Professional Documents
Culture Documents
Level FB Type
Level FB Type
& Board Tank Gauge ‐ FBG
An economical, easy to install gauge for level indication of
liquids in bulk storage tanks under atmospheric condition.
Salient Features
Durable aluminum powder coated gauge board
Gauge board markings visible from distance
Options
SS304, SS316, PP or ECTFE coated SS to suit various
liquids
Half travel gauge board for underground tanks
Seal pot for fuming liquids
Adjustable alarm switches (max 4)
Volumetric calibration in Litres or KL or BBL
Construction & Operation
1. Guided : (fig 1) It consists of a float connected to a
pointer through a rope via a set of pulleys. The pointer with
nylon roller glides smoothly over a calibrated gauge board,
positioned parallel to the tank. The float accurately follows
liquid level variations in vertical direction. The horizontal float
movement is restricted between two guide wires firmly
anchored to tank bottom. As such, the pointer is in ‘TOP
POSITION’ when tank is ‘EMPTY’ and in BOTTOM POSITION’
when ‘FULL’. The pointer indicates level. The gauge board is
supplied in 1 meter sections and multiple gauge boards are
connected through gauge board brackets as per ordered
measuring range.
Applications : Liquid with moderate turbulence.
2. Unguided : In this construction the float movement is not
restricted through the guide wire as its movement is
negligible.
Applications : Liquid with minimum turbulence.
1
Typical Installation
Fig 1. Gauge board with Full Travel Mounted Fig 2. Gauge board with Full Travel Mounted
on Side of Ground Level Tank on Side of Elevated Tank
Horizontal Limb
Process Flange Conduit Support
Pulley
Enclosure Tensioners
Conduit Tensioner
Support Flange
Vertical *Guide
Limb
0
Nozzles Alarm
10 Overhead
*Measuring Tank Switches
20
Pointer
Nozzles
Measuring
40 Wire Rope
Pull Chain
Gauge
50
60
Guide Wire TANK
Board
Ropes
Manhole
Gauge Bracket
100 Float Knob Support
Gauge 10
Board Float
20
30
40
Rope Guide
50
Gauge
Bracket
Support Anchor
Anchor GND Level
Fig 3. Gauge board with Full Travel Mounted Fig 4. Gauge board with Half Travel Mounted
below Elevated Tank on Underground Tank
Conduit
Extension H
Overhead
Conduit Support 2
Tank *Socket
*Protecion Conduit
Extension
*Pole
*Socket GND Level
Gauge Bracket
Support
H
Underground
Tank
Gauge
Board
GND Level
*Customer scope 2
Components and Subassemblies Assembled at Site
Floats Conduit Support
Gauge Boards
(A)
(A) (B)
(B)
A) Full Travel B) Half Travel 300
50 25
CMS CMS
Rope guides 150 Ø7x2 Nos
PP
10 20 SS
L = 1 mtr
40 80
50 100 Tensioner Gauge Bracket Gauge Bracket
Support
60 120
1"x1"x1/4"
70 140 Tension
spring MS Angle
10 x 2 Nos
80 160 Enclosure
115
90 180 Flange 1"x1"x1/4"
150 150
Spring 75
110
25
Pointers
Adjustable Alarm Switch
For Full Travel Gauge Board For Half Travel
Gauge Board
(C) Mounting Bolts
(A) (B)
Mtg.Bracket
Pulley
Termination
P NO NC
5A/230VAC
Switch
Cable Gland
With Pull Chain
3
Accessories Gauge Board Mounting
1. Counter Flange
(To be welded to tank nozzles) Conduit Support
Gauge Bracket
