Professional Documents
Culture Documents
6E - How To Measure Guide..Jaine & Jack
6E - How To Measure Guide..Jaine & Jack
6E - How To Measure Guide..Jaine & Jack
1
Hip: ........................................................................................................................................................................................................ 63
Body Length: ......................................................................................................................................................................................... 65
Bottom Opening:.................................................................................................................................................................................... 65
Bodysuit / 1-Piece:................................................................................................................................................................................. 68
SECTION FOUR: BOTTOMS – HOW TO MEASURE .................................................................................................................................. 75
Waist: .................................................................................................................................................................................................... 75
Waistband Details: ................................................................................................................................................................................. 77
Hip: ........................................................................................................................................................................................................ 80
Rise, Gusset: ......................................................................................................................................................................................... 82
Zipper Fly: ............................................................................................................................................................................................. 83
Leg: ....................................................................................................................................................................................................... 83
Yoke / Dart: ........................................................................................................................................................................................... 91
Skirt: ...................................................................................................................................................................................................... 93
Bib Overall/One Piece: .......................................................................................................................................................................... 93
Panty/Underwear/Diaper Cover/Swim Bottom/Swim Liner: .................................................................................................................... 96
SECTION FIVE: DETAILS FOR ALL GARMENT TYPES .......................................................................................................................... 103
Keyhole Opening: ................................................................................................................................................................................ 103
Bottom Opening Details: ...................................................................................................................................................................... 104
Ruffle/ Tulle: ........................................................................................................................................................................................ 106
Pockets: .............................................................................................................................................................................................. 107
Patch, Cargo, Kangaroo Pocket & Flaps: ......................................................................................................................................... 107
On Seam, Welt, Pork Chop, Coin, Tool Pockets: ............................................................................................................................. 115
Pocket Placements: ......................................................................................................................................................................... 121
Tabs: ................................................................................................................................................................................................... 128
Bow: .................................................................................................................................................................................................... 129
Pleats, Tucks and Darts:...................................................................................................................................................................... 132
Trims/Bindings/ Elastics/Hook & Loop/ Tassel/Pom Pom: ................................................................................................................... 134
Sash/ Belt/ Belt Loops: ........................................................................................................................................................................ 136
Lining: .................................................................................................................................................................................................. 140
Additional Button/ Buttonhole/ Grommet Placements:.......................................................................................................................... 142
Topstitching/Quilting Details: ............................................................................................................................................................... 143
Artwork/LID Positions: ......................................................................................................................................................................... 147
2
SECTION SIX: ACCESSORIES.................................................................................................................................................................. 152
Bedding: .............................................................................................................................................................................................. 152
Bag: ..................................................................................................................................................................................................... 157
Wallet: ................................................................................................................................................................................................. 163
Belt: ..................................................................................................................................................................................................... 164
Bib: ...................................................................................................................................................................................................... 164
Blanket / Towel / Burp Cloth: ............................................................................................................................................................... 165
Gloves / Mittens: .................................................................................................................................................................................. 167
Hat:...................................................................................................................................................................................................... 172
Circumference: ................................................................................................................................................................................ 172
Crown / Overhead:........................................................................................................................................................................... 174
Bands / Brims / Bills: ........................................................................................................................................................................ 180
Straps: ............................................................................................................................................................................................. 183
Ear Flaps: ........................................................................................................................................................................................ 183
Keyholes / Back Elastic:................................................................................................................................................................... 185
Molded Hats: ................................................................................................................................................................................... 185
Hair Accessories:................................................................................................................................................................................. 188
Headbands / Earmuffs: .................................................................................................................................................................... 188
Head Wraps:.................................................................................................................................................................................... 190
Pony Tail Holders: ........................................................................................................................................................................... 190
Jewelry: ............................................................................................................................................................................................... 190
Scarf: ................................................................................................................................................................................................... 192
Sock: ................................................................................................................................................................................................... 194
Tie: ...................................................................................................................................................................................................... 196
Tights: ................................................................................................................................................................................................. 198
SECTION SEVEN: TIGHT FITTING SLEEPWEAR – (CPSC GUIDELINES) .............................................................................................. 201
SECTION EIGHT: SHOES .......................................................................................................................................................................... 202
3
SECTION ONE: INTRODUCTION
The How to Measure Guide offers the technical methods of how to measure Janie & Jack products. The How to Measure Guide is a living and
continually evolving document. All Janie and Jack employees, Vendors, Factories and Agents that are manufacturing Janie and Jack products are
expected to utilize and understand the contents of the How to Measure Guide. Failure to comply could result in charge backs and termination of
future or ongoing orders.
4
SECTION TWO: GENERAL MEASURING
GUIDELINES
1) All Garments
G. When measuring along a curve, the tape measure should be
A. All garments should be measured on the wearers left. on its edge.
D. It is preferred that metal tape measures are used when H. When determining a placement from an imaginary line, use a
measuring a garment. clear ruler and align at the designated placement.
5
L. Waist Width (Rigid) is defined as a rectangular shaped cut
piece.
6
3) Tight-Fitting Sleepwear Requirements (CPSC)
7
TREF110
SECTION THREE: TOPS Strap Join Seam / Point:
8
TA115 & TA116 TA201
Neck Width – Relaxed – Neck Drop – Front – @
Including Straps: Seam:
Front (TA115)
Back (TA116) With an imaginary line
Measure straight across across neck HPS to HPS.
from armhole edge to
armhole edge including Measure from the
straps with garment imaginary line to neck
relaxed. seam at center front.
TA117 & TA118 TA202
Neck Width – Extended – Neck Drop – Front With
Including Straps: Strap – From HPS:
Front (TA117)
With an imaginary line from
Back (TA118) HPS to HPS.
Measure straight across
from armhole edge to Measure from the
armhole edge including imaginary line to the neck
straps with garment edge at center front.
extended. TA203
TA200 Neck Drop – Front – To 1st
Neck Drop – Front – @ Button:
Edge:
From an imaginary
With an imaginary line horizontal line at HPS,
across neck HPS to HPS. measure straight down to
the center of the first button
Measure from the
imaginary line to neck edge
at center front.
9
TA300 TA304
Neck Drop – Back – @ Neck Drop – V Back
Edge: Vertical From Waist Seam:
10
TA307 TA500
Neck Drop – V Back Strap Distance – Front:
Vertical From HPS:
Measure at the inside
Measure from CB HPS edge to edge between
line to CB neck edge. the straps where the
straps join the bodice.
TA501
TA400 Strap Distance – Back:
Neck Curve or V Depth –
Front or Back @ Strap Measure at the inside
Join: edge to edge between
the straps where the
With an imaginary line straps join the bodice.
from strap join to strap
join. TA600
Minimum Neck Stretch:
Measure from the
imaginary line to the neck To determine if a garment
edge at Center meets minimum neck
Front/Back. stretch. Open any neck
TA401 plackets. Use the acrylic
Neck Curve Depth – Back tool marked with the
– From Armhole: measurement according
to the spec.
With an imaginary line
from armpit to armpit. Push the tool through the
neck opening. Tool
Measure from the should pass through the
imaginary line to the neck neckline easily.
edge.
11
TA601
Minimum Neck Opening –
(Swim): 1/2 Measurement
12
Neckline Finish (Collars, Bindings, Trim & TA800
Neck Inset Height @
Facing Insets): Center Front:
TA700
Neck Facing Height @ Measure Inset from
Center Front: edge to seam at CF.
TA801
Measure inside facing Neck Inset Width @
from CF neck edge to Top Edge:
bottom edge of facing.
TA701 Measure Inset along top
Neck Facing Height @ edge from seam to
Center Back: seam.
TA900
Measure inside facing Crew or V Neck Rib
from CB neck edge to Height:
bottom edge of facing.
TA702 Measure from seam to
Neck Facing Height @ edge of rib.
Shoulder:
TA901
Measure inside facing Neck Band Height:
from HPS to bottom
edge of facing along Measure Band from
shoulder. edge to seam at CF.
TA703
Back Neck Facing TA902
Height – Distance Neck Binding Height:
Below Front Neck Drop
Measure binding from
Back neck facings to edge to edge.
extend below front neck
drop for hanger appeal.
13
TA903 TA915
Neck Binding Height – Hanger Loop Width:
Inside or Back Neck
Tape Height: Measure loop width
from edge to edge.
Measure from seam to TA916
edge. Hanger Loop Length:
TA904 Measure length from
Neck Casing Height: seam to seam.
Measure from stitch to TA917
edge. Hanger Loop Distance
Apart – @ Neck Seam:
14
TA932
# Of Snaps / Buttons /
Hook & Loop Pieces @
Neck Tab:
15
Notch Collar TB105
TB100 Lapel Point Height: @
Collar Height – @ CB: Edge
16
TB108
Collar Height – @
Shoulder:
TB110
Collar Roll Height – @
Shoulder:
17
Stand-Up Collar TB116
TB111 Collar Stand Height –
Collar Point Spread: @ CF:
TB117
TB112 Collar Stand Width:
Collar Tie Space:
Measure from center of
Measure from collar fold button to end of
edge to edge. buttonhole at the center
of the collar stand.
TB113 TB117A
Collar Height – @ Collar Length At Outer
Center: Edge:
18
TB119
Button Or Snap Position
– On Collar Stand –
Vertical:
19
Turtle, Mock Turtle Neck: TB172
TB130 Half-Moon Facing
Width:
Collar Opening Width –
Turtle / Mock Neck:
Measure at widest
point.
Line the front and back
edges of the collar up
evenly.
20
TB203 TB207
Hood Width @ ½ Of Hood Opening Casing
Hood Opening Height: Height:
TB205
Hood Opening Rib Or
Tubular Height:
TB210
Hood Center Panel
Width @ Front Edge:
Measure from edge to
seam.
Measure from seam to
seam at front edge of
hood opening. Measure
TB206 extended if applicable.
Hood Opening Hem
Height: TB211
Hood Center Panel
Measure from stitch line Width @ Front Edge –
to opening edge. All Relaxed:
stitching is included in
hem height. Measure from seam to
seam at front edge of
hood opening with
elastic in relaxed state.
21
TB212 TB216
Hood Center Panel Hood Chin Height:
Width @ Crown:
Measure from edge to
Measure from seam to seam or edge if
seam at the center of the detachable.
hood.
