Professional Documents
Culture Documents
LM 339
LM 339
LM 339
1 Features 3 Description
• NEW LM339B and LM2901B The LM339B and LM2901B devices are the
• Improved specifications of B-version next generation versions of the industry-standard
– Maximum rating: up to 38 V LM339 and LM2901 comparator family. These next
– ESD rating (HBM): 2k V generation B-version comparators feature lower offset
– Low input offset: 0.37 mV voltage, higher supply voltage capability, lower supply
– Low input bias current: 3.5 nA current, lower input bias current, lower propagation
– Low supply-current: 200 µA per comparator delay, and improved 2 kV ESD performance and
– Faster response time of 1 µsec input ruggedness through dedicated ESD clamps.
– Extended temperature range for LM339B The LM339B and LM2901B can drop-in replace the
• B-version is drop-in replacement for LM239, LM239, LM339 and LM2901, for both "A" and "V"
LM339 and LM2901, A and V versions grades.
• Common-mode input voltage range includes All devices consist of four independent voltage
ground comparators that are designed to operate from a
• Differential input voltage range equal to maximum- single power supply over a wide range of voltages.
rated supply voltage: ±38 V
• Low output saturation voltage Device Information
• Output compatible with TTL, MOS, and CMOS PART NUMBER PACKAGE (1) BODY SIZE (NOM)
• For single version, see the TL331B LM139x CDIP (14) 21.30 mm × 7.60 mm
• For dual version, see the LM393B or LM2903B LM139x, LM239x, LM339x,
LM2901x, LM339B, SOIC (14) 8.70 mm × 3.90 mm
2 Applications LM2901B
• Vacuum robot LM239, LM339x, LM2901 PDIP (14) 19.30 mm × 6.40 mm
• Single phase UPS LM239, LM2901, LM339B,
TSSOP (14) 5.00 mm × 4.40 mm
• Server PSU LM2901B
• Cordless power tool LM339x, LM2901, LM339B,
SO (14) 10.20 mm × 5.30 mm
• Wireless infrastructure LM2901B
• Applicances LM339x, LM339B SSOP (14) 6.50 mm × 5.30 mm
• Building automation SOT-23 (14) 4.20 mm x 2.00 mm
• Factory automation & control LM2901B
• Motor drives WQFN (16) 3.00 mm x 3.00 mm
• Infotainment & cluster
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Family Comparison Table
LM339 LM2901 LM2901V LM139 LM239
Specification LM339B LM2901B Units
LM339A LM2901A LM2901AV LM139A LM239A
Supply Voltage 2 to 36 2 to 36 2 to 30 2 to 30 2 to 32 2 to 30 2 to 30 V
Total Supply Current
0.8 to 1 0.8 to 1 1 to 2.5 1 to 2.5 1 to 2.5 1 to 2.5 1 to 2.5 mA
(5V to 36V max)
Temperature Range −40 to 85 −40 to 125 0 to 70 −40 to 125 −40 to 125 −55 to 125 −25 to 85 °C
ESD (HBM) 2000 2000 1000 1000 1000 1000 1000 V
Offset Voltage ±9 ± 15 ± 15 ±9 ±9
± 5.5 ± 5.5 mV
(Max over temp) ±4 ±4 ±4 ±4 ±4
Input Bias Current (typ / max) 3.5 / 25 3.5 / 25 25 / 250 25 / 250 25 / 250 25 / 100 25 / 250 nA
Response Time (typ) 1 1 1.3 1.3 1.3 1.3 1.3 µsec
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022 www.ti.com
Table of Contents
1 Features............................................................................1 7.16 Switching Characteristics for LMx39 and LMx39A..13
2 Applications..................................................................... 1 7.17 Switching Characteristics for LM2901.....................13
3 Description.......................................................................1 7.18 Typical Characteristics for LM339B and
4 Revision History.............................................................. 3 LM2901B Only.............................................................14
5 Other Versions................................................................. 4 7.19 Typical Characteristics, Non-B Versions................. 20
6 Pin Configuration and Functions...................................5 8 Detailed Description......................................................22
7 Specifications.................................................................. 6 8.1 Overview................................................................... 22
7.1 Absolute Maximum Ratings for LM339B and 8.2 Functional Block Diagram......................................... 22
LM2901B....................................................................... 6 8.3 Feature Description...................................................22
7.2 Absolute Maximum Ratings for Non-B Versions......... 6 8.4 Device Functional Modes..........................................22
7.3 ESD Ratings for LM339B and LM2901B.................... 7 9 Application and Implementation.................................. 23
7.4 ESD Ratings, Non-B Versions.................................... 7 9.1 Application Information............................................. 23
