Professional Documents
Culture Documents
Heliocentris Academia International GMBH EN 2020
Heliocentris Academia International GMBH EN 2020
ACADEMIA OFFERING
Fuel Cells
Energy Management Renewable Energy Efficiency Power to Ga
Heliocentris Academia – Your Partner for Instruction
in Renewable Energies, Energy Storage and Energy Management.
ACADEMIA OFFERING
2 PREFACE
Heliocentris Academia International
Training Products for Schools, Universities and Research Institutes
SCHOOL LEVEL
Professional Page 06
HyDrive Page
Page
09
10
11
Fuel Cell Trainer
13 14
12
TABLE OF CONTENTS 3
3
Model Car
SCHOOL LEVEL
A Science & STEM Focussed Solar & Hydrogen-Fuel Cell Car Kit
Powered by water and sunlight, the Model Car is a vivid NGSS &
STEM Aligned
introduction to the topic of renewable energies. With
pre-configured experiments and a curriculum-oriented
instruction manual, the contents of solar, hydrogen and
fuel cell technology can be easily communicated.
Key Features
» Design of fuel cells and solar cells
» How to measure the current and the voltage of the fuel cell
» Up to 5 students can work with the Model Car at the same time COMPONENTS
A tten ti
Mo
odel Car
e d ata
is o n
ly p
Model Car
er m
itte
dw
ith
wr
itte
na
pp
ro
val
by
LE
CH
UZ
A,
wr
ite
to
pr @
lech
uza
.com
| 06.
13 /J T | P
r i n t e d i n Ge r m a n y
Model Car
is available
Product Options as bundle.
Sample Experiments
Model Car Complete Model Car Demo Page 7
» Energy conversion
» How to measure the current and the voltage
Demonstrating the Dr FuelCell® Model Car
The fuel cell is now connected to the energy source and will immedi-
ately start producing hydrogen and oxygen.
The measurement box enables quan- Numerous simple demonstration experiments
When the hydrogen has filled the whole storage cylinder:
» Load measurement box for measuring current and voltage 11. With the red and black terminals facing towards the front of the
car, place the reversible fuel cell into the notches on the model
car until it audibly clicks into place.
» Chassis » Chassis
» Measurement of electrical charge
» Instruction material with Experiment » Instruction material with Experiment Guide
» Various load settings possible for measuring the effect Demonstrating the Dr FuelCell® Model Car
TIP
Producing 5. Plug the red banana jacks (1, 3) of the red patch cord into the
hydrogen red (positive) banana jack terminals of the solar panel (1) and the
» 6. Repeat step 5 with the black patch cord (2, 4) and the negative
terminals.
7. Turn on the light.
Accessories
Lamp Lamp for operating the solar cell Art. no. 314
Dimensions (W x H x D): 345 x 160 x 280 mm, weight: approx. 2.9 kg.
*Only included with Model Car Complete.
4 MODEL CAR
Science Kit
SCHOOL LEVEL
A Science & STEM Focussed Solar & Hydrogen-Fuel Cell Kit
The Science Kit is an extensive experiment set for the NGSS &
subject of renewable energies. 20 pre-configured exper- STEM Aligned
Key Features
» Basic design of fuel cells and solar cells
» Up to 5 students can work with the Science Kit at the same time
» Suitable for communicating subject matter from physics, chemistry COMPONENTS
hand generator
» Conversion of solar energy to electronic energy and hydrogen
FARADAY- und Energie-
E z2 wirkungsgrad der
» Material:
Zerlegbare Brennstoffzelle mit Membran
2
0,3 mg/cm Pt sowie Wasserstoff- und
Sauerstoffendplatte montiert nach
Aufbauanleitung
Zusätzliche Komponenten:
Elektrolyseur Lampe 100-150 Watt
Destilliertes Wasser
Durchführung:
A V R Scieence Kit
A tten ti
Scien
nce Kit
+ -
e d ata
»
is o n
ly p
0 ml ml 0
Science Kit
er m
2 2
itte
4 4
dw
6 6
8 8
O2 H2
ith
10 10
wr
O2 H2
itte
na
pp
ro
val
by
Elektrolyseur LE
CH
UZ
A,
Brennstoffzelle wr
ite
to
pr @
lech
uza
.c om
| 06.
