Professional Documents
Culture Documents
Thru-Tubing Intervention Catalog
Thru-Tubing Intervention Catalog
Thru-Tubing Intervention Catalog
MOTORHEAD ASSEMBLY
(Refer to page 118)
SPECIFICATION GUIDE
Tool Min ID
Standard
OD Circulating Sub Disconnect
Connection
in. mm in. mm in. mm
1.69 42.9 0.44 11.2 0.56 14.1
1" AMMT
1.69 42.9 0.44 11.2 0.56 14.1
2.13 54.1 0.56 14.1 0.68 17.2
1-1/2" AMMT
2.25 57.2 0.56 14.1 0.68 17.2
2.88 73.2 0.68 17.2 0.81 20.4 2-3/8" PAC DSI
3.50 88.9 1.19 30.1 1.31 33.3 2-7/8" PAC DSI
External Connector.
Internal Connector.
Minimum ID sizes specified are maximum piston ID's possible. Smaller ID configurations are
available on request.
Length varies with size and style of Motorhead Assembly utilized.
Motorhead Assembly
Product Family No. H13203
SPECIFICATION GUIDE
Tool Min
Fishing Neck Coiled Standard
OD ID
Tubing OD Connection
in. mm in. mm in. mm
1.44 36.6 0.68 17.3 1.44 36.6 3/4" CS Hydril
1.69 42.9 0.75 19.1 1.69 42.9 1" AMMT
1.00
1.81 46.0 0.75 19.1 1.81 46.0 1" AMMT
2.13 54.1 0.88 22.4 1.38 35.1 1-1/2" AMMT
1.69 42.9 0.75 19.1 1.69 42.9 1" AMMT
1.81 46.0 0.75 19.1 1.50 38.1 1" AMMT
1.25
1-1/4" API Reg
0.81 20.6 1.50 38.1 Coiled Tubing Connector
1-1/2" AMMT Product Family No. H13200
2.13 54.1
0.75 19.1 1" AMMT
1.81 46.0
1.00 25.4 1-1/2" AMMT
2.19 55.6 0.63 16.0 1.81 46.0 1-1/4" API Reg
2.50 63.5 1.00 25.4 1.81 46.0 1.50 1-1/2" AMMT
2.75 69.9 1.00 25.4 2.31 58.7 2-3/8" EU
2.88 73.2 1.12 28.4 2.31 58.7 2-3/8" PAC DSI
3.13 79.5 1.00 25.4 2.31 58.7 2-3/8" API Reg
THRU-TUBING FISHING
2.50 63.5 1.00 25.4 2.31 58.7 1-1/2" AMMT
2.75 69.9 1.00 25.4 2.31 58.7 2-3/8" EU
1.75
2.88 73.2 1.50 38.1 2.31 58.7 2-3/8" PAC DSI
2-3/8" PAC DSI
1.50 38.1
3.13 79.5 2.31 58.7 2-7/8" PAC DSI
1.00 25.4 2-3/8" API Reg
1.78 45.2 2.375" Hydril
2.50 63.5 2.25 60.5
1.00 25.4 1-1/2" AMMT
2.63 66.8 1.00 25.4 2.63 66.8 1-1/2" AMMT
2.88 73.2 1.50 38.1 2.63 66.8 2-3/8" PAC DSI
3.00 76.2 1.75 44.5 2.75 69.9 2.00 2-3/8" EU 8 Rd
1.00 25.4 2-3/8" API Reg
3.13 79.5 2.75 69.9 2-3/8" PAC DSI
1.50 38.1
2-7/8" PAC DSI
3.50 88.9 1.50 38.1 3.13 79.5 2-7/8" PAC DSI
2.88 73.2 1.50 38.1 2.88 73.2 2-3/8" PAC DSI
1.96 49.8 2-3/8" EU 8 Rd
3.13 79.5 3.13 79.5
1.39 35.3 1.900" CS Hydril
2.38
1.00 25.4 2-3/8" API Reg
3.38 85.7 3.13 79.5
1.50 38.1 2-7/8" PAC DSI
4.75 120.7 1.96 49.8 3.13 79.5 3-1/2" API Reg
4.50 114.3 2.95 74.9 4.50 114.3 3.50 3-1/2" EU 8 Rd
SPECIFICATION GUIDE
Tool Tool
Length Standard
OD ID
Connection
in. mm in. mm in. mm
1.44 36.6 0.56 14.2 19.75 501.7 3/4" CS Hydril
1.69 42.9 0.69 17.5 18.13 460.5 1" AMMT
1.81 46.0 0.69 17.5 18.13 460.5 1" AMMT
16.44 417.6 1-1/2" AMMT
2.13 54.1 0.81 20.6
18.07 459.0 1-1/4" API Reg
2.50 63.5 0.81 20.6 16.94 430.3 1-1/2" AMMT
2.88 73.2 1.00 25.4 23.32 592.3 2-3/8" PAC DSI
3.06 77.7 1.00 25.4 18.75 476.3 2-3/8" EU 8 Rd
18.94 481.1 2-3/8" PAC DSI
3.13 79.4 1.00 25.4
18.82 478.0 2-3/8" API Reg
3.50 88.9 1.50 38.1 19.50 495.3 2-7/8" PAC DSI
Dual Flapper Back Pressure Valve
Product Family No. H13204 3.75 95.3 1.00 25.4 33.00 838.2 2-7/8" API Reg
THRU-TUBING FISHING
SPECIFICATION GUIDE
Tool
Min ID Length Standard
Size
Connection
in. mm in. mm in. mm
1.38 34.9 0.31 7.9 14.54 369.3 3/4" Hydril CS
1.69 42.9 0.53 13.5 13.93 353.8 1" AMMT Universal Disconnect
Product Family No. H13209
2.13 54.1 0.69 17.5 14.58 370.3 1-1/2" AMMT
2.88 73.2 0.81 20.6 15.50 393.7 2-3/8" PAC DSI
16.52 419.6 2-7/8" PAC DSI
3.13 79.4 1.00 25.4
20.17 512.3 2-3/8" API Reg
3.50 88.9 1.25 31.8 19.46 494.2 2-7/8" PAC DSI
Minimum ID specified is maximum piston ID possible. Smaller piston ID are available on request.
SPECIFICATION GUIDE
Tool Min
Length Standard
OD ID
Connection
in. mm in. mm in. mm
1.44 36.6 0.47 11.9 20.49 518.9 3/4" Hydril CS
1.69 42.9 0.53 13.5 17.88 454.2 1" AMMT
1.81 46.0 0.53 13.5 17.88 454.2 1" AMMT
2.13 54.1 0.53 13.5 20.90 530.6 1-1/2" AMMT
2.25 57.2 0.47 11.9 23.25 590.2 1-1/2" AMMT
2.50 63.5 0.47 11.9 23.69 601.7 1-1/2" AMMT
2.88 73.2 0.59 15.0 26.75 679.5 2-3/8" PAC DSI
3.13 79.5 0.69 17.5 29.75 753.6 2-3/8" API Reg
3.50 88.9 1.25 31.8 29.75 753.6 2-7/8" PAC DSI
Minimum ID specified is maximum piston ID possible. Smaller piston ID's and different
connections available on special request.
SPECIFICATION GUIDE
Tool Min
Length Standard
OD ID
Connection
in. mm in. mm in. mm
1.69 42.9 0.53 13.5 18.38 466.9 1" AMMT
2.13 54.1 0.69 17.5 20.63 524.0 1-1/2" AMMT
2.25 57.2 0.69 17.5 20.63 524.0 1-1/4" API Reg
2.88 73.2 0.81 20.6 26.00 660.4 2-3/8" PAC DSI
2-3/8" API Reg
3.13 79.5 0.81 20.6 23.00 584.2 2-7/8" PAC DSI
2-3/8" EU 8 Rd
3.38 85.7 0.81 20.6 21.25 539.8 2-3/8" API Reg
Minimum ID specified is maximum piston ID possible. Smaller piston ID configurations are
available upon request.
