iA -
bef CTC SEL Cd fo
By Shvetsova OlgaAdvice.
1. | use the HiMALAYA Dolphin baby Yarn for making the
stuffed toys. You can find this yarn on Etsy marketplace?
Plush or velvet yarn of any other brand will also be perfect,
but then choose an appropriate size of a crochet hook.
2. Be sure your stitches are tight enough without any huge
gaps. If the gaps are there in a crochet fabric, just try a
smaller size of a hook.
5. No lift loops needed in each round, just continue to
crochet in a spiral method.
4. Do not forget to replace a stitch marker into the first
loop of every other row, Use a plastic stitch marker, pin or
piece of thread in a contrast color.
5. Every detail crocheted in a spiral method has to be
finished with a slip stitch.
6. You have to fill up the crocheted Toy as tightly as
possible to shape it better. Use the hollowfiber or any
appropriate filler.
7. If you have difficulties with making a magic ring for
Amigurumi, it is possible to go another way. Just chain two
and then single crochet in the second loop so many
stitches you need (look through the picture 1),Conditions of the pattern use:
- This crochet pattern is for personal use only.
- Toys made in accordance with this pattern can be sold
without limitations.
- Purchase of the pattern does not give the right to publish
it open access on the Internet or resell it to third parties.
You will need:
1. Plush yarn Himalaya Dolphin Baby or analogues (100%
polyester, 100g/120 mt or 3,53 02z/131 yrds):
- brown - | skein
- pink (or any other color for pants) - 0.5 skein
. 4mm hook / US size F;
. Plastic safety eyes 11 mm
. Hollowfibre filling or padding polyester for stuffing
. Plastic velvet spout
. Scissors
. Large eye sewing needle
. Thin cotton thread of black color
for eyebrows.
10. 2 cm plastic joints for toys
Oonoarun
Abbreviations:
MR - magic ring
sc - single crochet
sl st - slip stitch
inc — increase (2 sc in the same stitch of the previous round)
dec — decreaseLegs:
Getting crocheted brown yarn.
1 round: ch 6, starting in the second chain stitch from the hook: inép,
sc, 4 sc in the last stitch of the chain; along the other side of the chain:
3 sc, inc = 14 sc ie
2 round: | sc, ine, 3 sc, inc, 2.sc, inc, S-sc, inc, 1 sc = 18 sc
3 round: inc, 7 sc, 2 inc, 7 sc, inc = 22 sc
4 round: 22 sc
5 round: 6 sc, dec, 6 sc, dec, 6 sc = 20 sc
6 round: 6 sc, 2 dec, sc, 2 dec, 5 sc = 16 sc
7 round: 5 sc, 3 dec, 5sc = 13 sc
8 - 12 rounds: 15 sc (5 rounds) ‘ yy
Change color on 10 round. F
Plastic joints fasten in 11-12 round.
‘Stuff the Legs.
13 round: dec” 6 times
Tighten the final gap with the help of the needle, inserting it
under the front loop of every stitch. Fix and hide the yarn tail.
Arms:
1 round: 7 sc into MR
2 round: inc * 7 times = 14 sc
S - 4 rounds: 14 sc
5 round: 2 dec, 10 sc= 12 sc
6 round: dec, 10 sc = 11 se
7 - 12 rounds: 11 sc (6 rounds)
13 round: dec * 5 times
Tighten the final gap with the help of the needle
inserting it under the front loop of every stitch. Fix
and hide the yarn tail.Head: 4
1 round: 7 sc into MR
2 round: inc * 7 times = 14 sc
3 round: (1 sc + ine) * 7 times = 21 se
4 round: (2 sc + inc) * 7 times = 28.sc
5 round: (3 sc + inc) * 7 times = 35 sc
6 round: (4 sc+ inc) * 7 times = 42 sc
7-11 rounds: 42 sc (5 rounds) At
12 round: (5 sc. dec) * 6 times = 36sec
13 round: (4 sc, dec) * 6 times = 30 sc
14 round: 1 Isc, dec, Isc, 4 so dec, 1 1sc = 27 sc
Put the marker in the place cond
decrease (highlighted in blue).
15 -16 rounds: 27 sc (2 rounds)
17 pag: 7 sc, dec, 35 sc, dec, 5 se; dec, 8 sc = = 24 sc
Insert the safety eyes in 15th round of the detail.
