Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 5

ITEM DESCRIPTION UNIT QTY RATE AMOUNT

FINISHERS
A Cement and sand (mix1:4) in 20mm thick screed
bed to receive tiles measured separately
B Supply and fix 350x350 ceramic tiles
C Ditto 100mm tiles skirting
INTERNAL FINISHERS
D Cement and Sand (Mix 1:3) In 15mm Thick Plaster
to Colum, Beam and Wall Surface
E Prepare and Apply One coat crown penetrating
primer a two finishing coat of crown silk vinyl
emulsion paint on a concrete and wall surface in
ditto.
F 250X20MM ceramic wall tiles
H Prepare and Apply One coat crown penetrating
primer a two finishing coat of crown silk vinyl
Emulsion paint on a plastered soffit in ditto in
ceiling finishers
EXTERNAL FINISHERS
J Cement and sand (1:3) min 15mm thick render to
column, beams and wall surface.
J Prepare and apply tree coats of external paint.
STAIRCASE FINISHER
K Cement and Sand (Mix 1:3) In 12mm Thick Plaster
to
L Horizontal and slopping soffits of landing.
Prepare and Apply One coat crown penetrating
primer a two finishing coat of crown silk vinyl
emulsion paint on plastered horizontal a slopping
M soffits as before described.
Cement and sand (mix1:4) in 20mm thick screed
N bed in landing.
O Supply and Fix 350x350 ceramic tiles.
Cement and sand (mix1:4) in 20mm tick screed bed
P in risers 150mm high.
Q Supply and fix ceramic tiles
Cement and sand (mix1:4) in 20mm tick screed bed
R in treads 300mm wide.
S Supply and fix ceramic tiles
Cement and sand (mix1:4) in 20mm tick screed bed
T in open string 150mm high.
Supply and fix ceramic tiles

PG8 TOTAL FINISHERS CARRIED IN SUMMARY


ITEM DESCRIPTION UNIT QTY RATE AMOUNT
The following in prime grade well-seasoned
mvule or other equal and approved.
A 150X50mm frame with 2no. labours, plugged
Panel doors
B 50mm thick paneled door overall size
900x2400mm high; with raised timber panel
including 6mm thick georgian wired glass in
C fanlight.
50mm thick paneled door overall size
750x2500mm high; with raised timber panel.
Painting
Knot, prime, stop, prepare and apply three
D coats of 2-pack polyurethane matt varnish to:
E General surface of the timber.
Ditto over 200mm but not exceeding 300mm
F girth
G Ironmongery
H 10mm but brass but hinges.
I 2lever locks.
100mm brass bolt stopper.
J 3- lever mortice lock as “UNION” or other
equal and approved and set of aluminum lever
handle furniture
Door stop
TOTAL DOORS CURRIED TO SUMMARY

A WINDOWS
B Aluminum sliding /casement window with
C approved glazing
D 1500mmx1500high sliding windows
1200mmx1200mm high sliding window
600mm x600mm high sliding windows
750mmx300mm high
TOTALWINDOW CURRIED TO SUMMARY

FITTING
1800X600X2100 High wardrobe
Kitchen worktop – 1800x600x800mm high

PG9 TOTAL FEEDINGS CARRIED OUT TO SUMMERY


ITEM DESCRIPTION PAGE AMOUNT

FIRST FLOOR SUMMARY


1 CONCRETE SUPERSTRACTURES
2 WALLING
3 BALUSTRANDING
4 FINISHERS
5 DOORS
6 WINDOWS
7 FITTINGS

TOTAL FIRST FLOOR CARRIED TO


SUMMARY
TOTAL FOR 4 NO. FLOORS

PG TOTAL FOR FIRST, SECOND AND


10 THIRD FLOORS
ITEM DESCRIPTION UNIT QTY RATE AMOUNT
ROOF TERACY FLOOR

CONCRETE SUPERSTRACTURE
Vibrated insets reinforce concrete class 25/20 giving
minimum crushing strength of 25N/mm of 28 days
as described in
A Beams
Columns
150mm thick suspended slap
Reinforcements
Bars, high tensile steel, col

You might also like