TB217
TB213 Hood Placket Height –
Hood Center Panel Outside:
Width @ CB Neck:
TB214
Hood Extension Height
@ CF: TB218
# Of Snaps / Buttons /
Measure from edge to Hook & Loop Pieces @
seam. Hood Placket:
22
TB221
Hood Overlap Width:
TB230
Zipper Length – Full
Zipper – Hood:
23
Placket: TB301
TB300 CF Overlap Width:
Placket Width (Front Or
With CF overlapped at
Back):
placket, measure
overlap edge to edge.
Measure from edge to
edge horizontally.
TB302
CF Overlap Width –
Double Breasted:
With CF overlapped at
placket, measure
overlap edge to edge.
TB303
Center Back Overlap
Width:
24
TB303A TB306
Front Opening Overlap Placket Box Stitch
Position From Side Width:
Seam:
Measure from placket
With front opening edge to stitch.
overlapped to opposite
side, measure from side
seam to opening edge. TB307
Placket Box Stitch
Height:
TB304
Tubular Placket Width: Measure from stitch to
stitch.
Measure from edge to
linking seam.
TB308
Placket Length –
Excluding Collar Stand:
TB305
Placket Opening Length
(Front Or Back):
25
TB309 TB312
Placket Length – Below Placket Facing Width –
Waist Seam: @ CF:
TB310
TB313
Placket Facing Width –
Y-Facing (1/2 Zip
@ Shoulder:
Facing) Width At
Bottom Of Zipper:
Measure facing width
on shoulder seam from
Measure the facing
neck seam to edge of
width at the bottom of
facing.
the zipper.
TB314
Length of Hidden
Placket Below Waist
TB311 Seam:
Placket Facing Width –
@ Bottom Edge: Measure from waist
seam to placket end.
Measure facing width at
bottom from front edge
to edge of facing.
26
TB500 TB511A
# Of Buttons / Snaps / Toggle Position – 1st –
Hook & Loop Pieces From Neck Seam To
(Front, Back): Center Of Patch:
TB511
Button Position – 1st –
From Seam: TB513
Button Position – 1st
Measure from the seam From HPS:
to the center of the
button. From an imaginary
horizontal line at HPS,
measure straight down
to the center of the first
button.
27
TB514 TB521A
Button Position – 1st Toggle Position – Last –
From Collar Stand From Bottom Edge To
Button: Center Of Patch:
28
TB540 TB552
Button Position – From Button / Snap / Hook &
End of Strap: Loop Position – 2nd –
From Yoke Seam Up:
Measure from strap
edge to center of Measure up from yoke
button. seam to center of
button.
TB550
Button / Snap / Hook &
Loop Position – 2nd – TB560
Centered Between Top Button / Snap / Hook &
Button and Bottom of Loop Position – 3rd –
Placket: Snap Distance Above
Waist Seam:
29
TB570 TB586
Button / Snap / Hook & Button Spacing Vertical:
Loop Position – 4th –
Centered on Length of Measure center of
Placket Below W/B: button to center of
button.
Place 4th button in
center of placket length
below waist seam.
TB590
Toggle Patch Height:
30
TB601 TB604
Zipper Guard Width: Zipper Facing Width –
@ Shoulder:
Measure from seam to
edge of guard. Measure at shoulder
facing from neck edge
to facing edge at
shoulder.
TB602
Zipper Pull Length:
Include Hardware
TB603
Zipper Lip Width:
31
TB605 TB651
Zipper Facing Width – Wind Guard Is Longer
@ Bottom Edge: Than Zipper:
TB652
Wind Guard Is Set @
Wearer's Left Side For
Girl.
Shoulder/Strap Measurements:
32
TC100 TC113
Strap Width: Total Strap Length
(Swim) – Including 2”
Measure from edge to Adjustable Loop:
edge.
Measure from front
strap join to back strap
end with 2” adjustable
loop length.
TC110
Strap Length – To Join
TC114
Seam Point: Strap Loop Height –
(Swim):
Measure from strap end
to join seam. Measure from top folded
edge to loop end.
TC111
Strap Length – Neck TC115
Edge – To Center Of Back Tie Length –
Clasp: (Swim):
33
TC121 TC125
Shoulder Seam No Shoulder Seam
Forward – @ Neck: Forward For Stripe
Garments:
At neck measure from
natural shoulder on fold Shoulder seam is on
to shoulder seam natural shoulder line
forward. and not forward to front.
TC122 TC126
Shoulder Seam Shoulder Slope –
Forward – @ Armhole: Dolman:
34
TC131 TC150
Shoulder Slope – Raglan Seam Position –
Raglan: Front:
35
TC162 TC170
Epaulet Position – At Shoulder Panel Width
Shoulder / Armhole At Neck:
Seam:
At neck seam measure
Position the end of the shoulder panel width
epaulet at the sleeve from seam to seam.
seam.
TC163
Epaulet Button Or Snap
Position – From Sleeve
Seam: TC171
Shoulder Panel Width
Measure from the At Shoulder:
sleeve seam to the
center of the button. At armhole seam
TC164 measure shoulder panel
Epaulet Box Stitch width from seam to
Width: seam.
TC180
Measure from stitch line
Lap Shoulder – At
to stitch line.
Armhole:
36
TC191 TC194
# Of Buttons / Snaps / Shoulder Placket Snap
Hook & Loop Pieces @ Position – Last – Center
Shoulder: 2nd Snap Between Neck
Seam And Armhole
Spec will note the Seam:
number of snaps,
buttons or hook and Center shoulder snap
loop pieces to order. horizontally, between
Worksheet will note the neck and armhole
balance of details for seam.
the order.
TC192 TC195
Shoulder Placket Collar Shoulder Placket Snaps
Snap Position – Position – 2 Snaps –
Centered: With Neck Binding:
37
TC201 TC214
Yoke Seam Position – Yoke Width
Up From Armhole:
Measure from edge to
Measure straight up edge or seam to seam
from armhole seam / along yoke seam.
edge to yoke seam.
TC210 TC220
Yoke Height – @ CF: Yoke Box Pleat Width:
TC211
Yoke Height – @ CB: TC221
Yoke Box Pleat Depth:
Measure at CB neck
edge or seam to seam. Measure underlay from
outside fold to inside
fold of the pleat.
TC212 TC230
Yoke Height – @ Front Yoke Overlap
Armhole: From CF To Edge:
38
TC231 TC260
Front Yoke Overlap Button Position – Last –
Horizontal From S/S To Vertical Up From Yoke
Edge: Seam:
TC301
Armhole – Raglan:
TC250 Measure from HPS to
Front / Back Yoke armpit.
Shirring Width: TC301A
Armhole – Dolman:
Measure at seam start
of shirring to end of Measure from HPS to
shirring. dolman armhole position
TC251 at underarm/side seam.
Yoke Curve Depth:
39
TC301B TC304
Armhole Position – From Armhole – With Strap:
HPS: Dolman
Establish an imaginary
Determine dolman line across HPS
armhole position by extending beyond the
measuring down from the width of the garment.
HPS to the point
designated on the spec. Measure straight up from
TC302 armhole to HPS.
Armhole – Camisole:
Styles with straps with 2
fasteners should be
Measure from strap join
measured with the top
point to armpit along
fastener closed.
armhole curve.
TC305
Armhole – Tank: Edge to
TC303 Edge
Armhole – Camisole
Strap Length: Measure from edge to
edge.
Measure from strap join
point to strap join point.
TC305A
Armhole – Tank: Seam to
Seam
40
TC306 TC311
Armhole – Edge to Edge Front Underarm Shirring
Length - (Swim):
Measure from Shoulder
point edge to armpit Measure from shirring
edge. point to point.
TC307
Armhole – Along Curve -
S/S To Neck Edge: TC315
Minimum Armhole
Measure from Side Seam Opening – (Swim):
along armhole curve to 1/2 Measurement
neck.
Measure from edge to
TC308
edge with armhole
Armhole - (Swim):
opening stretched.
Measurement must not
Front and back armhole
be smaller than specified
edges lined up. With
amount on the spec
elastic straightened and
sheet.
relaxed, measure
armhole from edge to
edge. TC320
TC310 Armhole Rib or Tubular
Front Underarm - (Swim): Height:
41
TC321 TC330
Armhole Binding Height: Sweater Armhole Inset
Length:
Measure binding from
edge to edge. Measure from the edge to
the armhole base.
TC322
Armhole Casing Height: TC340
Back Armhole Flange
Measure from edge to Width:
stitch.
Measure at center of
flange, width from seam
to edge of flange.
TC350
Topstitch Length @ Front
Armhole:
42
TC370 TC401
Puff Shirring Length: Sleeve Length – Short:
TC421
Sleeve Length – Long:
43
TC422 TC501
Sleeve Length – Long Upper Arm Width – @
Raglan: Point TC521 (FOR TF
SLEEP ONLY):
Measure from the center
back to HPS to shoulder Draw a straight line from
point to end. waist / sweep through
armpit. Measure along
Styles with folded cuff to sleeve fold TC521, upper
be measured with cuff arm position. Measure
folded up. the upper arm
TC430 perpendicular to fold.
Half Cap Or Flutter TC520
Sleeve Position: Bicep Position:
TC521
TC500
Upper Arm Width Position
Sleeve Width:
(FOR TF SLEEP ONLY):
Measure from the armpit
Upper arm width position
point straight up to folded
as specified on spec.
edge of sleeve.
TC523
Bicep Width:
Measure at the
designated point from fold
to seam.
44
TC600 TC622
Elbow Position: Elbow Patch Position
Vertical:
Determine elbow position
at half of underarm seam. Measure from sleeve
opening edge to bottom
Or from armpit to point of elbow patch.
designated on the spec.
TC601
Elbow Width:
TC623
Measure at the Elbow Patch Position
designated point from fold Vertical – ½ Of Underarm
to seam, perpendicular to Sleeve Length:
sleeve fold.
Measure from armpit to
TC620 half the length of
Elbow Patch Width: underarm to center of
elbow patch.
