Professional Documents
Culture Documents
Link Planner Release Notes v6.1.3
Link Planner Release Notes v6.1.3
3
June 2023
The information in this document is subject to change without notice. The recommendations, technical
data, configurations and statements in this document are believed to be reliable and accurate, but are
presented without implied or express warranty. Users must take full responsibility for their applications of
any product specified in this document. The information in this document is proprietary to Cambium
Networks Ltd.
Introduction
This document provides information for the Cambium Networks LINKPlanner version
V6.1.3.
The LINKPlanner is an application that runs in a modern web browser. It performs the
calculations from the ITU recommendations ITU-R P.526-10/ITU-R P.526-15 and ITU-R
P.530-12/ITU-R P.530-17 (or Vigants-Barnett) to predict NLoS and LoS paths for
anywhere in the world.
The LINKPlanner provides results specific to the 60 GHz cnWave, ePMP, PTP 450,
PTP 450i and PTP 670 family of wireless bridges and cnWave 5G Fixed, 60 GHz
cnWave, cnReach, PMP 450, PMP 450i, PMP450m and ePMP family of PMP network
devices, giving the data rates and reliability that can be expected given the specific
design features of these products.
phn-5476-009v000 Page 1 of 6
o Ensured they update correctly after deletion and hide properly when there
are collocated sites
o Correctly use existing configuration when selecting the "Create from
existing" option
o Maintain network site naming when there are collocated subscriber sites
o Use appropriate display resolution for heights and ranges
o Prevented height above clutter options being used when Clutter is not
enabled
o Ensured that pending or failed viewsheds are only displayed on relevant
project
• Update Save/Discard icon colors correctly when saving a project from the main
menu
• Display limit warnings appropriately in the UI when adding sites, Network
Devices and links
• Persist user selected column order in sites tables, within the project and between
projects as for other tables
• Corrected PTP tables to use correct default columns and logical sorting, rather
than sorting by string
• Prevented the Delete option being active on links in a read only project
• Corrected 60 GHz cnWave adjacent sector warning so that it only applies if
sectors are on the same channel
• Ensured that the ND templates are recalculated correctly after a software update
or project level recalculation
• Modified the CSV export precision to match the table view precision
• Prevented UI crashing when toggling from PTP links to table view
• Prevented user entering negative IP Required limits in Performance Summary
• Improved the Path Profile vertical scale labels
• Ensured that clutter height edits are used correctly in the Best Server Analysis
• Matched the SM antenna polarity with that at the ND for cnReach single
polarization antennas
• Prevented the creation of PTP links from the same start and end location
phn-5476-009v000 Page 2 of 6
• Prevent the user power/EIRP from being set as a string
phn-5476-009v000 Page 4 of 6
Bug Fixes in version 6.0.2
• Prevent zero length links from causing errors
• ePMP - mark CMM5 as retired
• PMP 450m - changed default to Mu-MIMO mode
• Corrected aggregation of parts shared between CMM5 and other products and
aggregation of cable products from optional extras
• ePMP MP 3000 MicroPop corrected Surge Suppressor and Power Supply to 56V
devices
• Ensure that projects without profiles can be imported
phn-5476-009v000 Page 6 of 6