13 /J T | P
r i n t e d i n Ge r m a n y
STORAGE BOX FUEL CELL COMPONENTS* INSTRUCTION MATERIAL WITH EXPERIMENT GUIDE
AND CD
Science Kit
is available as
Product Options a bundle.
Sample Experiments Science Kit Complete Science Kit Demo Page 7
» Examination of solar cells and their efficiency
E z1
Basic experiments and in-depth A variety of basic experiments for
Kennlinie der Brennstoffzelle
+
V
-
R
+ -
+ -
O2
ml
Elektrolyseur
ml 0
2
4
6
8
10
H2
O2 H2
Brennstoffzelle
» Electrolyzer » Electrolyzer
» Fuel cell » Fuel cell
» Investigation of the electrolyzer: Does current increase © Copyright 2002 heliocentris
0,8
0,7
Spannung in V
0,6
0,5
0,3
0,2
Katalysator 0,1 mg
0
0 100 200 300 400 500
» 300
250
200
Leistung in mW
150
100
0
0 100 200
Strom in mA
300
Katalysator 0,1 mg
Katalysator 0,3 mg
400 500
Art. no. 355 Art. no. 350
Die Interpretation der Ergebnisse ist zusammenfassend in Anleitung z6 beschrieben.
SCIENCE KIT 5
Professional
SCHOOL LEVEL
Key Features
» Demonstration unit for classroom-style teaching
COMPONENTS
» Suitable for communicating subject matter from physics,
chemistry and technology curricula
» Basic design of fuel cells and solar cells
» How to measure the current and the voltage of the fuel cell and electrolyzer
» Energy storage and use of renewable energies
Professsional
SOLAR PANEL DOUBLE FUEL CELL ELECTROLYZER
Chemical reactions of the entire energy conversion chain
A tten ti
f
»
on: Use and replication of the imag
Profess
P f sionall
ACADEMIA OFFERING
e d a ta
is o n
ly p
Professional
er m
itte
dw
»
wr
itte
na
pp
ro
val
by
LE
CH
UZ
A,
wr
ite
to p
r@
lech
uza
.com
| 06
.13 /J T | P
r i n t e d i n Ge r m a n y
Product Options
Sample Experiments
Professional Complete Professional Demo
» Examination of solar cells and their efficiency
Experimentvariationen: Visualization of measurement data Numerous descriptive demonstration
How to determine the tilt angle of solar cells
Sie können den Einfluss der Lichtintensität auf die Leistung des
Bei einem Abstand von 20 cm darf das Solarmodul nur für die
Dauer der Messung beleuchtet werden! by the measuring unit experiments for physics, chemistry and
Tragen Sie P über U auf und vergleichen Sie mit dem P-U-Diagramm bei
einem Lampenabstand von 30 cm.
1500
Abstand 20 cm
Abstand 30 cm
Abstand 40 cm
technology lessons
Leistung / mW
1000
0
0 0,5 1 1,5 2 2,5
Spannung / V
»
Messgerät
+ - M
V
+ -
A
R
3.
Bauen Sie eine Anordnung nach Bild s1b auf.
Lampe
Leuchten Sie das Solarmodul mit einer Lampe gut aus (Abstand Lampe-Solarmodul etwa 30 cm,
der Strom sollte im Kurzschluss etwa 700 mA betragen).
Warten Sie ca. 5 Minuten bis sich das Modul erwärmt hat und die Kennlinie bei einer relativ
Art. no. 392 Art. no. 391
gleichmäßigen Temperatur aufgenommen werden kann.
4. Beginnen Sie mit der Messung des Kurzschlussstromes (überbrückte Widerstände) und messen
Sie dann die Werte für Spannung und Stromstärke bei unterschiedlichen Widerständen (0,3, 0,5,
»
» Characteristic curve of an electrolyzer and © Copyright 2000 heliocentris -4- Experiment s1
Dimensions (W x H x D): 600 x 840 x 460 mm, weight: approx. 10.1 kg.
1
Measuring unit only included with Professional Complete.
