Professional Documents
Culture Documents
Atlas Copco Marine Ketting Portfolio Rev01
Atlas Copco Marine Ketting Portfolio Rev01
1
Atlas Copco Ketting marine Center
Starting Air Compressors
Atlas Copco Ketting Marine Center offers you an unique skid mounted compressor
range for marine propulsion- and industrial applicsations, based on its well proven
L-piston high pressure design.
7 purposes.
9 7. High volume fan specially
4 designed for excellent cooling.
8. pressure switch
6
5 9. non return valve
5
10.flexible hose
2
STARTING AIR COMPRESSORS
TECHNICAL DATA
400V/3 phase/50Hz
3
POWER SUPPLY 400V/3/50Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common classifi-
cation bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN100L04/B35
kW : 3.0
R.p.m : 1500
Power supply : 400V/3 phase /50Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
4
Continuation technical
Continuation technical specification:
specification:
BUILD
BUILDON
ONPARTS:
PARTS:
Danfoss
Danfosspressure switch
pressure switch :KPS-39: KPS-39
Spidex flexible coupling
Spidex flexible coupling : A28-98Sh
:A28-98Sh
Danfoss
Danfossdrain valve
drain valve :EV224B: EV224B
Non
Nonreturn
return valve
valve :ACN : ACN
Safety
Safetyvalve
valve :32 bar: 32 bar
Moisturetrap
Moisture trap stainless
stainless steel
steel :6667 : 6667
Rubberhose
Rubber hose compressed
compressed air air
outlet
outlet :SAE100R1AT 3/4"300 3/4"300
: SAE100R1AT mm-T pipe connection
mm-T 22 mm
pipe connection 22 mm
Barry
Barry vibration isolators
vibration isolators :C-1035: C-1035
Pressuregauge
Pressure gauge :Lp/Hp: Lp/Hp
Baseframe
Base frame colour
colour :Ral 9005
: Ral(black,
9005acryl coating)
(black, acryl coating)
Manuals:
Manuals:
TheThe
LTLT 3-30compressor
3-30 compressor willwillstandard
standardbe be
delivered with one
delivered withinstruction manual and
one instruction one part
manual andlist
oneon CD-ROM in PDF
part list on CD-ROM
format. Also one test certificate will be delivered in hard copy format.
in PDF format. Also one test certificate will be delivered in hard copy format.
Weight and demensions:
Weight and demensions:
Dimensions ( L x W x H ) :820 x 530 x 624 mm
Dimensions
Weight (LxWxH) :94 kg: 820 x 530 x 624 mm
Weight : 94 kg
Common information:
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
This
Its starting air compressor
also plug and play, you only can
have easy be the
to install installed
pressurewithout any existing
hose to your specialpipe
tools or other
system resources.
and install the electrical
Itswiring
also plug and play, you
to your control panel. only have to install the pressure hose to your existing pipe system and install
the electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute
* Free inlet pressure
Air Delivery :1 bar1217 with reference conditions:
measured according ISO
Intake air and coolant temperature :20¡C
Absolute inlet pressure : 1 bar
Intake air and coolant temperature : 20°C
For all quotations and orders by us concerning the supply of goods and/or services, the general sales- an
metal- and electrotechnic industry, as recently put down by the branch society FME-CWM at the office of th
court in The Hague — Holland are applicable. A copy of these terms is attached or will be supplied free of
Differing sales- and supply terms are explicitly rejected.
5
6
POWER SUPPLY 400V/3/50Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common
classification bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN112M04/B35
kW : 4.0
R.p.m : 1500
Power supply : 400V/3 phase /50Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
7
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 5-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM
in PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute inlet pressure : 1 bar
Intake air and coolant temperature : 20°C
8
9
POWER SUPPLY 400V/3/50Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common classifi-
cation bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN132S04/B35
kW : 5,5
R.p.m : 1500
Power supply : 400V/3 phase /50Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
10
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 7-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM in
PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute inlet pressure : 1 bar
Intake air and coolant temperature : 20°C
11
12
POWER SUPPLY 400V/3/50Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common classifi-
cation bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN132M04/B35
kW : 7,5
R.p.m : 1500
Power supply : 400V/3 phase /50Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
13
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 10-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM
in PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute inlet pressure : 1 bar
Intake air and coolant temperature : 20°C
14
15
POWER SUPPLY 400V/3/50Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common classifi-
cation bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN160M04/B35
kW : 11
R.p.m : 1500
Power supply : 400V/3 phase /50Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
16
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 15-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM
in PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute inlet pressure : 1 bar
Intake air and coolant temperature : 20°C
17
18
POWER SUPPLY 400V/3/50Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common classifi-
cation bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN160L04/B35
kW : 15
R.p.m : 1500
Power supply : 400V/3 phase /50Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
19
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 20-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM
in PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
20
21
STARTING AIR COMPRESSORS
TECHNICAL DATA
400V/3 phase/60Hz
22
POWER SUPPLY 440V/3/60Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common classifi-
cation bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN100L04/B35
kW : 3.45
R.p.m : 1800
Power supply : 440V/3 phase /60Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
23
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 3-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM in
PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute inlet pressure :1 bar
Intake air and coolant temperature :20°C
24
25
POWER SUPPLY 440V/3/60Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common classifi-
cation bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN112M04/B35
kW : 4.6
R.p.m : 1800
Power supply : 440V/3 phase /60Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
26
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 5-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM in
PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute inlet pressure : 1 bar
Intake air and coolant temperature : 20°C
27
28
POWER SUPPLY 440V/3/60Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common
classification bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN132S04/B35
kW : 6,3
R.p.m : 1800
Power supply : 440V/3 phase /60Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
29
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 7-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM
in PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute inlet pressure : 1 bar
Intake air and coolant temperature : 20°C
30
31
POWER SUPPLY 440V/3/60Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3-PHASE E-MOTOR:
The starting air compressor is installed with a tropicalized e-motor which is suitable for high ambient
temperatures of approx. 50 °C. The e-motor is provided with pre-loaded bearings and is greased for lifetime.
