LEELAM
INDUSTRIES
i
FLUID COUPLINGS INHERENT ADVANTAGES fF
“No wear of power transmitting elements. Motor
always starts unloaded. So, it accelerates quickly 10
its optimum speed at which it delivers its peak
torque.
+The torque multiplication at start-up, Enables a
motor fo be selected for running power of a
machine, instead of its starfing power required,
Thus, acceleration of high inertia load is possible by
a comparatively low powered motor.
The rate of acceleration can also be controlled by
varying the oil filling quantity. The shock free,
‘Smooth load take up is of great importance in some
pplication.
Saves Energy...
* Maximum torque capacity of a coupling con be
‘adjusted and limited predetermined value to suit the
motor or the machine, by adjusting the oil filing
quantities.
+ Simple, robust and more reliable, squirrel cage
motor with simple star-delto starters combined with
fluid couplings, can be employed for application
which otherwise, require costly, special motors with
even more complicated starting gears.
Start Machines
Smoothly.
+The coupling, effectively dampens the shock and
torque fluctuations. Also protects motor from sudden
jamming of machines. A fusible plug allows the oil to
escape out and isolates the motor in case of
prolonged delay in clearing the obstruction.
Automatic load sharing ond synchronization is
achieved in case of multi ~ motor drives.
+ Braking of a running machine can be effected by
reversing the rotation of motor. The opposite torque
developed by the reverse rotation of motor stops the.
machine.
Lower Demand
On Powerlines...BL 8 |b |aemin| 81 | & [Dmin.[D mix [amin . ah
5
zor [ne [as | 26 [7a f= | woo | = | as xy
245 | 17 ge [ tee 112 | 90 | 180 | 42
277_| 203 48_|i91 | 125 | 90 | 120 | «2
322 | 225
S88
60 | 224 [138 | 110 | 220 | 35
37a_| 255 | 70 | 65 | 263 | 160 | 125 | 250 | 60 |
ia | 202 | 20 | 70 | aie | 176 | 140 | 250 | 5
473 | 310 | 90 | 80 | 355 | 194 | 180 | 280 | 75
470 | 240 | 110 | 90 | 390 | 240 | 200 | 320 | 60 |
560 | 400 | 130 | 100 | 460 | 280 | 250 | 400 | 90
oo | ao [iso pe f= |= |= | ~ | 10
710 | 480 | 160 | 120 110
00 | a0 | 20 [iso f= |= | = | = | 20
a aed aoe min a MOA nae
Principal :
*LEELAM' fluid couplings (models C*) are basically, constant
speed, constant filing, hydrodynamic fluid couplings. The
basic power transmission is through a stream of fluid-most
Sore ened et eckedig Uatirws ar ramalepeel eroaceE, rr ieaeet a eGanei=ASGaRUSAES bo oer
‘The kinetic enargy of oil leaving impellers token-up by runner _oprations, the input ond output torque of a coupling are
and the oil is returned beck to impeller. In operation, impeller eave! but the speeds cre reduced by 3% 10 5%
is driven by tho prime-mover-generally electric motor, and the Leelam : fluid couplings (model C**) are
runner vee he mei Seuane He RTT
Been sic units; the coupling shalt is pre-bore
an ecole nial rk ehidcoulgiedarediemeler a oe acne, a 7s . #
sorts rotating with motor, but the coupling hes no torque :
copaciy at the runner to drive the machine. As the motor tapped holes art provided on the casing to fit
caesluested ond contriues torun ete speed, near to ts rated suitable coupling or V-belt pulley ot customer
speed, the torque builds up gradually. During this start-up, the works.
difference of speeds, beiween impeller and runner-the slip is (8) As ‘Ready-to-fi-units: the coupling shaft is
maximum. Because of this sli, the output - torque is greoter pre-boord to suit standard motor shaft and
than the input torque, due to the multiplied kinetic energy (1) A suitable flexible coupling, pre-bored to
imparted to the oil, by impeller. This increased output torque gulf naichine theft fified on fhe cocina:
enables the motor to star and accelerate, machines of higher
(2) A suitable V-belt pulley fitted on the casing
to drive the machine through V-belts.
{3) An edditional break drum also be fitted to
intent
‘Once the machine oceslerated and is running at constant
speed, the input and output torques are equal. But fo transmit
this torque, there is an inherent slip of about 3% 10 5% the casing to accommodate mechanical breaks.
between input and output speeds. (C) Special drive arrangements or drive units con
Typical application : also be supplied for specific application
Agitators, ball mills, bulldozers, centrifuges, decanters, convertor, centrifugal crushers, cable drum transmission,
cranes, concrete mixer, construction machinery, cement plant, compressor, drilling rigs, dredgers elevator, excavators,
fans, forklift, kneaders, locomotives, mixer, mining machineries, pulverizes, paper machineries , pug mills, rotary kilns,
steel plant conveyer & cars, soap plodder, sugar mill machinery, textile machineries, tractors, vibrating screen, wire
drawing, stranding & cabling machines, wagon tipplers.
Tomeane
oo move
eas ea [toa Joos [os [eae [or [eon oes] can] e-iofee| en
we | = [ea [1s [28 [50 [too [200 [350 [200 | 750 /200z000|3000
aa [12 [29 [30] 75 [185 [255 [500 |750 [1200 |2000|7000|son0| 300)
[mes [zo [foo soso foo feast =| ~t=[=[=]=
‘Manufactured By : LEEAM INDUSTRIES
Plot No. : 348, Road No. 7, Kathwada G..D.C., Kethwado,
‘Ahmedabad - 382 430, Gujarat, INDIA.
Phone : +91 79 2909 3110 / (0) +91 792297 0065,
INDUSTRIES rei cm nctereitine com /Ielom@indonaciumpump.con
Web : wivwindianvacuumpump.com