6 PROFESSIONAL
Classroom Sets and Instruction Material
SCHOOL LEVEL
The affordable offer for the entire class.
The classroom sets are designed for use
by six groups of four students each. 1
+ + Scieence Kit
+ + Scieence Kit
A tten ti
A tten ti
Scien
nce Kit Scien
nce Kit
on: Use and replica tion of the imag
e d a ta
is o n
is o n
ly p
ly p
Science Kit Science Kit
er m
er m
itte
itte
dw
dw
ith
ith
wr
wr
itte
itte
na
na
pp
pp
ro
ro
val
val
by by
LE LE
CH CH
UZ UZ
A, A,
wr wr
ite ite
to to
pr @ pr@
lech le ch
uza uz a
.com .c om
| 06. | 06.
13 /J T | P 13 /J T | P
r i n t e d i n Ge r m a n y r i n t e d i n Ge r m a n y
Scieence Kit
A tten ti
+ +
Scien
nce Kit
on: Use and replica tion of the imag
ACADEMIA OFFERING
e d ata
is o n
ly p
Science Kit
er m
itte
dw
ith
wr
itte
na
Mod
del Car
pp
ro
val
by
LE
CH
A tten ti
UZ
A,
wr
ite
to
Mo
odel Car
pr @
on: Use and replication of the imag
lech
uza
.com
| 06.
13 /J T | P
r i n t e d i n Ge r m a n y
ACADEMIA OFFERING
e d ata
is o n
ly p
Model Car
er m
itte
dw
ith
wr
itte
na
pp
ro
val
by
LE
CH
UZ
A,
wr
ite
to p
r@
lech
uza
.com
| 06.
13 /J T | P
r i n t e d i n Ge r m a n y
Includes the Science Kit Basic for experiments together with the class. Includes the Model Car Complete for experiments together with the class.
CLASSROOM SETS 7
NEW
modular
training
HYBRID RENEWABLE ENERGY
HIGHER EDUCATION
system
TRAINER
Experiment Set for Energy Production,
Energy Storage and Energy Supply
Software
» Visualization of operating parameters in tables and graphs
» Generation of characteristic curves and data export
Product Overview
Sample Experiments
Hybrid Renewable Energy Trainer
» Explore properties, efficiency and characteristic curves
» 1x Wind generator » USB data monitor
of the Solar Module, Wind Generator and Fuel Cell
» 2 x Solar module » PC software
» How to optimally align renewable energy sources: Which » 1 x Electrolyzer » Anemometer
» 1x Fuel Cell stack 30W » Radiation meter
energy source generates the most hydrogen?
» Instruction Manual and Experiment Guide +
» Chemical reaction of water during electrolysis: USB
How to generate hydrogen with renewable energy sources Art. no. 2000-2055
Optional components:
» Applying Faraday’s first law to fuel cells Isolated measurement module
Monophase switching module; Data acquisition module; ON-
GRID Inverter module
Accessories Module stand (NOT MOBILE)
LCD Monitor; Monitor Holder
8
In redesign
HIGHER EDUCATION
HyDrive – Electric Vehicle Trainer
Experiment Set for Teaching Hydrogen Fuel
Cell Technology in Electric Vehicles *
FUEL CELL HYDROGEN
ELECTRIC VEHICLE FILLING STATION
Software
The educational software facilitates system control, and monitoring,
data acquisition and graphical representation of the collected data. The soft- System overview
ware visualizes vehicle component interaction, the conversion of one energy
type to another, flow direction and state. It displays whether the vehicle is
consuming or recuperating energy and allows users to configure a variety of
drive cycles and load profiles, e.g. inner city stop & go, highway, uphill or
downhill etc..
Includes
Teaching ACADEMIA OFFERING
Materials HyDrive
E ✖✙✕✔ri✕ ✙h ✛✕✖✙ ✁r✏✛ner
✍✌☞✂ w✄r☎✄ n✡ ✆✄ nuals
Experiments
S50-0022-XX
» Basic equation of motion (die somit zum Pluspol wird). Wasserstoffionen strömen durch die Polymer-
Elektrolyt-Membran zur Kathode, um die Ladungen auszugleichen. Eine
Brennstoffzelle kann daher ebenso wie eine Speicherzelle (Batterie) einen
Strom liefern. Anders als eine Batterie muss eine Brennstoffzelle jedoch
nicht aufgeladen werden, und ihre Elektroden werden nicht verändert.
