Professional Documents
Culture Documents
Planar Stages 2022
Planar Stages 2022
Planar Stages 2022
FEATURES
ዧ Positioning range:
XY – 1000×1300 mm, Y – 90 mm
ዧ ±0.5 µm or better bi-directional
repeatability RMS
ዧ ±1.5 µm or better calibrated
absolute accuracy
ዧ 1000 m/s velocity, 15 000 mm/s2
acceleration
ዧ Flexible modular design could be
customized for any ultra-precise
application requirements
ዧ System size and travel range
customization available
A
View A ( 1 : 5 )
912
804
200
584
500
25x7=175
352
25
1600 12,5 1250
200
135
2040
1450
2300
25x9=225
12,5
25
1550
1690
200x4=800
1250
200
200
200
M8x20 deep 200x5=1000
30 holes 1600
ACCESSORIES INFORMATION
Base for mechanical interface 1TS08-12-05-AP-1000
Cable management Included for 3 axes. May be developed for application requiremens
ADDITIONAL DETAILS
Dimensions of moving platform (W × L) mm 2300 × 1690 × 912
Stage dimensions (W × L × H) mm 295 × 130
Measurement system Metric/Imperial
Orthogonality 11) µrad / arcsec 48.48 / 10
Aperture (center placed) (W × L) mm can be requested separately
Weight kg TBD
FEATURES
ዧ Travel range: 300 × 300 mm
ዧ Compact Design
ዧ Resolution: up to <0.31 nm
ዧ Direct drive zero backlash system
ዧ High resolution non-contact
optical incremental encoder
ዧ Bidirectional repeatability:
±0.15 µm
ዧ Maximum velocity: 2000 mm/s
ዧ Maximum Acceleration:
20000 mm/s²
ዧ High accuracy linear guide and
105 305 1) With x4 evaluation; system can be delivered
carriage system with caged balls for M8 screw
4 clearance holes with standard analog SIN/COS encoder
ዧ Accuracy: ±1.00 µm inteface for personal interpolation.
2) Absolute Accuracy & Bi-Directional
ዧ Long life performance guaranteed Repeatability measurements processed by
300
system.
0...153
370
50 max
400
0...153
9x50=450
520 0...153
8) Recommended controllers & Recommended
drivers can be optimized for a certain
application. Plaese contact Standa for
recommendation.
9) Recommended power supply depends on
required duty cycle and load. Please contact
Standa for recommendation.
10) Scalar Control can be implemented with USB
/ TCP-IP / RS-232 communication iterface; for
vector control we recommend to use EtherCAT.
11) Differential Outputs are available in passive
(buffered) or active (modulated) way with
LCMv2.
12) Stages can be assembled with required
orthogonality by request.
ACCESSORIES INFORMATION
Base plate for mechanical interface Granite recomended
Cable management Included for both axes. May be redisegned by request
ADDITIONAL DETAILS
Dimensions of moving platform (W × L) mm 610 × 520
Stage dimensions (W × L × H) mm 912 × 846 × 126.5
Measurement system Metric / Imperial
Orthogonality 12) µrad/arcsec 24 / 5
Aperture (center placed) (W × L) mm 310 × 310
Weight kg TBD
FEATURES
ዧ Direct drive zero backlash system
ዧ High resolution non-contact
optical incremental encoder
ዧ Integrated, low-profile, XY, linear
motor stage
ዧ High accuracy linear guide with
crossed roller bearings, anti-creep
ዧ Easy integration with
metric/imperial opto-mechanical
systems
system.
40 holes
8) Recommended controllers & Recommended drivers
can be optimized for a certain application. Please
contact Standa support for recommendation.
4x100=400
746
for recommendation.
10) Scalar Control can be implemented with USB /
TCP-IP / RS-232 communication iterface; for vector
control we recommend to use EtherCAT.
0...125
6x60=360
12) Stages can be assembled with better orthogonality
4x100=400 by request.
0...125 430 0...125
FEATURES
ዧ Travel range: 300 × 300 mm
ዧ Resolution: up to 1 nm
ዧ Direct drive zero backlash XY
planar system
ዧ High resolution non-contact
optical incremental encoder
ዧ Absolute bidirectional
repeatability: ±0.15 µm
(±0.10 µm RMS)
ዧ Maximum velocity (no load, upper
axis): 2500 mm/s
ዧ Maximum acceleration (no load,
For M6 (1/4-20) screw 1) System can be delivered with standard analog
upper axis): 25000 mm/s² 8 clearance slots
SIN/COS encoder inteface for personal
ዧ High accuracy linear guide with interpolation.
