The document calculates wind loads on a building structure based on its dimensions, wind speed data, and pressure coefficients. It considers four cases of wind direction - across the ridge with positive and negative Cpi values, and parallel to the ridge with positive and negative Cpi values. For each case, it lists the surface areas, pressure coefficients, and resulting wind loads on each surface.
The document calculates wind loads on a building structure based on its dimensions, wind speed data, and pressure coefficients. It considers four cases of wind direction - across the ridge with positive and negative Cpi values, and parallel to the ridge with positive and negative Cpi values. For each case, it lists the surface areas, pressure coefficients, and resulting wind loads on each surface.
The document calculates wind loads on a building structure based on its dimensions, wind speed data, and pressure coefficients. It considers four cases of wind direction - across the ridge with positive and negative Cpi values, and parallel to the ridge with positive and negative Cpi values. For each case, it lists the surface areas, pressure coefficients, and resulting wind loads on each surface.
WIDTH(W) = 15 m Terrian Category = 2 HEIGHT(H) = 6m Bay Spacing(sidewall) = 6.0 End = 15.0 SLOPE = 1 10 Enclosed Condition 0.2 -0.2
Calculation for wind pressure :
k1 = 1.00 General building, As per Table-1 of IS-875-Part-3 k2 = 1.000 For Terrian category 2 as per Table 2, Clause: 6.3.2.1-b k3 = 1.00 Upwind slope is less than 3 degree k4 = 1.00 for Non Cyclonic Region Vz = k1xk2xK3xK4XVb = 33 m/s wind pressure Pz = 0.6Vz^2 = 653.4 N/m2 = 0.65 kN/m2 Kd = 0.9 (Directionality factor) Ka = 0.9 (Area Averaging factor) Kc = 0.9 (Combination factor for pressure & Suction) Design wind pressure Pd(not be taken less than 0.7Pz) KdxKaxKcxPz = 0.48 kN/m2 H/W = 0.40 h/w≤0.5 L/W = 1.20 1<l/w≤1.5
Wind load on frame
CASE-1- WIND ACROSS THE RIDGE(ZERO DEGREE) Positive Cpi SURFACE Cpe Cpi Cp=(Cpe-Cpi) Wind load on frame A 0.70 0.2 0.50 0.5x0.48x6= 1.44 EF -0.94 0.2 -1.14 -1.14x0.48x6= -3.28 GH -0.40 0.2 -0.60 -0.6x0.48x6= -1.73 B -0.25 0.2 -0.45 -0.45x0.48x6= -1.30 C -0.60 0.2 -0.80 -0.8x0.48x15= -5.76 D -0.60 0.2 -0.80 -0.8x0.48x15= -5.76 CASE-2- WIND ACROSS THE RIDGE(ZERO DEGREE) Negative Cpi SURFACE Cpe Cpi Cpe-Cpi Wind load on frame A 0.70 -0.2 0.9 0.9x0.48x6= 2.59 EF -0.94 -0.2 -0.74 -0.74x0.48x6= -2.13 GH -0.40 -0.2 -0.2 -0.2x0.48x6= -0.58 B -0.25 -0.2 -0.05 -0.05x0.48x6= -0.14 C -0.60 -0.2 -0.4 -0.4x0.48x15= -2.88 D -0.60 -0.2 -0.4 -0.4x0.48x15= -2.88
CASE-3- WIND PARALLEL TO RIDGE(90 DEGREE) WITH Posative Cpi
SURFACE Cpe Cpi Cpe-Cpi Wind load on frame A -0.50 0.2 -0.7 -0.7x0.48x6= -2.02 EG -0.80 0.2 -1 -1x0.48x6= -2.88 FH/EG -0.80 0.2 -1 -1x0.48x6= -2.88 B -0.50 0.2 -0.7 -0.7x0.48x6= -2.02 C 0.70 0.2 0.5 0.5x0.48x15= 3.60 D -0.10 0.2 -0.3 -0.3x0.48x15= -2.16 CASE-4- WIND PARALLEL TO RIDGE(90 DEGREE) WITH Negative Cpi SURFACE Cpe Cpi Cpe-Cpi Wind load on frame A -0.50 -0.2 -0.3 -0.3x0.48x6= -0.86 EG -0.80 -0.2 -0.6 -0.6x0.48x6= -1.73 FH/EG -0.80 -0.2 -0.6 -0.6x0.48x6= -1.73 B -0.50 -0.2 -0.3 -0.3x0.48x6= -0.86 C 0.70 -0.2 0.9 0.9x0.48x15= 6.48 D -0.10 -0.2 0.1 0.1x0.48x15= 0.72