Stuff the head. -
18 pag: (2 sc, dec) * 6 times = 18 sc
19 p 1 sc, dec) " 6 times = 12 sc
20 pag: dec* 6 times = 6 sc
Tighten the final gap with the help of the
needle, inserting it under the front loop of
every stitch. Fix and hide the yarn tail.
Decorate the face:
1. Needle-sculpting:
Mark 3 points on the toy’s face:
points 1 and 2 - to sculpt the eyes. Points 1
2 are located at the places of the eyes’ fasten
point 3 — to sculpt the mouth. Point 3 is located
between 17th and 18th rounds of the head (please
refer to the photo).To needle-sculpt the face, usé the tapestry needle and the
Same yarn you used for crocheting the head, coe
folded.
1.1 Insert the needle into point s and) withdraw it of point 2
on the right side of the eye.
Tae rt ne the needle into point 2 on the left a of the
draw it out of eGie oc! the thread and tie a
eye and
Kknot.
1.35 Next, insert the needle into point 3 and withdraw it out of
point | on the right side of the eye.
1.4 Insert the needle a point | on the left side of the eye
int 3, tighten the thread and tie a knot.
ie
and withdraw it out of1.5 Insert the needle into point’S. and withdraw it out of point 2
on the left side of the eye. .
1.61 -
ay
points 1 and 2 and withdraw it out of point 3.
1.8 Pull the. thread to get the “cheeks” tie a knot, and hide the
thread tails. ‘ 4 at >
1 round: 5 sc into MR J Eke
2round: then ch 1,turn,5s¢
x Ae
i | oeEars:
1 round: 6 sc into MR
2 round: inc * 6 times = 12 sc
3 round: (1 sc + inc) * 6 times = 18 sc
4-5 round: 18 sc
Flatten the detail and make 9 sc > through
the both layers to close.
Sew the mouth to the! face along the mouth’s perimeter,
but leave the lip unsewn.
Embroider the eyebrows with the help of black cotton
thread.
Cut (remove) the plastic nose’s leg and glue the nose to
the toy’s face (I use Moment Crystal glue).
Sew ears.
(please refer to the see photo).Getting crocheted yellow yarn. Body:
1 round: 6 sc into MR
nc * 6 times = 12 sc
1 sc + inc) * 6 times = 18 sc
4 round: (2 sc + inc) * 6 times = 24 sc
5 round: (3 sc + inc) * 6 times = 30 sc
6 round: (4 SC, - inc) * 6 times = 56 sc
7 round: 5 Se inc, 5 sc, inc 5 sc, i. 18 sc
= 59 sc “4
8-10 rounds: 39 sc (3 epee a
‘Change color.
11-12 rounds: 39 sc (2 rou’
15 round: 8 sc, dec, 2 sc, dec, , dec, 21 sc= 56 sc
Put the marker in the place of the second decrease (highlighted in blue).
14 round: (4 sc, dec) * 6 times= 30 sc
15-16 rounds: 30 sc (2 rounds)”
17 round: (3 sc, dec) * 6 times = 24 sc
18 round: (2 sc, dec) * 6 times = 18 sc
19 - 20 rounds: 18 sc
.
Tail:
1 round: 6 sc into MR
2 round: inc * 6 times = 12 sc
5 round: 12 sc
4 round: (1 sc, dec) * 4 times = 8 sc
Assembly:
Attach the legs to the body at the level of 6th round of the body.
Stuff the body. Pin the head to the body (find the best place for
the head to look most harmoniously). Sew the head to the body... | Dungaree.
id enter hook * ‘across’ | id crochet 38
F fer r to the: foto): es 1
ape ‘
Gitien ch T,tufa tngatork, @ sc)” repeat
Crochet a 20 chain the upper corne
from the rear (please | fer to the foto).
Ha kySew the tail to the body 2b thé level of 7th-8th rounds.
Attach the arms to the ° Daa with the help of yarn. (To
do this, | use the plush yarn double folded +
extrastrong sewing thread.)
—You can decorate with wood tag "HandMade'.
a
Thank you very much for purchasing t
Mammi Toys.
pattern by
I hope you will enjoy the process of
the result of your work will give you
ing the toy, and
more delight.
‘.
Good tick! ea.