» Model Car » Test Bench
Folgende Reaktionen finden in der Zelle statt:
2H2O → 4H+ + 4e− + O2
Auf der anderen Seite der Membran (Kathode) findet eine andere,
» Take-Apart Fuel Cell Stack » Fan
» Conversion of electrical to mechanical power
Reduktion genannte chemische Reaktion statt:
4H+ + 4e− → 2H2
55 HyDrive - Experimentieranleitung
*
Notebook not included
Key Features
» Optimized instruction material for teachers and students
» 50 W PEM fuel cell with modular system design and upgrade options
» Extensive measuring technology and data acquisition via PC interface
SOFTWARE
» Convenient experimentation software and measurement data acquisition
» Integrated safety monitoring also for inexperienced users
Software
» Visualization of the physical system
» Real-time monitoring and plotting of system parameters:
e.g. hydrogen flow, fuel cell stack temperature, current and voltage
» Automatic experimentation mode for instant graph plotting and evaluation
» Manual experimentation mode for data generation and in-depth analysis
of load profiles and various influencing factors
Product Overview
Fueel Cell Trrainer
A tten ti
ACADEMIA OFFERING
e d ata
Experiments:
is o n
ly p
by
LE
CH
Prerequisite Make sure you have read and understood the instruction manual
in its entirety.
Carry out the 3 experiments one after the other.
Dependence of output on temperature and air supply » Traffic light module » Software + CD
»
Learning objectives Investigating the effects of reduced air supply on the V-I curve
Applying Faradays laws
Investigating the effects of increased internal resistance on the V-I
curve
Developing an equivalent circuit diagram
Investigating the effects of the fuel cell temperature on the V-I
curve
Exploring possible optimization, based on prior observations
» Hydrogen supply
Fuel Cell Module FC50
Fuel Ce ll
Electronic Load Module EL100
El ect roni c Lo ad
DC/DC Converter Module VC100
Vo lt ag e Co n ve rt e r (optional)
Pressure reducer for filling the hydrogen storage canister in the H² storage module Art. no. 631
Traffic Light Module TL10
T raf f ic L ig h t (optional)
of a fuel cell
Arrange the modules as in the following figure:
» Sample application for fuel cell car: Figure 2-1 Arrangement of modules
HIGHER EDUCATION
Nexa® Integration System
From Theory to Practical Application
Includes
Software
» Software package for the overall system control Art. no. 1870
* Only available in combination with a hydrogen connection kit from Heliocentris.
HIGHER EDUCATION
Hybrid Energy Lab-System
1.2 kW Fuel Cell and Battery Hybrid System for
Laboratory Application Includes
Instructional
Materials
A Fuel Cell – Battery Hybrid System that enables users to understand & research
individual components and system behavior under various hybrid set-ups. Designed
as a lab to support engineering courses focussed on the application of fuel cells,
battery technology, hybrid systems, energy management and energy storage.
Ideal for Courses Focused On: ck
a
St
» Battery Technology (Modeling)
Fu e l C e ll
» Battery Systems & Control
» Applied Fuel Cell Technology
135 cm
» Battery- Fuel Cell Hybrids
» Electrochemical Energy Storage & Conversion
» Renewable Energy Storage ter
nis
Ca
» Electrical & Hybrid Vehicles (HEV/FCEV)
e
id
M e ta l H y d r
» Backup Power Systems
The system provides an experimental platform for advanced training to applied research:
» Fuel Cell – Battery Hybrids
» Battery Charging/Discharging
» Battery & Fuel Cell Model Analysis & Comparison
» Calculation & Evaluation of Electrical Characteristics SOFTWARE
» Energy Management
» User Developed Control Algorithms
» Validation of Models Against a Real System
» Hybrid Power System Set-ups: UPS, Autonomous Power Supply,
Back-up Power System, HEV/FCEV
Software
» System Overview
» Efficiency Analysis
» Time Curve Fuel Cell & H2 System Battery charging discharging behavior
» Freely configurable measurements
» Visualization of characteristic curves
Hybrid Energy Lab-System
» Selection of manual and automated ademia Offering Experiments
ACADEMIA OFFERING
experiments
ACADEMIA OFFERING
» Generation of characteristic curves Question 1 How high could the system with 1 and then 2 metal hydride canisters
be loaded?