7.5 Recommended Operating Conditions for 9.2 Typical Application.................................................... 23
LM339B and LM2901B..................................................7 10 Power Supply Recommendations..............................25
7.6 Recommended Operating Conditions, Non-B 11 Layout........................................................................... 26
Versions.........................................................................7 11.1 Layout Guidelines................................................... 26
7.7 Thermal Information for LM339B and LM2901B.........8 11.2 Layout Example...................................................... 26
7.8 Thermal Information for Non-B Versions.....................8 12 Device and Documentation Support..........................27
7.9 Electrical Characteristics for LM339B......................... 9 12.1 Related Links.......................................................... 27
7.10 Electrical Characteristics for LM2901B..................... 9 12.2 Receiving Notification of Documentation Updates..27
7.11 Electrical Characteristics for LM139 and LM139A.. 10 12.3 Support Resources................................................. 27
7.12 Electrical Characteristics for LMx39 and LMx39A...11 12.4 Trademarks............................................................. 27
7.13 Electrical Characteristics for LM2901, 12.5 Electrostatic Discharge Caution..............................27
LM2901V and LM2901AV........................................... 12 12.6 Glossary..................................................................27
7.14 Switching Characteristics for LM139 and 13 Mechanical, Packaging, and Orderable
LM139A....................................................................... 13 Information.................................................................... 28
7.15 Switching Characteristics for LM339B and
LM2901B..................................................................... 13
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
5 Other Versions
OTHER QUALIFIED VERSIONS OF LM139-SP, LM239A, LM2901, LM2901AV, LM2901V:
• Automotive Q100: LM239A-Q1, LM2901B-Q1, LM2901-Q1, LM2901AV-Q1, LM2901V-Q1
• Enhanced Product: LM239A-EP
• Space: LM139-SP
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
OUT1
OUT2
OUT3
OUT4
1OUT 1 14 3OUT
2OUT 2 13 4OUT
16
15
14
13
VCC 3 12 GND VCC 1 12 GND
8
1IN+ 7 8 3IN–
IN2±
IN2+
IN3±
IN3+
Figure 6-1. D, DB, N, NS, PW, DYY, J Packages Not to scale
14-Pin SOIC, SSOP, PDIP, SO, TSSOP, SOT-23, NOTE: Connect exposed thermal pad directly to GND pin.
CDIP Figure 6-2. RTE Package
Top View 16-Pad WQFN With Exposed Thermal Pad
Top View
(1) Some manufacturers transpose the names of channels 1 & 2. Electrically the pinouts are identical, just a difference in the channel
naming convention.
7 Specifications
7.1 Absolute Maximum Ratings for LM339B and LM2901B
over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
Supply voltage: VS = (V+) – (V–) -0.3 38 V
Differential input voltage : VID (2) ±38 V
Input pins (IN+, IN–) -0.3 38 V
Current into input pins (IN+, IN–) -50 mA
Output pin (OUT) -0.3 38 V
Output sink current 25 mA
Output short-circuit duration(3) Unlimited s
Junction temperature, TJ TBD 150 °C
Storage temperature, Tstg -65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress
ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under
Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability.
(2) Differential voltages are at IN+ with respect to IN-
(3) Short circuits from outputs to V+ can cause excessive heating and eventual destruction.
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to network ground.
(3) Differential voltages are at xIN+ with respect to xIN–.
(4) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
(5) Input current flows through parasitic diode to ground and will turn on parasitic transistors that will increase ICC and may cause output to
be incorrect. Normal operation resumes when input is removed.
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
(1) For more information about traditional and new thermal metrics, see the Semicondctor and IC Package Thermal Metrics report,
SPRA953.
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
(1) The voltage at either input should not be allowed to go negative by more than 0.3 V otherwise output may be incorrect and excessive
input current can flow. The upper end of the common-mode voltage range is limited by VCC – 2V. However only one input needs to be
in the valid common mode range, the other input can go up the maximum VCC level and the comparator provides a proper output state.
