM D57332 (withdrawn 2008, no replacement);
FLTM BN 150-02;
GMW3326;
ISO 34-1;
ISO 4674-1;
ISO 6383-1;
ISO 8067;
ISO 9073-4;
ISO 13937-2
Weathering
QUV ASTM D4587;
ASTM G154
1
This accreditation covers testing performed at the main laboratory listed above, and the satellite laboratory
listed below.
2
This laboratory’s scope contains withdrawn, inactive or superseded methods. As a clarifier, this indicates
that the applicable method itself has been withdrawn or is now considered “historical” and not that the
laboratory’s accreditation for the method has been withdrawn.
3
This laboratory also uses customer supplied specifications and/or methods directly related to the testing
technologies and parameters listed above.
Vibration 3:
Sine 3 in. displacement CETP-00.00-E-412,
Random (20 to 2500) Hertz IEC R611 sec 6.4.2.8
Classical Shock 11,000 pounds force only
Up to 80 g’s
Up to 11 milliseconds
Servo Hydraulic Fatigue Test for Load (2.5 to 10) KIP TS371-06-003
or Displacement 3: Up to 6.0 inches travel
10 Hz max. frequency
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 0386.01
Valid to May 31, 2025
For the types of tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.