Professional Documents
Culture Documents
ANEES PWWW CMPLTE1
ANEES PWWW CMPLTE1
ON
Diploma
In
Submitted by
MOHAMMAD ANEES
II SHIFT POLYTECHNIC
(Affiliated to SBTET, Vijayawada, Approved by AICTE)
CERTIFICATE
This is to certify that the industrial training work on “SMILE ELECTRONICS LTD” is a
bonafide work done by Mr. MOHAMMAD ANEES bearing Register Number 20441-EC-
023 in partial fulfillment of the requirement for the award of the degree of “Diploma” in
“Electronics and Communication Engineering” during 2022-2023.
EXTERNALEXAMINER
Place :
Date :
Dr. K.V. SUBBA REDDY INSTITUTE OF TECHNOLOGY
II SHIFT POLYTECHNIC
(Affiliated to SBTET, Vijayawada, Approved by AICTE)
MOHAMMAD ANEES
Reg.No. 20441-EC-023
CERTIFICATE
traning report
NAME OF THE STUDENT : MOHAMMAD ANEES
PIN NO. : 20441-EC-023
NAME OF THE BRANCH : DECE
NAME OF THE INSTUTION : SMILE ELECTRONICS
NAME & ADDRESS OF THE INDUSTRY : SMILE ELECTRONICS LTD, BNGLR
UNDERTAKING
RELIEVING LETTER
TO,
The Principal,
DR. KV SUBBA REDDY INSTITUTE OF TECHNOLOGY,
Respected sir,
COMPANY PROFILE
We are pleased to introduce ourselves as one of the major Electronic Manufacturing
Services provider located in Bangalore, the Silicon Valley of India.
SMILE Electronics Ltd, is situated at Bhattarahalli on Old Madras Road, Bangalore with its
corporate office at #32, Sheshadri Road, Bangalore 560009. The facility is upgraded with
the latest state-of-the-art automatic SMT Lines, which serve various global companies on
local as well as international demands.
Smile is certified for various ISO Certificates, and is equipped with 7 fully automated
assembly lines. We provide comprehensive and cost-effective electronic manufacturing
solutions for technically demanding HIGH MIX - HIGH TECH solutions, encompassing
the entire product life cycle (PLC) from the inception stages until market realization.
At A Glance
Spread across 2 acres of land with over 50,000 sq. ft. of built-up area
Smile group consists of more than 450 employees
7 production lines
Complete lines with automated pick & place Machines (2, 00, 000 CPH), Automatic Screen
Printing Machines,9-11 zone reflow machines, RoHS & non RoHS wave soldering,
automated conveyors for manual mounting & manual soldering
2.5D x-ray machines, in-line AOIs, table top AOIs, functional testers, in-circuit testers &
flying probe testers
Inspection System, BGA Rework Stations and Automated Optical Inspection Systems
RoHS Capability
SMILE has RoHS compliance lines. RoHS, an abbreviation for Restriction of Hazardous
Substances, is an effort to provide a healthier work environment and safer end products by
eliminating six specific hazardous substances from production environments and practices.
These six substances are
Cadmium
Hexavalent Chromium
Lead
Mercury
Polybrominated Biphenyls
Polybrominated Diphenyl Ethers
SMILE practices only the highest in printed circuit board assembly standards.
PREFACE
This Training report has been prepared in partial fulfillment of the
requirement for the Degree of Diploma in ELECTRONICS AND COMMUNICATION
ENGINEERING in the academic year 2020-2023.
For preparing the training report, we have visited the SMILE ELECTRONICS LTD,
BANGLORE. During the suggested duration for the period of 6 months to avail the
Necessary information. The blend of learning and knowledge acquired during our practical
studies at the SMILE ELECTRONICS LTD, BANGLORE is presented in the training
report.
The 6 months training has exposed us to the actual application of the various that we
studied.
The training report starts with the basic concepts of LED Lights, Hardware like PCBS and
soldering the components.
This report is written on the basis of practical knowledge acquired by us during the period
of practical training taken at SMILE ELECTRONICS LTD, BANGLORE. And some other
information is obtained from the industrial manuals, reports and study websites.
ACKNOWLEDGEMENT
We render our deep sense of appreciation for the guidance render by MR.MUKESH
GUPTA for giving us support to accomplish our training in SMILE ELECTRONICS
LTD, BANGLORE.
We offer our sincere thanks to MR. K. KISHORE KUMAR, HOD of Electronics &
Communication Engineering for permitting us to undergo industrial training.
We also thanks to MRS. SHAMSHAD BANU, our supportive incharge from our college
with her concern, help and guidance.
We express our hearty thanks to all those who contributed for successful completion of
industrial training.
Last but not the least we would like to thank our parents, industrial staff and all the helping
hands for their precious guidance which were valuable for our study both theoretically and
practically.