Professional Documents
Culture Documents
View 1-1: Scale 1:25
View 1-1: Scale 1:25
overlap
1250 mm
1
200 200 200 200 200 216 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200
159 341
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 NOTES:
40 Clear Cover 1. All dimensions are in millimeters unless otherwise specified.
2. Grade of the concrete shall be M35.
3. Grade of the reinforcement steel shall be Fe 500 conforming to IS: 1786-2008.
312
1 1
6. Allowable maximum aggregate size is 20 mm.
388
7. When bars of two different diameters are to be coupled, the lap length shall be calculated on the basis of
diameter of the smaller bar.
8. Only 50% of the bars shall be coupled at any particular cross section and another 50% of bars shall be at 1.3
500 times the lap length calculated.
5
9. As per above IS code (Technical specifications) referral and design aspect, considering the staggering on
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 coupling/lapping = 50D.
4
6 Spiral bar 12Ø @120 C/C
10. Diameter of anchor hole is 152mm and the Diameter of outer PVC pipe is 200mm
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
11. Anchor Hole of PVC pipes should be 200mm outer diameter with class 3 or 4 (thickness of 8mm to 10mm)
1
200 200 200 200 431 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 model inside the Waller beam.
12. Waler beam reinforcement around PVC pipe can be adjusted as per site requirement.
13.Stirrups spacing shall be maintained as per design and shall be adjusted at anchor location to
12000 suit site condition.
12000
Used codes to create the Reinfrocement plans:
overlap 1. IS 456(2000):Plain and Reinforced Concrete-Code of Practice.
1 7 Ø 25 L= 12000 1 7 Ø 25 L= 12000
1250 mm 2. IS 2911-1-2: Design and Construction of Pile Foundations—Code of Practice.
3. SP 16(1980):Design Aids for Reinforced Concrete.
2 Detail section
M 1:25
4 1 Ø 16 / 200 L = 2090
3
159 341 300
overlap overlap overlap
1250 mm 1250 mm 1250 mm
4
R6
40 Clear Cover
0
300
31
520
300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200
0
31
312
240
15
620
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
2
700
1 420
340
15 420
388
250
250
420 15
3 1 Ø 16 / 200 L = 2290
500 420
5
5 1 Ø 16 / 200 L = 1640
4
6 Spiral bar 12Ø @ 60 C/C
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300
12000
12000
1 7 Ø 25 L= 12000
overlap 1 7 Ø 25 L= 12000 overlap overlap
1250 mm 1250 mm 1250 mm
3
overlap
1250 mm
200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200
300
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200 200 200 300 200 200
2m 1 0 1
M 1:25
12000
1 7 Ø 25
12000
L= 12000 overlap
1250 mm
793
1 7 Ø 25 L= 12000 2056 1015 ± 0,00 =
ALL DIMENSIONS AND SERVICES
HAVE TO BE CONFIRMED ON SITE !
CHANGE DESIGNED BY SITE ENGINEER DATE INDEX
Initial creation of the waler reinforcement G. D'AlessandroPurushothaman Y. 02.01.2023 -
waler reinforcement stirrups spacing changed. G. D'Alessandro Purushothaman Y. 13.01.2023 A
changed waler beam reinforcement stirrups spacing Ramakrishnan.RPurushothaman Y. 29.03.2023 B
Revised as per NHPC commands Ramakrishnan.RPurushothaman Y. 27.04.2023 C
Revised as per client's comments vide letter no: Ramakrishnan.RPurushothaman Y. 26.06.2023 D
JAL/T-VI/2023/1517
4 THIS DRAWING IS UNDER COPYRIGHT AND IS NOT TO BE COPIED OR PRESENTED TO UNAUTHORIZED PARTIES WITHOUT SPECIAL PERMISSION:
PROJECT DRAWING
NO.: NO.: T 21 01 05 113 D