Either or both inputs can go to maximum VCC level without damage.
(2) This parameter is ensured by design and/or characterization and is not tested in production.
(1) The voltage at either input should not be allowed to go negative by more than 0.3 V otherwise output may be incorrect and excessive
input current can flow. The upper end of the common-mode voltage range is limited by VCC – 2V. However only one input needs to be
in the valid common mode range, the other input can go up the maximum VCC level and the comparator provides a proper output state.
Either or both inputs can go to maximum VCC level without damage.
(2) This parameter is ensured by design and/or characterization and is not tested in production.
25°C 3 25 3 25
IIO Input offset current VO = 1.4 V nA
Full range 100 100
25°C –25 –100 –25 –100
IIB Input bias current VO = 1.4 V nA
Full range –300 –300
0 to 0 to
25°C
Common-mode input- VCC – 1.5 VCC – 1.5
VICR V
voltage range(3) 0 to 0 to
Full range
VCC – 2 VCC – 2
Large-signal differential- VCC+ = ±7.5 V,
AVD 25°C 200 50 200 V/mV
voltage amplification VO = –5 V to 5 V
VOH = 5 V 25°C 0.1 0.1 nA
IOH High-level output current VID = 1 V
VOH = 30 V Full range 1 1 μA
25°C 150 400 150 400
VOL Low-level output voltage VID = –1 V, IOL = 4 mA mV
Full range 700 700
IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA
Supply current
ICC VO = 2.5 V, No load 25°C 0.8 2 0.8 2 mA
(four comparators)
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM139 and LM139A is –55°C to +125°C. All characteristics are measured with zero common-mode input
voltage, unless otherwise specified.
(3) The voltage at either input or common-mode must not be allowed to go negative by more than 0.3 V. The upper end of the
common-mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output
state as long as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
25°C 5 50 5 50
IIO Input offset current VO = 1.4 V nA
Full range 150 150
25°C –25 –250 –25 –250
IIB Input bias current VO = 1.4 V nA
Full range –400 –400
0 to 0 to
25°C
Common-mode input- VCC – 1.5 VCC – 1.5
VICR V
voltage range(3) 0 to 0 to
Full range
VCC – 2 VCC – 2
VCC = 15 V,
Large-signal differential-
AVD VO = 1.4 V to 11.4 V, 25°C 50 200 50 200 V/mV
voltage amplification
RL ≥ 15 kΩ to VCC
VOH = 5 V 25°C 0.1 50 0.1 50 nA
IOH High-level output current VID = 1 V
VOH = 30 V Full range 1 1 μA
25°C 150 400 150 400
VOL Low-level output voltage VID = –1 V, IOL = 4 mA mV
Full range 700 700
IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA
Supply current
ICC VO = 2.5 V, No load 25°C 0.8 2 0.8 2 mA
(four comparators)
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM239/LM239A is –25°C to +85°C, and for LM339/LM339A is 0°C to 70°C. All characteristics are
measured with zero common-mode input voltage, unless otherwise specified.
(3) The voltage at either input or common-mode must not be allowed to go negative by more than 0.3 V. The upper end of the
common-mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output
state as long as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM2901 is –40°C to +125°C. All characteristics are measured with zero common-mode input voltage,
unless otherwise specified.
(3) VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices
(4) The voltage at either input or common-mode must not be allowed to go negative by more than 0.3 V. The upper end of the
common-mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output
state as long as the other input remains in the common-mode range. Either or both inputs can go to VCC MAX without damage.
