Professional Documents
Culture Documents
MEC105B TEST 01 July 2021
MEC105B TEST 01 July 2021
YEAR: 2021
SEMESTER: 1
ONLINE TEST: 1
DATE OF ASSESSMENT: 17 / 07 / 2021
SUBJECT NAME: MECHANICS
SUBJECT CODE: MEC105B
QUALIFICATION(S): B.Eng: MECHANICAL ENGINEERING
B.Eng: MECHATRONICS ENGINEERING
B.Eng: INDUSTRIAL ENGINEERING
B.Eng: POLYMER ENGINEERING
EXAMINER(S): Mr. JCS FWAMBA
MODERATOR(S): Mr. CC OOSTHUIZEN
TOTAL MARKS: 70 TOTAL NUMBER OF PAGES INCLUDING COVER PAGE:
FULL MARKS: 70 TOTAL NUMBER OF ANNEXURES:
PAPER DESCRIPTION: ONLINE DURATION: 180 min
SUBMISSION
SPECIAL REQUIREMENTS
NONE
NON-PROGRAMMABLE POCKET CALCULATOR
SCIENTIFIC CALCULATOR
COMPUTER ANSWER SHEET
GRAPH PAPER
DRAWING INSTRUMENTS
OPEN BOOK
QUESTION 1
When the load L is 8.5 m from point C, the tension T in the cable has a magnitude of 8.5 kN.
Express T as a vector using the unit vectors i and j.
Assume a = 8.5 m, b = 4 m, c = 6.3m
[11]
QUESTION 2
Determine the resultant R (single equivalent force) of the three forces acting on the simple truss.
Specify the points on the x- and y-axes through which R must pass.
[16]
JULY 2021/MEC105B
-2–
QUESTION 3
The turnbuckle is tightened until the tension in the cable AB equals 2.7 kN. Determine the vector
expression for the tension T as a force acting on member AD. Also find the magnitude of the
projection of T along the line AC.
[13]
QUESTION 4
The chain binder is used to secure loads of logs, lumber, pipe, and the like. If the tension T 1 is 2
kN when θ = 28°, determine the force P required on the lever and the corresponding tension T 2
for this position. Assume that the surface under A is perfectly smooth.
Assume a = 110 mm, b = 590 mm.
[10]
JULY 2021/MEC105B
-5-
QUESTION 5
The uniform rectangular plate of mass m is suspended by three cables. Determine the tension in
each cable.
[20]
JULY 2021/MEC105B
FACULTY OF ENGINEERING AND THE BUILT ENVIRONMENT
EXAMINATION DATE:
(For Office Use Only)
Examiner Moderator
Name Mr JCS FWAMBA Mr CC OOSTHUIZEN
Campus
Pretoria Pretoria
(If Applicable)
JULY 2021/MEC105B
-1-
QUESTION 1
JULY 2021/MEC105B
-2-
QUESTION 2
JULY 2021/MEC105B
-3-
QUESTION 3
JULY 2021/MEC105B
-4-
QUESTION 4
JULY 2021/MEC105B
-5-
QUESTION 5
JULY 2021/MEC105B