Load duration with one metal hydride canister (8 bar): 7.5 minutes
Load duration with two metal hydride canisters (8 bar): 22 minutes
Question 2 Interpret the recorded characteristic curves. What stands out?
After approx. 2 minutes the stack power oscillates to a constant value.
The hydrogen volume flow (H2 Flow) is identical in both experiments.
The curves of the pressure on the pressure gauge of the hydrogen
Dimensions (W x H x D): 600 x 1,350 x 600 mm, weight: approx. 150 kg.
*
Only available in combination with a hydrogen connection kit from Heliocentris.
Key Features
» Mobile Laboratory For Solar Hydrogen Generation
» Electrolyzer and PV system can be used separately
» LabVIEW based Software for system control, system monitoring
and data acquisition
» Extensive instruction material and Experiment Guide
SOFTWARE
» User-friendly, easy-to-operate
» Remote monitoring via LAN network is possible
» Can be combined with other systems like Fuel Cell Trainer
and Hybrid Energy Lab-System
Software
» System overview and control of components
» Overall system efficiency analysis
» Freely configurable measurements
» Overall system output balancing
System Overview Measurements
» System efficiency chain (Sankey diagram) and flow chart
» Voltage and current display for individual components
ollar H
Hyd
drogen EExte
ten- y
on: Use a nd replica tion of the imag
»
dw
ith
wr
itte
na
pp
ro
val
by
LE
»
How to determine measurement values of the How to test day and night profiles
photovoltaic system with changes of the position
Solar Hydrogen Extension - Experiment Guide 7 Solar Hydrogen Extension - Experiment Guide 25
LABORATORY SOLUTIONS
ar- ptio
Tra nal
cke
210 cm
The New Energy Lab enables the exploration of various energy
sources in combination with the battery system or electronic
load. The Monitoring and Control Software enable your students to
optimally evaluate system data.
Key Features
» Laboratory for solar, wind, hydrogen and fuel cell technology
» Set-up of hybrid system with solar, wind, hydrogen and
fuel cell technology, as well as batteries
» High reliability and safety
» Comprehensive system software
m
60 c
Software
SOFTWARE
» System overview, control and explanation of components
» Efficiency analysis of the overall system and the individual components
» Freely configurable measurements
» Output balancing of the overall system and the individual components
» System efficiency chain and flow chart
» Voltage and current display for individual components
» Monitoring of the hydrogen circuit
» Creating and saving load profiles
System includes
» Solar system: 1,500 Wp Measurements System Overview
» Small wind power module: 300 Wp
» Fuel cell module: 1,200 W
» Battery bank: 55 Ah
» Electrolyzer: 72 Nl/h optional on request 198nl/h
» Low-pressure metal hydride canisters: approx. 750 Nl
Learning Objectives
» Electronic load: 2,400 W
» Central energy management unit » Introduction to solar, wind, hydrogen
» System controller with monitoring and control software and fuel cell technology
Measuring technology, such as anemometer, H² flow
» » Design of hybrid systems Neew Energyy Lab
A tten ti
meter
ACADEMIA OFFERING
e d ata
»
ly p
by
LE
CH
UZ
A,
wr
ite
to p
of hybrid systems
r@
lech
uza
.com
| 06
.13 /J T | P
Accessories
r i n t e d i n Ge r m a n y
» Solar Tracking System alternative to the mobile version » Autonomous operation of real loads
2 Solar Energy 2.2 Experiment 2:
Measure values of the photovoltaic system - large position changes
Measurement Instructions 6. On the main switch cabinet press the button C o nt rol Vo lt ag e O N
Measure no-load voltage, short circuit current, current
and voltage under load for the following alignments 7. Set the switches at the configuration and electrical rack, modules
and tilt angles En ergy Manag emen t and Confi gurati on as follows:
Tilt angle 45° 45° 45° 30° 30° 30° 15° 15° 15° Switch 230 VAC OUT 0 –
Angle of Switch 24 VDC OUT 0 –
0° -60° 60° 0° -60° 60° 0° -60° 60°
alignment Switch 12 VDC OUT 0 –
Switch F ue l Ce l l OCV LED OCV lights up
Switch Wind power generator SC LED SC lights up
How to measure no-load voltage Switch G RI D Off LED OFF lights up
1. Run the solar panel in no-load: On the CON FIG URAT ION Table 2-3 Settings for solar panel experiments
module, set the SOLAR switch to the position O C V . 8. Set the buttons at the N E L F ront end 1 as follows:
2. Disconnect the component test battery from the solar panel by
Frontend 1 button Setting Indicator
setting the C T switch to the position O FF .