The e-motor is including factory test certificate and build according to the regulations of most common classifi-
cation bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E-Motor : 5RN160M04/B35
kW : 12,50
R.p.m : 1800
Power supply : 440V/3 phase /60Hz
Enclosure : IP-55
Insulation class : F
E-motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
32
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 15-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM
in PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute inlet pressure : 1 bar
Intake air and coolant temperature : 20°C
33
34
POWER SUPPLY 440V/3/60Hz
Construction description:
Compressor block and electric motor are build together on a common base frame including:
Technical specification:
COMPRESSOR BLOCK:
3- PHASE E- MOTOR:
The starting air compressor is installed with a tropicalized e- motor which is suitable for high ambient
temperatures of approx. 50 °C. The e- motor is provided with pre- loaded bearings and is greased for lifetime.
The e- motor is including factory test certificate and build according to the regulations of most common classifi-
cation bodies: Lloyd Register of Shipping, Bureau Veritas, Germanischer Lloyd and Det Norske Veritas.
Make : Rotor
Type E- Motor : 5RN160L04/B35
kW : 17,30
R.p.m : 1800
Power supply : 440V/3 phase /60Hz
Enclosure : IP- 55
Insulation class : F
E- motor material : cast iron
Standard painting colour : RAL 7030 (grey, epoxy coating)
35
Continuation technical specification:
BUILD ON PARTS:
Manuals:
The LT 20-30 compressor will standard be delivered with one instruction manual and one part list on CD-ROM
in PDF format. Also one test certificate will be delivered in hard copy format.
Common information:
This starting air compressor can easy be installed without any special tools or other resources.
Its also plug and play, you only have to install the pressure hose to your existing pipe system and install the
electrical wiring to your control panel.
* Free Air Delivery measured according ISO 1217 with reference conditions:
Absolute inlet pressure : 1 bar
Intake air and coolant temperature : 20°C
36
37
Atlas Copco Ketting marine Center
Starter boxes
The starter boxes from Atlas Copco Ketting Marine Center are speccially
designed for our starting air compressors and are ideal for marine- and
industrial applications.
For marine applications the starter boxes are build according to different
classification societies such as:
38
39
Atlas Copco Ketting marine Center
Complete compressed air equipment
service and working air compressors, dryers and air receivers can be
In this way Atlas Copco Ketting Marine Center offers you the following
advantages:
For marine applications the compressed air equipment range is build accor-
- Bureau Veritas
- Germanischer Lloyd
40
STARTING AIR MODULES
TECHNICAL DATA
MOD LT3-30KE003
41
42
Atlas Copco Ketting Marine Module type MOD LT 3-30KE003
According to drawing MODLT3-30KE003
Construction description:
• 2x Vertical air receiver 250 liter / 30 bar with DN38 valve head
All parts are build together on a common base frame including piping / couplings / fittings
/ electrical wirings /etc.
Dimensions:
Dimensions ( L x W x H ) :1270x1060x1978mm
43
STARTING AIR MODULES
TECHNICAL DATA
MOD LT3-30KE005
44
45
46
47
48
Atlas Copco Ketting Marine Module type MOD LT 3-30KE005
According to drawing MODLT3-30KE005
Construction description:
All parts are build together on a common base frame including piping / couplings / fittings / electrical wirings
/etc.
Dimensions:
Dimensions ( L x W x H ) :1460x1015x1000 mm
49
STARTING AIR MODULES
TECHNICAL DATA
MOD LT5-30KE001
50
51
52
53
Atlas Copco Ketting Marine Module type MOD LT 5-30KE001
According to drawing MODLT5-30KE001
Construction description:
• 2x Horizontal air receiver 150 liter / 30 bar with DN38 valve head
All parts are build together on a common base frame including piping / couplings / fittings
/ electrical wirings /etc.
Dimensions:
Dimensions ( L x W x H ) :1800x1000x1615mm
54
STARTING AIR MODULES
TECHNICAL DATA
MOD LT5-30KE002
55
56
57
Atlas Copco Ketting Marine Module type MOD LT 5-30KE002
According to drawing MODLT5-30KE002
Construction description:
• 2x Horizontal air receiver 250 liter / 30 bar with DN38 valve head
• 1x Atlas Copco adsorption dryer type CD12 (including standard dust filters)
All parts are build together on a common base frame including piping / couplings / fittings
/ electrical wirings /etc.
Dimensions:
Dimensions ( L x W x H ) :1200x1900x1580mm
58
STARTING AIR MODULES
TECHNICAL DATA
MOD LT15-30KE002
59
60
61
62
Atlas Copco Ketting Marine Module type MOD LT 15-30KE002
According to drawing MODLT15-30KE002
Construction description:
• 2x Horizontal air receiver 1000 liter / 30 bar with DN38 valve head
All parts are build together on a common base frame including piping / couplings / fittings
/ electrical wirings /etc.
Dimensions:
63