Measure at the width of
the elbow patch. TC630
Elbow Patch Position
Horizontal – Centered On
Back Of Sleeve:
45
TC640 TC700
Sleeve Stripe Width: Sleeve Opening – Short:
TC641
Sleeve Stripe Height:
TC701
Sleeve Opening – Half
Measure from seam to Cap:
seam.
Measure from the fold
edge to the seam at
armhole.
TC642
Sleeve Stripe Position –
From Underarm: TC702
Sleeve Opening – Long:
Measure from armhole
seam to sleeve stripe Measure from edge to
seam at underarm. edge.
TC643
Sleeve Stripe / Trim
Position – From Shoulder
Point:
46
TC703 TC706
Sleeve Opening – Elastic Sleeve/Leg Opening –
– Relaxed: Rib Cuff Minimum –
Extended @ Seam:
Measure from edge to
edge with the sleeve With the rib fully stretched
opening relaxed. at the seam.
47
TC800 TC804
Sleeve Hem Height: Sleeve Ruffle Height:
TC801 TC806
Cuff Height: Sleeve Casing Height:
TC802
Sleeve Opening Tubular TC807
Height: Cuff Tipping Height:
Measure from edge to
tubular start or join.
TC803
Sleeve Binding Height:
48
TC820 TC910
# of Buttons / Snaps / Sleeve Placket Length –
Hook & Loop Pieces @ @ Side:
Sleeve Cuff:
Measure from the
Spec will note the number stitching line to the cuff
of snaps, buttons or hook seam.
and loop pieces to order.
Worksheet will note the
balance of details for the
order.
TC911
Sleeve Placket Length –
TC900 @ Center:
# of Buttons / Snaps /
Hook & Loop Pieces @ Measure from top of end
Sleeve Placket: of placket to cuff seam.
49
TC921 TC941
Sleeve Placket Binding Sleeve Pleat Position:
Height:
Sleeve pleat position
Measure from seam to should be halfway from
edge horizontally. placket seam to center of
sleeve.
TC930
Sleeve Placket Position TC942
From Underarm To Sleeve Pleat Spacing:
Placket Edge:
Space pleat apart as
Measure from underarm specified on spec.
seam at cuff to placket. Measure from pleat to
pleat.
TC943
TC940 # Pleats @ Sleeve Cuff:
Sleeve Pleat Depth:
Spec will note the number
Measure the pleat depth of pleats.
from the top pleat fold to
the inside fold.
TC944
# of Times to Roll Sleeve
Cuff:
50
TC945 TD004
Sleeve Rolled Cuff Sleeve Gator Height Total
Height: @ Inside:
TD001
Sleeve Gator Rib Height:
TD010
Measure rib from folded Sleeve Vent Length:
edge to seam.
Measure from cuff seam
to vent end.
TD002
Sleeve Gator Relaxed
Rib Opening:
TD020
Sleeve Tab Width:
51
TD022 TD100
Sleeve Tab Position: High Chest Position –
From Armhole:
Measure vertical from
sleeve opening edge. Determine high chest
position by measuring
up from the bottom of
the armhole to the point
designated on the spec.
TB680
Sleeve Button Position
Vertical From Sleeve Cap TD101
Seam: High Chest Position –
From HPS:
Measure from sleeve cap
seam to center of button. Determine high chest
position by measuring
down from the bottom
of the HPS to the point
designated on the spec.
TB682
Sleeve Button Position TD105
Vertical From Sleeve High Chest – Front:
Edge:
Measure from edge to
Measure from sleeve edge or seam to seam
opening edge to center of @ the point indicated
button. on spec.
High Chest:
52
TD106 TD111
High Chest – Front – @ High Chest – Back – @
Mid Armhole: Mid Armhole:
Chest:
TD110 TD200
High Chest – Back: Chest Width:
53
TD200B TD204
Chest Width: Dolman Chest Width Relaxed:
TD201 TD205
Chest Width – Front: Chest Width Extended:
54
TD216 TD221
Chest Width @ Bottom Shelf Bra Height at Side
Edge: Seam: from Edge to
Bottom of Elastic
Measure from point to
point at the bottom edge. Measure from armhole
edge to bottom of elastic
TD217 TD222
Chest Width @ Chest Shelf Bra Elastic Length –
Band: Relaxed:
TD218 TD223
Chest Width @ Bottom
Shelf Bra Elastic Length –
Of Triangles – (Bikini):
Extended:
Measure from bottom of
Measure from edge to
triangle edge to edge.
edge with elastic fully
extended.
TD219
Chest Overlap – @
Center Front: TD225
Chest Width – Back:
Measure from Center
Front to edge. Measure from seam to
seam at armpit. Or below
armpit, point designated
on spec.
55
TD226 TD230
Chest Width – Back – Cup Height at Center -
Relaxed: (Swim):
56
TD235 TD300
Underwire Channel Chest Stripe Height:
Length - (Swim):
Measure chest stripe
Measure channel along vertically from seam to
outer seam from edge to seam.
edge.
TD301
TD236
Chest Stripe Position:
CF Panel Width at Top –
(Swim):
Measure vertically from
HPS or from CF neck
Measure between cups at
seam / edge.
top edge from seam to
seam.
TD237
CF Panel Width at
TD302
Bottom – (Swim): Chest Band Height:
57
TD401 TD405
Princess Seam Position Panel Width At Back:
Horizontal @ Chest –
From S/S (Front / Back): Measure from side back
seam to center back at
Measure from side edge waist position.
to seam.
TD406
Princess Seam Pos
Horiz @ Shldr: from A/H
TD402
Princess Seam Position
Measure at shoulder
Horizontal @ Waist –
seam from armhole
From S/S (Front / Back):
seam to desired
princess seam position
Measure from side
as indicated on the
edge to seam.
spec.
TD407
TD403 Princess Seam Pos
Princess Seam Position Horiz @ Shldr:
@ Bottom Edge – Front Centered on Shoulder
/ Back: Seam
58
TD515 TD517
Side Panel Width: Side Panel Width @
Bottom Edge:
Measure panel width
from seam to seam. Measure panel width
from seam to seam.
TD516 Waist:
Side Panel Width @
Armhole: TE100
Waist Position – From
Measure panel width HPS:
from seam to seam.
Measure from HPS
down to desired waist
position as indicated on
the spec.
TE101
Waist Position – From
Armhole:
Measure at underarm
point down to desired
waist position as
indicated on the spec.
59
TE102 TE110
Waist Seam Position – Waist Width:
From HPS:
Measure from edge to
Measure from HPS to edge at the point
waist seam. designated on the spec
(from HPS or from
armpit).
TE103
Waist Seam Position –
From Armhole:
60
TE113 TE117
Waist Width @ 1st Waist Width @ Trim:
Button Position Across:
Measure from seam to
Measure across 1st seam at trim.
button from edge to
edge.
TE118
Waistband Width Rigid
TE114
@ CF:
Waist Width – Front:
Measure from seam to
Measure from seam to
seam.
seam at the point
designated on the spec
(from HPS or from
armpit).
TE115
Waist Width – Back: TE130
Waist Seam Curve
Measure from seam to Depth:
seam at the point
designated on the spec With an imaginary line
(from HPS or from straight across from
armpit). waist / side seam
intersection.
TE116
Waist Width – @ Measure from the
Narrowest Point: imaginary line to seam
at Center Front.
Measure from edge to TE140
edge at waist narrowest Waistband Height:
point.
Measure from edge to
edge.
61
TE141 BV300
Waist Casing Height: Shirring Position From
S/S:
Measure from folded
edge to stitch. Measure from side
seam to start of
TE160 shirring.
Waist Seam Shirring
Width @ Front:
TE170
Waist Front Dart Length:
62
TE171 TE174
Waist Back Dart Length: Waist Dart Position –
Horizontal From CF:
Measure from Waist to
end of dart. Measure from center
front to dart along
Press dart seam at back waist.
panel towards center
back.
TE172
Waist Dart Depth: TE175
Waist Dart Distance
Measure dart width at Apart:
waist seam.
Measure from dart to
dart along waist.
TE173
Waist Dart Position –
Vertical From Bottom
Edge or Centered:
Hip:
Measure from bottom TF100
edge to dart. If Hip Position From HPS:
centered, there is an
equal distance from A/H Measure from HPS to
to dart and dart to specified hip placement.
bottom edge.
63
TF120
Hip Width – 2 Point
Measurement:
TF121
Hip Width – @ Yoke
Seam:
TF122
Hip Width – @ Seam:
64
Body Length: TG151
TG100 Bikini Top Panel Height
@ CB:
Body Length – HPS To
Bottom Edge:
Measure edge to edge
of panel.
Measure from HPS to
bottom edge.
65
TH100 TH105
Bottom Opening: Bottom Opening – With
Shirt Tails:
Measure from folded
edge to folded edge at Measure from fold to fold
bottom edge. at the top of the shirt tail.
TH101 TH106
Bottom Opening @ ___ Shirt Tail Width – Along
Up From Bottom Edge: Curve:
66
TH110
Bottom Opening –
Relaxed:
TH111
Bottom Opening –
Extended:
67
Bodysuit / 1-Piece: TL101
OPREF100 Trunk Length – From
Strap Join:
Crotch Point:
Measure from the strap
To determine the crotch
join seam / point to the
point position measure
crotch center. Crotch
½ the crotch width at
should be laid flat and
fold edge.
relaxed.
TL102
TL100 Trunk Length – Relaxed:
Trunk Length – HPS to
Crotch: Measure from HPS to
crotch point. Crotch
Measure from HPS to should be laid flat and
crotch point. Crotch garment should be fully
should be laid flat and relaxed.
relaxed.
TL103
Trunk Length – From
Strap Join – Relaxed:
68
TL120 TL210
Side Seam Length – Crotch Width:
Armhole To Leg
Opening: Measure from edge to
edge at crotch fold.
Measure from the
bottom of the armhole
to the top of the leg
opening. Crotch should
be laid flat and relaxed.
TL211
Crotch Width @ Seam:
TL121
Side Seam Length – Measure at crotch seam
Below Waist Seam: horizontally from edge
to edge.
Measure at side seam
from waistband to side
seam end.
TL212
Crotch Width @
Narrowest Point:
TL200 Measure at crotch
Hip Width – @ Top Of
narrowest point
Leg Opening:
horizontally from edge
Measure from edge to to edge.
edge at the top of the
leg opening binding.
