Professional Documents
Culture Documents
201-32-29 Rev 1 K0654
201-32-29 Rev 1 K0654
CAGE: K0654
Cheltenham Road, Gloucester, GL2 9QH, England
Telephone: +44 (0) 1452 712424 Fax: +44 (0) 1452 713821
SERVICE BULLETIN
se
ns e u
LANDING GEAR - MAIN LANDING GEAR - TO ADD TRACKING NUMBERS TO PARTS LISTED IN
itio siv
AIRBUS AIRWORTHINESS LIMITATIONS SECTION (ALS)
(RETRACTION ACTUATOR PINS AND FORWARD PINTLE PIN CROSS BOLTS)
nd clu
1. Planning Information
Co ex
A. Effectivity
s & the
Aircraft affected: A321-100
rm or
A321-200
Te 3 f
Unit affected: Main Landing Gear
S 02
Part/Type Nos.: 201659 Series
SL -2
201584 Series
201521 Series
er eb
nd 3-F201388 Series
201528 Series
201685 Series
)u 1
up on
201523 Series
(G Ki
201387 Series
es ang
114193 Series
rn d b
B. Concurrent Requirements
he e
(1) Messier-Dowty Limited tells you that the Service Bulletin that follows must be done at
ut ad
(a) 201-32-22
(b) 100-32-172 (114193 Series, Retraction Actuator)
ina Do
C. Reason -
Ch l -
(1) It is necessary to be able to trace and monitor parts listed in the Airbus Airworthiness
of ntia
Limitations Section (ALS). It is not possible for parts not marked with a serial number or
a tracking number to be traced and monitored.
ide
D. Description
nf
(1) This Service Bulletin tells operators or repair and overhaul centres that parts listed in
Co
the ALS that do not have a serial number are to be marked with an appropriate tracking
number. The tracking number can be allocated by the operator or repair and overhaul
centre: refer to Accomplishment Instructions.
SERVICE BULLETIN
(2) This Service Bulletin tells operators that new parts with serial numbers are introduced.
se
This Service Bulletin can be accomplished in service with any combination of parts that
ns e u
have been marked with a serial or tracking number.
itio siv
(3) Messier-Dowty Limited tells you that new manufacture will include serial numbers on
the parts in this Service Bulletin on main landing gears on which:
nd clu
(a) the strike number 4 has been cancelled on the A321-200, 201585 series main
Co ex
landing gear leg and dressings nameplate and looks like this 4
s & the
(b) the strike number 14 has been cancelled on the A321-200, 201523 series main
landing gear leg and dressings nameplate and looks like this 14
rm or
(c) the strike number 14 has been cancelled on the A321-100, 201387 series main
Te 3 f
landing gear leg and dressings nameplate and looks like this 14
S 02
(d) the strike number 1 has been cancelled on the A321-200, 201590 series
SL -2
retraction actuator nameplate and looks like this 1
er eb
(e) nd 3-F
the strike number 7 has been cancelled on the A321-100, 114193 series
retraction actuator nameplate and looks like this 7 .
)u 1
(4) Messier-Dowty Limited recommend that you do this Service Bulletin, at the next shop
up on
(a) the strike number 4 has not been cancelled on the main landing gear leg and
(G Ki
(5) Messier-Dowty Limited recommend that you do this Service Bulletin, at the next shop
visit on A321-200, 201584 series main landing gear where:
rlin Y
(a) the strike number 4 has not been cancelled on the main landing gear leg and
Ai y:
rn d b
(6) Messier-Dowty Limited recommend that you do this Service Bulletin, at the next shop
ut ad
(a) the strike number 14 has not been cancelled on the main landing gear leg and
dressings nameplate and looks like this 14 .
ina Do
(7) -
Messier-Dowty Limited recommend that you do this Service Bulletin, at the next shop
visit on A321-100, 201388 series main landing gear where:
Ch l -
of ntia
(a) the strike number 14 has not been cancelled on the main landing gear and
dressings nameplate and looks like this 14 .
ide
(8) Messier-Dowty Limited recommend that you do this Service Bulletin, at the next shop
nf
(a) the strike number 14 has not been cancelled on the main landing gear leg and
dressings nameplate and looks like this 14 .