2) Absolute Accuracy & Bi-Directional
crossed roller bearings with anti Repeatability measurements processed by
cage creep system Zygo ZMI 501 Michelson laser interferometer.
300 (12'')
70
ADDITIONAL DETAILS
Dimensions of moving platform (W × L) mm 500 × 500
Stage dimensions (L × W × H) mm 518 × 622 × 112
Measurement system Metric / Imperial
Orthogonality 11) µrad/arcsec 24 / 5
Protection level 13) Basic
RoHS Compliant
Weight kg 54
Active axes X, Y
2) bsolute accuracy & Bi-directional repeatability
A
measurements are processed with Zygo ZMI 501
Travel range 120 × 120 mm Michelson laser interferometer.
Encoder type Optical 3) itch & yaw measurements are processed with
P
Encoder model Len1 11D-ALI-COL electronic autocollimator. Resolution
Encoder resolution any of the range: of 11D-ALI-COL: 1 µrad. Environment error: 1 µrad.
25 nm to 5 µm (on demand) 4) aximum velocity is electrically limited by encoder
M
Encoder interface Differential RS422 and driver CUT-OF frequency; maximum velocity is
also limited by guiding system.
Internal multiplier Yes
5) aximum acceleration is limited by drivers` peak
M
Multiplication factor 1) 4 – 200 (on demand)
current, motors` peak current and external load
Encoder grating period 20 µm (inertia). Please contact Standa for support.
Reference mark (index) Yes 6) oad capacity is limited by position of load and
L
Absolute accuracy 2) integrated guiding system. Please contact Standa
support for loading calculation.
Before calibration ± 4 µm
After calibration ± 0.5 µm
7) oving mass is constant parameter of system
M
which characterize m0 or inertia of unloaded
Bi-directional repeatability (peak to peak) 2) ± 0.15 µm system.
Bi-directional repeatability (RMS) 2) ± 0.1 µm 8) ecommended controllers & recommended drivers
R
Pitch 3) ±30 µrad / ±6.2 arcsec can be optimized for a certain application. Please
Yaw 3) ±30 µrad / ±6.2 arcsec contact Standa support for recommendation.
40
ADDITIONAL DETAILS
100
FEATURES
ዧ Travel range: 75 × 75 mm
ዧ Extremely compact direct drive
design
ዧ Resolution: up to <240 nm
ዧ Direct drive zero backlash system
ዧ High resolution non-contact
magnetic incremental encoder
ዧ RMS Bidirectional repeatability:
±0.2 µm
ዧ Maximum velocity: 150 mm/s
ዧ Maximum acceleration:
7000 mm/s²
ዧ High accuracy linear guide and
carriage system with caged balls
ዧ Long life performance guaranteed
ዧ Easy integration with
metric/imperial opto-mechanical
systems
ዧ Can be applied to industry
applications like: metrology,
microscopy, micromachining 130...167,5
48
ዧ Available for OEM integration in
0...37,5 197 0...37,5 0...37 197
high volumes A
ዧ All measurement reports are 76,8
75
included by default! M3x7 deep
10 holes 50 View A
65
75,6
70,6
120
100
130
B
50
B-B(2:1) B
3
40
65
15 100 For M6 screw
195
4 clearance holes
ADDITIONAL DETAILS
Dimensions of moving platform (W × L) mm 195 × 130 mm
Stage dimensions (home position) (W × L × H) mm 197 × 197 × 50 mm
Measurement system Metric
Orthogonality 12) μrad/arcsec TBD
Protection level Basic
RoHS Compliant
Weight kg 2.6
FEATURES
ዧ Travel range: 20×20 mm (planar)
ዧ Resolution: <1 nm
ዧ Accuracy: <±0.15 µm (calibrated
to load)
ዧ Bidirectional repeatability (RMS):
±0.075 µm
ዧ Maximum velocity: >500 mm/s
ዧ Maximum Acceleration:
>45000 mm/s²
ዧ Direct drive zero backlash system
ዧ High resolution non-contact
optical incremental encoder 8MRL80 8MTL120XY 1) With x4 evaluation; system can be delivered
with standard analog SIN/COS encoder
ዧ Long life performance guaranteed inteface for interpolation by external drive (e.g.:
UDMHP series).
ዧ Easy integration with
63
51
75
180 7) Moving Mass is constant parameter of system
included by default! which characterize m0 or inertia of unloaded
170 system.