69
TL215 TL225
Crotch Seat Curve Crotch Spacing – Edge
Height: To Edge:
Measure vertically @
center from leg opening
edge to crotch edge
70
TL228 TL245, BV104
Crotch Width @ Edge – Leg Opening Binding
End To End: Height:
TL240
Leg Opening:
71
TL252 TL281
Crotch Lining Length: Back Seat Deco Length
@ Inseam From Crotch:
Measure lining from
front edge to back Measure along crotch
edge. seam / placket edge:
from back rise seam to
decorative stitching or
seam.
TL280
Back Seat Deco Length
– Along Back Rise
From Crotch:
TL290
Measure along back Back Flap Pos Vertical -
rise seam: from crotch from CB Neck
seam to decorative Seam/Edge:
stitching or seam.
Measure from CB neck
seam/edge to top edge
of back flap.
72
TL291 TL300
Back Flap Curve Depth: Ankle Width – With Foot
– @ Upper Seam:
Measured from top of
back flap imaginary line Measure from fold to
to bottom of flap at side fold at the upper seam.
seam.
TL293
Binding Height – Back
Flap/Placket:
TL301
Ankle Width – With Foot
Measure from seam to
– 1" Up From Upper
edge.
Seam:
73
TL315
Footed Sole Width:
TL325
Footed Upper Width:
TL330
Footed Upper Height –
@ Side:
74
BM100B
SECTION FOUR: BOTTOMS – HOW TO MEASURE Waist Width Relaxed –
Full Elastic – At Bottom
Waist Stitch:
Waist: Line up front and back top
BM100 edges of WB evenly.
Waist Width Relaxed –
Full Elastic: Measure straight across
the waistband from edge
Line up front and back top to edge at the bottom row
edges of WB evenly. of waist stitching.
BM101
Measure straight across Waist Width Extended –
the waistband from edge Full Elastic:
to edge at the top of the
waistband. Measure from edge to
BM100A edge with elastic fully
Waist Width Relaxed – extended with fabric flat.
Full Elastic – At Waist
Seam:
75
BM103 BM107
Waist Width – Rigid Waist Width – Contour
Front: Waistband – @ Top
Edge:
Measure front waistband
from seam to seam. Line up front and back top
BM104 edges evenly.
Front Waist Width –
Excluding Side Rib Inset: Measure at the top edge
of the WB along the curve
Measure front waistband with tape on its side.
from seam to seam BM108
excluding the side rib. Waist Width – Contour
BM105 Waistband – @ WB
Waist Width – Relaxed: Seam:
76
BM120 BM210
Minimum Waist – Width # of Buttons / Snaps @
Stretched: Waistband:
77
BM220 BM262
Elastic Waistband Dart Depth – @
Height: Waistband Seam:
78
BM404 BM411
Knot Height – Tied: Drawcord Buttonhole Or
Grommet Position – @
Wearers Left:
BM410
Drawcord Buttonhole Or
Grommet Spacing: BM500
Waist Tab Width:
Measure from center of
buttonhole or grommet to Measure tab from edge
center of buttonhole or to edge.
grommet.
79
BM501 BN110
Waist Tab Height: High Hip Width – 3 Point
Measurement:
Measure tab from edge
to edge. Measure from edge to
center to edge, even with
BM502 the measurement points
Waist Tab Position: designated on the spec.
BN120
Measure the distance High Hip Position From
between the tabs from Crotch – 3 Point
edge to edge. Measurement:
BM503
To determine high hip
Waist Tab Position –
width measurement
Horizontal From S/S:
point:
Measure the distance 1. Measure from crotch
between the tab from seam up the rise to
side seam. the measurement
Hip: point designated on
the spec.
BN100 2. Measure remainder of
High Hip Position – 3 front rise to top of
Point Measurement:
WB. Use this length
for the measurement
To determine high hip
position at side seam
measurement point: from top of WB.
Measure from w/b top
edge down the rise and
side seams to the point
designated on the spec.
80
BN130 BN201
Low Hip Position From Hip Position – From
Crotch – 3 Point Waist Edge Along Side
Measurement: Seam – 2 Point
Measurement:
To determine low hip
width measurement Measure from waist
point: along side seams to the
measurement point
1. Measure from crotch designated on the spec.
seam up the rise to BN202
the measurement Hip Position – From
point designated on Crotch – 2 Point
the spec. Measurement:
2. Measure remainder of
front rise to top of Measure from crotch
WB. Use this length seam/front inseam facing
for the measurement edge up the rise to the
position at side seam measurement point
from top of WB. designated on the spec.
BN200
Hip Position From Crotch For styles with gussets
– 3 Point Measurement: measure from front
inseam facing edge.
To determine hip width
measurement point:
BN210
1. Measure from crotch Hip Width – 3 Point
seam up the rise to Measurement:
the measurement
point designated on With waist in its natural
the spec. position, measure from
2. Measure remainder of edge to center to edge at
front rise to top of specified position.
WB. Use this length
for the measurement
position at side seam
from top of WB.
81
BN211 BN216
Hip Width – 2 Point Hip Width – Extended –
Measurement (No Center 2 Point Measurement:
Seam):
Stretch the leg opening
Measure from side edge flat and measure hip with
to side edge. the elastic fully extended.
BN232
Hip Width @ Leg
Opening – On The
Curve:
BN212
Hip Width – 2 Point
Measurement: Rise, Gusset:
BN300
Measure from side edge Front Rise:
to side edge. With hip
relaxed. Measure from top of
waistband to rise / inseam
intersection.
82
BN430 BN511
Gusset Length – Along J-Stitch Length – Double
Inseam: Needle:
BN521
J-Stitch Width – Double
Needle:
83
BP101 BP200
Mid Thigh Position: Knee Position:
BP110
Thigh Width:
BP112
Thigh Width - with Gusset
84
BP215 BP221
Calf Position: Knee Panel Height – @
Side:
Measure from crotch point
to position designated on Measure from seam to
the spec. seam at the panel side
seam.
BP225
Knee Panel Position – From
Crotch:
BP216
Calf Width:
BP220
Knee Panel Height – @
Center:
85
BP230 BP250
Knee Dart Length: Zip Off Leg Position – From
Crotch:
Measure dart from seam to
end. Measure from crotch point
to end of zip off leg flange.
BP231
Knee Dart Depth: BP251
Zip Off Leg Flange Height:
Measure from seam to fold.
Measure from edge to stitch
or seam.
BP232
Knee Dart Position: BP252
Zip Off Leg Zipper Length:
Measure from dart to seam.
Measure the entire length of
the zipper from end to end.
BP233
Knee Dart Spacing:
86
BP260 BQ100 & BQ102
Leg Button Position Vertical Inseam
From Bottom Edge:
Measure from crotch point
Measure from bottom edge to end.
to center of button.
BQ101
Inseam – Including Trim:
BP265
Leg Button Position Vertical Measure the inseam from
From Waist Edge: the crotch point to the end
including the trim or hem
Measure from waist edge to detail.
center of button.
BQ104
Inseam – Footed 1-Piece –
Crotch To Sole Seam:
87
BQ105 BQ116
Inseam – With Gusset: Inseam Snap Placket
Width:
Measure from center of
gusset to end. Measure from edge to
stitch.
BQ106 BQ120
Inseam – With Cuff: # of Snaps – @ Inseam /
Crotch:
Measure from crotch point
to folded end with cuff Spec will note the number
folded up. of snaps. Worksheet will
note the details for Snaps
order.
BQ125
1st Inseam Snap/Button Pos
from CF
88
BQ130 BQ141
Out seam – Excluding Side Panel Overlay Width:
Waistband:
Measure from seam to
Measure from waistband seam.
seam to bottom edge.
BQ142
Side Seam Forward:
BQ131
Out seam – Including
Waistband Or Elastic:
BQ140 BQ144
Side Panel Width: Side Placket Length:
89
BQ145 BQ204 & BV209
# of Snaps @ Side Placket: Leg Bottom Opening –
Elastic (Relaxed):
Spec will note the number
of snaps. Worksheet will Measure from edge to edge
note the details for snaps at bottom of casing.
order. BQ205
Leg Bottom Opening –
Elastic (Extended):
BQ200
Leg Bottom Opening: Measure from edge to edge
at bottom of casing
Measure at bottom opening,
BV101 & BV200
edge to edge.
Cuff Height:
90
BV108 BV207
Leg Opening Cuff Facing Gator Distance Between
Height: Inside And Outside
Opening Edge:
Measure from bottom
joined edge to facing top
edge.
BV109
Roll Cuff Height:
BV205
Gator Length – Join
Seam To Bottom Edge:
Yoke / Dart:
Measure from leg / gator BT100
join seam to bottom Yoke Height – @ CB:
edge.
Measure from seam to
seam at center back.
BT101
Yoke Height – @ Side
Seam:
91
BT102
Yoke Height – @ CB –
Including Waistband:
Or point designated on
spec. Seam to seam.
BT103
Yoke Height – @ Side
Seam – Including
Waistband:
BT104
Yoke / Tier Height – @
CF – Including
Waistband:
Or point designated on
spec. Seam to seam.
92
Skirt: BW111
BW100 Sweep Width – Along
Curve:
Skirt / Skort Length –
Front:
Measure along bottom
edge hem curve from
Measure from the top of
side edge to side edge.
the waistband to bottom
edge at CF.
BX101
Overall Strap Width:
BW110
Measure strap from edge
Sweep Width – Straight:
to edge.
Measure straight across
from side edge to side
edge at bottom.
BX102
Overall Front Neck Drop:
93
BX103 BX110
Overall Back Neck Drop: Overall Diamond Inset
Width:
Imaginary line from HPS
to HPS. Measure horizontally
from edge to edge.
Measure from imaginary
line to edge.
BX104 BX111
Overall Bib Width: Overall Diamond Height
@ Center Back:
Measure along the top of
the bib from edge to Measure vertically from
edge. edge to seam.
BX106 BX112
Overall Bib Facing
Overall Diamond Inset
Height:
Height – @ Armhole:
Measure from top edge
Measure vertically along
of bib to the edge of the
side from seam to seam.
facing.