SERVICE BULLETIN
(9) Messier-Dowty Limited recommend that you do this Service Bulletin, at the next shop
se
visit on A321-100, 201685 series main landing gear where:
ns e u
(a) the strike number 4 has not been cancelled on the main landing gear leg and
itio siv
dressings nameplate and looks like this 4 .
nd clu
(10) Messier-Dowty Limited tells you that the cross bolts installed in A321 main landing
gears between MSN1503 to MSN2115 have pre-service bulletin part numbers marked
Co ex
through with a line and are identified with a new part number and a serial number
s & the
(11) Messier-Dowty Limited tells you that the cross bolts installed in A321 main landing
gears are identified with a new part number and a serial number from MSN2117.
rm or
(12) Messier-Dowty Limited tells you that the retraction actuator pins installed in A321 main
Te 3 f
landing gears between MSN 1651 to MSN2115. have pre-service bulletin part numbers
S 02
marked through with a line and are identified with a new part number and a serial
SL -2
number.
er eb
(13) Messier-Dowty Limited tells you that the retraction actuator pins installed in A321 main
nd 3-F
landing gears are identified with a new part number and a serial number from
MSN2117.
)u 1
E. Compliance
up on
(2) Tracking numbers are necessary to monitor the life of parts: refer to:
(G Ki
F. Approval
Ai y:
(1) The technical content of this Service Bulletin has been approved under the authority of
rn d b
G. Manpower
ut ad
(1) Messier-Dowty Limited make an estimate that 8 man-hours are necessary to mark the
So wnlo
tracking numbers and restore the protective treatments when you do this Service
Bulletin at the next shop visit.
ina Do
NOTE: -
It is assumed that the equipment has been placed in a maintenance
status. The man-hour estimates do not include preparation or
Ch l -
administrative functions.
of ntia
(1) None.
nf
I. References
Co
SERVICE BULLETIN
(5) Messier-Dowty Limited Component Maintenance Manual 32-31-86.
se
(6) Messier-Dowty Standard Practices Manual 20-00-10.
ns e u
(7) Messier-Dowty Limited Service Bulletin 201-32-22.
itio siv
(8) Messier-Dowty Limited Service Bulletin 201-32-172.
nd clu
(9) Airbus Service Bulletin A320-32-1259.
Co ex
(10) Airbus Airworthiness Limitations Section (ALS).
s & the
J. Other Publications Affected
(1) Messier-Dowty Limited Component Maintenance Manual 32-11-82.
rm or
Te 3 f
(2) Messier-Dowty Limited Component Maintenance Manual 32-11-83.
S 02
(3) Messier-Dowty Limited Component Maintenance Manual 32-12-11.
SL -2
(4) Messier-Dowty Limited Component Maintenance Manual 32-12-12.
er eb
(5) Messier-Dowty Limited Component Maintenance Manual 32-12-21.
(6)
nd 3-F
Messier-Dowty Limited Component Maintenance Manual 32-12-22.
(7) Messier-Dowty Limited Component Maintenance Manual 32-31-47.
)u 1
up on
2. Material Information
(G Ki
(1) The prices shown in this material section are valid for the year, ending December 31st
2008. Refer to the Messier-Dowty Spare Parts Price Catalog for subsequent year
rlin Y
prices or contact your regional Messier-Dowty Customer Support Centre for the latest
Ai y:
(2) This Service Bulletin tells operators or repair and overhaul centres to mark new
he e
parts without serial numbers with new parts that are marked with serial
numbers.
ina Do
instruction/disposition.
of ntia
A New part
nf
C Expendable part
D Old part to be discarded
E Part of new design valid for new manufacture
F Part number change only
SERVICE BULLETIN
Interchangeability codes (IC) given below show basic information to help you understand the
se
interchangeability of parts. For full explanation of interchangeability codes, please refer to
ns e u
the latest edition of ATA specification 2000.
itio siv
IC Instruction/information
01 One-way interchangeable
nd clu
02 Two-way interchangeable
Co ex
03 Not interchangeable
s & the
04 Interchangeable as a set
05 Qualified Interchangeability
rm or
The table that follows tells operators of the items that are necessary to do this Service Bulle-
Te 3 f
tin. It does not include tools or materials that are referred to in the Component Maintenance
S 02
Manuals. Prices shown in the table that follows are for a quantity 1 of each part.
