The document summarizes the design and specifications for a complete mould. It will be designed using 3D software and include a mould base made of C45/MS/P20 steel. The core, cavity, and sliders will be made of Stavax/Eskylose/H13 steel hardened to 52 HRC. Pillars and bushes will be made of 20MnCr steel case hardened to 60 HRC. The mould will be aligned using tapered and straight interlocks along with pillar/bush spigots and aligning buttons. An ejector system with a ball cage, oil-free bushes, and retractable coupling/springs will also be included. Top and bottom plates
The document summarizes the design and specifications for a complete mould. It will be designed using 3D software and include a mould base made of C45/MS/P20 steel. The core, cavity, and sliders will be made of Stavax/Eskylose/H13 steel hardened to 52 HRC. Pillars and bushes will be made of 20MnCr steel case hardened to 60 HRC. The mould will be aligned using tapered and straight interlocks along with pillar/bush spigots and aligning buttons. An ejector system with a ball cage, oil-free bushes, and retractable coupling/springs will also be included. Top and bottom plates
The document summarizes the design and specifications for a complete mould. It will be designed using 3D software and include a mould base made of C45/MS/P20 steel. The core, cavity, and sliders will be made of Stavax/Eskylose/H13 steel hardened to 52 HRC. Pillars and bushes will be made of 20MnCr steel case hardened to 60 HRC. The mould will be aligned using tapered and straight interlocks along with pillar/bush spigots and aligning buttons. An ejector system with a ball cage, oil-free bushes, and retractable coupling/springs will also be included. Top and bottom plates
The document summarizes the design and specifications for a complete mould. It will be designed using 3D software and include a mould base made of C45/MS/P20 steel. The core, cavity, and sliders will be made of Stavax/Eskylose/H13 steel hardened to 52 HRC. Pillars and bushes will be made of 20MnCr steel case hardened to 60 HRC. The mould will be aligned using tapered and straight interlocks along with pillar/bush spigots and aligning buttons. An ejector system with a ball cage, oil-free bushes, and retractable coupling/springs will also be included. Top and bottom plates
Design- The complete mould will be designed using 3D software.
2 Malt- Specs. Mould Base - C45/ MS/ P20 Core / cavity/ Sliders- Stavax/ Eskylose/ H13--Hardened to 52 HRC Other Mould elements-- EN 31-- Hardened to 48HRC Pillar/ Bushes-- 20MnCr-- Case hardened to-- 60 HRC 3. Aligning elements--Taper/ straight inter locks & the complete mould is aligned by pillar / bush spigots & aligning buttons. 4. Ejector system--- With Ball cage/ Oil free bushes& with retractable coupling / springs 5. Insulation--- Top & bottom plates will be provided with Epoxy sheet