Professional Documents
Culture Documents
RT 674 Flow Level Control Demonstration Unit Gunt 1241 PDF - 1 - en GB
RT 674 Flow Level Control Demonstration Unit Gunt 1241 PDF - 1 - en GB
RT 674
Flow / level control demonstration unit
Learning objectives/experiments
Description
• experimental introduction to con- The flow control then provides optimum This enables external recording equip-
trol engineering using an example adjustment of the controlled variable to ment, such as a plotter or an oscillo-
of flow and / or level control the reference variable (set value). scope, to be connected.
• two controllers permit control in
cascade mode All components are clearly laid out on a An instrumentation and control soft-
• construction of the system with vertical panel. The large-format process ware (RT 650.40) with interface module
components commonly used in in- scheme provides an aid to understand- (USB) is available as an accessory. This
dustry ing. A pump delivers water from a stor- enables the key process variables to be
• digital controllers with freely se- age tank into a piping system which con- represented, and control functions ex-
lectable parameters: P, I, D and tains a rotameter. From there the water ecuted.
all combinations passes into the transparent level-con-
• optional I&C software RT 650.40 trolled tank. The level is measured by a
via USB pressure sensor installed at the base of
the level-controlled tank. The controllers
The experimental unit provides a com- used are two state-of-the-art digital in-
prehensive experimental introduction to dustrial controller. The actuator in the
the fundamentals of control engineering control loop is an electromagnetic pro-
using an example of combined flow and portional valve. Ball valves in the tank
level control. The level and flow rate can outlet and in the pipe system enable
be controlled individually and as a cas- defined disturbance variables to be gen-
cade. In cascade mode the level is the erated. The controlled variable X and the
primary controlled variable. manipulating variable Y can be tapped
as analogue signals at lab jacks.
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 1/3 - 04.2022
gunt
RT 674
Flow / level control demonstration unit
Specification
Technical data
Storage tank
• stainless steel
• capacity: 15L
Pump, 3-stage
• power consumption: 90W
• max. flow rate: 83L/min
• max. head: 6m
Scope of delivery
1 experimental unit
1 set of laboratory cables
1 set of instructional material
Screenshot of optional I&C software RT 650.40: step response to change in level refer-
ence variable with PID controller (acceptable control quality)
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 2/3 - 04.2022
gunt
RT 674
Flow / level control demonstration unit
Optional accessories
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 3/3 - 04.2022
Powered by TCPDF (www.tcpdf.org)