SL -2
NOTE: When parts are to be marked with a tracking number, you must not change
er eb
the part number.
New Part Number Qty. nd 3-F
Keyword Old Part Number Instructions/ IC New Part
Per Disposition Price
)u 1
Unit $US
up on
and
(G Ki
which includes
rlin Y
which include
So wnlo
Subassembly
of ntia
which includes:
N/A 1 ....Cross Bolt 201587602 Add tracking 01 -
ide
SERVICE BULLETIN
New Part Number Qty. Keyword Old Part Number Instructions/ IC New Part
se
Per Disposition Price
ns e u
Unit $US
itio siv
201587610 1 ....Cross Bolt 201587602 New parts with 01 -
nd clu
(Pintle Pin) serial numbers
Co ex
201587611 1 ....Cross Bolt 201587608 01 -
(Pintle Pin)
s & the
N/A 2 ....Ferrule P337871 New parts -
rm or
2 ....Sleeve P312894 -
Te 3 f
1 ....Bowden Cable P337861 -
S 02
Retraction Actuator (114193 or 201590 Series)
SL -2
er eb
114193009 1 Retraction 114193008 New production 01
Actuator nd 3-F
N/A 1 Retraction 114193008 In service mark 01
)u 1
Actuator
(G Ki
or number
rlin Y
serial number
rn d b
serial number
A321-100 (201685 Series) Main Landing Gear Complete
ina Do
which includes -
Ch l -
Dressings, LH number
201585006 1 .MLG and 201585006 01
ide
Dressings, RH
nf
which include
Co
SERVICE BULLETIN
se
New Part Number Qty. Keyword Old Part Number Instructions/ IC New Part
Per Disposition Price
ns e u
Unit $US
itio siv
N/A 1 ....Cross Bolt 201587602 Add tracking 01 -
nd clu
(Pintle Pin) number
Co ex
N/A 1 ....Cross Bolt 201587608 Add tracking 01 -
(Pintle Pin) number
s & the
or
rm or
201587208 1 ...Bolt 201587207 New 01 603.62
Subassembly subassembly
Te 3 f
which includes:
S 02
SL -2
201587610 1 ....Cross Bolt 201587602 New parts with 01 -
(Pintle Pin) serial numbers
er eb
201587611 1 nd 3-F
....Cross Bolt 201587608 01 -
(Pintle Pin)
)u 1
2 ....Sleeve P312894 -
ro m
(G Ki
Actuator
Ai y:
rn d b
Actuator
N/A 1 .Pin 114193637 Add tracking 01
ina Do
or
- number
201590900 1 .Pin 114193637 New part with 01 1826.52
Ch l -
serial number
of ntia
or number
nf
serial number
SERVICE BULLETIN
New Part Number Qty. Keyword Old Part Number Instructions/ IC New Part
se
Per Disposition Price
ns e u
Unit $US
itio siv
A321-200 (201584 Series) Main Landing Gear Complete
nd clu
201585001 1 .MLG and 201585001 Mark strike 01
Co ex
Dressings, LH number
s & the
201585002 1 .MLG and 201585002 01
Dressings, RH
rm or
which include
Te 3 f
201587001 1 ..MLG Leg, LH 201587001 Ref only 01
S 02
201587002 1 ..MLG Leg, LH 201587002 01
SL -2
A321-200 (201659 Series) Main Landing Gear Complete
er eb
201585003 1 .MLG and nd 3-F 201585003 Mark strike 01
Dressings, LH number
)u 1
Dressings, RH
ro m
which include
(G Ki
Subassembly
rn d b
which includes:
N/A 1 ....Cross Bolt 201587602 Add tracking 01 -
he e
ut ad
or
201587208 1 ...Bolt
-
201587207 New 01 603.62
Ch l -
Subassembly subassembly
of ntia
which includes:
ide
SERVICE BULLETIN
se
New Part Number Qty. Keyword Old Part Number Instructions/ IC New Part
Per Disposition Price
ns e u
Unit $US
itio siv
N/A 2 ....Ferrule P337871 New parts -
nd clu
2 ....Sleeve P312894 -
Co ex