8) Recommended controllers & Recommended
drivers can be optimized for a certain
application. Plaese contact Standa for
recommendation.
190
9) Recommended power supply depends on
required duty cycle and load. Please contact
A Standa for recommendation.
Ø 15H7 M6x9 deep 10) Scalar Control can be implemented with USB/
TCP-IP / RS-232 communication iterface; for
2
8MTF-200
8MTF200XY
FEATURES
ዧ Travel range: 200×200 mm Ball screw linear translation stage of series 8MTF200XY and
ዧ Clear aperture: 205×205 mm 8MTF‑200 is based on pair of stepper (optionally with rotary
encoders) or 3 phase BLDC servo motor technology. High precision
ዧ Resolution: up to <0.31 nm
ball screw & servo motor combination allow achieve high precision
ዧ Ultra high precision ball screw and self-locking system through extremely cost effective way.
ዧ High resolution non-contact optical Optionally available non-contact optical encoder as a feedback
incremental encoder (dual loop system integrated directly on the moving load, guarantees sub-
mode) nanometer resolution of positioning with high precision.
ዧ Bidirectional repeatability: Naturally aged aluminum alloy guaranties high temperature
±0.5 µm (0.45 µm RMS) stability, softness of 8MTF200XY instruments and excellent long
period kinematics without drift of guide system. Miniature ultra-
ዧ Accuracy: up to ±1.5 µm
high precision linear recirculating guiding system guarantees
ዧ Maximum velocity: 50 mm/s minimal friction and excellent motion stability.
ዧ Maximum Acceleration: 250 mm/s2 Positioning table of series 8MTF200XY can be optionally prepared
for clean rooms and vacuum up to 10-3 Torr .For higher vacuum
ዧ Ultra high precision linear guide with
please contact Standa support. Additional requirement of
recirculating balls
cleanliness or sealing of the stage can be supported on demand.
ዧ Cables Can be customized for Motorized translation stage can be easily connected to standard
different OEM electronics imperial/metric optical table directly. XY scanning stage is directly
ዧ Long life performance guaranteed assembled to PLANAR three-piece like design, without using
any connecting plates. Extremely high straightness, flatness and
ዧ Easy integration with metric/imperial
orthogonality is available by default.
opto-mechanical systems
Motion control of 8MTF series translation stages is available with
ዧ Default <15 arcsec orthogonality
Standa or ACS motion Controllers & Drivers in exposed or housed
ዧ Can be applied to applications like: configurations.
microscopy, metrology laser cutting, For industry applications 8MTF200XY linear positioning stages can
scribing, drilling, marking be supplied mounted on aluminum breadboard 1B-Al, honeycomb
ዧ Solid Integrated Planar Design breadboard 1HB, standard optical table 1HT or extremely flat
available with or w/o aperture granite plate 1GB fully sealed from spray and dust to ensure long
ዧ All measurement reports are and reliable performance of kinematic pairs.
included by default!
ACCESSORIES INFORMATION
Base plate for mechanical interface Not required
Z configuration Not available (choose from other Standa stages series)
ADDITIONAL DETAILS
Dimensions of moving platform (W × L), mm 335 × 380
Overall linear stage dimensions (W × L × H), mm 402 × 450 × 76
Measurement system Metric / Imperial
Orthogonality 12), µrad / arcsec 73 / 15
Protection level 13) Optionally can be supplied with special cover (with air purge & dust protection)
RoHS Compliant
Weight, kg Request
205*
3) Pitch & Yaw measurements are processed
For M6 (1/4-20) screw with 11D-ALI-COL electronic autocollimator.
200 (8'')
6 clearance slots
448
215
Standa support for recommendation.
25
40x6=240
380
245
65
25
40x6=240
13) Protection of guiding system is limited and
260 Dial knob not supposed to be used in wet and dusty
8MTF-200
335 enviroment.
FEATURES
ዧ Travel range: 120×120 mm (planar)
ዧ Resolution: <0.31 nm
ዧ Accuracy: <±1.00 µm (calibrated to
load)
ዧ Bidirectional repeatability (RMS):
±0.40 µm
ዧ Maximum velocity: >150 mm/s
ዧ Maximum acceleration: >250 mm/s2
ዧ Low friction ball screw transmision
ዧ High resolution non-contact optical
encoder
ዧ Long life performance guaranteed
ዧ Easy integration with metric/imperial
opto-mechanical systems Stage of series 8MT120XY is based on pair of rotary motor
technology. Ball screw technology enables user to reach low
ዧ PLANAR assembly with 5 arcsec
friction along with good accuracy and repeatability.
orthogonality
Linear non-contact optical encoder as an optional feedback system
ዧ Ultra percise crossed roller linar guarantees direct control of position with sub-nanometer resolution
bearings with anti creep cages of motion and DUAL LOOP control architecture.