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
RL connected to 5 V through 5.1 kΩ, 100-mV input step with 5-mV overdrive 1.3
Response time μs
CL = 15 pF(1) (2) TTL-level input step 0.3
RL connected to 5 V through 5.1 kΩ, 100-mV input step with 5-mV overdrive 1.3
Response time μs
CL = 15 pF(1) (2) TTL-level input step 0.3
RL connected to 5 V through 5.1 kΩ, 100-mV input step with 5-mV overdrive 1.3
Response time μs
CL = 15 pF(1) (2) TTL-level input step 0.3
1100 1000
No Load, Output High
900
1000
800
Total Supply Current (uA)
700 500
400
600 -40°C
-40°C 300 0°C
25°C 25°C
500 85°C 200 85°C
125°C VS=3V 125°C
400 100
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 -0.5 -0.25 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2
Supply Voltage (V) Input Voltage (V)
Figure 7-1. Total Supply Current vs. Supply Voltage Figure 7-2. Total Supply Current vs. Input Voltage at 3V
1000 1000
900 900
800 800
Total Supply Current (A)
700 700
600 600
500 500
400 400
-40°C -40°C
300 0°C 300 0°C
25°C 25°C
200 85°C 200 85°C
VS=3.3V 125°C VVSS=12V
=5V
=3V 125°C
100 100
-0.5 -0.25 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 -0.5 -0.25 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2
Input Voltage (V) Input Voltage (V)
Figure 7-3. Total Supply Current vs. Input Voltage at 3.3V Figure 7-4. Total Supply Current vs. Input Voltage at 5V
1000 1100
900 1000
800 900
Total Supply Current (A)
Total Supply Current (A)
700 800
600 700
500 600
400 500
-40°C -40°C
300 0°C 400 0°C
25°C 25°C
200 85°C 300 85°C
VS=12V 125°C VS=36V 125°C
100 200
-1 0 1 2 3 4 5 6 7 8 9 10 11 0 3 6 9 12 15 18 21 24 27 30 33 36
Input Voltage (V) Input Voltage (V)
Figure 7-5. Total Supply Current vs. Input Voltage at 12V Figure 7-6. Total Supply Current vs. Input Voltage at 36V
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
2 2
1.5 1.5
Input Offset Voltage (mV)
0.5 0.5
0 0
-0.5 -0.5
-1 -1
-1.5 VS = 3V -1.5 VS = 5V
63 Channels 62 Channels
-2 -2
-40 -25 -10 5 20 35 50 65 80 95 110 125 -40 -25 -10 5 20 35 50 65 80 95 110 125
Temperature (°C) Temperature (°C)
Figure 7-7. Input Offset Voltage vs. Temperature at 3V Figure 7-8. Input Offset Voltage vs. Temperature at 5V
2 2
1.5 1.5
Input Offset Voltage (mV)
1 1
0.5 0.5
0 0
-0.5 -0.5
-1 -1
1.5 1.5
Input Offset Voltage (mV)
1 1
0.5 0.5
0 0
-0.5 -0.5
-1 -1
2 2
1.5 1.5
Input Offset Voltage (mV)
0.5 0.5
0 0
-0.5 -0.5
-1 -1
-1.5
-1
-2 -1.5
-2.5 -2
-3 -2.5
-3.5 125°C -3
125°C
85°C -3.5 85°C
-4 25°C 25°C
-4
0°C 0°C
-4.5
-40°C -4.5 -40°C
-5 -5
-0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5 10.5 0 4 8 12 16 20 24 28 32 36
Input Voltage (V) Input Voltage (V)
Figure 7-17. Input Bias Current vs. Input Voltage at 12V Figure 7-18. Input Bias Current vs. Input Voltage at 36V
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
10 10
VS = 3V VS = 5V
Output Voltage to GND (V)
100m 100m
125°C 125°C
10m 85°C 10m 85°C
25°C 25°C
0°C 0°C
-40°C -40°C
1m 1m
10P 100P 1m 10m 100m 10P 100P 1m 10m 100m
Output Sinking Current (A) Output Sinking Current (A)
Figure 7-19. Output Low Voltage vs. Output Sinking Current at Figure 7-20. Output Low Voltage vs. Output Sinking Current at
3V 5V
10 10
VS = 12V VS = 36V
Output Voltage to GND (V)
1 1
100m 100m
125°C 125°C
10m 85°C 10m 85°C
25°C 25°C
0°C 0°C
-40°C -40°C
1m 1m
10P 100P 1m 10m 100m 10P 100P 1m 10m 100m
Output Sinking Current (A) Output Sinking Current (A)
Figure 7-21. Output Low Voltage vs. Output Sinking Current at Figure 7-22. Output Low Voltage vs.Output Sinking Current at
12V 36V
100 100
50 Output set high 50 Output set high
Output High Leakage to GND (nA)
VOUT = VS VOUT = VS
20 20
10 10
5 5
2 2
1 1
0.5 0.5
0.2 0.2
0.1 0.1
0.05 0.05
0.02 0.02
0.01 0.01
-40 -25 -10 5 20 35 50 65 80 95 110 125 -40 -25 -10 5 20 35 50 65 80 95 110 125
Temperature (°C) Temperature (°C)
