Professional Documents
Culture Documents
Instructions
Instructions
com Page 1
In order to create this freestanding lace embroidery decorated pillow case you will need:
Step-by-step instructions
3. Cut away the excess stabilizer. Please make sure you do not damage the lace when cutting as
close to it as possible.
4. Arrange the lace pieces as shown on the image and attach the pieces to each other with man-
ual stitches, using the same thread you used for stitching them out. The stitches are to be applied
on the places marked with small squares on the image below. On the ones marked with red there
are small loops to make connecting easier.
5. When you have connected the 6 part together, place the lace decoration face up on top of
the pillow case. You can attach the lace to the fabric with pins or with temporary manual stitches.
6. Stitch the freestanding lace to the fabric using machine zigzag stitch – we used a 2 mm stitch
with a density of 0.5 mm.
When you are done stitching the freestanding lace and the fabric together:
7. Very carefully cut away the excess fabric from below the lace embroidery. Please take it easy
and make sure you do not cut the thread.
8. When you are done cutting away the fabric - dip the pillow case in water until the stabilizer has
been completely dissolved.