ዧ Cost efficient solution Naturally aged aluminum alloy guaranties high temperature
ዧ Can be applied applications stability, softness of 8MT120XY instruments and excellent long
like: metrology, miscroscopy, period kinematics without drift of guide system. Special linear rails
micromachining with crossed roller bearings and cage drift protection enable high
stiffness, while dynamic response guarantees high bandwidth of
ዧ Cables can be customized for
control loop.
different OEM electronics
Translation stages of series 8MTL120XY can be prepared for clean
rooms and vacuum up to 10-3 torr with small changes. For higher
vacuum please contact Standa.
Motorized translation stage can be easily connected to standard
imperial/metric optical table directly. XY scanning stage is directly
assembled to PLANAR like design, without using any connecting
plates. Extremely high orthogonality is available by default,
however for low static errors it is recommended to use the granite
plate.
Motion control of 8MT120XY series translation stages is available
with Standa or ACS motion Controllers & Drivers in exposed or
housed configurations. It is recommended to driver the stage with
the step motor by 8SMC5-USB series scalar driver.
For industry applications 8MT120XY stages can be supplied
mounted on standard optical table or extremely flat granite
plate fully sealed from spray and dust to ensure performance of
kinematic pairs.
ACCESSORIES INFORMATION
Base plate for mechanical interface Granite is reccomended
XY stack –
Z configuration Available
ADDITIONAL DETAILS
Open aperture (W × L) mm N/A
Dimensions of moving platform (W × L) mm 240 × 240
Overall linear stage dimensions (W × L × H) mm 436.50 × 436.50 × 85.00
Measurement system Metric / Imperial
Orthogonality 11) µrad/ arcsec 24 / 5
Protection level Can be suplied with special cover
RoHS Compliant
Weight kg 13.5
100
150
50
orthogonality by request.
0...60 0...60 12) Scalar Control can be implemented with USB/
Connector TCP-IP / RS-232 communication iterface; for
HDB15(M) vector control we recommend to use EtherCAT.
13) Protection of guiding system is limited and
not supposed to be used in wet and dusty
240 enviroment.
436,5 max
FEATURES
ዧ Supports up to 64 axes and thousands of I/O
ዧ Advanced Profile Generation and Servo Control
Algorithms for
ዧ Maximum Motion Performance
– ServoBoost
– LearningBoost
– MotionBoost
– Multi-axis Lookahead and Corner Rounding
– SmoothPath
– MIMO Gantry Control
– Cascaded Dual Loop Control
– Customized Algorithms (Contact ACS)
ዧ Universal Motor and Encoder Support for
Maximum Flexibility
ዧ Max Drive Current: 15/30 A Per Axis
ዧ Drive Supply Input: 85 – 265 Vac
The SPiiPlusCMxa is a member of ACS Motion Control’s
ዧ Built-In 4-Axis Pulse/Direction (PDMnt) Interface
SPiiPlus series of products and is designed to meet
ዧ Functional Safety: STO, SS1 the needs of OEMs with demanding multi-axis motion
ዧ 12 or 16 bit SinCos and Analog Input Resolution control applications. Its unique multi-processor
architecture leverages powerful profile generation
ዧ Feedback Channels: 4 (AqB, SinCos, or and servo control algorithms to maximize motion
Absolute) performance, while its universal motor and encoder
ዧ Digital I/O technology provides the system designer flexibility to
– 4 High-Speed Position Capture (MARK) Inputs control most any type of motor or stage. As an EtherCAT
master it can control ACS products within the SPiiPlus
– 8 Limit Sensor Inputs
Motion Control Platform as well as 3rd party EtherCAT
– 3 Brake Outputs products.
– 3 High-Speed Position Event Generation The SPiiPlusCMxa is highly configurable and supported
(PEG) Engines with up
by many advanced servo tuning and application
– to 10 Configurable Outputs development tools available in MMI Application Studio.
– 8 General Purpose Digital Inputs Users can control and generate motion profiles for up to
– 8 General Purpose Digital Outputs 64 axes. Configure the SPiiPlusCMxa to include 1, 2, or
ዧ Analog I/O 3 built in drives with one of three current levels: 5/10A,
10/20A, or 15/30A.