Figure 7-23. Output High Leakage Current vs.Temperature at 5V Figure 7-24. Output High Leakage Current vs. Temperature at
36V
1000 1000
VS = 5V 125°C VS = 5V 125°C
900 900
Propagation Delay, High to Low (ns)
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
6 6
VREF = VCC/2 VREF = VCC/2
5 5
4 4
Output Voltage (V)
0 0
-1 -1
-0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 -0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1
Time (Ps) Time (Ps)
Figure 7-31. Response Time for Various Overdrives, High-to- Figure 7-32. Response Time for Various Overdrives, Low-to-
Low Transition High Transition
1.8 80
1.6 70
TA = –55°C
TA = –55°C
1.4
TA = 0°C
1.2 TA = 0°C
50
1 TA = 25°C
TA = 70°C
40
0.8 TA = 70°C
TA = 125°C
30
0.6 TA = 125°C
20
0.4
0.2 10
0 0
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
VCC – Supply Voltage – V VCC – Supply Voltage – V
Figure 7-33. Supply Current vs Supply Voltage Figure 7-34. Input Bias Current vs Supply Voltage
10 6
5
Overdrive = 5 mV
VO – Saturation Voltage – V
1
VO – Output Voltage – V
4
TA = 125°C
Overdrive = 20 mV
TA = 25°C 3
0.1 Overdrive = 100 mV
TA = –55°C 2
1
0.01
0.001 -1
0.01 0.1 1 10 100 -0.3 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25
Figure 7-35. Output Saturation Voltage Figure 7-36. Response Time for Various Overdrives
Negative Transition
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
Overdrive = 5 mV
VO – Output Voltage – V
4
Overdrive = 20 mV
3
Overdrive = 100 mV
2
-1
-0.3 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25
t – Time – µs
8 Detailed Description
8.1 Overview
The LMx39 and LM2901x are quad comparators with the ability to operate up to an absolute maximum of 36 V
on the supply pin. This standard device has proven ubiquity and versatility across a wide range of applications.
This is due to very wide supply voltages range (2 V up to 32 V), low Iq, and fast response of the device.
The open-drain output allows the user to configure the output logic low voltage (VOL) and allows the comparator
to be used in AND functionality.
8.2 Functional Block Diagram
VCC
80-µA
Current Regulator
10 µA 60 µA 10 µA 80 µA
COMPONENT COUNT
Epi-FET 1
Diodes 2
IN+ Resistors 2
OUT Transistors 30
IN−
GND
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
The following list describes the outcomes of some input voltage situations.
• When both IN– and IN+ are both within the common-mode range:
– If IN– is higher than IN+ and the offset voltage, the output is low and the output transistor is sinking current
– If IN– is lower than IN+ and the offset voltage, the output is high impedance and the output transistor is
not conducting
• When IN– is higher than common mode and IN+ is within common mode, the output is low and the output
transistor is sinking current
• When IN+ is higher than common mode and IN– is within common mode, the output is high impedance and
the output transistor is not conducting
• When IN– and IN+ are both higher than common mode, the output is low and the output transistor is sinking
current
9.2.2.2 Minimum Overdrive Voltage
Overdrive voltage is the differential voltage produced between the positive and negative inputs of the comparator
over the offset voltage (VIO). To make an accurate comparison, the overdrive voltage (VOD) must be higher than
the input offset voltage (VIO). Overdrive voltage can also determine the response time of the comparator, with
the response time decreasing with increasing overdrive. Figure 9-2 and Figure 9-3 show positive and negative
response times with respect to overdrive voltage.
9.2.2.3 Output and Drive Current
Output current is determined by the load and pullup resistance and logic and pullup voltage. The output current
produces a low-level output voltage (VOL) from the comparator, where VOL is proportional to the output current.
The output current can also effect the transient response.