BX107
Overall Back Strap
Width: BX113
Overall Diamond Upper
Measure at the widest Peak Height @ Center:
point along diamond
inset seam. Measure vertically at
center from imaginary
line to top of diamond.
94
BX115 BX133
Strap Turn Back Length Overall Side Opening
(Overall): Placket Length:
BX130
BY100
Overall Armhole:
Trunk Length:
Measure from strap edge
Measure from HPS to
to waist.
crotch point. Crotch
should be laid flat and
relaxed.
BX131
Overall Waist Width:
95
Panty/Underwear/Diaper Cover/Swim BN230
Hip Position – Boxer:
Bottom/Swim Liner:
BM130 Measure up from the
Minimum Waist Opening crotch point to the
– (Swim): 1/2 designated point on the
Measurement spec.
96
BN302 BN402
Front Rise – To Crotch Back Rise – To Crotch
Fold: Fold:
97
BN600 BN604
Front Inset Width – @ Fly Opening Width:
Waist:
Measure horizontally
Measure inside binding inside binding from leg
from edge to edge below opening to fly binding
the waistband. edge.
BN601
Front Inset Width – @ BN605
Leg Opening: Back Inset Width – @
Waist:
Measure inside binding
from edge to edge at the Measure from edge to
leg opening. edge below the
waistband.
BN602
Fly Position:
98
BO101, BO109 BO105
Crotch Width – @ Mid- Crotch Width – Back –
Point Fold (Including Up From Crotch Fold:
Elastic):
Measure at the
Measure from edge to designated position from
edge along the crotch outside binding edge to
fold. edge at leg opening.
BO106
Crotch Width – Front –
@ Seam:
Measure at the
designated position from
outside binding edge to
edge at leg opening.
99
BO112 BQ206
Crotch Curve Depth: Leg Opening (Relaxed):
BO114
Crotch Seam Position – BQ208
Back – From Fold: Leg Opening – Relaxed:
100
BQ210 BQ221
Leg Bottom Opening – Leg Opening – (Swim):
With Binding:
Front and back leg
Measure along binding, opening edges lined up.
from edge to edge. With elastic straightened
and relaxed, measure leg
opening from edge to
BQ215 edge.
Leg Opening Height
BQ222
(Brief):
Minimum Leg Opening –
(Swim): 1/2
Measure from edge to
Measurement
edge.
Measure from edge to
edge with leg opening
BQ220 stretched.
Minimum Leg Opening Measurement must not
Stretched: be smaller than specified
amount on the spec
To determine if a garment sheet.
meets minimum leg
opening stretched. BU100
Measure from edge to Side Seam Length –
edge at leg opening with Bloomer:
the elastic fully stretched.
Garment is allowed to be Measure from top of
over the measurement but waistband to bottom of
never under the leg opening along the
measurement. curve.
101
UREF100
Crotch Point:
102
TA951A
SECTION FIVE: DETAILS FOR ALL GARMENT Back Neck Slit Length:
TYPES
Measure the opening from
inside edge to neck edge
vertically.
Keyhole Opening:
TA950, TD030
Keyhole Width: TA951B
Back Neck Slit Facing
Measure the opening from Width:
inside edge to edge
horizontally at widest Measure from slit edge to
point. facing edge.
TA952
Keyhole Height –
Including Binding:
103
TA953 TH202, BV100
Keyhole Button Position: Hem Height:
TH221
Bottom Opening Rib
Height:
104
TH222 TH230
Bottom Opening Hem Vent Overlap Depth:
Curve Height:
Measure from CB seam
Measure from bottom to edge of vent under lap.
edge at center to
imaginary line from TH231
bottom of side seam to Vent Length:
side seam
TH224 Measure from top of vent
Bottom Opening Casing to bottom edge. =
Height: TH237
# Of Snaps / Buttons Or
Measure from bottom Hook & Loop Tape @
edge to casing seam. Tab:
105
Ruffle/ Tulle: TK710
TH210 Tulle Ruffle Shirring Ratio
– 2:1:
Bottom Opening Ruffle
Height:
Body is 1:1 at bottom join
seam. Tulle stripe is
Measure from bottom
shirred 2:1.
edge to ruffle join seam
TK700
TH211, BV102 Tulle Ruffle Height:
Ruffle Height – Excluding
Elastic:
Measure tulle exposed
edge to bottom edge.
Measure from seam or
stitching to edge.
TK702
TH240 Tier / Ruffle Overlap
Peplum Height: Height:
106
TK720 TH213, DT095
Tulle Finishes ½" Above Ruffle Position:
Lining:
Use specified
Measure from tulle measurement on spec for
bottom edge to lining ruffle position from
bottom edge. Bottom edge or HPS.
DT090
Number Of Rows Of
TK721 Ruffles:
Tulle Finishes With
Bottom Edge Aligned Spec will indicate total
With Lining Bottom number of rows of ruffles.
Opening:
Pockets:
Tulle & Lining bottom Patch, Cargo, Kangaroo Pocket & Flaps:
edge are aligned. TJ100
Patch Pocket Width:
107
TJ101, BR500, BR600, TJ104, BR506, BR610,
BX120 BX122
Patch Pocket Height – At
Pocket Width – At Top: Center:
108
TJ142, BR704, BX126 BR615
Pocket Flap Height – @ Cargo Pocket Pleat
Center: Depth:
BR625
Cargo Pocket Inset
Width: @ Top
BR801
Shadow Pocket Height: Measure inset width at
top from seam to seam
Measure from stitch line
to stitch line at one side of If including trim (i.e.
the pocket. piping), measurement
does not include trim.
109
BR626 BR620
Cargo Pocket Inset Pocket Dart Length:
Width: @ Bottom
Measure dart length from
Measure inset width at seam to dart end.
bottom from seam to
seam
110
TJ111 BR511
Pocket Hem Height – @ Pocket Binding Height:
Center:
Measure from folded
Measure from top edge to edge to edge
seam at pocket center.
111
TJ300 TJ302, BR645, BR709
# Of Buttons / Snaps / Button / Snap / Hook &
Hook & Loop Pieces @ Loop Position Vertical:
Pockets:
Measure from edge to
Spec will note the number center of Button / Snap /
of snaps, buttons or hook Hook & Loop.
and loop pieces to order.
Worksheet will note the
balance of details for the
order.
BR708, BR641
# of Hook & Loop Pieces /
Buttons / Snaps At
Pocket Flap:
112
TJ315 BS202
Button / Snap / Hook & # Of Buttons At Tab:
Loop Position Vertical:
Spec will note the number
Measure from top of flap of buttons. Worksheet
to center of button will note the details for
button order
TJ320
BS203, BR643
Button / Snap / Hook &
Box Stitch Width:
Loop Position Horizontal:
Measure horizontally from
Measure from side of
stitch line to stitch line.
Flap to center.
TJ310
Bottom Pocket Hook &
Loop Size:
BS201 Measure hook and loop,
Tab Width:
vertical & horizontal for
specified length and
Measure horizontal tab
width.
from edge to edge
113
DT640 TJ401
Bottom Pocket Hook & Kangaroo Pocket Height
Loop Size: @ Side:
TJ400 TJ403
Kangaroo Pocket Height Kangaroo Pocket Width @
@ Center: Widest Point – Total:
TJ404
Kangaroo Pocket Width
@ Bottom – Total
Measure:
114
TJ405 TJ416
Kangaroo Pocket Width Kangaroo Pocket
@ Top – Half Measure: Opening Rib Height:
TJ417
Kangaroo Pocket Opening
TJ407
Binding Height:
Kangaroo Pocket Width
@ Bottom – Half
Measure binding from
Measure:
folded edge to seamed
edge of binding.
Measure from edge to
edge.
115
TJ710 TJ711
Pocket Opening– Along Pocket Opening Vertical
W/B Seam: Along Side Seam:
BR110 BR210
Scoop Pocket Opening Cord Stitch Height @
Height – @ Side Seam: Back Side Seam –
Excluding Waistband:
Measure from waistband
seam to pocket edge Measure from the WB
along side seam. seam to the bottom of the
stitch.
116
BS146 TJ701
Shadow Pocket Stitch On-Seam Pocket Bag
Position – Horizontal: Height:
BR200, TJ700
On Seam Pocket
Opening: TJ702
On-Seam Pocket Bag
Measure pocket opening Width:
from seam to seam
Measure pocket bag
width at widest point.
BR300
Coin Pocket Width:
117
BR305 BR320
Coin Pocket Length: Coin Pocket Hem Height:
BR306 BR400
Coin Pocket Length – Pork Chop Pocket Width
Extends to Bottom Of – @ Waist Seam:
Pocket Facing:
Measure along the
waistband seam from
side seam to pocket
edge.
BR310 BR402
Pork Chop Pocket Width
Coin Pocket Position – @
– @ Widest Point:
Waistband:
Measure from the side
Measure from the pocket
seam to the edge at the
edge to the waistband
widest point.
seam.
BR404
BR315 Pork Chop Pocket Length
Coin Pocket Position – @ – @ Tallest Point:
Side Seam:
Measure from the
Measure from pocket waistband seam to the
edge to the side seam. pocket edge at the widest
point.
118
BR406 TJ203
Pork Chop Pocket Length Welt Pocket Bag Width:
– @ Side Seam:
Measure pocket from
Measure along the side seam / stitch to seam /
seam from the waistband stitch.
seam to the pocket edge.
BR408
Pork Chop Pocket Curve
Depth:
BR902
Back Pocket Bag Height:
BR900, TJ200
Welt Pocket Width:
BR903
Measure from edge to Back Pocket Bag Width:
edge across the top.
Measure bag horizontal
BR901, TJ201
from seam to seam.
Welt Height:
119
BS300 BS303
Carpenter Pocket Height Carpenter Pocket Height
– Total Inner Height: – @ Bottom:
BS301 BS305
Carpenter Pocket Height Carpenter Pocket Width
@ Side Seam: @ Bottom:
BS310
BS302 Hammer Loop Width:
Carpenter Pocket Width –
@ Center: Measure from edge to
edge.
Measure
120
BS311 TJ121
Hammer Loop Length: Chest Pocket Position
Horizontal – Centered
Measure from side seam Between CF Imaginary
to bottom of pocket. Line and Armhole Seam At
Top Of Pocket:
Measure from CF
imaginary line and from
armhole seam to edge of
BS312 pocket. Both
Hammer Loop Position – measurements to be equal
From WB Seam Or Stitch: / centered.