SPECIFICATION GUIDE
Tool Min Top Sub
Standard
OD ID ID
Connection
in. mm in. mm in. mm
1.69 42.9 0.41 10.3 29.00 736.6 1" AMMT
2.13 54.1 0.44 11.1 34.95 887.7 1-1/2" AMMT
2.88 73.2 0.69 17.4 41.25 1047.8 2-3/8" PAC DSI
2-3/8" API Reg
3.38 85.9 0.75 19.1 55.75 1416.1
2-7/8" PAC DSI
Pull Disconnect
Product Family No. H13214
SPECIFICATION GUIDE
Model FA
Tool Min Top Sub
Standard
OD ID ID
Connection
in. mm in. mm in. mm
2-3/8" EU 8 Rd Box
2-3/8" API Reg Box
3.13 79.5 0.41 10.3 2.13 54.1
2-3/8" EU 8 Rd Box
2-3/8" API Reg Box
2-7/8" EU 8 Rd Box
3.75 95.3 0.44 11.1 2.13 54.1
2-7/8" API Reg Box
Model FAU
THRU-TUBING FISHING
OD ID ID
Connection
in. mm in. mm in. mm
2-3/8" EU 8 Rd Box
2-3/8" API Reg Box
3.13 79.5 0.41 10.3 2.13 54.1
2-3/8" EU 8 Rd Box
2-3/8" API Reg Box
2-7/8" EU 8 Rd Box
3.75 95.3 0.44 11.1 2.13 54.1
2-7/8" API Reg Box
Model HL
Tool Min Top Sub
Standard
OD ID ID
Connection
in. mm in. mm in. mm
2-3/8" EU 8 Rd Box
2-3/8" API Reg Box
3.13 79.5 0.81 20.6 2.31 58.7
2-7/8" EU 8 Rd Box
2-3/8" API Reg Box
2-7/8" EU 8 Rd Box RK Disconnect
3.63 92.2 0.81 20.6 2.31 58.7
2-7/8" API Reg Box Product Family No. H13215
SPECIFICATION GUIDE
Tool Min
Length Standard
OD ID
Connection
in. mm in. mm in. mm
1.44 36.6 0.41 10.4 16.00 406.4 3/4" Hydril CS
1.69 42.9 0.41 10.4 12.56 319.0 1" AMMT
1.81 46.0 0.41 10.4 12.56 319.0 1" AMMT
2.13 54.1 0.56 14.2 14.13 358.9 1-1/2" AMMT
2.38 60.5 0.44 11.2 15.13 384.3 1-1/4" Reg
2.50 63.5 0.56 14.2 14.38 365.3 1-1/2" AMMT
2.88 73.2 0.69 17.5 15.13 384.3 2-3/8" PAC DSI
3.13 79.5 0.69 17.5 16.75 425.5 2-3/8" API Reg
3.50 88.9 1.00 25.4 18.00 457.2 2-7/8" PAC DSI
Minimum ID specified is maximum piston ID possible. Smaller piston ID's and different
connections available on request.
MOTORHEAD ASSEMBLY
(Refer to page 118)
ACCELERATOR
WEIGHT BAR
INDEXING TOOL
(Refer to page 140)
SNIPPER OVERSHOT
HYDRAULIC RELEASE OVERSHOT
(Refer to page 130)
(Refer to page 128)
FEATURES/BENEFITS
• High strength
• Can be used for jarring operations
• Flow path permits washing debris from the top of the fish or profile
• No shear screws
• Design minimizes stress on the grapple section
SPECIFICATIONS
For Slick OD Fish, Product Family No. H13330
Tool
Length Catch Size
OD
in. mm in. mm in. mm
2.13 54.1 19.25 488.0 1.13, 1.25 28.6, 31.8
2.25 57.1 19.25 488.0 1.38 34.9
2.63 66.8 20.94 531.9 1.25, 1.50, 1.75 31.8, 38.1, 44.5
3.00 76.2 24.25 616.0 2.00, 2.13, 2.25 51.8, 54.0, 57.2
3.50 88.9 24.25 616.0 2.25, 2.38, 2.50 57.2, 60.3, 63.5
3.70 94.0 23.62 599.9 2.38 60.3
3.75 95.3 23.62 599.9 2.88 73.0
4.00 101.6 26.88 682.8 2.63, 2.88, 3.00, 3.13 66.7, 73.0, 76.2, 79.4
128
THRU-TUBING FISHING TOOLS Baker Oil Tools
FEATURES/BENEFITS
• Maximum ID on collets or slips
• High tensile strength
• Pump through capabilities
• No shear screws
• Minimized stress on collets or slips
SPECIFICATIONS
For Slick ID Fish, Product Family No. H13310
Tool
Length Catch Range
OD
in. mm in. mm in. mm
1.343 to 1.500 34.1 to 38.1
1.81 46.0 18.40 467.4
1.438 to 1.625 36.5 to 41.3
2.00 50.8 18.40 467.4 1.590 to 1.780 40.4 to 45.2
1.750 to 1.970 44.5 to 50.0
THRU-TUBING FISHING
2.110 to 2.280 53.6 to 57.9
2.70 68.6 22.00 558.8
2.210 to 2.490 56.1 to 63.2
3.00 76.2 24.00 609.6 2.460 to 2.810 62.5 to 71.4 For Slick ID Fish For Fishing Neck
2.794 to 3.080 71.0 to 78.2 Product Family Product Family
3.38 85.9 24.13 612.9 No. H13310 No. H13311
2.900 to 3.190 73.7 to 81.0
3.50 88.9 24.13 612.9 3.125 to 3.375 79.4 to 85.7
SPECIALIZATION GUIDE
Tool Available For CT Size
Length Standard
OD To Be Cut
Connection
in. mm in. mm 1" 1-1/4" 1-1/2" 1-3/4" 2"
1.88 47.7 26.60 675.6 x 1-1/4" CS Hydril Box
2.25 57.1 24.60 624.8 x x 1-1/2" CS Hydril Box
2.63 66.7 23.63 600.2 x x x 1-1/2" CS Hydril Box
3.13 79.5 23.19 589.0 x x x x x 2-7/8" Hydril A-95 Box
3.38 85.8 23.25 590.6 x x x x x 2-7/8" CS Hydril Box
Snipper Overshot
Product Family No. H13334
130
THRU-TUBING FISHING TOOLS Baker Oil Tools
SPECIFICATION GUIDE
Tool Available For CT Size
Length Standard
OD To Be Engaged
Connection
in. mm in. mm 1" 1-1/4" 1-1/2" 1-3/4" 2"
1.88 47.7 24.75 628.7 x 1-1/4" CS Hydril Box
2.25 57.1 24.75 628.7 x x 1-1/2" CS Hydril Box
2.63 66.7 23.63 600.2 x x x 1-1/2" CS Hydril Box
3.13 79.5 23.19 589.0 x x x x x 2-7/8" Hydril A-95 Box
3.38 85.8 23.34 592.8 x x x x x 2-7/8" CS Hydril Box
131
Baker Oil Tools THRU-TUBING FISHING TOOLS
SPECIFICATION GUIDE
Tool Available For CT Size
Length Standard
OD To Be Engaged
Connection
in. mm in. mm 1" 1-1/4" 1-1/2" 1-3/4" 2"
1.88 47.7 16.00 406.4 x 1-1/4" CS Hydril Box
2.25 57.1 15.00 381.0 x x
1-1/2" CS Hydril Box
2.63 66.7 16.38 416.1 x x x
3.13 79.5 14.75 374.7 x x x x x 2-7/8" Hydril A-95 Box
3.38 85.8 12.88 327.2 x x x x x 2-7/8" CS Hydril Box
132
THRU-TUBING ROTATIONAL SERVICES Baker Oil Tools
MOTORHEAD ASSEMBLY
(Refer to page 118)
NON-ROTATING STABILIZER
(Refer to page 153)
DB UNDERREAMER
(Refer to page 138)
The Navi-Drill V.I.P. (Versatile In- The operating pressures and flow
creased Performance) Workover Mo- rates required to run the Navi-Drill
tor series incorporate a PDM design V.I.P. are aligned with coiled tubing
with modular capabilities and “fit for and slim pipe to achieve optimum
purpose” power section configura- horsepower. Slower rotational speeds
tions. The Navi-Drill V.I.P. can be con- improve performance of milling and
figured and aligned to suit a wide cutting products, and increase reliabil-
range of thru-tubing applications. ity during workover operations such
as milling, underreaming, cutting,
OPERATION wash over, or any other operation re-
quiring rotation of a down hole assem-
The Navi-Drill V.I.P. is a versatile de-
bly.
sign incorporating separate stator, top
sub and bearing housing to allow FEATURES/BENEFITS
“plug and play” of new modular power • Modular design for customized
sections tailored to suit specific work operations
over applications. The modular de-
• Controlled rotational speeds pro-
sign allows utilization of proprietary
tects cutting matrix
fluid and air power section technology
that addresses most well bore tem- • Increased reliability in high end
perature ranges and compatibility with applications, (i.e., window milling)
well bore fluids. The air power sec- • Proprietary stator technology
tions specifically address single and • May be powered by fluid/air/foam
two-phase flow applications with nitro- • Capable of operating in tempera-
gen. A new design 30% higher tures over 300°F (149°C)
OPERATING SPECIFICATIONS
Tool Differential
Power Standard Length Flow Rate Speed Torque
OD Pressure
Section Connection
in. mm ft m GPM LPM RPM psi bar ft-lbs Nm
M1V 1" AMMT 155-640 400 28 66 90
1.69 42.9 9.37 2.86 12-50 45-190
M1ADV Box x Box 100-410 230 16 59 80
M1V 1-1/2" AMMT 160-700 640 44 140 190
2.13 54.1 11.38 3.47 17-74 65-280
M1ADV Box x Box 70-300 230 16 120 160
M1V 2-3/8" PAC DSI 95-440 800 55 420 570
2.88 73.2 11.98 3.65 25-120 100-450
M1ADV Box x Box 40-185 290 20 360 490
M1W1 2-7/8" PAC DSI 130-365 800 55 720 975
3.38 85.8 Box x 2-3/8" 16.78 5.11 80-160 300-600
M1ADM API Reg Box 65-125 290 20 710 960
Also available as 2-3/8" API Reg Box x Box.