9.2.2.4 Response Time
Response time is a function of input over-drive. See the Section 7.19 graphs for typical response times. The rise
and fall times can be determined by the load capacitance (CL), load/pull-up resistance (RPULLUP) and equivalent
collector-emitter resistance (RCE).
• The rise time (τR) is approximately τR~ RPULLUP × CL
• The fall time (τF) is approximately τF ~ RCE × CL
– RCE can be determined by taking the slope of Figure 7-35 in its linear region at the desired temperature, or
by dividing the VOL by IOUT
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
6 6
5 5
Output Voltage, Vo(V)
3 3
2 5mV OD 2
5mV OD
1 20mV OD 1
20mV OD
0 0
100mV OD 100mV OD
±1 ±1
-0.25 0.25 0.75 1.25 1.75 2.25 ±0.25 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00
Time (usec) C004 Time (usec) C006
Figure 9-2. Response Time vs Output Voltage Figure 9-3. Response Time vs Output Voltage
(Positive Transition) (Negative Transition)
11 Layout
11.1 Layout Guidelines
To create an accurate comparator application without hysteresis, maintain a stable power supply with minimized
noise and glitches, which can affect the high level input common-mode voltage range. To achieve this accuracy,
add a bypass capacitor between the supply voltage and ground. Place a bypass capacitor on the positive power
supply and negative supply (if available).
Note
If a negative supply is not being used, do not place a capacitor between the GND pin of the device
and system ground.
Bypass 1 14 3OUT
Capacitor
1OUT
0.1 μF 2OUT 2 13 4OUT
Positive Supply VCC 3 12 GND Negative Supply or Ground
1IN+ 7 8 3IN–
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
LM139, LM239, LM339, LM339B, LM139A, LM239A
LM339A, LM2901B, LM2901, LM2901AV, LM2901V
www.ti.com SLCS006V – OCTOBER 1979 – REVISED DECEMBER 2022
12.6 Glossary
TI Glossary This glossary lists and explains terms, acronyms, and definitions.
Product Folder Links: LM139 LM239 LM339 LM339B LM139A LM239A LM339A LM2901B LM2901 LM2901AV
LM2901V
PACKAGE OPTION ADDENDUM
www.ti.com 29-Jun-2023
PACKAGING INFORMATION
Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) Ball material (3) (4/5)
(6)
LM139AD ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A Samples
LM139ADG4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A Samples
LM139ADR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A Samples
LM139ADRG4 ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A Samples
LM139D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 LM139 Samples
LM139DG4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 LM139 Samples
LM139DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 LM139 Samples
LM139DRG4 ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 LM139 Samples
LM239AD ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A Samples
LM239ADE4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A Samples
LM239ADR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -25 to 85 LM239A Samples
LM239ADRE4 LIFEBUY SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A
LM239ADRG4 LIFEBUY SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A
LM239D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 LM239 Samples
LM239DE4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 LM239 Samples
LM239DG4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 LM239 Samples
LM239DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -25 to 85 LM239 Samples
LM239DRG3 ACTIVE SOIC D 14 2500 RoHS & Green SN Level-1-260C-UNLIM -25 to 85 LM239 Samples
LM239DRG4 ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 LM239 Samples
LM239N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU | SN N / A for Pkg Type -25 to 85 LM239N Samples
LM239NE4 LIFEBUY PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -25 to 85 LM239N
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com 29-Jun-2023
Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) Ball material (3) (4/5)
(6)
LM239PW ACTIVE TSSOP PW 14 90 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 L239 Samples
LM239PWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -25 to 85 L239 Samples
LM239PWRG4 LIFEBUY TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -25 to 85 L239
LM2901AVQDR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV Samples
LM2901AVQDRG4 ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV Samples