Support
Gauge Board
Bracket
CMS
10
Bolts
20
40
Nuts &
(To be welded to tank) 50 washers
Gauge 60
Board
70
Guide Measuring Guide
Nozzle Nozzle Nozzle
80
90
3/4"NB ASME
150 # Flange
150 d d 3/4"NB, Pipe
100
TANK
10
d=150 (Ø200m Float), 225 (Ø350 Float)
Specifications
Construction Guided Unguided
1. 7.5 meters with Ø200 float 3 meters with
Range
2. 15 meters with Ø350 float Ø200 float
Installation Ground level tank or underground tank or elevated tank
Liquid SG ≥ 0.8
Max Temperature 80 ⁰C (PP), 100 ⁰C (ECTFE Ctd SS), 150 ⁰C (SS)
Max Pressure Atmospheric
Float SS304/316/316L, PP, ECTFE (Hallar) coated SS304/316 x Ø200 or Ø350
Float/Guide Wire SS304/316/316L, PTFE ctd SS304/316 x Ø 1.6 mm (multistrand)
Rope PP x Ø3 mm (multistrand)
Process/Tensioner
CS, CS A105, PP, SS304 or SS316
Connection MOC
Process Connection ¾” or 1” or 1‐1/2” NB ASME 150# flange
Tensioner Connections ¾”or 1” or 1‐1/2” ASME 150# flanges (2 nos.) Not Applicable
1. Cadmium pltd. steel spring in CS powder coated or PP enclosure
Tensioner (2 nos.) 2. SS304 spring housed in SS304 enclosure Not Applicable
3. SS316 spring housed in SS316 enclosure
4
1. 6” wide, white powder coated Aluminum or SS304 MOC with black graduations and
numerical markings in black (minor) per 10 cm and in red (major) per 100 cm (34 mm
Calibrated Gauge height) for full travel.
Board 2. As above, but numerical markings in black (minor) per 20 cm and in red (major) per 200
cm for half travel.
3. Volumetric scale in Litres or KL or BBL on request.
Resolution (Gauge
5 mm (full travel), 10 mm (half travel)
Board)
Red powder coated CS or SS304
Pointer
Pointer height = 60 mm for 7.5 meters range and 80 mm for 15 meters range
1. Full for ground level, elevated tanks and underground tanks (< 4 meters)
Pointer Travel
2. Half for underground tanks from 4 to 8 meters depth
Pull Chain Nylon rope with PP handle for highly viscous liquids which tend to solidify at ambient temp
¾” x GI or PP or SS304 pipe MOC
Protection Conduit 1. Two vertical limbs of 285 & 195 mm
2. One horizontal limb of 650 mm
1. Cadmium plated steel with PTFE bush & SS shaft in powder coated cast Al enclosure (WP)
2. PP pulley with PTFE bush & SS shaft in PP enclosure (WP)
Pulley & Pulley
3. SS304/316 pulley with PTFE bush & SS shaft in WP Cast Al. powder coated enclosure (WP)
Enclosure (2 nos)
4. SS304 pulley with PTFE bush & SS shaft in SS304 enclosure (WP)
5. SS316 pulley with PTFE bush & SS shaft in SS316 enclosure (WP)
1. Welded : SS304/316/316L plate , 25 W x 6 Thick (metallic tanks)
2. Weighted : SS304/ 316/ 316L or ECTFE coated SS304 pipe (1” NB)
Anchor
or PP 50 mm OD Not Applicable
Note : Length of anchor = 300 (Ø200 float) and 450 mm (Ø350 float)
Rope Fasteners SS316
Gauge Board Brackets Powder coated steel
Conduit Support MS
Gauge Bracket
MS
Support
1. 50 mmWC ‐ Cast aluminum/ SS316/ PVC coated cast aluminum
Seal Pot
2. 200 mmWC ‐ CS or SS316
Adjustable Alarm
Micro switch, mono‐stable, SDPT x ABS enclosure IP65, Switch rating‐ 5A, 250VAC
Switches
One to four numbers (max)