OPERATING SPECIFICATIONS
Op. Op.
OD Power Standard Length Flow Speed Temperature
∆P Torque
Section Connection
in. mm ft m GPM LPM RPM psi bar ft-lb Nm °F °C
XS 5.51 1.68 435 30 75 105
1" 50 190 640
1.69 42.9 X 7.64 2.33 870 60 150 205 400 204
AMMT
AD 8.33 2.54 40 150 350 725 50 180 245
XS 5.94 1.81 435 30 105 145
1-1/2" 65 250 600
2.13 54.1 X 8.17 2.49 250 340 400 204
AMMT 1,015 70
AD 9.55 2.91 45 175 300 350 475
XS 2-3/8" API Reg 7.80 2.38 120 450 580 40 310 420
THRU-TUBING FISHING
AD PAC DSI 12.60 3.84 85 325 250 885 1,200
Note: XS = “Short”; X = Std Length (Mud); AD = Air Motor
Operating pressure and operating torque are the maximum values the motor should be run at for continuous
operation.
METAL MUNCHER
Turbo Scale Mill
Product Family No. H15101
METAL MUNCHER® The step mill has been built in sizes rang-
ing from 1-1/2" (38.1 mm) to 8-1/2"
STEP MILL (215.9 mm) OD. The mill may be manu-
Product Family No. H15113 factured with a pilot for additional stabili-
DESCRIPTION/APPLICATION zation.
136
THRU-TUBING ROTATIONAL SERVICES Baker Oil Tools
THRU-TUBING FISHING
removal of composite bridge plugs such
• Patented technology
as QUIK Drill™. Opti-Cut dressed mills
use the patented Opti-Cut star shaped in-
SUPERLOY/Opti-Cut
Bladed Junk Mill
Product Family No. H15106
SPECIFICATION GUIDE
Standard DB Underreamer
Tool Max
Standard
OD Open Gauge
Connection
in. mm in. mm
1-1/4" API Reg
2.13 54.1 6.23 158.2
1-1/2" AMMT
1-1/4" API Reg
2.25 57.2 6.23 158.2
1-1/2" AMMT
2.63 66.8 8.12 206.2 1-1/2" AMMT
3.00 76.2 8.60 218.4 2-3/8" PAC DSI
2-3/8" PAC DSI
3.63 92.2 9.99 253.7
2-3/8" API Reg
5.13 130.3 12.00 304.8 3-1/2" API Reg
138
THRU-TUBING ROTATIONAL SERVICES Baker Oil Tools
SPECIFICATION GUIDE
Tool Tubing Max
Length Standard
OD Range Knife Swing
Connection
in. mm in. mm in. mm in. mm
1.81 46.0 2.375 60.3 2.500 63.5 22 558.8 1" AMMT
1.88 47.6 2.375 60.3 3.625 92.1 32 812.8 1" AMMT
2.13 54.1 2.875 - 3.500 73.0 - 88.9 4.375 111.1 29 736.6 1-1/2" AMMT
2.50 63.5 3.500 88.9 4.875 123.8 33 838.2 1-1/2" AMMT Hydraulic Tubing Cutter
Product Family No. H17003
THRU-TUBING FISHING
underreamer allows removal of sand, • Small OD
cement, scale, cast iron, and composite • Large expanded gauge
bridge plugs without pulling the production • Simple design
tubing. The SR2™ Underreamer is a
• Flow path through the mill
2-bladed underreamer provided with a bit
box, which gives the ability to attach a mill • Interchangeable mill
with the desired milling matrix. • SR2™ Underreamers can be run in tan-
dem
SPECIFICATION GUIDE
Tool Min Max Knife
Length Standard
OD Mill OD Expansion
Connection
in. mm in. mm in. mm in. mm
1.650 41.9 1.750 44.5 22.4 569.0 4.625 117.5 1" AMMT Pin
Thru-Tubing Fishing
SR2 Underreamer
Product Family No. H15028
SPECIFICATION GUIDE
Tool Max
Length Standard
OD Casing Gauge
Connection
in. mm in. mm in. mm
1.69 42.9 13.31 338.1 7 177.8 1" AMMT Pin
Thru-Tubing Fishing 1.81 46.0 13.31 338.1 7 177.8 1" AMMT Pin
2-Blade Underreamer
Product Family No. H13252
SPECIFICATION GUIDE
Tool Tool
Length Standard
OD ID
Connection
in. mm in. mm in. mm
1.69 42.9 0.63 16.0 44.13 1120.9
1" AMMT Box x Pin
1.69 42.9 0.63 16.0 51.65 1311.9
2.88 73.2 1.00 25.4 52.50 1333.5 2-3/8" PAC DSI Box x Pin
Tool is equipped with pressure booster piston for lower pressure activation.
SET DOWN INDEXING TOOL hole, any additional set-down weight ap-
plied actuates the Set Down Indexing Tool.
Product Family No. H13259
The tool does not allow the tool string to ro-
DESCRIPTION/APPLICATION tate while resetting.
The Thru-Tubing Fishing Set Down Index- FEATURES/BENEFITS
ing tool offers the ability to orient a fishing • Indexes 120° when applying set-down
tool string in the casing during thru-tubing weight
fishing operations by applying set-down • No hydraulic activation needed
weight.
• Safe to use with hydraulic activated fish-
The Set Down Indexing Tool is designed ing tools
such that it will provide 120 degree of rota- • Can be used with conventional fishing
tion every time it is activated. Once resis- tools that require rotation to be released
tance is met, such as shouldering on the • Tool will reset when weight is released
top of a liner or the top of a fish going in the
SPECIFICATION GUIDE
Tool Tool
Length Standard
OD ID
Connection
in. mm in. mm in. mm
3.38 85.8 1.00 25.4 37.90 962.7 2-3/8" API Reg Box x Pin
THRU-TUBING FISHING
going in the hole, any additional set-down FEATURES/BENEFITS
weight applied actuates the Yankee Screw- • Gives rotation when applying set-down
driver Tool. The additional set-down weight weight
generates rotational movement of the tool • No hydraulic activation needed
string below the Yankee Screwdriver Tool. • Safe to use with hydraulic activated fish-
Currently the tool has a capability of three ing tools
complete rotations with each full stroke of • Can be used with conventional fishing
the tool. tools that require rotation to be released
• Tool is reset when weight is released
SPECIFICATION GUIDE
Tool Tool
Length Standard
OD ID
Connection
in. mm in. mm in. mm Yankee Screwdriver
2.13 54.1 0.5 12.7 129 3276.6 1-1/2" AMMT Box x Pin Product Family No. H13262
NOTES
NON-ROTATING STABILIZER
(Refer to page 153)
HIPP-TRIPPER ACCELERATOR
THRU-TUBING FISHING
BI-DI HIPP-TRIPPER VIBRATORY JAR
(Refer to page 145)
WEIGHT BAR
SPECIFICATION GUIDE
Tool Operating Pump
Frequency Length Max Pull Set-Down Weight
OD Pressure Rate
in. mm psi bar gpm lpm Hz in. mm lbs kg lbs kg
26,000 11,793
1.375 34.9 500 to 2,000 34 to 138 11 to 30 42 to 114 30.75 781 18,000 8,165 400 to 1,000 181 to 454
26,000 11,793
40,000 18,144
27,000 12,247
1.688 42.9 600 to 2,000 41 to 138 11 to 70 42 to 265 36.40 925 800 to 1,500 363 to 680
40,000 18,144
3 to 17
27,000 12,247
53,000 24,040
2.125 54.0 400 to 2,100 28 to 145 11 to 70 42 to 265 43.63 1108 800 to 2,400 363 to 1,088
32,000 14,515
55,000 24,948
2.875 73.0 500 to 1,800 34 to 124 21 to 84 80 to 318 54.00 1372 800 to 2,800 363 to 1,270
32,000 14,515
4.750 120.6 250 to 2,500 17 to 172 11 to 120 42 to 454 47.00 1194 290,000 131,542 500 to 3,100 227 to 1,406
Based on 80% of calculated tensile value.
SPECIFICATION GUIDE
Tool Operating Pump
Frequency Length Max Pull Min Pull Standard
OD Pressure Rate
Connection
in. mm psi bar gpm lpm Hz in. mm lbs kg lbs kg
800 to 55 to 11 to 42 to 47,800 21,700 1" AMMT
1.750 44.45 91.0 2311 1,600 725
2,500 172 70 265 Up Mode: 28,200 12,800 Box x Pin
THRU-TUBING FISHING
Down Mode: Acme Pin
350 to 24 to 21 to 80 to 3 to 17 76,000 34,500 2-3/8" PAC DSI
2.875 73.03 88.6 2250 2,000 900
1,600 110 84 318 61,000 27,700 Box x Pin
Based on 80% of calculated tensile value.
