Professional Documents
Culture Documents
Z Main Bearing Removal
Z Main Bearing Removal
26) Mount a dial gauge on the adjacent main bearing so that the lift of the crank shaft can
be recorded.
27) Now with hydraulic pressure (1500-1650 bar) lift the crankshaft corresponding to the
main bearing clearance to the adjacent main bearing, and check the lift with the help
of a dial gauge.
28) Remove the lock screws from the lower shell.
29) Place the dismantling tool on the lower bearing shell such that the flap enters the oil
groove.
30) Pull the bearing shell round and up so that it lies on the journal and take it out safely.
Note: Top Main bearing clearance: max- 0.58mm, min- 0.40mm