1 ....Bowden Cable P337861 -
s & the
Retraction Actuator 114193 or 201590 Series
rm or
114193009 1 Retraction 114193008 New production 01
Te 3 f
Actuator
S 02
N/A 1 Retraction 114193008 In service mark 01
Actuator strike number
SL -2
er eb
201590002 1 Retraction 201590002 01
Actuator
nd 3-F
N/A 1 .Pin 114193637 Add tracking 01
)u 1
or number
up on
serial number
(G Ki
or number
rlin Y
serial number
rn d b
Dressings, LH number
So wnlo
which include -
Ch l -
Dressings, LH number
Co
SERVICE BULLETIN
New Part Number Qty. Keyword Old Part Number Instructions/ IC New Part
se
Per Disposition Price
ns e u
Unit $US
itio siv
201522003 1 ..MLG Leg, LH 201522003 Ref only 01
nd clu
201522004 1 ..MLG Leg, LH 201522004 01
Co ex
which includes
s & the
N/A 1 ...Bolt 201587207 Ref Only -
Subassembly
rm or
which includes:
Te 3 f
N/A 1 ....Cross Bolt 201587602 Add tracking 01 -
S 02
(Pintle Pin) number
SL -2
N/A 1 ....Cross Bolt 201587608 Add tracking 01 -
er eb
(Pintle Pin) number
or nd 3-F
201587208 1 ...Bolt 201587207 New 01 603.62
)u 1
Subassembly subassembly
up on
which includes:
ro m
2 ....Sleeve P312894 -
he e
Actuator
-
N/A 1 Retraction 114193008 In service mark 01
Ch l -
Actuator
nf
or number
201590900 1 .Pin 114193637 New part with 01 1826.52
serial number
N/A 1 .Pin 114193610 Add tracking 01
or number
SERVICE BULLETIN
se
New Part Number Qty. Keyword Old Part Number Instructions/ IC New Part
Per Disposition Price
ns e u
Unit $US
itio siv
201590901 1 .Pin 114193610 New part with 01 2883.85
nd clu
serial number
Co ex
C. Tooling
s & the
(1) None.
rm or
3. Accomplishment Instructions
Te 3 f
The figure/item numbers in parentheses in the text agree with those that are in the illustrated
S 02
parts list. Only the primary figure/item numbers are used. The Process Specifications (M-DLPS
SL -2
and PCS) are in the Standard Practices Manual.
er eb
A. Procedure: refer to Table 1 and Figures 1 to 6.
nd 3-F
NOTE: This procedure is only applicable to the parts listed in Table 1 of this Service
)u 1
Bulletin.
up on
NOTE: All the parts that are installed to a Line Replaceable Unit (LRU) that are
included in this Service Bulletin must have a tracking number marked before
ro m
installation.
(G Ki
(1) Identification of in-service parts in a Line Replaceable Unit (LRU) (refer to Figure 1)
es ang
(a) The composition of the tracking number, based on the LRU part number and LRU
rlin Y
serial number, makes sure that it is unique to each part and that the tracking
Ai y:
from the Leg and Dressings LRU, part number 201375011, serial number
ut ad
follows:
1 S - for tracking number.
ina Do
2 -
75 - are the fifth and sixth digits of the nine digit part number of the LRU from
which the part has been removed.
Ch l -
of ntia
3 11 - are the last two digits of the nine digit part number of the LRU from
which the part has been removed.
ide
5 2 - this is the extension number, which is only applicable if there is more than
one of the same part installed to a LRU: refer to Figure 1.
(c) Mark the tracking numbers on the applicable parts; refer to para (4).