HIPP-TRIPPER
Bi-Di Vibratory
Fishing Jar
Product Family
No. H13405
SPECIFICATION GUIDE
Tool OD Stroke Working Load Length
Standard Connection
in. mm in. mm lbs kg in. mm
1.688 42.88 5 127.0 1,600 726 60.75 1,543 1" AMMT Box x 1-1/8" UNF Pin
2.125 53.98 7 178.0 2,400 1089 56.95 1,447 1-1/2" AMMT Box x Pin
2.875 73.03 7.5 191.0 2,500 1134 64.25 1,632 2-3/8" PAC DSI Box x Pin
HIPP-TRIPPER Accelerators 4.750 120.65 10 254.0 3,000 1361 72.63 1,845 2-7/8" API Reg Box x Pin
Product Family No. H13420 Maximum applied set-down weight when run in conjunction with a single directional impact drill.
BLOCK AND BLAST TOOL the Block and Blast Tool to block off the Single
Direction HIPP-TRIPPER and use all the ener-
Product Family No. H13425 gy to side blast the tubing, casing, or perfora-
tions.
DESCRIPTION/APPLICATION
The blasting should begin from the bottom of
The Block and Blast Tool provides drilling with
the well, slowly pulling up the hole so no solids
impact and the ability to jet-wash tubing in one
fall below the bit.
operation. Until now drilling and acid washing
required separate trips. FEATURES/BENEFITS
The tool has been designed to be used in con- • Used with HIPP-TRIPPER Single Direction
junction with a Single Direction HIPP-TRIP- Impact Drill
PER®. The Block and Blast Tool should be run • Steel ball operated
directly above the Single Direction HIPP-TRIP- • Able to acid wash
PER. Once the HIPP-TRIPPER BHA is run to • Made out of Nickel Alloy 925 material
the desired depth, drop the specified ball to • Capable of handling hostile fluids
shift the sleeve to open position. This allows
SPECIFICATION GUIDE
Tool Tool Overall
Standard Connection
OD ID Length
in. mm in. mm in. mm Top Bottom
0.38 9.5
1.69 42.9 18.25 463.5 1" AMMT Box 1-1/8" UNF Pin
0.44 11.1
HIPP-TRIPPER® BITS, SCRATCHES, • Blind Box, used to drive debris downhole (i.e., wireline
tools, gun debris), is in some cases used with an extension
SWAGES AND DISK BREAKERS to place reciprocating members of the hammer drill above
Product Family No. H13430 the debris. This device has also unlocked wireline set man-
drels and has fired tubing conveyed perforating guns.
DESCRIPTION/APPLICATION
• Ceramic Disk Breaker is a pointed blind box used to frac-
A selection of bits, designed to suit various applications, ture ceramic or glass isolation disks in well completions.
exclusively to be used with HIPP-TRIPPER® impact drills.
FEATURES/BENEFITS
• Cut Button Bit is the optimum impact bit to use on ce-
ment rock or hard scales. It is also effective on removing • Variety of bits handle most clean out operations
sand and other types of fill. The Cut Button Bit has been • Available for standard and hostile environments
successful in removing tubing scale found in geothermal • Impact grade carbide to handle shock loads
wells. • Special connections to match Si-Di and Bi-Di lower
connection
• Six Point Carbide Bit works well on resin sands, hard • Can be redressed for multiple runs
packed sands and fill.
• Available in a range of sizes
• Skirted Carbide Bit is recommended to remove thin wall
scales. Used as a follow-up bit to the Cut Button Bit. SPECIFICATIONS
• Geothermal Bit is designed with large air passages to Please contact your local Baker Oil Tools Thru-Tubing
allow scale removal while the well is flowing. Fishing representative for different bit designs and sizes.
Milling Bottomhole Assembly with Metal Chip Catcher Rotary Venturi Cleanout Bottomhole Assembly
VENTURI JET JUNK BASKET tool’s internal filter. The strained fluid then
passes out at the top with the pumped fluid.
Product Family No. H13051 The fill is then trapped between the filter
DESCRIPTION/APPLICATION above and the finger cages below. Extensions
increase the amount of fill dirt that can be
The Venturi Jet Junk Basket is used to re- brought to surface on each trip. Venturi Jet
move various types of high-density debris and Junk Baskets can be fitted with a dressed
formation particles within small diameter shoe and can be run below mud motors to
cased and open wellbores that are too heavy “break up” and retrieve debris which may be
to be circulated to surface. Flow in the top of compacted.
the tool passes to the outside via adjustable
jets. The jets cause a pressure drop on the in- FEATURES/BENEFITS
side of the Venturi Basket, which acts as suc- • Fully closed finger or flutter catchers
tion at the bottom inlet of the tool. Fill is stirred • Can be run with any type of dressed shoe
up by the flow coming down the outside of the • Have adjustable reservoir through exten-
tool. With the suction at the bottom inlet, the sions
fill is then carried through finger cages into the
SPECIFICATION GUIDE
Tool Min Max
Standard
OD Flow Rate Flow Rate
Connection
in. mm GPM LPM GPM LPM
1.69 42.9 AW Rod Pin 85 319
2.06 50.8 AW Rod Pin 85 319
12.5 46.8
2.63 66.6 1-1/4" API Reg Pin 120 450
3.13 79.3 2-3/8" API Reg Pin 135 506
Venturi Jet Junk Basket
Product Family No. H13051
SPECIFICATION GUIDE
Tool Tool
Length Standard
OD ID
Connection
in. mm in. mm in. mm
3.50 88.9 0.63 16.0 143.63 3648.2 2-7/8" PAC DSI Box x Pin
Centralizer OD is 4.50".
Thru-Tubing Fishing
Chip Catcher
Product Family No. H13102
MOTORHEAD ASSEMBLY
(Refer to page 118)
NON-ROTATING STABILIZER
(Refer to page 153)
NON-ROTATING STABILIZER
(Refer to page 153)
SPECIFICATION GUIDE
Standard Centralizer
Tool Tool
Length Casing Standard
OD ID
Range Connection
in. mm in. mm in. mm
1.69 42.9 0.47 11.9 47.00 1193.8 4-1/2" - 7-5/8" 1" AMMT Box x Pin
1.81 46.0 0.47 11.9 47.25 1200.2 2-3/8" - 7" 1" AMMT Box x Pin
1-1/4" API Reg Box x Pin
2.13 54.1 0.63 16.0 45.00 1143.0 4-1/2" - 9-5/8"
1-1/2" AMMT Box x Pin
2.88 73.2 0.63 16.0 45.00 1143.0 4-1/2" - 9-5/8" 2-3/8" PAC DSI Box x Pin
3.13 79.5 1.00 25.4 43.63 1108.2 7" - 7-5/8" 2-3/8" API Reg Box x Pin
ID specified is tool ID without orifice installed.
Drilling Centralizer
Tool Tool
Length Casing Standard
OD ID
Range Connection
in. mm in. mm in. mm
1.69 42.9 0.47 11.9 47.00 1193.8 4-1/2" - 7-5/8" 1" AMMT Box x Pin
2.13 54.1 0.63 16.0 63.63 1616.2 4-1/2" - 9-5/8" 1-1/2" AMMT Box x Pin
2.88 73.2 0.63 16.0 45.00 1143.0 4-1/2" - 9-5/8" 2-3/8" PAC DSI Box x Pin
3.00 76.2 1.00 25.4 43.44 1103.4 4-1/2" - 10-3/4" 2-3/8" PAC DSI Box x Pin
ID specified is tool ID without orifice installed
Standard Centralizer
Product Family No. H13220
SLEEVE TYPE NON- the fishing assembly. Two stabilizers are rec-
ommended to improve centralization. Sleeve
ROTATING STABILIZER rotation begins as string rotation caused the
Product Family No. H17130 sleeve’s mild steel blades to meet the resis-
tance of the casing walls.