LM2901AVQPWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV Samples
LM2901AVQPWRG4 ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV Samples
LM2901BIPWR ACTIVE TSSOP PW 14 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901B Samples
LM2901D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 Samples
LM2901DE4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 Samples
LM2901DG4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 Samples
LM2901DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -40 to 125 LM2901 Samples
LM2901DRE4 LIFEBUY SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901
LM2901DRG3 ACTIVE SOIC D 14 2500 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 LM2901 Samples
LM2901DRG4 LIFEBUY SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901
LM2901N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 125 LM2901N Samples
LM2901NE4 LIFEBUY PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 125 LM2901N
LM2901NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 Samples
LM2901PW ACTIVE TSSOP PW 14 90 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901 Samples
LM2901PWG4 ACTIVE TSSOP PW 14 90 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901 Samples
LM2901PWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM -40 to 125 L2901 Samples
LM2901PWRG3 ACTIVE TSSOP PW 14 2000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 L2901 Samples
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com 29-Jun-2023
Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) Ball material (3) (4/5)
(6)
LM2901PWRG4 ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901 Samples
LM2901VQDR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V Samples
LM2901VQPWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V Samples
LM2901VQPWRG4 ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V Samples
LM339AD ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A Samples
LM339ADBR ACTIVE SSOP DB 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 L339A Samples
LM339ADE4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A Samples
LM339ADG4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A Samples
LM339ADR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM 0 to 70 LM339A Samples
LM339ADRE4 LIFEBUY SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A
LM339ADRG4 LIFEBUY SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A
LM339AN ACTIVE PDIP N 14 25 RoHS & Green NIPDAU | SN N / A for Pkg Type 0 to 70 LM339AN Samples
LM339ANE4 LIFEBUY PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 LM339AN
LM339ANSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A Samples
LM339APWG4 ACTIVE TSSOP PW 14 90 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 L339A Samples
LM339APWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM 0 to 70 L339A Samples
LM339APWRG4 ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 L339A Samples
LM339BIPWR ACTIVE TSSOP PW 14 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 LM339B Samples
LM339D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 Samples
LM339DBR ACTIVE SSOP DB 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 Samples
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com 29-Jun-2023
Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) Ball material (3) (4/5)
(6)
LM339DE4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 Samples
LM339DG4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 Samples
LM339DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM 0 to 70 LM339 Samples
LM339DRE4 LIFEBUY SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339
LM339DRG3 ACTIVE SOIC D 14 2500 RoHS & Green SN Level-1-260C-UNLIM 0 to 70 LM339 Samples
LM339DRG4 LIFEBUY SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339
LM339N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU | SN N / A for Pkg Type 0 to 70 LM339N Samples
LM339NE3 ACTIVE PDIP N 14 25 RoHS & SN N / A for Pkg Type 0 to 70 LM339N Samples
Non-Green
LM339NE4 ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 LM339N Samples
LM339NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 Samples
LM339PWG4 ACTIVE TSSOP PW 14 90 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 L339 Samples
LM339PWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU | SN Level-1-260C-UNLIM 0 to 70 L339 Samples