SERVICE BULLETIN
(2) Identification applicable to operators of in service parts held as spares and not installed
se
in a LRU.
ns e u
(a) The composition of the tracking number for a part that is held as a spare uses the
itio siv
three letter code of the operator. This makes sure that the tracking number is
unique to each part and that it can be allocated by the operator. As an example
nd clu
for a part held as a spare by Air France (S AFR 1) the tracking number is made as
Co ex
follows:
s & the
1 S - for tracking number.
2 AFR - is three letter operator code.
rm or
Te 3 f
3 1 - Unique sequence number supplied by the operator.
S 02
NOTE: The supply of different sequence numbers by operators
makes sure that tracking numbers are not duplicated for
SL -2
parts with the same part number.
er eb
(b) Mark the tracking numbers on the applicable parts: refer to para (4).
nd 3-F
(3) Identification applicable to non-operators (Repair and overhaul centres) of in service
)u 1
(a) The composition of the tracking number for a part that is held as a spare uses a
ro m
is made as follows:
rlin Y
(4)
-
Procedure to mark the tracking number on the part
Ch l -
(a) Refer to Table 1 and Figure 4 and mark the tracking number on the parts
of ntia
(b) Remove the protective treatment, where applicable either locally or fully.
nf
(c) Mark the new tracking number on the parent metal, where applicable: refer to
Co
PCS-6000-05.
(d) Apply the applicable protective treatments.
(e) Mark the tracking number on the paint where applicable: refer to PCS-6000-07.
SERVICE BULLETIN
(5) Where the complete life history of a part is not known, reference should be made to
se
Airbus Airworthiness Limitations Section (ALS). The ALS provides the means to
ns e u
manage such parts and how to calculate the used life of individual components.
itio siv
B. Identification
NOTE: When it is necessary to replace the identification nameplate mark the
nd clu
replacement nameplate with all the applicable data: refer to PCS-6000-05.
Co ex
(1) After you have done this Service Bulletin:
s & the
NOTE: All parts must be marked with the appropriate new tracking number
before the strike number can be claimed.
rm or
- cancel the strike number 4 on the A321-200, 201585 series main landing gear leg
Te 3 f
and dressings nameplate: refer to M-DLPS1006-5 and cancel like this 4 .
S 02
- cancel the strike number 14 on the A321-200, 201523 series main landing gear leg
SL -2
and dressings nameplate: refer to M-DLPS1006-5 and cancel like this 14 .
er eb
- cancel the strike number 14 on the A321-100, 201387 series main landing gear leg
nd 3-F
and dressings nameplate: refer to M-DLPS1006-5 and cancel like this 14
- cancel the strike number 1 on the A321-200, 201590 series retraction actuator
)u 1
- cancel the strike number 7 on the A321-100, 114193 series retraction actuator
ro m
- write the Service Bulletin number 201-32-29 in the applicable aircraft and landing
gear records
es ang
- raise the appropriate documents (log cards) to record and track the lives of the
rlin Y
- record the parts to which you have allocated tracking numbers on the proforma in
rn d b
(2) Record and track the life accumulation of parts listed in Airbus Airworthiness
ut ad
(a) Refer to Airbus Airworthiness Limitations Section (ALS), operators must record in
the aircraft and landing gear records:
ina Do
1 -
The part number and tracking number of each part.