N EL F ront end 1 > F ue l Ce l l > Off –
3. In the New Energy Lab F ront end 1 , read the following values and Power
enter them in the worksheet 2:
N EL F ront end 1 > F ue l Ce l l > – –
Start / Stop
N EL F ront end 1 > Hyd rog en Off –
U mod. #1 U mod. #2 Solar rad.
g en er ato r
I mod. #1 I mod. #2 Table 2-4 Software settings for solar panel experiments
9. Optional: If you wish to do further data analysis, you can log
How to measure short circuit current specific values to a file. The logged data is essential for further
data analysis; it is not part of this experiment.
In the New Energy Lab software, in the Dat a Logg ing
area, click on Op tio ns .
24 New Energy Lab - Experiment Guide New Energy Lab - Experiment Guide 23
Investigate the entire energy conversion chain – energy harvesting, conversion and storage in the form of hydrogen and consumption by a load.
We provide extensive consultation for equipping your laboratory.
Combine the Solar Hydrogen Trainer with the Fuel Cell Trainer or Hybrid Energy Lab-System to build your own autarkic Power-to-Gas Lab.
+
+ Hybrid Energy Lab-System
Hydrogen Supply
For Fuel Cell Modules and Training Systems
HG Series Hydrogen
Generators Metal Hydride Storage
The HG series hydrogen generators enable the
production of the purest hydrogen (99.9999 %)
Canisters
and are suitable for direct operation of fuel cell Metal hydride storage canisters operate at low H² Connection Kit
systems and for filling metal hydride storage pressures from 10 to 17 bar and enable the safe
canisters. storage of larger quantities of hydrogen.
Pressure reducer for direct operation of
The maintenance-free generators are available with
fuel cell mod-ules or re-filling metal
a production capacity of 30 or 60 Nl/h and are With various canister capacities (200, 400 and
hydride storage canisters from 200 bar
designed for continuous operation. The Input/Out- 800 Nl) and the possibility of connecting multiple
compressed gas cylinders. Item No. 631
put board enables control via PC and an expansion canisters, the capacity can be increased. The quick
of the product capacity by means of cascading up coupling connector of the canister assures simple
to 10 generators. and safe coupling and uncoupling.
Hydrogen Detector
Product Options Product Options
The portable hydrogen warning device (0 – 100 ppm)
HG30 Art. no. 1306 MHS200 Art. no. 648
for monitoring of the workplace in combination with
HG72 - HG198 Art. no. 1302-03
a leak detection liquid assure safety when working
Optional remote control software Art. no 1307 MHS800 Art. no. 650 with hydrogen. Item No. 731
PRODUCT OVERVIEW
SCHOOL LEVEL
Model Car Page 04
352 Model Car Demo*
354 Model Car Complete*
926 Model Car Complete Bundle of 6 units
Accessories
314 Lamp for operating the solar cell
345 Hand generator for manual production of hydrogen
358 Load measurement box
Professional Page 06
391 Professional Demo
392 Professional Complete
915 Professional Demo Bundle
927 Professional Complete Bundle
Accessories
314 Lamp for operating the solar cell
PRODUCT OVERVIEW 16
ETR Productcatalogue_EN_1604
International GmbH
Heliocentris Academia GmbH
Rudower Chaussee 30, 12489 Berlin, Germany
Tel. + 49 (0) 30 340 601 600
www.heliocentrisacademia.com