TJ122
Measure from WB seam Chest Pocket Position
or topstitch to the top of Horizontal – Centered
the hammer loop at the Between Placket Edge
side seam. And Armhole Seam At
Top Of Pocket:
Pocket Placements: Measure from inner edge
TJ120 of placket and from
Pocket Position armhole seam to edge of
Horizontal – From CF pocket. Both
Imaginary Line OR From measurements are to be
Armhole Seam: equal / centered.
TJ125
Measure from CF or from Chest Pocket Position
armhole seam to edge of Vertical – From HPS To
pocket, as specified on Pocket Top:
spec.
Measure from HPS to
edge of pocket.
121
TJ126 TJ128
Patch Pocket Position Patch Pocket Position
Horizontal – From CF Vertical – From Bottom
Imaginary Line OR From Edge To Bottom Of
Side Seam: Pocket:
TJ127
Patch Pocket Position
Horizontal – Centered
Between CF Imaginary
Line And Side Seam At
Top Of Pocket:
TJ129, BS120, BS151
Bottom Pocket Position –
Vertical From HPS:
TJ130
Patch Pocket Position
Vertical Below Waist
Seam:
122
TJ131 & BS122 TJ211
Patch Pocket Position Welt Position Horizontal
Vertical From Armhole From CF To Upper
Edge / Seam: Corner:
123
TJ220 TJ704
Right Inside Chest On-Seam Pocket Position
Pocket Welt Position Vertical – From Bottom
Vertical From HPS: Edge:
124
BX128 BS105
Overall Bib Pocket Cargo / Side Pocket
Position – From Top of Position – Vertical From
Bib: Top Of Waist:
125
BS123 BS150
Back Pocket Position – Front Pocket Position –
Yoke Seam @ CB: Horizontal – Centered
Between S/S And "J"
Measure from yoke seam Stitch:
to top edge of pocket at
CB.
BS141
Back Pocket Position –
Horizontal From S/S:
BS124
Back Pocket Position – Measure from side seam
Yoke Seam To Outer to top of pocket edge.
Corner:
126
BS142 BS145
Cargo / Side Pocket Back Pocket Is Parallel
Position – Horizontal: To Back W/B Seam:
BR707
Pocket Flap Position –
BS143 Horizontal:
Cargo Pocket Position
Horizontal – 2/3rds
Measure from side seam
Forward:
to top edge of flap.
Place 2/3rds of pocket
forward from side seam.
BS147
Welt Pocket Position –
Horizontal – Centered On
BS144 Panel:
Cargo Pocket Position –
Horizontal – Center Over Center the pocket
S/S: between the side seam
and CB.
Equally center pocket
over side seam. BS148
Back Pocket Position –
Parallel To Yoke:
127
DT600 DT470, TE150
Pocket Position Tab Height:
Horizontal:
Measure edge to edge.
Measure point designated
in spec to edge of pocket. DT480
Tab Stitch Spacing:
DT610
Pocket Position Vertical: Measure stitch to stitch.
DT490
Measure point designated Tab Position Horizontal:
in spec to edge of pocket.
Measure from point
designated in spec to
edge of tab.
TE153
Waistband Tab Position
Tabs: Horiz From S/S:
DT460
Tab Length Measure from side seam
to tab seamed edge.
Measure edge to edge. TH236
Tab Width:
TE151, TH235
Waist Tab Length – @ Measure tab from edge to
Center: edge vertically.
128
DT500 BZ203, TK523
Tab Position Vertical: Bow Tail Angle:
129
BZ207, TK527, DT250 BZ208, TK528, DT260
Bow Position Vertical: Bow Position Horizontal:
BZ209
Bow Position Horizontal –
from CF Waist:
130
BZ212, TK531 DT270
Bow Position – Centered Bow Pos Horizontal –
On Height And Width Of Center Under Dart:
Waistband @ CF:
Center of bow should
align with dart end
horizontally.
TK532
BZ213
Bow Tab Width:
Bow Position – @ CF
Waist Seam:
Measure bow tab vertical
from edge to edge.
TK529 TK533
Bow Position Horizontal – Bow Tab Length:
@ CF Waist:
Measure bow tab
Place bow center front on horizontal from edge to
waist edge.
131
TK534 DT210
# Of Buttons / Snaps – @ Pleat Width
Bow Tab:
Follow spec sketch for
Spec will note the number pleat type. Measure from
of snaps, buttons or hook outer pleat folded edge to
and loop pieces to order. folded edge OR measure
Worksheet will note the from folded edge of pleat
balance of details for the to folded edge of next
order. pleat.
Pleats, Tucks and Darts:
TJ900, DT220
Pleat Depth:
TJ901
Measure folded pleat Distance Between Pleats:
depth from inside fold to
out side folded edge. Measure from pleat folded
edge to next pleat folded
edge.
TJ902
Pleat Position Horizontal
From CF:
132
TJ903, DT230 TJ912
# Of Pleats: Total # Pleats @ Sleeve
Cap:
Amount of pleats as
specified on spec sheet. Amount of pleats as
When none are specified specified on spec sheet.
follow sketch.
TJ904
Pleat Stitch Length: TJ920, DT180
Tuck Depth:
Measure length pleat is
stitched closed. Measure from stitch to
folded edge.
TJ910
Total Pleating Distance At
Sleeve Cap: TJ921, DT185
Distance Between Tucks:
Measure 1st to last pleat
at sleeve cap. Distance Measure from Tuck folded
specified on spec sheet. edge to next Tuck folded
edge.
133
TJ922 TJ931
Tuck Position Horizontal Dart Length:
From CF:
Measure dart length from
Measure from CF to 1st seam to end or dart end
tuck position as specified to dart end.
on spec sheet.
TJ92, DT190
# Of Tucks:
Trims/Bindings/ Elastics/Hook & Loop/
Tassel/Pom Pom:
Spec will indicate total DT020, BW120, BZ102
number of tucks. Binding / Trim Height:
134
DT040 DT075
Trim Position Vertical: Loop Trim Width:
DT045
Trim Position Horizontal:
DT110
Measure from point Scallop Height:
designated in spec to trim
edge. Measure highest point to
lowest point.
DT050 DT115
Trim Spacing: Scallop Width:
135
DT145 DT300
Hook And Loop Tape Tassel Length:
Diameter:
Measure from top of knot
Measure patch edge to to end.
edge at middle.
DT160, TA950,
TB208,TC323, TC805,
TE142, TL255, TH223,
BM203, BV208, BZ100 DT310
Elastic Height: Trim Loop Length:
DT280
Pom Pom / Ball / A/W
Diameter:
136
TK200 TK203
Sash / Tie Height: Back Sash Vertical Tack
Position From CB:
Measure tie / sash from
edge to edge vertically. Measure from center back
seam to sash tack
placement as specified.
TK325
Belt Height: TK204
Back Sash Vertical Tack
Measure belt vertically Position From S/S:
from edge to edge.
Measure from side seam
to sash tack placement as
specified.
TK202
Sash / Tie Length:
137
TK210 BM303
Back Sash / Tie Length Belt Loop Position Front –
From Tack Point, Untied: From Pocket Opening:
138
BM306A BM308
Belt Loop Position Front – Belt Loop Position Back –
Center On Front Panel: @ Sides:
If 2N topstitch at CB/back
rise, align beltloop edge
with CB/rise seam. TK310, TK320, DT350
Belt Loop Position Front
From Side Seam:
DT355
Belt Loop Position From:
139
TK311 TK330
Belt Loop Position Front: Belt Position Vertical
From Bottom Edge:
Aligned with Pocket
Opening Edge. Measure from bottom
edge to specified
measurement for belt
position.
TK316
TK305, DT340, BM310
Belt Loop Position
# Of Belt Loops:
Vertical
Spec will include total
Measure from specified
number of belt loops at
area to belt loop for
front and back.
placement.
TK317
Belt Loop Position
Vertical – from HPS
Lining:
140
TK600 TK610
CB Lining Pleat Depth: Sleeve Opening Lining
Ease Depth:
Measure from pleat fold to
seam. Lining is caught at sleeve
opening hem of shell.
The lining ease depth is
measured vertically from
the lining hem fold to the
join seam with shell.
TK620
TK601 Lining Body Length
CB Lining Pleat Starts ½" Finishes ½" Shorter Than
Down From Neck Seam Shell:
@ CB:
Measure from bottom
edge of body to bottom
edge of lining ½”.
141
TK621 TK631
Lining Body Length: Lining Bottom Opening:
TK640
Bottom Opening Lining
TK630 Ease Depth:
Lining Bottom Opening
Finishes 1” Narrower
Lining is set with shell
Than Shell (½” At Each
bottom hem. Measure
Side):
ease from lining fold to
hem join seam with body.
142
DT370 DT420
Eyelet / Grommet Position Button / Snap Spacing:
Vertical:
Measure center to center.
Measure from position
designated in spec to DT430
Center of eyelet / Number Of Buttons /
grommet. Snaps:
DT380
Eyelet / Grommet Spec will indicate total
Spacing: number of buttons or
snaps.
Measure from center to DT440
center. Buttonhole Position
DT390 Horizontal From:
Number Of Eyelets /
Grommets: Measure from point
designated in spec to
Spec will indicate total center of buttonhole.
number of eyelets or
grommets. DT450
DT400 Buttonhole Position
Button / Snap Position Vertical From:
Horizontal From:
Measure from point
Measure from point designated in spec to
designated in spec to center of buttonhole.
center of button.
DT410
Button / Snap Position
Vertical From: Topstitching/Quilting Details:
DT001
Measure from point
Topstitch Gauge:
designated in spec to
center of button.
Measure distance
between rows of stitching.
143
DT010 TK750
Topstitch Position: Quilting Height –
Rhombus / Diamond:
Measure from point
designated in spec to When quilting is in a
stitch. diamond pattern,
DT165 measure vertically from
Number Of Rows Of stitch intersection to
Elastic Threads: intersection.
TK751
Quilting Width – Rhombus
/ Diamond:
When quilting is in a
diamond pattern,
measure horizontally from
stitch intersection to
intersection.