1. Counter flanges (CS), nuts, bolts (CS) & CAF gaskets
Accessories
2. Measuring/ guide nozzles with flange (CS), nuts, bolts (CS) & CAF gaskets
5
Model Identification
FBG ‐
1. Construction x Pointer Travel
Guided x Full Travel F
Guided x Half Travel H
Unguided x Full Travel U
2. Float MOC
SS304 N
SS316 S
SS316L L
PP P
ECTFE coated SS304 H
ECTFE coated SS316 V
Others O
3. Float Size
Ø 200 mm 1
Ø 350 mm 2
4. Seal Pot
Without W
50 mmWC x Aluminum 1
50 mmWC x SS316 2
50 mmWC x PVC coated Aluminum 3
200 mmWC x CS 4
200 mmWC x SS316 5
Others O
5. No. of Alarm Switches
Without W
One…… Four 1..4
6. Installation
Ground Level Tank G
Under Ground Tank (Sump) U
Elevated Tank H
7. Calibrated Gauge Board x Pointer MOC
Aluminum Gauge Board x CS Pointer 1
Aluminum Gauge Board x CS Pointer with Pull Chain 2
SS304 Gauge Board x CS Pointer 3
SS304 Gauge Board x CS Pointer with Pull Chain 4
SS304 Gauge Board x SS304 Pointer 5
SS304 Gauge Board x SS304 Pointer with Pull Chain 6
8. Process/ Tensioner Connection MOC
CS M
CS A105 A
SS304 N
SS316 S
PP P
Others O
9. Process Connection
¾” NB ASME 150# Flange 1
1” NB ASME 150# Flange 2
1‐1/2” NB ASME 150# Flange 3
Others O
6
10. Tensioner Connections (2 nos.)
Without (Unguided) W
¾” NB ASME 150# Flange 1
1” NB ASME 150# Flange 2
1‐1/2” NB ASME 150# Flange 3
Others O
11. Tensioner (Spring + Enclosure)
Without (Unguided Construction) W
Cadmium plated Steel Spring x CS powder coated Enclosure 1
Cadmium plated Steel Spring x PP Enclosure 2
SS304 Spring x SS304 Enclosure 3
SS316 Spring x SS316 Enclosure 4
Others O
12. Protection Conduit
GI x ¾” NB Protection Conduit 1
SS304 x ¾” NB Protection Conduit 2
GI x ¾” NB Protection Conduit with Extension (Elevated or Underground Tanks) 3
SS304 x ¾” NB Protection Conduit with Extension (Elevated or Underground Tanks) 4
PP x ¾” NB Protection Conduit 5
Others O
13. Pulley x Pulley Enclosure
Cadmium plated steel Pulley x Cast Al powder coated Enclosure 1
SS304 Pulley x Cast Al powder coated Enclosure 2
SS304 Pulley x SS304 Enclosure 3
SS316 Pulley x Cast Al powder coated Enclosure 4
SS316 Pulley x SS316 Enclosure 5
PP Pulley x PP Enclosure 6
14. Anchor
Without (Unguided) W
SS304 x Welded A
SS304 x Weighted B
SS316 x Welded C
SS316 x Weighted D
SS316L x Welded E
SS316L x Weighted F
PP x Weighted G
ECTFE coated SS304 x weighted H
15. Accessories
Without W
Counter Flanges (CS) + Nuts, Bolts (CS) + CAF Gaskets F
Measuring/Guide Nozzles with Flange (CS) + Nuts, Bolts (CS) + CAF Gaskets N
Others O
Ordering Information
Model No x Range x Service Liquid and its Specific Gravity, Operating Temperature & Pressure
Add: Premier Total Solution Co., Ltd.
Pune Techtrol Pvt Ltd [CIN : U31909PN1991PTC063403] 594, 596 Soi Rama 2 Soi 60,
Samaedam,Bangkhuntien,
S‐18, MIDC, Bhosari, Pune ‐ 411026. India. Ph: +91‐20‐66342900, ho@punetechtrol.com, www.punetechtrol.com
Bangkok 10150 Thailand
Tel : 02-4155818-20
Works: J‐52/7, MIDC, Bhosari, Pune ‐ 411026. India +91‐20‐67313600
E-mail : info@ptssolution.com
Web : www.ptssolution.com
Facebook : DiaphragmSeal 7
CAT/0006 /REV 11/02‐2020