DESCRIPTION/APPLICATION
The Sleeve Type Non-Rotating Stabilizer pro-
FEATURES/BENEFITS
vides maximum centralization during milling, • Provides maximum control for cutting and
cutting, and fishing operations. The stabilizer milling operations
consists of a mandrel, top sub, and sleeve. • Non-rotating sleeve reduces vibration
The stabilizer blades are manufactured from • Reduces shock load on cutter knives for
mild steel to reduce the risk of damage to nip- longer cutting life
ple profiles. The stabilizer is usually run direct- • Sleeves made from mild steel to minimize
ly above the mud or air motor or directly below wear on tubing or casing
the disconnect in a fishing string. • Easily field dressed to accommodate differ-
ent tubing ID’s
The Sleeve Type Non-Rotating Stabilizer is
normally run in the string immediately above • Available in all standard thru-tubing connec-
tions and sizes
SPECIFICATION GUIDE
Body Minimum
OD Tubular ID Standard
Connection
in. mm in. mm
2.13 54.1 2.31 58.7 1-1/2" AMMT Box x Pin
2.88 73.2 3.25 82.6 2-3/8" PAC DSI Box x Pin
3.13 79.5 4.00 101.6 2-3/8" API Reg Box x Pin
3.75 95.3 4.89 124.2 2-7/8" API Reg Box x Pin Sleeve Type
4.25 108.0 5.68 144.2 3-1/2" API Reg Box x Pin Non-Rotating Stabilizer
4.75 120.7 6.00 152.4 3-1/2" API IF Box x Pin Product Family No. H17130
THRU-TUBING FISHING
in underreaming applications to stabilize the
BHA from excessive side loading incurred • Up to 8" (203.2 mm) maximum expansion
with coil tubing applications. • No actuation required
The Mechanical Bow Spring Centralizer utiliz- • Available in most thru-tubing connections
es 5 drag or bow springs which travel on a and sizes
SPECIFICATION GUIDE
Tool Tool Expanded
Length Standard
OD ID OD
Connection
in. mm in. mm in. mm in. mm
43.00 1092.2
1.69 42.9 0.47 11.9 6.500 165.1 1" AMMT Box x Pin
44.25 1124.0
1.81 46.0 0.47 11.9 45.50 1155.7 6.637 168.6 1" AMMT Box x Pin
2.13 54.1 0.81 20.6 45.00 1143.0 6.930 176.0 1-1/2" AMMT Box x Pin
2.88 73.2 0.99 25.1 50.75 1289.0 7.719 196.1 2-3/8" PAC DSI Box x Pin
Mechanical Bow
Spring Centralizer
Product Family No. H13224
SPECIFICATION GUIDE
Single Knuckle Joint
Tool Tool
Length Standard
OD ID Type
Connection
in. mm in. mm in. mm
12.25 311.2 Standard
1.69 42.9 0.56 14.2
11.25 285.8 Sealed / Torque Through
1" AMMT Box x Pin
11.50 292.1 Standard
1.75 44.5 0.56 14.2
12.50 317.5 Sealed
15.63 397.0 Standard
2.13 54.1 0.81 20.6 1-1/2" AMMT Box x Pin
12.00 304.8 Sealed / Torque Through
2.88 73.2 1.00 25.4 15.88 403.4 Sealed / Torque Through 2-3/8" PAC DSI Box x Pin
3.13 79.5 1.00 25.4 17.75 450.9 Standard 2-3/8" API Reg Box x Pin
6.00 152.4 2.00 50.8 38.00 965.2 Standard 4-1/2" NC46 Box x Pin
SPECIFICATION GUIDE
Tool Tool Fit for
Length Standard
OD ID Tubing Size
THRU-TUBING FISHING
1.69 42.9 0.69 17.5 24.00 609.6 2.375 60.3
1" AMMT Box x Pin
1.81 46.0 0.69 17.5 24.00 609.6 2.375 60.3
2.13 54.1 0.81 20.6 27.50 698.5 2.875 73.0
1-1/2" AMMT Box x Pin
2.50 63.5 0.88 22.4 34.75 882.7 3.500 88.9
3.00 76.2 0.94 23.9 41.38 1051.1 4.000 101.6 2-3/8" PAC DSI Box x Pin
3.38 85.8 1.25 31.8 40.99 1041.1 5.000 127.0 2-3/8" API Reg Box x Pin
155
Baker Oil Tools THRU-TUBING ACCESSORY TOOLS
SPECIFICATION GUIDE
Normal Tensile Required
Max Min Max Working Down Force Power
Operational Through Tension For
OD OD Pressure at 3,500 psi Piston Area
Pressure The Tool Shear Release
in. mm in. mm psi bar psi bar lbs kg sq. in. sq. mm lbs kg lbs kg
3.00 76.2 0.50 12.7 5,000 345 3,500 241 17,500 7,936 5.00 3.225 80,000 36,281 25,000 11,340
Power Stroker
Product Family
No. H81128
156
THRU-TUBING ACCESSORY TOOLS Baker Oil Tools
LOCKABLE SWIVEL Once the tool string is made up, the wedge is
removed allowing the torque ring to engage
Product Family No. H13265 with lugs in the housing and lock the tool to-
DESCRIPTION/APPLICATION gether rotationally. When the tools are re-
trieved the swivel can be made free turning
The Lockable Swivel is designed to perform again and held in this position with the unlock-
the same features as a standard swivel when ing wedge.
making up the tool string. But, when the tool
string is ready to be run in the hole, the swiv- FEATURES/BENEFITS
el's clutch will engage to torque lock the tool. • Used for deployment of long tool strings
THRU-TUBING FISHING
• Rotationally locked
When the tool string is broken down coming
out of the hole the swivel's clutch can be dis-
engaged to allow the swivel to turn for ease in SPECIFICATION GUIDE
breaking down the tools. Tool Tool
Length Standard
OD ID
The Lockable Swivel is normally assembled Connection
in. mm in. mm in. mm
in the tool string just below the Coil Tubing 1.69 42.9 0.69 17.5 15.14 384.6
1" AMMT
Connector. After the swivel is made up to the Box x Pin
2.13 54.1 0.75 19.1 17.51 444.8 1-1/2" AMMT
tubing connector the swivel is made free turn- 2.38 60.3 0.75 19.1 17.51 444.8 Box x Pin
ing by pulling the torque ring down to disen- 2-3/8" PAC DSI
2.88 73.2 1.00 25.4 22.23 564.6
gage the torque ring lug from the lug on the Box x Pin
housing. The torque ring is then held in the 2-3/8" API Reg
3.13 79.5 1.00 25.4 22.23 564.6
Box x Pin
disengaged position by pushing the unlocking 2-7/8" PAC DSI
3.50 88.4 1.50 38.1 24.84 630.9
wedge, a special design C-plate, between the Box x Pin
housing and the torque ring so the swivel is
Lockable Swivel
free to rotate as the tool string is made up. Product Family
No. H13265
OPTIMUM FLOW reached, the tool will divert all access fluid to
the annulus through a bypass port. The point
BYPASS SUB at which the tool begins to bypass fluid to the
Product Family No. H13289 annulus can be adjusted. The size of the by-
pass port responds automatically to flow
DESCRIPTION/APPLICATION rates. Motor stalls can still be observed be-
The Optimum Flow Bypass Sub is designed to yond the activation point of the sub. The Opti-
be used on coiled tubing or threaded work- mum Flow Bypass Sub can be adjusted to suit
string with a mud motor. The sub provides a various densities of fluid.
constant optimum flow to the workover motor
FEATURES/BENEFITS
or the BHA below. Flow rates above the acti-
• Delivers constant optimum flow to the motor
vation point are ejected to the annulus
through a bypass port to give an increased • Enables increased annular velocity without
annular velocity. premature motor wear
• Fluid compatible
The Optimum Flow Bypass Sub is located in • Enables better cleaning capacity of the well-
the BHA directly above the motor and mill. bore
Once the activation point of the sub has been
SPECIFICATION GUIDE
Tool
Length Standard
OD
Connection
in. mm in. mm
2.88 73.2 22.72 577.1 2-3/8" PAC DSI Box x Pin
2-3/8" API Reg Box x Pin
3.13 79.5 22.72 577.1
2-7/8" PAC DSI Box x Pin
Optimum Flow Bypass Sub
Product Family No. H13289
THRU-TUBING FISHING The tool is designed so that the top sub and
bottom sub can be reversed. This allows the
HYDRAULIC/MECHANICAL tool to be run reversed using tension to hold
TUBING ANCHOR the anchor. (This feature is not available in the
1.69" [42.9 mm] size.)
Product Family No. H13226
FEATURES/BENEFITS
DESCRIPTION/APPLICATION
• Hydraulically activated
The Hydraulic/Mechanical Tubing Anchor is • Will eliminate movement of coiled tubing
used to anchor the bottomhole assembly in- while cutting
side the tubing. • Can be run in conjunction with a workover
The Hydraulic/Mechanical Tubing Anchor mud motor
uses a cone and collet to anchor the tool to the • Optimum slip design
tubing. The collet is attached to a piston so that • Can be run reversed for upward anchoring
hydraulic pressure is used to activate the tool. use
Mechanical downward force then holds the an-
chor while other operations are performed.
