Sansi\sui’s AU/TU Series of stereo in.
d amplifiers and stereo FM/AM
has received the highest praise,
s gathered the most devoted fol-
of auciophiles, of any series of
delity components we have ever
xctured, Since its. introduction
van a decade ago, the series has
represented not only the latest
ast advanced technical develop:
‘and applications in the industry
0 the finest in user-oriented con:
2es and design innovations,
this brochure we are proud to in.
the latest in the Sansul AU/TU
They are the most powerful,
ccurate, most dependable stereo
nents yet to join the series, and
present at the very highest pro:
al level the famed Sansui tonal
standards in every respect.
AU20000
AMPLIFIER
HIGH-OUTPUT, LOW-DISTORTION
CIRCUITRY
The AU-20000 is the most powerful
integrated amplifier in Sansur’s dis
tinguished AU Series. Its constant and
reliable power output is @ cotinuous 170
watts, min. RMS,. per channel, both
channels driven into 8 ohms, over a 20
Hz to 20kHz bandwidth with no more
than 0.053 total harmonic distortion.
POWERFUL TRIPLE PUSH-PULL
OUTPUT CIRCUIT DESIGN
‘No lass than six hand-selected power
transistors are used in each output chen-
nel. The triple push-pull circuitry here is
guaranteed to deliver its rated output at
the lowest possible distortion—power to
spare, always.
DEPENDABLE POWER SUPPLY
Particularly close attention is peid
to the power supply design to ensure de-
pendability and stability. The circuit is
the plus-minus symmetrical voltage type,
coupling a low-magnetic-leakage toroidal
transformer with extra large capacitors.
DUAL-AMPLIFIER PHONO EQUALIZER
WITH LOW-NOISE TRANSISTORS
Dynamic response is improved by
the S-transistor equalizer with differ-
ential amplifies at its initial stages. Di
tortion is totally minimized, and the dual
amplifier design—a CR type for highs and
a NF type for lows achieves very ac
curate RIAA equalizetion.
‘TRIPLE TONE CONTROLS
‘The AU-20000 features Sansui's ex
clusive Triple Tone Control design, con-
trolled by a CR type circuit. A wide dy-
namic range and excellent transient re-
sponse are assured by the use of a plus-
COMPLETE TRIPLE PROTECTION
CIRCUITS
Damage and breakdowns are avoid-
ed entirely with the use of a temperature
sensing circuit, a DC voltege detection
circuit and an ASO (Area of Safety Oper
ation) detection circuit. Shorts in speak
er terminals of leads, or power/tempera-
ture emergencies instantly activate these
circuits for complete protection.
SELECTABLE PHONO SENSITIVITY)
IMPEDANCE
‘The phono input circuitry in the AU-
20000 incorporates two special selec-
tors, each with three positions, to allow
the selection of the correct sensitivity
and impedance to obtain optimum results,
with any cartridge in use.
VERSATILE TAPE MONITOR CIRCUIT
‘The AU-20000 accepts up to three
stereo tape decks and provides individual
monitoring and deck-to-deck dubbing for
each. It also permits source monitoring
during the dubbing process,
OTHER USER-ORIENTED FEATURES
Provided are: Tone Defeat Switch;
3-Step Audio Muting Swich; 2-Step Low)
High Filters; Mode Switch; Meter Sen:
tivity Switch, and Large, Self-lluminated
Level Meters,SPECIFICATIONS
‘Min. RMS, both channels driven, trom 20 20
20,000H with no more than 0.08% total harmonic
‘ietortion
ts per channel into 4 and ohms
Der chennel into 16 ohms
LoaD MPEDANCE’ s, 8 and is chme
POWER BANDWIDTH" 20 t920.000H at or below
ted min. Rs power up
‘min, RMS power output and fotal
ermontesietorton
INTERMODULATION DISTORTION.
(Gonz: 7.000221 SMPTE METHOD)
‘GVERALL from AUD tess than 0.03% a rated
RMS power output
RIAA CURVE DEVIATION (PHONO)
9.268, 0.268 (3010 15,0008)
(CHANNEL SEPARATION (at rated output 1,000H2)
PHONG. bettor an S80)
PHONG 2
TUNER
Ue better than 6008
POWER AMPLIFIER
“Tare MontTOR better then Code
HUM AND NOISE CHF)
PHONO 1 batter then 7030,
PHONG 2 better hen 7oaB
TUNER better than Bove
Aue Detter than £036
Power Aupuirien
Detter then 1005)
TAPE MONITOR better than 8048
INPUT SENSITIVITY AND IMPEDANCE
Wr00Hs, for rated output)
PHONO 1 smy, amy, mv,
Sov onme, 96 ohme, 100% onms
PHONO2 1 smv.3mv, 6mv 80k onme
MAXcINPUT CAPABILITY
tore than 350mV RMS at 0.05%
sistortion
tuner Y3omV BOK onme
Aux. 130mv Bok anme
TAPE PLAYBAGK:I T3OmV (PIN)
TAPE PCAYBAGK.2. 130mW {PIN}, 120m (OIND
TAPE PLAYBAGK:S 130mV (PIN)
RECORDING OUTPUT
‘TAPE 1 T30my (pin)
Tae? 130m (PIN, 3omv coin)
Tapes T30mv (PIN)
CONTROLS
BASS 108 at 20412
MORANGE 5a at 1.500H
TREBLE =TouB at 20,0002
FILTERS
tow 8 202 1268/0)
PAH 2aB/oct)
wich t 7k (64/08)
= 348 at 12kris 12407000)
murine oda, ~ ode, 30a.