Ch l -
NOTE: While the tracking number will use the identity of its LRU, the
ide
life used and the life remaining may not be the same as for the
LRU. Refer to the rules given in Airbus Airworthiness
nf
SERVICE BULLETIN
Tracking Number Marking Specification, Location and Protective Treatments
se
Table 1
ns e u
Part No. Name Marking Location Protective treatment
itio siv
201587602 Cross Bolt PCS-6000-07 Mark the tracking Cadmium Plate
nd clu
PCS-6000-05 or number adjacent to PCS-2141
Co ex
PCS-6000-04 the part number. Paint PCS-2500
s & the
201587608 Cross Bolt PCS-6000-07 Mark the tracking Cadmium Plate
PCS-6000-05 or number adjacent to PCS-2141
rm or
PCS-6000-04 the part number. Paint PCS-2500
Te 3 f
114193610 Pin PCS-6000-07 Mark the tracking Cadmium Plate
S 02
PCS-6000-05 or number adjacent to PCS-2141
PCS-6000-04 the part number. Paint PCS-2500
SL -2
er eb
114193631 Pin PCS-6000-07 Mark the tracking Cadmium Plate
nd 3-F
PCS-6000-05 or number adjacent to PCS-2141
PCS-6000-04 the part number. Paint PCS-2500
)u 1
-
Ch l -
of ntia
ide
nf
Co
SERVICE BULLETIN
se
ns e u
itio siv
nd clu
Co ex
s & the
rm or
Te 3 f
S 02
SL -2
TRACKING No. S 8 5 0 1 M D G 1861 2
er eb
nd 3-F
)u 1
up on
2nd OF 2
IDENTICAL
ro m
PARTS
(G Ki
INSTALLED
IN THE UNIT
es ang
rlin Y
Ai y:
rn d b
he e
ut ad
So wnlo
A321A2073-1
ina Do
-
Ch l -
of ntia
ide
nf
Co
SERVICE BULLETIN
se
ns e u
itio siv
nd clu
Co ex
s & the
rm or
Te 3 f
S 02
SL -2
PINTLE PIN
er eb
nd 3-F
)u 1
up on
ro m
(G Ki
A
es ang
CROSS BOLT
201587602
rlin Y
CROSS BOLT
201587608
Ai y:
rn d b
CROSS BOLT
SUBASSEMBLY
he e
201587207
ut ad
So wnlo
ina Do
DETAIL A
-
Ch l -
of ntia
ide
nf
A321A0676-1
Co
SERVICE BULLETIN
se
ns e u
itio siv
nd clu
Co ex
s & the
rm or
Te 3 f
S 02
SL -2
er eb
MARK TRACKING MARK TRACKING
NUMBER HERE NUMBER HERE
nd 3-F
)u 1
up on
ro m
(G Ki
es ang
rlin Y
Ai y:
rn d b
he e
ut ad
So wnlo
ina Do
-
Ch l -
of ntia
ide
A321A0677-1
nf
Co
SERVICE BULLETIN
se
ns e u
itio siv
nd clu
Co ex
PIN
s & the
114193610
(REFER TO FIGURE 5)
rm or
Te 3 f
S 02
SL -2
er eb
nd 3-F
)u 1
up on
ro m
(G Ki
es ang
rlin Y
Ai y:
rn d b
he e
ut ad
So wnlo
PIN
ina Do
114193631
or -
Ch l -
114193637
(REFER TO FIGURE 6)
of ntia
A321A0678-1
ide
nf
Co
SERVICE BULLETIN
se
ns e u
itio siv
nd clu
Co ex
s & the
rm or
Te 3 f
S 02
SL -2
er eb
MARK TRACKING
NUMBER HERE nd 3-F
A321A1629-1
)u 1
up on
ro m
Figure 5
es ang
rlin Y
Ai y:
rn d b
he e
ut ad
So wnlo
ina Do
-
Ch l -
of ntia
ide
MARK TRACKING
NUMBER HERE
nf
Co
A321A1630-1
SERVICE BULLETIN
4. Messier-Dowty and Messier Services Contacts
se
A. Refer to the Messier-Dowty website (messier-dowty.com) for the latest list of contact names,
ns e u
addresses and numbers..
itio siv
Original Equipment Manufacturers
nd clu
Messier-Dowty Inc. Messier-Dowty Limited Messier-Dowty SA
574 Monarch Avenue Cheltenham Road Zone Aeronautique L. Breguet
Co ex
Ajax, Ontario Gloucester BP10
s & the
L1S 2G8 GL2 9QH 78142 Velizy Cedex
CANADA ENGLAND FRANCE
rm or
Tel: 905-683-3100 Tel: +44(0)1452 712424 Tel: +33 146 29 18 00
Te 3 f
Fax: 905-683-6936 Fax: +44(0)1452 713821 Fax: +33 146 29 8770
S 02
Technical Assistance and Spares Support Centers (TASSC)
SL -2
Messier-Dowty TASSC
er eb
Zone Aeronautique L. Breguet
BP10 nd 3-F
78142 Velizy Cedex
)u 1
FRANCE
up on
Email: mdtassc@messier-dowty.com
es ang
Messier Services (Asia) Pte. Ltd. Messier Services R&O Facility - HYDREP Aéroport de
ina Do
R&O Facility
21 Loyang Crescent,
Americas
Av. La Noria
- Dinard-Pleurtuit-Saint-Malo
Bâtiment 20
Ch l -
SERVICE BULLETIN
se
ns e u
APPENDIX A
itio siv
1. Messier-Dowty Limited tells operators or repair and overhaul centres, that a record will be kept of
nd clu
the parts listed in the Airbus Airworthiness Limitations Section (ALS). Information on the parts to
which you have allocated a tracking number, must be returned to Messier-Dowty Limited on the
Co ex
attached proforma.
