RELAY PANEL ASSEMBLIES - AIRPLANE ZONE 153 - REMOVAL/INSTALLATION
1. Relay Panel Assemblies - Airplane Zone 153 Individual relay panel assemblies can be removed/installed as follows: A. Removal (1) Remove the center aisle floor immediately aft of the main spar. (2) Remove the six screws securing the relay panel assembly to the bracket. (3) Unplug the assembly from the connector by pulling the plug of the panel assembly straight out of the receptacle. B. Installation (1) Insert the plug of the panel assembly into the receptacle. (2) Apply pressure to mate the plug fully into the receptacle while supporting the receptacle. (3) Secure the assembly to the brackets with the six screws. (4) Install the center aisle floor.