If quilting is stitched
perpendicular, measure
along actual stitch-line
from stitch intersection to
intersection.
144
Costume/Novelty (ears, wings, tails) Details: TL415
TL400 Bottom Wing Width:
Back Wing Height:
Measure from edge to
edge at widest point of
Measure from edge to
bottom wings
edge at widest height.
TL450
Tail Position @ CB
TL405 Vertical From Bottom
Top Back Wing Width: Edge:
TL453
Tail Length:
TL410
Measure from seam to
Wing Position Vertical
seam or tail end.
From CB Neck Edge:
145
TL455 DT540
Tail Width – @ Widest: Ear Pleat Depth:
DT545, TB524
Ear Distance Apart:
DT520, TB252
Ear Height At Longest: Measure from ear edge to
ear edge.
Measure from top edge to
point of attachment at
longest length.
DT550
DT525 Ear Position From Fold:
Ear Width At Widest:
Measure from fold to point
Measure from edge to of attachment.
edge.
TB250
Horn Length:
146
TB251 TB257
Horn Width: Horn Position Vertical
From Hood Opening
Measure horn width at Edge:
widest point.
TB258
Ear Position Vertical From
Hood Opening Edge:
147
AW102 AW104A
A/W Position Vertical – A/W Position Vertical –
CF Or CB Neck Edge To HPS To Center Of Art:
Top Of Art:
Measure from HPS to
Measure from top of center of artwork.
neckband or binding to
top of artwork. Include
binding when applicable.
AW103
A/W Position Vertical –
CF Or CB Neck Seam To
AW105
A/W Position Horizontal –
Top Of Art:
Centered Between CF &
A/H Seam:
AW104
A/W Position Vertical –
HPS To Top Of Art: AW106
A/W Position Horizontal –
Measure from HPS to top CF To Edge Of Art:
of artwork.
148
AW107 AW112
A/W Position Vertical – A/W Position Horizontal –
Top Of Bib To Edge Of Side Seam To Edge Of
Art: Art:
149
AW118 AW123
A/W String Length – Artwork Evenly Spaced
Tacking Point To Toy End Apart:
– Not Exceeding: AW124
A/W Position Vertical – @
Measure from attachment Inside Placket From
point to end of toy, Bottom Edge:
including toy. It is not
allowed to exceed safety
standard.
AW119
A/W Position Vertical –
Center On Pocket Height:
AW125
Center the artwork on
A/W Position Vertical –
pocket. Below Waist Elastic At CF
To Top Of Art:
AW120
A/W Position Horizontal –
Center On Pocket Width:
150
DT710
Artwork Position
Horizontal – Center Under
Dart:
DT720
Artwork Position Vertical:
DT900
LID Position Horizontal:
151
BD150
SECTION SIX: ACCESSORIES Crib Bumper Binding
Height:
BD175
Crib Bumper Ruffle
Hem Height:
152
BD180 BD220
Crib Bumper Ruffle Skirt Drop Height:
Spacing:
Measure from seam to
Measure from center skirt bottom edge,
stitch to stitch. including trim (if any).
BD230
Skirt Hem Height:
BD200
Bed Skirt Deck Length: Measure from stitch line
to folded edge.
Measure from seam to
seam.
BD240
Skirt Hem Trim Height:
BD255
Skirt Ruffle Shirring
Ratio:
Ruffle is shirred at
specified ratio of spec.
153
BD260 BD300
Skirt Ruffle Hem Skirt Panel Height at
Height: Bottom:
BD450
BD280 Quilt Length Edge to
Skirt Ruffle Spacing: Edge:
Measure from ruffle
seam to seam.
BD290
Skirt Pleat Width:
BD295
Skirt Pleat Depth:
154
BD460 BD490
Quilt Width Edge to Quilt Edge Panel Stripe
Edge: Height:
BD500
Quilt Trim Height:
BD600
Fitted Sheet Deck
Length:
155
BD610
Fitted Sheet Deck Measure straight across
Width: from edge to edge
relaxed.
Measure from edge to BD700
edge. Pillow Sham Length
Seam to Seam:
BD620
Fitted Sheet Pocket
Depth:
BD710
Measure from edge to Pillow Sham Width
edge. Seam to Seam:
BD630
Fitted Sheet Elastic
Casing Height:
BD720
Measure from stitch to Sham Back Panel
edge. Inside Overlap Height:
BD640
Fitted Sheet Elastic
Length: Relaxed
156
BD730 BG001
Sham Back Panel Bag Width Position:
Overlap Hem Height:
Measure from seam to
Measure from stitch to point designated in
edge. spec to create
imaginary line.
BD740
Sham Back Panel BG002
Opening Position From Bag Width:
Edge:
Measure from seam to
Measure from seam to seam at point
opening edge. designated on the spec.
Bag:
157
BG003 BG006
Bag Width At Top: Bag Width At Widest:
BG100
Frame Height:
Measure frame
hardware from edge to
edge at widest.
BG005
Bag Width At Bottom:
BG200
Measure from seam to Bag Height:
seam at bottom.
Measure from top edge
/ seam to bottom seam
at position noted in
spec. For bags with
hardware, measure
from bottom of frame to
bottom seam
158
BG201 BG260
Bag Height At Middle: Bag Depth Position:
BG261
Bag Depth:
BG220
Bag Flap Height At
Measure seam to seam
Middle:
at point designated in
spec.
Measure from top edge
of bag to bottom edge
of flap.
BG240
Bag Bottom Panel
Height:
159
BG262 BG300
Bag Depth At Top: Bag Handle Width:
BG310
Bag Handle Length:
BG264
Bag Depth At Bottom:
160
BG340 BG350
Bag Strap Length: Bag Strap Length With
Adjuster:
Measure from point of
attachment to end OR Move adjuster as
measure from point of necessary to achieve
attachment to point of strap end to end
attachment. position in spec.
BG355
Bag Strap Length –
Fully Extended:
161
BG380 BG410
Lunchbox Clip Position Bag Pocket Depth:
From Bottom:
Measure from seam to
Measure from bottom seam.
seam to Clip Point of
Attachment.
BG400
Bag Pocket Width At
Middle: BG420
Bag Pocket Depth At
Measure from seam to Bottom:
seam at middle of
pocket. Measure from seam to
seam at pocket bottom.
BG405
Bag Pocket Height At
Center:
BG440
Bag Pocket Opening
Relaxed:
Measure from seam to
seam or seam to Top
Measure seam to seam
Edge when applicable
at top edge with elastic
at center of pocket.
relaxed.
162
BG441 WA001
Bag Pocket Opening Wallet Flap Height - @
Extended: Center:
BG500 WA002
Bag – Oval Base Width: Wallet Flap Height - @
Side:
Measure from seam to
seam at the widest Measure from fold to
point. edge.
BG501
Bag – Oval Base
Height: WA100
Wallet Width - Folded:
Measure from seam to
seam. Measure from edge to
edge.
BG510
Bag – Round Base
Diameter:
WA110
Measure from seam to Wallet Height – Folded:
seam.
Measure from fold to
Wallet: fold.
163
WA150 BE110
Wallet Length – Belt Keeper Position:
Unfolded:
Measure from buckle edge to
Measure from edge to keeper edge.
edge. BE150
Belt Hole Spacing:
Belt: Measure from hole center to
BE001 hole center.
Belt Length – Excluding Space holes evenly.
Buckle: BE180
Measure from folded edge or Space holes evenly. Holes to
be evenly spaced on belt.
end to end.
BE010 Bib:
Belt Length – Including BI001
Buckle: Bib Strap Width:
164
BI020 BI050
Bib CB Overlap Length: Bib Width – At Widest
Point:
Measure edge to edge
at CB overlap. Measure bib
horizontally at the
BI040 widest point from edge
Bib Width Position: to edge.
165
RC002
Rectangle Length:
166
Gloves / Mittens: GM021
GM001 2nd Finger Length:
Glove / Mitten Length:
Imaginary line across
the end of each finger.
Measure from top edge
to bottom edge at Measure from finger
longest point. edge to imaginary line
on designated finger.
GM002
Hand Length: GM022
3rd Finger Length:
Measure from top edge
to cuff elastic or cuff Imaginary line across
transfer at longest the end of each finger.
point.
Measure from finger
GM010 edge to imaginary line
Fingerless Hand on designated finger.
Length:
167
GM040 GM043
1st Finger Width: 4th Finger Width:
GM041
GM060
2nd Finger Width:
Glove Gusset Width:
Measure edge to edge
Measure seam to seam
at the center of the
at widest point
finger or at finger
opening edge.
GM070
Measurement Position
GM042 For Mitten Finger
3rd Finger Width: Width:
168
GM075 GM100
Measurement Position Convertible Mitten Flap
For Convertible Mitten Opening Width:
Finger Width:
Measure from seam to
Measure from top edge seam along the
to point designated to opening
create imaginary line.
GM105
GM090 Convertible Mitten Flap
Mitten Finger Width: Length:
GM120
Thumb Position:
GM095
Convertible Mitten
Mitten / Glove:
Finger Width:
Measure from the top
edge to base of thumb.
Measure from edge to
edge at the designated
Fingerless Glove:
point.
Measure from base of
2nd finger to base of
thumb.
169
GM130 GM140
Thumb Length: Thumb Width: at
Center
Imaginary line across
the base of the thumb. Measure at the center
of the thumb from edge
Measure at the center to edge.
of the thumb from edge
to imaginary line.
GM131 GM141
Thumb Length: Along Thumb Width: at Base
Top Edge
Measure at the base of
Imaginary line across the thumb from edge to
the base of the thumb. edge.
170
GM180 GM220
Sure Grip Height: Cuff Length:
171
GM300 GM340
Sleeve Length: Sleeve Width at Arm
Opening:
Measure edge to edge
at longest point. Measure from edge to
edge.
GM370
Sleeve Thumb Hole
Position:
GM320
Sleeve Width at Finger GM375
Opening: Sleeve Thumb Hole
Opening:
Measure from edge to
edge. Measure from edge to
edge at opening.
GM330
Sleeve Width at Middle:
When hat is
asymmetrical, measure
side to side at front
edge.