SPECIFICATION GUIDE
Tool OD Tubing Size Tubing Weight Standard Connection
in. mm in. mm in. mm Box Pin
1.69 42.9 2-3/8 60.3 4.6-5.8 6.8-8.6 1" AMMT
2.06 52.4 2-7/8 73.0 6.5-8.6 9.7-12.8 1-1/2" AMMT
3-1/2 88.9 9.2-12.7 13.7-18.9
2.50 63.5 1-1/2" AMMT
4 101.6 9.5-11.0 14.1-16.4
2-3/8" PAC DSI
3.13 79.5 4-1/2 114.3 9.5-26.5 14.1-39.4
2-3/8" API Reg
2-3/8" PAC DSI
Hydraulic/Mechanical 5 127.0 11.5-29.2 17.1-43.5
2-3/8" API Reg
Tubing Anchor 3.50 88.9
2-3/8" PAC DSI
Product Family No. H13226 5-1/2 139.7 17.0-40.5 25.3-60.3
2-3/8" API Reg
SPECIFICATION GUIDE
Tool Tool
Length Standard
OD ID
Connection
in. mm in. mm in. mm Hydraulic Bent Sub
2.13 54.1 0.81 20.6 16.23 412.2 1-1/2" AMMT Box x Pin Product Family No. H13236
THRU-TUBING FISHING
The Deployment Bar is used to hang and seal
off parts of a BHA. The Deployment Bar OD is
SPECIFICATION GUIDE
Tool Tool
Length Available for CT Size Standard
OD ID
Connection
in. mm in. mm in. mm 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-3/8"
0.50 12.7 x
1.69 42.9 1" AMMT Box x Pin
0.75 19.1 x x
0.50 12.7 x
2.13 54.1 0.75 19.1 x x 1-1/2" AMMT Box x Pin
1.00 25.4 x
0.75 19.1 x
2.88 73.2 1.00 25.4 x 2-3/8" PAC DSI Box x Pin
52.00 1320.8
1.50 38.1 x x
0.75 19.1 x
1.00 25.4 x 2-3/8" API Reg Box x Pin
1.50 38.1 x x
3.13 79.5 Deployment Bar
0.75 19.1 x
Product Family No. H16055
1.00 25.4 x 2-7/8" PAC DSI Box x Pin
1.50 38.1 x x
SPECIFICATION GUIDE
Tool
Length Standard
OD
Connection
in. mm in. mm
1.44 36.6 15.69 398.5 3/4" CS Hydril Box x Pin
1.69 42.9 14.69 373.1
1" AMMT Box x Pin
Spinning Wash Tool 1.75 44.5 14.69 373.1
Product Family No. H13266 2.25 57.2 16.21 411.7 1-1/2" AMMT Box x Pin
The Reverse Circulating and Jetting Tool The Reverse Circulating and Jetting Tool
is used to clean sand from the hole by re- is capable of withstanding pressures and
verse circulating. It is used when veloci- flows common with coiled tubing opera-
ties are not sufficient to carry sand to the tions.
surface in the annulus. Sand is retrieved FEATURES/BENEFITS:
through a large bore in the tool and up the
• Full large bore through tool
coiled tubing.
• Carbide nozzle inserts
The tool can also be used as a jetting sub • Swirl pattern jetting coverage
to break up the sand bridges. In forward
• Uses field-proven flapper system
circulating mode a flapper closes off the
SPECIFICATION GUIDE
Tool Tool
Length Standard
OD ID
Connection
in. mm in. mm in. mm
2.88 73.2 0.81 20.6 16.90 429
2-3/8" PAC DSI
3.50 88.9 1.00 2.54 21.49 546
Reverse Circulating
and Jetting Tool
Product Family No. H13288
Rev., September, 2002
Rev., February, 2004
160 Rev., July, 2004
THRU-TUBING ACCESSORY TOOLS Baker Oil Tools
SPECIFICATION GUIDE
Tool Length Length
Tubing Standard
OD (Cocked) (Stroked)
Size Connection Hydraulic Tubing Punch
in. mm in. mm in. mm
Product Family No. H13341
1.75 44.5 42.57 1081.3 50.42 1280.7 2-3/8" 1" AMMT Box
161
Baker Oil Tools WHIPSTOCK SYSTEMS, ANCHORS, AND RETRIEVING TOOLS
SPECIFICATION GUIDE
Mechanical Thru-Tubing Retrievable Whipstock, Product Family No. H15050
Tubing/Casing OD Whipstock OD Exit Size
in. mm in. mm in. mm
5 139.7 3.625 92.1 3.800 96.5
7 177.8 3.625 92.1 3.800 96.5
7 177.8 3.625 92.1 4.125 104.8
7 177.8 3.625 92.1 4.500 114.3
7-5/8 193.7 3.625 92.1 3.800 96.5
7-5/8 193.7 3.625 92.1 4.125 104.8
7-5/8 193.7 3.625 92.1 4.500 114.3
Other exit sizes available.
THRU-TUBING ELEMENTS
1.69"
(42.9 mm)
3.375"
(85.7 mm)
2.13"
(54.1 mm) 2.50" 3.00"
(63.5 mm) (76.2 mm)
6,500 6,500 6,300 5,800 4,200 2,600 2,350 1,800 1,550 1,300
2.50" (448.2) (448.2) (434.4) (399.9) (289.6) (179.3) (162.0) (124.1) (106.9) (89.6)
(63.5) 300 300 300 300 300 300 280 280 260 240
(148.9) (148.9) (148.9) (148.9) (148.9) (148.9) (137.7) (137.7) (126.7) (115.6)
THRU-TUBING INFLATABLE
PERMANENT BRIDGE PLUG
COILED TUBING
The Thru-Tubing Inflatable Permanent Bridge Plug
(PBP) will typically be conveyed into the wellbore via
coiled tubing or electric wireline allowing all the inher-
ent advantages of working over a well both with the
ability of leaving the completion in place and not hav-
ing to perform a well “kill”. SLIP TYPE COILED
TUBING CONNECTOR
Applications for the PBP include lower zone isolation, (Refer to page 102)
BALL OPERATED
CIRCULATING VALVE
(Refer to page 105)
INFLATION VALVE
(Refer to page 106)
HYDRAULIC DISCONNECT
RUNNING TOOL
(Refer to page 109)
77
Baker Oil Tools INFLATABLE PERMANENT BRIDGE PLUG
SPECIFICATION GUIDE
OAL OAL Casing Size In
Chassis With Without Which Tool Can Set In
Size ID Running Running
Min ID Max ID
Tool Tool
in. mm ft m ft m in. mm in. mm
1.69 42.9 7.54 2.30 6.54 1.99 1.880 47.8 5.012 127.3
2.13 54.1 N/A 9.20 2.80 7.70 2.35 2.370 60.2 7.025 178.4
3.00 76.2 10.20 3.11 8.40 2.56 3.120 79.2 12.715 323.0
OAL = Overall Length
Please refer to the Element Rating Table on page 76 for specific element sizes and ratings.
78
INFLATABLE PERMANENT BRIDGE PLUG Baker Oil Tools
SPECIFICATION GUIDE
OAL OAL Casing Size In
Chassis With Without Which Tool Can Set In
THRU-TUBING INFLATABLE
Min ID Max ID
Tool Tool
in. mm ft m ft m in. mm in. mm
2.130 54.1 N/A 10.17 3.10 8.67 2.64 2.370 60.2 7.025 178.4
3.000 76.2 N/A 10.34 3.15 8.54 2.60 3.120 79.3 12.715 323.0
OAL = Overall Length
Please refer to the Element Rating Table on page 76 for specific element sizes and ratings.
79
Baker Oil Tools
NOTES
80
INFLATABLE RETRIEVABLE BRIDGE PLUG Baker Oil Tools
PRESSURE EXTENDER
(Refer to page 98)
BELLEVILLE WASHER
SECONDARY PULL RELEASE
(Refer to page 99)
HYDRAULIC DISCONNECT
RUNNING TOOL
(Refer to page 109)
81
Baker Oil Tools INFLATABLE RETRIEVABLE BRIDGE PLUG
SPECIFICATION GUIDE
OAL OAL Casing Size In
Chassis With Without Which Tool Can Set In
Size ID Running Running
Min ID Max ID
Tool Tool
in. mm ft m ft m in. mm in. mm
1.69 42.9 N/A 9.10 2.77 8.16 2.49 1.88 47.8 5.012 127.3
2.13 54.1 N/A 14.59 4.45 11.04 3.36 2.37 60.2 7.025 178.4
3.00 76.2 N/A 14.08 4.29 11.59 3.53 3.12 79.3 12.715 323.0
OAL = Overall Length
Please refer to the Element Rating Table on page 76 for specific element sizes and ratings.
82
INFLATABLE RETRIEVABLE BRIDGE PLUG Baker Oil Tools
SPECIFICATION GUIDE
OAL OAL Casing Size In
Chassis With Without Which Tool Can Set In
Size ID Running Running
Min ID Max ID
THRU-TUBING INFLATABLE
in. mm ft m ft m in. mm in. mm
3.000 76.2 N/A 14.90 4.54 13.40 4.08 3.12 79.3 12.715 323.0
OAL = Overall Length
Please refer to the Element Rating Table on page 76 for specific element sizes and ratings.
83
Baker Oil Tools
NOTES
84
INFLATABLE PERMANENT CEMENT RETAINER Baker Oil Tools
THRU-TUBING INFLATABLE
COILED TUBING
PERMANENT CEMENT RETAINER
The Thru-Tubing Inflatable Permanent Cement Re-
tainer allows for the permanent isolation and cemen-
tation of the zone below the retainer in a single trip in
the wellbore on threaded or coiled tubing. SLIP TYPE COILED
TUBING CONNECTOR
The retainer houses integral opposing flapper valves (Refer to page 102)
negating the chances of cement contamination after
release of the running string from the retainer. Also in- DUAL FLAPPER TYPE
BACK PRESSURE VALVE
tegral to the retainer is a retrievable spotting valve (Refer to page 102)
which allows for spotting of cement to the tools rather
than the bullheading of unwanted tubing fluids to the
zone of interest prior to the cement job. BALL OPERATED SECONDARY
HYDRAULIC RELEASE
(Refer to page 104)
85
Baker Oil Tools INFLATABLE PERMANENT CEMENT RETAINER
SPECIFICATION GUIDE
OAL OAL Casing Size In
Chassis With Without Which Tool Can Set In
ID
Size Spotting Spotting
Min ID Max ID
Valve Valve
in. mm in. mm ft m ft m in. mm in. mm
1.69 42.9 - - 11.08 337.7 7.81 238.1 1.88 47.7 5.012 127.3
2.13 54.1 0.56 14.2 14.60 4.45 9.40 2.87 2.37 60.2 7.025 178.4
3.00 76.2 0.56 14.2 13.90 4.24 9.40 2.87 3.12 79.3 12.715 323.0
OAL = Overall Length
Please refer to the Element Rating Table on page 76 for specific element sizes and ratings.