LM339PWRE4 LIFEBUY TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 L339
LM339PWRG3 ACTIVE TSSOP PW 14 2000 RoHS & Green SN Level-1-260C-UNLIM 0 to 70 L339 Samples
LM339PWRG4 LIFEBUY TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 L339
PLM339BIDR ACTIVE SOIC D 14 3000 TBD Call TI Call TI -40 to 85 Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com 29-Jun-2023
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
• Enhanced Product - Supports Defense, Aerospace and Medical Applications
Addendum-Page 5
PACKAGE OPTION ADDENDUM
www.ti.com 29-Jun-2023
• Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
Addendum-Page 6
PACKAGE MATERIALS INFORMATION
www.ti.com 29-Jun-2023
B0 W
Reel
Diameter
Cavity A0
A0 Dimension designed to accommodate the component width
B0 Dimension designed to accommodate the component length
K0 Dimension designed to accommodate the component thickness
W Overall width of the carrier tape
P1 Pitch between successive cavity centers
Sprocket Holes
Q1 Q2 Q1 Q2
Pocket Quadrants
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com 29-Jun-2023
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com 29-Jun-2023
Width (mm)
H
W
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com 29-Jun-2023
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM2901DR SOIC D 14 2500 364.0 364.0 27.0
LM2901DRG3 SOIC D 14 2500 364.0 364.0 27.0
LM2901DRG4 SOIC D 14 2500 356.0 356.0 35.0
LM2901DRG4 SOIC D 14 2500 340.5 336.1 32.0
LM2901NSR SO NS 14 2000 356.0 356.0 35.0
LM2901PWR TSSOP PW 14 2000 356.0 356.0 35.0
LM2901PWR TSSOP PW 14 2000 364.0 364.0 27.0
LM2901PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0
LM2901PWRG4 TSSOP PW 14 2000 356.0 356.0 35.0
LM2901VQPWR TSSOP PW 14 2000 356.0 356.0 35.0
LM2901VQPWRG4 TSSOP PW 14 2000 356.0 356.0 35.0
LM339ADBR SSOP DB 14 2000 356.0 356.0 35.0
LM339ADR SOIC D 14 2500 364.0 364.0 27.0
LM339ADR SOIC D 14 2500 340.5 336.1 32.0
LM339ADRG4 SOIC D 14 2500 356.0 356.0 35.0
LM339ADRG4 SOIC D 14 2500 340.5 336.1 32.0
LM339ANSR SO NS 14 2000 356.0 356.0 35.0
LM339APWR TSSOP PW 14 2000 364.0 364.0 27.0
LM339APWR TSSOP PW 14 2000 356.0 356.0 35.0
LM339APWRG4 TSSOP PW 14 2000 356.0 356.0 35.0
LM339BIPWR TSSOP PW 14 3000 356.0 356.0 35.0
LM339DBR SSOP DB 14 2000 356.0 356.0 35.0
LM339DR SOIC D 14 2500 364.0 364.0 27.0
LM339DR SOIC D 14 2500 340.5 336.1 32.0
LM339DRG3 SOIC D 14 2500 333.2 345.9 28.6
LM339DRG3 SOIC D 14 2500 364.0 364.0 27.0
LM339DRG4 SOIC D 14 2500 356.0 356.0 35.0
LM339DRG4 SOIC D 14 2500 340.5 336.1 32.0
LM339NSR SO NS 14 2000 356.0 356.0 35.0
LM339PWR TSSOP PW 14 2000 356.0 356.0 35.0
LM339PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0
LM339PWRG4 TSSOP PW 14 2000 356.0 356.0 35.0
Pack Materials-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com 29-Jun-2023
TUBE
T - Tube
height L - Tube length
W - Tube
width
Pack Materials-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com 29-Jun-2023
Device Package Name Package Type Pins SPQ L (mm) W (mm) T (µm) B (mm)
LM339ADE4 D SOIC 14 50 507 8 3940 4.32
LM339ADG4 D SOIC 14 50 506.6 8 3940 4.32
LM339ADG4 D SOIC 14 50 507 8 3940 4.32
LM339AN N PDIP 14 25 506.1 9 600 5.4
LM339AN N PDIP 14 25 506 13.97 11230 4.32
LM339AN N PDIP 14 25 506 13.97 11230 4.32
LM339ANE4 N PDIP 14 25 506 13.97 11230 4.32
LM339ANE4 N PDIP 14 25 506.1 9 600 5.4
LM339ANE4 N PDIP 14 25 506 13.97 11230 4.32
LM339APW PW TSSOP 14 90 530 10.2 3600 3.5
LM339APWG4 PW TSSOP 14 90 530 10.2 3600 3.5
LM339D D SOIC 14 50 506.6 8 3940 4.32
LM339D D SOIC 14 50 507 8 3940 4.32
LM339DE4 D SOIC 14 50 506.6 8 3940 4.32
LM339DE4 D SOIC 14 50 507 8 3940 4.32
LM339DG4 D SOIC 14 50 507 8 3940 4.32
LM339DG4 D SOIC 14 50 506.6 8 3940 4.32
LM339N N PDIP 14 25 506.1 9 600 5.4
LM339N N PDIP 14 25 506 13.97 11230 4.32
LM339N N PDIP 14 25 506 13.97 11230 4.32
LM339NE3 N PDIP 14 25 506.1 9 600 5.4
LM339NE4 N PDIP 14 25 506 13.97 11230 4.32
LM339NE4 N PDIP 14 25 506 13.97 11230 4.32
LM339PW PW TSSOP 14 90 530 10.2 3600 3.5
LM339PWG4 PW TSSOP 14 90 530 10.2 3600 3.5
Pack Materials-Page 6
MECHANICAL DATA
0,38
0,65 0,15 M
0,22
28 15
0,25
0,09
5,60 8,20
5,00 7,40
Gage Plane
1 14 0,25
A 0°–ā8° 0,95
0,55
Seating Plane
PINS **
14 16 20 24 28 30 38
DIM
4040065 /E 12/01
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2023, Texas Instruments Incorporated