Professional Documents
Culture Documents
Equipment Preservation
Equipment Preservation
SCIPCO Equipment
Preservation
CUSTOMER
Shuweihat CMS International Power Company
(SCIPCO)
LOCATION
Abu Dhabi (Ruwais)
United Arab Emirates (UAE)
PROBLEM
SCIPCO had a huge inventory of unprotected equipment in their ware-
house. The warehouse is located close to the sea resulting in the equip-
ment rusting. The customer required a solution to protect their equip-
ment from corrosion while in storage.
APPLICATION
The large metal expansion joints were cleaned using VpCI®-422. Then
DATE VpCI®-337 was sprayed on the surface. VpCI®-132 foam pads were
May 2010 placed on the joints before being sealed using Milcorr® VpCI® Shrink
Film. The valves, actuators, shafts, and bearings were cleaned using
DISTRIBUTOR
VpCI®-414, sprayed with VpCI®-337, and sealed with Milcorr® VpCI®
The Kanoo Group
Shrink Film. Electrical panels and other electronic items were cleaned,
PRODUCTS and sprayed with ElectriCorr® VpCI®-238 and VpCI® -105 Emitters were
VpCI®-337 placed before complete assemblies were wrapped with VpCI® -126 Blue
VpCI®-105 Emitters film. Boiler Tubes were fogged with VpCI® -309 and ends covered with
ElectriCorr® VpCI®-238 Milcorr® VpCI® Shrink Film; the boiler tube boxes were also covered
VpCI®-422 with Milcorr® VpCI® Shrink Film.
VpCI®-414
VpCI®-126 Prior to preservation, the customer had to replace tarpaulin covers ev-
VpCI®-132 ery six months because of the heat and humidity that damaged them.
VpCI®-309 For the past three years no replacement has been required since being
MilCorr® VpCI® Shrink Film protected with Milcorr® VpCI® Shrink Film.
Page 2 of 2