POWER REQUIREMENTS.
‘POWeH VOLTAGE, 100, 12
DIMENSIONS 46ommagicoW
ammo n
‘00mm (13309
wei 22 ke 45.8 bs) Net
25.8ieg (500 lbs) Packed
Au.11000,
POWER OUTPUT:
Min. RAS. both channels devon, from 200
2o,000Hr with so move than 0.68% ‘otal ermonic
‘Siatortion
110 watts ser channel into 4 and ohms
LOAD IMPEDANCE: ‘and eonms
POWER BANDWIDTH" 20 to 20,000Hz at or below
Fated min. AMS power outoUt ans
‘ote! harmonic distortion
TOTAL HARMONIc DISTORTION
‘OVERALL (rom AUX) less tha 0.088 at oF below
tea min. RMS power output and
‘ots harmonic distortion
INTERMODULATION DISTORTION.
(ove? 000M | SMPTE METHOD)
‘SVERRALL fram AU Tes than 0 Dat rate
RMS power autput
FREQUENCY RESPONSE {ot | watt)
‘OVERALL (AUX te power output)
Téte.89 000N8 +008,
RIAA CURVE DEVIATION (PHONO)
$0.38, ~0:348 {30 to 15.0004)
(CHANNEL SEPARATION (xt rated output 1:000%)
PHONO belterthan S848
198
PHONO 2 better than Soa
TUNER Better than 6038,
AURI-2 better han 60g,
Power Aupuirien
Detter than 70d
“TAPE MONITOR better han GOB
HUM AND NOISE (IH)
PHONO 1 better then ssa
PHONO? Better than 8a
TUNER Detter then Boas
AUK,2 | better than Boa,
ABNER AMPLIFIER
‘better than 10040,
TAPE MONITOR better than Boge
INPUT SENSITIVITY AND IMPEDANCE
{U.000He. for rated output
inv ar, Brn
SD hens, 8x ohms, 100k ohms
‘mace than 200m RMS at 0.1%
Sietortion
AUX2,2 130m" S0Wohums
TAPE PLAYBACK 1 130m (PIN)
TAPE PLAYBACK 2 130m¥ (PIN, 130mV (DIN)
TONER 130mv 80k ohms
RECORDING OUTPUT
TAPE? Tomy pin)
TAPES 130m¥ (Pind, 3omy (O1N)
conti
‘Ase + 1049, — 1098 at 0142
Mionance — }508,"- sap.
TONE SELECTORS
Bass 0Hz, 00H, 6002
TRESLe = 2his, awit ah?
FILTERS
tow’ 348 at 20112 (1248/0c8)
~368 at orks (1298/1)
Rich —SaB St Yate (baB/oed
murine
LEVEL Ser odB, -i0ds, 2088
POWER REQUIREMENTS.
POWER VOLTAGE. 100, 120,220, 240 S0/60H2
POWER CONSUMPTION
RATED 24d watts
DIMENSIONS 46a mmlsinW
igo mmiet/aeH
Bamm 14/60) 0
wei Tg uata25 ibd Net
216g (47 6lbs) Packed
‘Av9900
Power oureur®
0 watts par channel int
LOAD IMPEDANCE: 1 saa S onme.
POWER BANDWIDTH" 7010 0,000
nd total harmon
‘TOTAL HARMONIC DISTORTION®
‘OVERALL om AUX! less than 3
‘ated min. AMS
INTERMODULATION DISTORT
‘Gone 7 o00rt at SMPTE MET
‘OVERALL tram AUX) le than
RMS power out
FREQUENCY RESPONSE {at Iwo!
‘OVERALL (AUX to pewar outout)
“oto 20.0008 +
RIAA CURVE DEVIATION (PHONO)
“10.348. -0'5¢8
CHANNEL SEPARATION (at rate:
PHONO 1 better than 5848
PHONO 2 better than 880
TUNER Better than ose |
AUX? better than 6098.
Powel aMPLirien.
Detter than 7048 |
TAPE MontToR better than 60¢3
HUM AND NOISE (iF)
PHONO 1” bettor man
PHONO? better than 6508
‘TONER, Detter han 8048,
AUK? Better hon 8036,
Powe aMPLiFien
‘better than 10008
TAPE MONITOR better then 8008
INPUT SENSITIVITY AND IMPEDAT
(G,000r1, for rate output)
PHONG Dm, amv, omy
Sok ones, Sok ober
PHONO? amv Sokahme
MAX-INPUT CAPABILITY
‘ore than 300mV f
Sletorton
‘Tuner 130mY" 80K ohms
AUKIL2 | 1S0mv SOK ohms
Tape PLay oxck 1 130m (PIN)
TAPE PLAY BACK 2 130mV(PIN} 1
RECORDING OUTPUT
Tape? Tomy PIN)
Tape 2 130m (PIN), 30m,
coNTROLS
Bass ‘1048, _ 1048
MipRAKGE al .
TREBLE io
ONE SELECTORS.
ease 130M, 200H, 600
Reale -?aHe ak, Skits
FILTERS
tow 348 at 20H2 126
368 at Gone C20
nich Tee a 7s (608
ae st lakes (12.
murine 038, 2038.
UEVELSET cae: _iod8, 2041
POWER REQUIREMENTS
POWER VOLTAGE” 100, 120, 220,26
POWER CONSUMPTION.
RATED 10 watts
mensions 40mm ieyoW
weirs Ie0Kg (39,7 bo Ne
203 ke asib
BANSL
x
h
“Power specifications measured purse
Federal Trade Commission trade rom
‘ower output claims amplifiers