Professional Documents
Culture Documents
VSC40 Firmware Upgrade
VSC40 Firmware Upgrade
1, if the Program and instructions were sent via Email extract the contents and copy to a
CD. You should have the following 1] Bootloader.exe 2] VSC40 Firmware Upgrade
Instructions
2, Double click on the “Bootloader.exe” on the desktop and the window below will
open
4, From the V4Plus menu, “use Open HEX file” to select/browse for the updated HEX
file on the desk if sent or use the existing one located within C:/VSC.
5] Browse to the following location C:/VSC and locate “VSC40.hex” and select.
8] Click “OK” and then switch the VSC40 ON making sure the USB cable from the PC
is connected to the VSC40
9] Once the firmware starts to program a progress bar should be visible as shown
below. At this point it’s also possible the program may stop responding, if this is the
case just allow it to recovery.
10] Once completed the following message will appear, select OK
THE FIRMWARE WILL NOW BE UPGRADED AND THE VSC40 IS READY TO USE.