Professional Documents
Culture Documents
Bleeding of The ABS Hydraulic System
Bleeding of The ABS Hydraulic System
Bleeding of The ABS Hydraulic System
Bleeding of the ABS hydraulic system
If brake controls feel "spongy" due to the presence of air bubbles in the system, bleed as usual, as described in Section (Changing the front
brake system fluid) and (Changing the rear brake system fluid).
Before bleeding a brake master cylinder, move back the calliper pistons to let any air buildup in the ABS control unit flow into the master
cylinder.
Purge must be carried out by means of the corresponding unions (A) placed on the callipers and the brake master cylinders.
Important
Do not undo the special screws securing the pipe unions on the ABS hydraulic control unit, unless control unit replacement is necessary.
Important
If the ABS hydraulic control unit has been replaced, it will be supplied with the secondary circuit already filled with fluid. Control unit must thus
be assembled and the system filled and drained as a traditional system.
https://wsm.ducati.com/docuviewer/main/wsm?familyCode=SBK&year=2018&modelVersionYear=SBK%20Panigale%20V4%20S%20%28E4%29%20%2814… 1/2
7/25/2018 DUCATI Document Viewer
https://wsm.ducati.com/docuviewer/main/wsm?familyCode=SBK&year=2018&modelVersionYear=SBK%20Panigale%20V4%20S%20%28E4%29%20%2814… 2/2