s & the
2. Messier-Dowty Limited tells you that they will maintain a Database which contains information on
the parts to which you have given a tracking number.
rm or
Te 3 f
3. Messier-Dowty Limited tells you that they are not able verify that such tracking numbers are
marked on the parts which are listed in that database. Messier-Dowty Limited can only tell you
S 02
that they have received a report of such an event from an operator or repair and overhaul centre.
SL -2
er eb
4. Each operator is responsible for the tracking of the ALS listed parts in-service. Each operator is
responsible for the lifing record of the part removed from its aircraft. Each operator is also given
nd 3-F
full lifing data on any part fitted to its aircraft.
)u 1
5. Messier-Dowty Limited tells you that the attached proforma must be returned to Messier-Dowty
up on
B. The part number of the part to which you have given a tracking number.
es ang
E. The MSN of the aircraft from which the part has been removed.
rn d b
Cheltenham Road,
nf
Gloucester,
Co
GL2 9QH,
England.
Telephone 44 0 1452 712424.
Fax 44 0 1452 711054
Appendix A
Service Bulletin No. 201-32-29
May 1/2004 Page 1 of 2
Dec 5/2008 (Revision 1)
Messier-Dowty Ltd
SERVICE BULLETIN
NAME OF OPERATOR OR REPAIR/OVERHAUL CENTRE:.........................................................
se
ns e u
Part Tracking MSN of the MSN of the Flight Flying Date of
itio siv
Number Number aircraft in aircraft from Cycles Hours since marking
nd clu
which part which part since new new
will be is removed
Co ex
installed
s & the
rm or
Te 3 f
S 02
SL -2
er eb
nd 3-F
)u 1
up on
ro m
(G Ki
es ang
rlin Y
Ai y:
rn d b
he e
ut ad
So wnlo
ina Do
-
Ch l -
of ntia
ide
nf
Co
Appendix A
Service Bulletin No. 201-32-29
Dec 5/2008 (Revision 1) Page 2
Messier-Dowty Ltd
CAGE: K0654
Cheltenham Road, Gloucester, GL2 9QH, England
Telephone: +44 (0) 1452 712424 Fax: +44 (0) 1452 713821
SERVICE BULLETIN
se
ns e u
A321 MAIN LANDING GEAR
itio siv
SERVICE BULLETIN 201-32-29
nd clu
TRANSMITTAL LETTER FOR REVISION 1
Co ex
DATED DEC 5/2008
s & the
1. REASON
A. Para.1. D. (9) and (11) clarification of actions and MSN details.
rm or
Te 3 f
B. CMMs added to para 1.J.
S 02
C. Materials list reformatted and prices added.
SL -2
D. Add name of operator or repair/overhaul center to Appendix A proforma.
er eb
2. ACTION
A.
nd 3-F
Remove and destroy existing pages 1 to 14 and substitute revised pages 1 to 20 dated Dec
5/2008.
)u 1
B. Remove and destroy Appendix A existing pages 1 and 2 and substitute revised pages 1 and
up on
-
Ch l -
of ntia
ide
nf
Co
Co
nf
ide
of ntia
Ch l -
ina Do
Messier-Dowty Ltd
So wnlo
ut ad
he e
rn d b
Ai y:
rlin Y
es ang
(G Ki
ro m
up on
)u 1
-
nd 3-F
er eb
SL -2
INTENTIONALLY BLANK
S 02
Te 3 f
rm or
s & the
SERVICE BULLETIN
Co ex
nd clu
itio siv
ns e u
se