Chapter 6: Technical Design / © COPYRIGHT 2019
Subchapter: How to Measure Guide Janie and Jack Vendor Manual
November 2021
172
HA010 HA021
Inside Circumference ½ Inside Circumference –
Measurement – At Fold: Extended:
HA015 HA030
Inside Circumference: Inside Circumference –
Visor – @ Top Of Band:
Measure inside crown
along the brim seam. Measure inside upper
edge of the band.
HA032
Inside Circumference –
Visor – @ Bottom Of
HA020 Band:
Inside Circumference –
Relaxed: Measure inside lower
edge of the band.
Measure inside crown
along the hat opening HA060
edge with elastic Bottom Opening ½
relaxed. Measurement – At
Edge:
Flat measurement.
173
HA070 HA091
Bottom Opening ½ Mid Crown
Measurement Relaxed– Circumference:
At Edge:
Measure from edge to
Flat measurement. edge at the designated
point.
Measure brim seam to
CB edge with elastic
relaxed.
HA071 Crown / Overhead:
Bottom Opening ½ HA110
Measurement Dart Length:
Extended– At Edge:
Measure from dart end
Flat measurement. to dart end.
174
HA130 HA141
Crown Height – Beanie: Crown Height –
Unknotted:
Measure from the hat
top to the bottom or Measure from the top
folded edge. edge of hat to the
folded edge.
HA135
Crown Height – Bucket: HA150
Knot Height – Tied:
Measure from top
crown seam to brim Measure from the top of
seam. the crown to the tie end.
HA140
Crown Height –
Knotted:
HA151
Measure from the Knot Width – Tied:
bottom of knot to the
folded edge. Measure edge to edge
at middle of knot.
175
HA170 HA190
Crown Lining Height: Back Crown Height:
HA180 HA200
Front Crown Height: Crown Diameter –
Circular Crown:
Measure from the hat
top to the bottom edge Measure from seam to
at center front. seam across the center
of the hat.
HA210
Crown Width – Oval
Shaped Crown:
176
HA220 HA250
Crown Depth – Oval Overhead Length –
Shaped Crown: Side To Side:
HA260
HA240 Center Seam Length:
Crown Diameter –
Beret: Measure from center
front crown seam to
Measure over the top of center back edge.
the crown from edge to
edge. HA270
Overhead Length –
HA245 Bonnet:
Under Crown Height –
Beret: Measure from center
front brim seam to
Measure from edge to center back edge.
rib / band seam.
177
HA275 HA295
Face Opening – ½ Back Panel Height:
Measurement:
Measure from seam to
Flat measurement. edge.
HA300
HA280 Center Panel Width At
Panel Height: Top:
HA310
Panel Width
Measurement Position:
178
HA311 HA335
Panel Width: Back Panel Width At
Edge- Relaxed:
Measure from seam to
seam at the designated Measure seam to seam
point. with elastic relaxed.
HA336
HA320 Back Panel Width At
Center Panel Width At Edge- Extended:
Seam:
Measure seam to seam
Measure along the with elastic extended.
crown seam of the
panel seam to seam.
HA345
Number Of Panels:
HA330
Back Panel Width 1” Spec will indicate total
down from Top: number of panels on hat.
Measure from seam to HA360
seam at imaginary line
Visor Band Height – @
1” below panel seam at
Center Front:
top.
Measure edge to bill
Seam.
179
HA365 HA390
Visor Band Height – @ Band Overlap Height:
Side:
With the band unfolded.
Measure edge to edge.
Measure from the seam
to the fold point.
HA395
Band Height:
HA370
Visor Band Height – @ Measure edge to edge.
Back:
HA400
Bands / Brims / Bills: Sweatband Height:
HA380
Band Height – Folded: Measure edge to edge.
180
HA420 HA445
Rolled Band Height: Brim Circumference –
Half Measurement:
Measure from rolled
edge to edge. Measure from fold to
fold along the brim
edge.
HA425 HA450
Unrolled Band Height: Brim Overlap Width:
Measure from transfer Measure edge to edge
to edge. at brim / crown seam.
HA440
Brim Height: HA470
Bill Width:
Measure from the brim
seam to edge of the Measure from edge to
brim. edge at the bill / crown
seam.
181
HA475
Bill Depth:
182
Straps: HA515
HA490 Strap Position From:
Strap Width:
Measure from point
Measure from edge to designated to strap
edge. edge at insertion point.
Ear Flaps:
HA495 HA540
Strap Length: Ear Flap Height – From
CB Edge:
Measure from seam to
end. Measure from CB edge
vertically to ear flap
edge.
HA544
Ear Flap Width
Measurement Point:
HA510
Strap Position From To establish the correct
Bill: point of measure for the
ear flap width.
Measure from bill edge
to strap edge at Measure from ear flap
insertion point. edge up to the point
designated on the spec.
183
HA545
Ear Flap Width:
HA550
Ear Flap Width – @
Edge:
184
Keyholes / Back Elastic: HA900
HA570 Molded Hat
Keyhole Width: Measurement Points:
Measure point of
attachment to point of HA910
attachment. Molded Crown Width:
Molded Hats:
185
HA920 line.
Molded Crown Height: HA950
Molded Crown Width –
Establish imaginary Overhead:
lines at crease of mold.
Establish imaginary
Measure from point to lines at crease of mold.
point of the imaginary
line. Measure from point to
point over the top of the
HA930
crown.
Molded Crown Height
at Front:
HA955
Establish imaginary Molded Inside
lines at crease of mold. Circumference:
186
HA965
Molded Brim
Circumference – ½
Measurement:
187
Hair Accessories: HR060
Measure according to art work Headband End
Barrettes: Spacing:
dimensions as called out by design on
worksheet.
Measure edge to edge.
HR001
Curly Trim Relaxed:
188
HR115
Headband End Tip
Height:
HR125
Ear Pad Diameter:
189
Head Wraps: HR350
HR300 Head Wrap Casing
Head Wrap Band Length Extended:
Width:
Measure from seam to
Measure from edge to seam with the elastic
edge at CF. extended.
190
JE040
Bracelet / Necklace
Length:
191
Scarf: SC040
SC001 Scarf Length:
Scarf Width:
Measure straight across
vertically from edge to
Measure straight across
edge.
horizontally from edge
to edge.
SC050
Scarf Holder Loop
SC010 Width
Scarf Width at Widest:
Measure edge to edge.
Measure straight across
horizontally from edge
to edge at widest point.
SC055
Scarf Holder Loop
Length
SC020
Scarf Width at__: Measure edge to edge.
192
SC065
Scarf Holder Loop
Position Vertical:
193
Sock: SK030
SK001 Sock Foot Width:
Sock Opening:
Measure from edge to
edge at center of foot.
Measure from edge to
edge at opening.
SK040
SK010 Heel Width:
Sock Opening – With
Cuff: Measure from point to
point.
Measure from edge to
edge at opening inside
the cuff.
SK050
SK020 Heel Depth:
Sock Leg Width:
Measure from point to
Measure from edge to point.
edge at center of leg.
194
SK060 SK120
Foot Length: Sock Cuff Height:
SK140
Sock Rib Height:
SK100
Leg Warmer Length: Measure from rib
transfer to edge.
Measure edge to edge.
SK150
Sock Rolled Cuff
Height:
195
SK160 TI020 & TI140
Sock Ruffle Height: Tie Width – @ Widest
Point:
Measure from seam /
point of attachment to Measure from edge to
edge. edge at the widest
point.
SK180
Sock Cuff Tipping
Height: TI040 & TI150
Tie End Length:
Measure edge to edge.
Create imaginary line at
the widest point.
Tie:
TI001
Tie Length:
196
TI050 TI080
Tie Loop Position: Tie Strap Width:
197
TI130 TT030
Tie Length – Back Non- Back Panel Width At
Functional: Waist Seam:
TT030A
Back Panel Width At
Widest: Seam to Seam
198
TT060 TT100
Hip Position – From Front Rise – Tights:
Crotch – 2 Point:
Measure from
Measure from crotch waistband edge to the
seam / fold up rise to crotch point.
the measurement noted
in spec.
TT070
Hip Width – Tights:
TT110
Back Rise – Tights:
TT090
Knee Width – Tights: Measure from
waistband edge to the
Measure from edge to crotch point.
edge at half of the
inseam.
199
TT115 TT125
Back Rise – Tights – Inseam – Tights – With
With Back Panel: Back Panel:
TT120
Inseam – Tights:
TT130
Measure from the Inseam – Tights –
crotch seam to the toe Footless:
end.
Measure from the seam
to the end including
trim.
TT140
Bottom Opening:
200
TT145 TT180
Bottom Opening Ruffle Position – Tights:
Tubular / Rib Height
Measure from the
Measure from bottom waistband edge to the
edge to transfer. top of ruffle seam.
TT150
Foot Width – Tights: TT190
Number of Ruffle Rows:
Measure from edge to
edge at the center of Spec will indicate total
the foot. number of rows of
TT160 ruffles.
Foot Length – Tights:
201
Chest: Armpit to armpit (A to B). Waist – 2-Piece: Measure width at both bottom / sweep of the
upper piece and the top of the lower piece (C
to D).
Waist – 1-Piece: At narrowest location between armpits Seat / Hip: @ 4” above bottom of crotch (straight 2-point
and crotch (C to D). measurement) (L to M through K).
Waist – 2-Piece: Measure width at both bottom / sweep of Thigh: @ 1" below crotch or center of gusset (N to O).
the upper piece and the top of the lower
piece (C to D).
Upper Arm Position: Vertical from designated point – as Ankle: Measure the width of the end of the leg if
outlined in CPSC regulations (G to H). intended to extend to ankle (P to Q).
Upper Arm: Perpendicular to outer sleeve at above
location (H to I).
Wrist: Measure the width at the end of the
sleeve (E to F).
202
Outsole Length: Front Vamp Length:
Outsole Width:
203
Back Counter Strap Heel Height:
Height From Sole:
Measure heel from top
Measure from sole to edge to bottom edge.
back strap at top edge. Outsole should be
included in this
measurement.
Outsole Height:
204
Toe Post Position From Strap Position: CB to
Sole Edge: strap edge along top
line
Measure from edge of
sole at front to point of Measure along top line
insertion of toe post. from CB to strap edge.
Strap Width:
205
Velcro Hook Length:
Bow Width:
Lace Length:
206