86
INFLATABLE RETRIEVABLE PACKER Baker Oil Tools
THRU-TUBING INFLATABLE
RETRIEVABLE PACKER COILED TUBING
TENSION OPERATED
EQUALIZING/CIRCULATING VALVE
(Refer to page 106)
RETRIEVABLE PACKER
(Refer to page 88)
87
Baker Oil Tools INFLATABLE RETRIEVABLE PACKER
SPECIFICATION GUIDE
OAL OAL Casing Size in
Chassis With Without Which Tool Can Set In
ID
Size Spotting Spotting
Min ID Max ID
Valve Valve
in. mm in. mm ft m ft m in. mm in. mm
1.69 42.9 0.425 10.8 9.82 2.99 8.49 2.59 1.88 47.6 5.012 127.3
0.63 16.0
2.13 54.1 13.75 4.19 11.69 3.56 2.37 60.2 7.025 178.4
0.56 14.2
0.63 16.0
3.00 76.2 12.70 3.87 10.90 3.32 3.12 79.3 12.715 323.0
0.56 14.2
OAL = Overall Length
Please refer to the Element Rating Table on page 76 for specific element sizes and ratings.
88
INFLATABLE RETRIEVABLE PACKER Baker Oil Tools
Retrievable Spot
and Treat Packer (RSTP)
Product Family No. H33002
89
Baker Oil Tools
NOTES
90
INFLATABLE STRADDLE ACIDIZING PACKER (ISAP) Baker Oil Tools
THRU-TUBING INFLATABLE
STRADDLE ACIDIZING COILED TUBING
PACKER (ISAP)
The Inflatable Straddle Acidizing Packer (ISAP) is an
inflatable multi-set straddle type of system that allows
for selective placement of treatment fluids in the well-
bore. This innovative system, although it can be run SLIP TYPE COILED
TUBING CONNECTOR
on threaded tubing, was primarily designed for coiled (Refer to page 102)
tubing operations whereby no set-down weight is re-
quired for operation, only a small amount of tension DUAL FLAPPER TYPE
BACK PRESSURE VALVE
and applied hydraulic pressure is required. (Refer to page 102)
THRU-TUBING INFLATABLE
vide some very real operational benefits over compet-
itors products.
NIPPLE PROFILE LOCATOR
(Refer to page 104)
SPOTTING VALVE
(Refer to page 92)
91
Baker Oil Tools INFLATABLE STRADDLE ACIDIZING PACKER (ISAP)
THRU-TUBING INFLATABLE
STRADDLE SYSTEMS
A number of straddle systems have been designed
with varying geometry's to isolate upper or intermedi-
COMPLETION
ate zones within the well while at the same time allow-
ing communication to or from the zones below. These
systems may be run on threaded tubing, coiled tubing
and electric wireline. Many of the straddles can be run
in a single trip or modularly whereby the straddle is
assembled by means of snap latches in situ in the
wellbore. The straddle interval may be blank pipe or
contain flow control devices to incorporate later plug-
ging of the straddle or access to the isolated zone or
zones.
INTERVAL SPACING
93
Baker Oil Tools INFLATABLE STRADDLE SYSTEMS
SPECIFICATION GUIDE
Tool Max OD Tensile
OD ID
Size To Set In Strength Threads
in. mm in. mm in. mm in. mm lbs kg
2.215 56.3 2.125 54.0 0.625 15.9 7.000 177.8 20,000 9071 As Specified
2.500 63.5 2.500 63.5 0.625 15.9 7.625 193.7 20,000 9071 As Specified
2.625 66.7 2.625 66.7 1.000 25.4 6.625 168.3 21,000 9526 1.900 EU
3.000 76.2 3.000 76.2 1.000 25.4 9.625 202.3 73,000 33112 2.375 EU
3.375 85.7 3.375 85.7 1.250 31.8 7.625 193.7 25,000 11340 2.375 EU
3.625 92.1 6.325 92.1 2.250 57.2 7.625 193.7 41,000 18598 2.875 EU
4.250 108.0 4.250 108.0 2.250 57.2 9.625 202.3 41,000 18598 2.875 EU
94
INFLATABLE STRADDLE SYSTEMS Baker Oil Tools
THRU-TUBING INFLATABLE
• Full time equalization across packer
tem is designed to be run on coiled
• Integral ICV to allow for working in
tubing or threaded tubing in vertical,
overbalanced conditions
deviated, or horizontal applications.
• Element tensioning device to assist
in element deflation
SPECIFICATION GUIDE
Description Size
Tool OD (in.) (mm) 3.375 85.7
Tool ID (in.) (mm) 1.25 31.7
Makeup Length -
13.91 4.23
Exclusion of PLT string (ft) (m)
Tensile Strength (lb) (kg) 56,700 25,772
Minimum Bypass area though
1.23 2793.5
tool (in.2) (mm2)
Maximum Temperature (°F) (°C) 300 149
Hydraulic Disconnect Ball Size (in.) (mm) 0.750 19
Circulating Valve Ball Size (in.) (mm) 0.625 15.8
ICV Ball Size - If required (in.) (mm) 0.500 12.7
Thread Up 2.25 in. Acme Box
Thread Down 1.867 in. Stub Acme Pin
Maximum Inflation (in.) (mm) 7.00 ID 177.8 ID
NOTES
96
THRU-TUBING ACCESSORIES Baker Oil Tools
THRU-TUBING INFLATABLE
wireline with a surface DC power sup- locator
ply which requires AC voltage or a
• Can be used with any electric wire-
minimum 6KW generator to operate.
line unit
The operation of the system is tracked
at surface by monitoring the amper- • Decreases the amount of time
age draw of the tool on the power sup- required for inflatable tool operation
SPECIFICATION GUIDE
Tool Overall Makeup Output
OD Thread Thread
Size Length Length Pressure
Up Down
in. mm in. mm in. mm in. mm psi bar
1.690 42.9 1.687 42.9 100.04 2541.0 97.54 2477.4 2,700 186 1.25" Acme
1.187"
1.81 46.0 1.812 46.0
86.81 2205.0 84.23 2139.4 3,200 221 “N” 12 TPI 1.50" Acme
2.125 54.0 2.125 54.0
97
Baker Oil Tools THRU-TUBING ACCESSORIES
SPECIFICATION GUIDE
Tool Overall Makeup Tensile
OD
Size Length Length Strength Threads
in. mm in. mm in. mm in. mm lb kg
1.690 42.9 1.690 42.9 42.29 1074.4 40.00 1016.0 37,500 1,701 1.25" Acme
2.125 54.0 2.125 54.0 37.25 946.2 34.87 885.7 79,000 35,834 1.50" Acme
Test Pressure
Equalizing Valve
Product Family
No. H33082
SPECIFICATION GUIDE
Tool Overall Makeup Tensile
OD ID Extension
Size Length Length Strength Threads
Period
in. mm in. mm in. mm in. mm in. mm lbs kg
2.125 54.0 2.125 54.0 0.19 4.8 49.63 1260.6 47.25 1200.2 78,000 35380 Circa 6 Minutes 1.50" Acme
3.00 76.2 3.00 76.2 0.19 4.8 48.44 1230.4 46.06 1169.9 110,000 49895 Circa 15 Minutes 1.50" Acme
Pressure Extender
Product Family
No. H33083
98
THRU-TUBING ACCESSORIES Baker Oil Tools
THRU-TUBING INFLATABLE
The washers act as a buffer and are not af-
SPECIFICATION GUIDE
Tool Overall Makeup Fishing Neck
OD ID Thread Thread
Size Length Length Size and Type
Up Down
in. mm in. mm in. mm in. mm in. mm in. mm
1.690 42.9 1.690 42.9 0.25 6.35 17.25 438.2 15.00 381.0 1.183 30.1 1.25" Acme 1.25" Acme
2.125 54.0 2.125 54.0 0.25 6.35 17.65 448.1 14.38 365.3 1.375 34.9 1.50" Acme 1.75" Acme
Belleville Washer
Secondary Pull Release
Product Family No. H33080
Thru-Tubing
Pressure Booster
Product Family No. H33084
99
Baker Oil Tools THRU-TUBING ACCESSORIES
Electric Wireline
Reservoir System
Product Family No. H43715
THRU-TUBING INFLATABLE
The purpose of the Positive Fluid Sepa-
ration Reservoir for the Electric Line • Permits operations in environments a
Setting Tool is to provide a source of standard EWST tool could not oper-
clean inflation fluid for the EWST in ate. This would include drilling mud
wells where there is no fluid or where and gas wells
the fluid is undesirable for inflation. The • Provides a benign inflation fluid for
Reservoir is made in four sizes 2.13 in. improved long-term inflatable bridge
(54.1 mm), 2.50 in. (63.5 mm), 2.875 in. plug performance. Some well fluids
(73 mm), and 3.25 in. (82.6 mm) OD. are detrimental for long term perfor-
mance of inflatable elastomers. High
The Reservoir essentially consists of aniline point oils or sour gas are
several 10 foot (3.1 m) long housings examples. The reservoir fluid isolates
screwed together above a special hous- the internal surfaces of the inflatable
ing that encloses the EWST. These element from these type fluids
housings contain a volume of inflation • This reservoir system is operated
fluid and enclose a standard EWST. A downhole in an identical fashion as a
length of 7/32 diameter electromechan- standard EWST and can use all the
ical cable runs inside these housings same accessories as those on a
and through a fluid separator dart to standard TTI EWST job
electrically connect the EWST with a
Internal Coiled
Tubing Connector
Product Family No. H33060
102
THRU-TUBING ACCESSORIES Baker Oil Tools
THRU-TUBING INFLATABLE
for inflatable bridge plug, packer, and cement retainer applications.