– 6 General Purpose Analog Inputs (shared with
SinCos) * The SPiiPlusCMxa is a drop-in replacement for the SPiiPlusCMba or
SPiiPlusCMhp offering improved jitter and noise performance and STO and
– 2 General Purpose Analog Outputs SS1 functional safety features.
Product
CMxayA… CMxayB… CMxayC…
(y - number of axes)
Number of built-in drives 1,2,3
Drive Supply voltage input [V] 85 - 265VAC, single or 3 phase or 120 - 375VDC
Control voltage input [Vdc] 24±10%
Phase current Cont./Peak Sine amplitude [A] 5 / 10 10/20 15/30
Phase current Cont./Peak RMS [A] 3.6 / 7.1 7/14 10.6/21.2
Peak current time [sec] 1
Max. output voltage [Vdc] (Vac in) x1.41 x 97%
Max. RMS input current
18A for 1-phase supply
1-phase supply [A] 18 24
15A for 3-phase supply
3-phase supply[A]
Min. load Inductance, at max. motor voltage
1
[mH]
Max. Heat dissipation per axis [W] 33 67 102
Weight [gram] 5750
Dimensions [mm³] 324x249x120
FEATURES
ዧ Powerful & Smart EtherCAT Drive ዧ Smart Motion related I/O
Module – Digital I/O
– Two drives per module for – Inputs: 4 encoder registration
Gantry control MARK / general purpose
– Voltage: 12 Vdc – 100 Vdc – Outputs: 2 Position Event
– Current: Up to 13.3 A / 40 A Generators, 2 motor brake /
(cont./peak) general purpose
ዧ The Ultimate Drive for Demanding ዧ Analog I/O
Positioning Applications – Inputs: 4, 12 bit resolution,
– Sub-nanometer standstill jitter ±10 V
– Nanometer tracking error and – Outputs: 4, 16 bit resolution,
optimal velocity smoothness ±10 V
ዧ A Lower Cost of Ownership
Alternative to Linear Drives
– Lower heat dissipation
– Better reliability
The NPMPM is a line of the most advanced servo drives available
– Significantly smaller
today.
– Simpler supply requirements
It is specifically designed to address the most demanding
– Digitally controlled and easy applications with regards to move and settle times, standstill
setup
jitter, and velocity smoothness, such as wafer metrology and
ዧ Uncompromised speed and inspection, FPD inspection, and ultra-precision machining for
resolution processing of optical components.
– Up to 4 Analog Sin-Cos 1Vptp It is based on the proprietary and unique technology that exceeds
encoders with frequency up to stand still jitter and tracking error performance that until now
10 MHz has been achieved only with linear drives, with reduced cost of
– Encoder multiplication of 4 to ownership.
65,536 With the optional combination of a 10MHz laser encoder interface
– Automatic encoder and the powerful algorithm, demanding sub-nanometer resolution
compensation and error positioning systems can achieve ultimate throughput and accuracy
detection
with minimal sensitivity to disturbances and stage to stage
– Dual feedback support manufacturing differences.
– Two squared Sin-Cos The NPMPM is a slave that runs under any ACS EtherCAT masters.
– Position feed forward for A comprehensive set of software support tools are provided for
active vibration isolation module configuration, setup and tuning.
systems
– Optional internal relays for
dynamic braking (shorting
motor phases)
SPECIFICATIONS
Per Axis A B C D
Continuous/Peak current Sine 3.3 / 10 A 6.63 / 20 A 103 / 30 A 13.33 / 40 A
amplitude
Continuous/Peak current 2.3 / 7 Arms 4.6 / 14.1 Arms 7 / 21.2 Arms 9.4 / 28.2 Arms
Maximum cont. Input current 2.6 Arms 5.3 Arms 8 Arms 10.6 Arms
Maximum heat dissipation, W 7 + 0.9 × (no. of drives) 7 + 2.1 × (no. of drives) 7 + 3.7 × (no. of drives) 7 + 5.6 × (no. of drives)
Maximum cont./peak output 260 / 780 W 520 / 1560 W 790 / 2340 W 1050 / 3120 W
power @ 100 Vdc
Peak current time 1 sec
Minimum load inductance 0.05 mH
@100 Vdc. Can be derated
linearily for lower voltages
PER MODULE
Control voltage input 24 ±10% Vdc
Drive voltage input range 12 – 100 Vdc (96 Vdc recommended)
Maximum output voltage (Vin motor) × 88% Vdc
Maximum cont. input current 5.2 Arms 10.6 Arms 16 Arms 21.2 Arms
FEATURES
ዧ In LUMS trajectories can be
generated by importing CAD files
(DXF, DWG, STL, Gerber, NC Drill,
etc.) or by drawing them with built
in tools.
ዧ Stitching feature to split large
objects to machine with galvo
scanners
ዧ Advanced slicing and hatching
algorithms allows to slice 300 MB
file with 4 million triangles in less
than a minute
ዧ Formulas and Variables can be DOT. LINE. PLANE. SHAPE
used and interpreted in text as
LUMS software imports DXF, DWG, Gerber files to prepare for
well using {}
laser cutting, etching, ablation and other 2D, 2.5D applications. All
ዧ LUMS controls all of the hardware objects are imported as lines and arcs for efficient machining. Set
directly size and position of the object or simply drag it where it should be
ዧ LUMS laser machining software machined.
controls positioning stages Use Hatching to fill the volume of the object. Use Stitching feature
directly using manufacturer’s .dll to split large objects to machine with galvo scanners.
files
Using 64-bit architecture, LUMS not only supports large and
ዧ LUMS laser machining complex STL files, but handles them really fast. Our advanced
software controls many hardware slicing and hatching algorithms allows to slice 300 MB file with 4
of the machine directly: stages, million triangles in less than a minute. Faulty STL models can be
galvo, lasers, sensors, I/O fixed using LUMS Slice Repair tool.
interfaces
LUMS allows NC Drill file import for laser drilling processes. Adjust
ዧ LUMS supports several cameras: via hole size by offsets to compensate beam spot diameter. Use
one camera for general view and either helical or layer by layer drilling. In Helical drilling mode, Z axis
one camera for high resolution moves constantly, while XY axes draws circles. In Layer mode a set
view number of repeats are done before moving Z axis by a specified
ዧ Fully compatible with ACS step size to increase drilling depth. Use Stitching tool to center
products each hole at the center of galvo scanners. Combine NC Drill file
ዧ Key Applications with Gerber files to do both PCB etching and drilling.
Simple shapes like lines, circles, arcs and rectangles are easy to
– Laser Additive Manufacturing
draw in LUMS software. You can draw them by hand and/or add
– PCB Laser Processing and precise parameters for size and position. You can even draw poly-
fabrication
lines and polygon shapes with a special easy to use tool. All closed
– Laser Engraving shapes can be hatched with one of the hatching types (lines,
– Laser Drilling cross-hatching, dots, contours). Select motion speed and laser
– 3D printing parameters either for each shape, groups of shapes or the whole
MOTION CONTROL
Galvanometric scanner control + + +
Positioning stages control + + +
Up to 3 axes control + + +
Unlimited number of axes - + +
Galvo+Stages Stitching - + +
Virtual Joystick + + +
FILE IMPORT
DXF, DWG + + +
STL Up on request + +
STP, IGES - + +
Gerber, NC Drill/Excellon Up on request + +
TXT, CSV + + +
TOOLS / COMMANDS
Drawing tools + + +
Hatching (lines, cross-hatching) + + +
Advanced hatching (stripes, chess pattern) - + +
Measuring - + +
Logical Commands (Loop, If) + + +
Variables - + +
Math functions + + +
Loging, Data Export - + +
Sample surface height mapping - + +
3D Printing tool Up on request + +
Support generation for 3D models - + +
3D model fixing Up on request + +
DEVICE CONTROL
IO + + +
Serial Port control + + +
Wait For IO Trigger - + +
SECURITY FEATURES
User access levels - + +
Process Parameter locking - + +
CUSTOM FEATURES
APIs to add new hardware and features - + +
Development of custom features and hardware support (up to 16 hours) - + +
Development of custom features, hardware support and user interface - - +
SYSTEM
64 bit support + + +
Multicore processing + + +
Manufacturer of Opto-Mechanical equipment and lasers for research, industry and education
Israel Slovakia
Ben Moshe Kvant spol. s.r.o.
64, Arlozorov St. Ramat-Gan, FMFI UK - Mlynská dolina
P.O. Box 18125, Tel-Aviv 61181, Israel 842 48 Bratislava, Slovakia
Phones: +972-3 670 00 07 Phone: +421-2-65411344
Fax: +972-3 672 73 19 Fax: +421-2-65411353
E-mail: bms@ben-moshe.net E-mail: kvant@kvant.com