FEATURES/BENEFITS
• Allows for the setting of inflatable products in unsuitable pipe flu-
ids, gas wells, or anywhere inflation fluid needs to be separated
from drill pipe, coiled tubing, or threaded pipe
• Provides a benign inflation fluid for improved long-term and reli-
able inflation tool performance
• A simple and cost effective solution that may eliminate methods
like “grease plugs” (which may dissipate at temperature)
• Offers an alternative method for thru-tubing applications that cur-
rently use fluid loading valves
• Ideal for low bottom hole pressure applications when using nitro-
gen in the string especially in highly deviated or horizontal well-
bores
SPECIFICATION GUIDE
Description Size
Tool OD (in.) (mm) 3.00 76.2
Thread Up 2.25" Acme Box
Thread Down 2.25" Acme Pin
Inter Housing Connection 2.75" Stub Acme
Housing ID (in.) (mm) 2.416 61.3
Housing Volume (gal/ft) (l/ft) 0.24 0.90
Minimum flow area for packer/
0.311 200
retainer application (in2) (mm2)
Minimum flow area for Bridge Plug
0.567 365.8
Application (in2) (mm2)
Housing Tensile Strength (lb) (kg) 45,700 20,729
Maximum Temperature (°F) (°C) 300 149
Maximum Burst Pressure (psi) (bar) 8,500 586
Maximum Collapse Pressure (psi) (bar) 5,000 344
Makeup length with 3 housings (for 7.00 in.
31.54 9.61
OD Tubing application) (in.) (mm) Packer Application Bridge Plug Application
THRU-TUBING NIPPLE
PROFILE LOCATOR
Product Family No. H33040
The Thru-Tubing Nipple Profile Locator is a simple method of
locating a known position in the wellbore, allowing for more
accurate positioning of the inflatable element when deploying
via coiled tubing. The Nipple Profile Locator has three leaf
springs retained within a housing. An upset in the middle of
the springs is at a diameter greater than that of the nipple pro-
file it is intended to locate, but the leaf springs can deflect
enough to allow the locator to pass through the nipple. The
contour of the spring is such that the locator will move down
through the restriction fairly easily, yet has sufficient drag
force to allow a detectable weight gain on the coiled tubing
weight indicator at surface as the locator passes up through
the location nipple. The locator has an adjustment sleeve al-
lowing for the force required to be altered prior to running. The
Nipple Profile Locator is not a “single shot” device and numer-
ous passes through the nipple can be made in order to cor-
rectly identify the required point of correlation.
104
THRU-TUBING ACCESSORIES Baker Oil Tools
BALL OPERATED
CIRCULATING VALVE
Product Family No. H33061
The Thru-Tubing Circulating Valve provides a large
area circulation path between the coiled tubing ID and
the annulus. The circulation ports are opened by drop-
ping a ball to its seat in the valve and applying pressure
in order to shear some shear screws and move a pis-
ton downwards. Once the valve has been opened the
ball and seat seal in the mandrel ID below the ports ef-
fectively blocking off any further fluid bypass to below.
This feature allows for the use of the valve for the spot-
ting of fluids above a set inflatable packer with the
knowledge that all fluids are being directed out of the
circulating valve and not to below the packer. Applica-
tions for the circulating valve include chemical treat-
PRESSURE OPERATED
CIRCULATING VALVE
Product Family No. H33051
The Thru-Tubing Pressure Operated Circulating Valve
provides a means of opening communication from the
inside of the coiled tubing to the annulus. The tool may
be used above such tools as packers to allow treating
above the set tool or, in the case of a straddle system,
to provide communication between the packers. The
Pressure Operated Circulating Valve is normally a
closed valve and is opened by applying tubing pres-
sure. The applied pressure acts on an unbalanced pis-
ton inside the housing. This piston is retained in the
closed position by shear screws. When the predeter-
mined value of these shear screws is reached, the pis-
ton is pumped down opening ports to the annulus.
Once the valve is opened, it cannot be shut again.
105
Baker Oil Tools THRU-TUBING ACCESSORIES
TENSION OPERATED
EQUALIZING/CIRCULATING VALVE
Product Family No. H33075
The Thru-Tubing Equalizing/Circulating Valve pro-
vides a means of opening a communication path be-
tween the coiled tubing ID and the annulus by applying
tension to the coiled tubing. This communication path
may be used to equalize pressure from the coiled tub-
ing to annulus, circulate fluids from the coiled tubing to
the annulus, and various other operations. The circu-
lating path can be opened and closed multiple times by
either applying tension to the coiled tubing or setting
down on the set tool below. Running in the hole, the
tool is held in the closed position by pressure release
dogs. When pressure is applied to the coiled tubing to
set the inflatable element of the tool below, the dogs
are released and the valve can now be opened by pull-
ing tension in the coiled tubing. From this point on the
mandrel is free to move and repeated opening and
closing of the valve is possible.
Two different configurations of valves are manufac-
tured. One has no isolation feature below the valve
when it is opened; and, the second when opened does
close below to positively isolate below the valve.
Tension Operated Equalizing/Circulating Valve
Product Family No. H33075
106
THRU-TUBING ACCESSORIES Baker Oil Tools
PULL-TO-EQUALIZE VALVE
Product Family No. H33001
The Pull-To-Equalize Valve may be added to a Thru-Tubing Retrievable Packer
System. The standard packer uses a ball to operate the equalizing mechanism.
In some cases, such as a squeeze operation, it may not be possible to circulate
a ball to its seat in the packer. Here a Pull-To-Equalize Valve may be run. By the
application of tension applied to the coiled tubing, the equalizing valve will be
sheared open and the zones above and below the set packer allowed to com-
municate. Once equalization is complete, a minimal amount of set-down weight
is required in order to latch the packer pull release mechanism.
THRU-TUBING FLUID
LOADING VALVE
Product Family No. H33050
The Thru-Tubing Fluid Loading Valve (FLV) was de-
signed to allow the coiled tubing to be filled with a lim-
ited amount of fluid (water), prior to running in the hole,
with which to inflate the element when setting in condi-
tions where a large pressure imbalance would exist be-
tween the hydrostatic of a fluid column in the coiled
tubing to the setting depth bottom hole pressure in low
pressure wells. This allows for the element to be inflat-
ed with fluid while allowing for the coiled tubing to be
pressurized with a gas. The FLV utilizes a sleeve type
design which allows an exterior port to be either
opened or closed to the interior of the tool. After a suf-
ficient amount of fluid has been pumped into the coiled
tubing (to inflate the element), the valve is closed by
means of rotation of this outer sleeve. The filler hose is
then removed and the outer sleeve locked by means of
set screws
108
THRU-TUBING ACCESSORIES Baker Oil Tools
109
Baker Oil Tools THRU-TUBING ACCESSORIES
TTIDESIGN™
TTIDESIGN is Baker Oil Tools’ propriety software design program developed to help in the information gathering,
engineering, execution and post job reporting phases of an isolation
planned with thru-tubing inflatable technology.
Inflatable Element
Well Condition #1
Pre-Job
Information
Volume Calculations
Performance Envelope
THRU-TUBING INFLATABLE
THRU-TUBING HYDRAULIC CENTRALIZER
Product Family No. H34017
The Thru-Tubing Hydraulic Centralizer, like the mechanical bow spring type, is
designed to pass through the production tubing and centralize in the pipe below.
Centralization is achieved by the application of flow through the mandrel working
against a choke. It is the back pressure created by flowing through this choke
that expands the bow springs of the centralizer. Varying the rate of circulation
will vary the deflection of the bow springs. Stopping circulation will allow the bow
springs to collapse back in order for retrieval of the toolstring.
Thru-Tubing Wash-Over
Retrieving Head
Product Family No. H34011