Professional Documents
Culture Documents
TECS-CloveStorageV07.20.20.07UME One-Click Deployment and Configuration CloveStorage Guide - R1.4
TECS-CloveStorageV07.20.20.07UME One-Click Deployment and Configuration CloveStorage Guide - R1.4
TECS-CloveStorageV07.20.20.07UME One-Click Deployment and Configuration CloveStorage Guide - R1.4
TECS-CloveStorageV07.20.20.07UME Daisyseed3.0
One-click Deployment and Configuration
CloveStorage Cluster Guide
Legal Statement
Document Information
Contents
1. OVERVIEW..............................................................................................................................................5
2. DEPLOYMENT PREPARATIONS................................................................................................................5
3. DEPLOYMENT FLOW................................................................................................................................9
Docu
ment
Version No. Issued on Update Description
Versi
on
V07.20.20.07UME R1.0 2022-4 -21 New
Changed some Chinese pictures to English pictures.
V07.20.20.07UME R1.1 2022-5 -23
Adjusted the English format of some titles.
Delete the description of the Raid.conf file in the UME template
Modified the content of Section 2.3: Combined Paragraph 1 and
2, optimized the description of Section 4.
V07.20.20.07UME R1.2 2022-6-22 Modified the content of Section 4.1: Description of Optimized
raid configuration method
Added the content in Chapter 5.3: The default validity period of
the NM password can be changed to 10 years.
Added the content in Chapter 4.2: Enter the operating system
V07.20.20.07UME R1.3 2022-8-26
version in the host template.
V07.20.20.07UME R1.4 2022-9-15 Modifying the OS Version and daisy Version in the 2.1 Table
1. Overview
This document is intended to instruct the user to deploy the CloveStorage storage cluster in
daisyseed3.0 one-click mode.
2. Deployment Preparations
Storage version
TECS TECS-CloveStorageV07.20.20.07UME_VERSION.zip
Used for mirroring packages in hyper-
CloveStorage TECS-CloveStorageV07.20.20.07UME.img
convergence scenarios.
Mimosa-x86_64-7.4-030865-Manager-provider-
Daisy 19.40.10.28-0-dockerimage-installer-220512113000-
daisy52135-ZXTECS_V03.17.15.110438445.img TECS mirror package and third-party
ZXTECS_3rdparty_V03.17.15.110438445.bin packages
provider-3rdparty-19.40.10.28-0-dockerimage-
installer-220512113000.bin
inspector_v07.20.10.13_220316.bin (python2)
inspector_v07.20.10.13py3_220318.bin (python3) O&M inspector tools and corresponding
Tools cephcheck-2022-05-18.zip security reinforcement packages and
cephrepair-2022-05-18.zip preventive maintenance packages
cephsec-2022-05-18.zip
UME_Ceph_Install_Template.xlsx
UME_Templ UME_daisyseed.xlsx UME one-click deployment configuration
ate UME_TECS_Install_Template.xlsx file
UME_ZSTOR_ZMS_TEMPLATE.xls
NDS_daisyseed.xlsx
NDS_Templa NDS_Ceph_Install_Template.xlsx One-click NDS deployment configuration
te NDS_TECS_Install_Template.xlsx file
NDS_ZSTOR_ZMS_TEMPLATE.xls
nodes of the CloveStorage. The host does not provide the computing service. The TECS silent
installation template does not contain the host.
When deploying the CloveStorage with the daisyseed one click, the daisyseed needs to
configure the hardware of each node through the BMC network interface, install the OS of the
first node through the PXE network and start the control node VM. The network planes are
planned as follows:
3. Deployment Flow
The entire deployment is completed by the unified entrance of daisyseed. The user only needs
to plan the network and prepare the version package for the environment to be deployed before the
deployment, fill in the deployment configuration form as required and then import it into
daisyseed. All the subsequent operations are completed by daisyseed. The overall daisyseed
deployment flow is shown in the following figure:
The daisyseed completes the whole CloveStorage independent deployment process, from the
installation of the first node OS to the configuration of the CloveStorage.
This chapter describes the precautions for configuring the four Excel tables required for daisyseed
one-click deployment.
For the UME project, please unzip it.In the/UME_Template.zip file, fill in the following
configuration tables according to the UME_daisyseed.xlsx template requirements.
1) PXE Table Configuration
Item Value Comment
PXE Service Listen Address 88.88.1.8 IP address of the PXE server
Subnet Mask 255.255.255.0 PXE Server Subnet Mask
Start IP of the PXE server
Address Pool Start Address 88.88.1.9
address pool
End IP of the PXE Server
Address Pool End Address 88.88.1.20
Address Pool
2) Configure the Hardware table.
A.Enter the server BMC address, server type, and BMC user password (note that SSH user
password is also required for the 5300 G4/DELL-R740xd server).
B. Raid Configuration method of the ZTE Server refer to Appendix 1 5300 G4X RAID
configuration (Note that the name of the generated *.conf file cannot be modified),Other servers
need to be configured with RAID manually. In addition, BIOS configuration method of
R5300G4X server refer to Appendix 2 5300 G4X BIOS configuration.
The following uses the configuration of three RAID methods as an example(The following
*.conf needs to be changed to the actual file name):
The first RAID configuration: Copy UME_daisyseed.xlsx as UME_daisyseed-01.xlsx, fill in
the first RAID mode in the *.conf configuration file, and fill in the *.conf in the RAID File
column of the server that needs to perform the first RAID in the Hardware table. Daisyseed should
run with UME_daisyseed-01.xlsx first.
Second RAID configuration: Copy UME_daisyseed-01.xlsx into UME_daisyseed-02.xlsx,
and fill in the second RAID mode in the *.conf configuration file. Fill in *.conf in the RAID File
column of the server that needs to perform the second RAID in the Hardware table. Then, run
daisyseed again with UME_daisyseed-02.xlsx.
Third RAID configuration: Finally, modify the configuration file *.conf to the third RAID.
Fill in *.conf in the RAID File column of the server where the third RAID needs to be performed
in the Hardware table of UME_daisyseed.xlsx. Then, use UME_daisyseed.xlsx to run the formal
deployment flow.
C. SNMP Community needs to be configured for OS and VM installation, It is usually set to
zte_public (depending on the server configuration, if you are not sure, please log in to the BMC
and check it).
3) Host and VM Configuration table configuration
Deploy Target: OS+vm indicates installing and deploying the Tecs control node, and
installing the operating system and starting the control node VMs. Os indicates installing only the
operating system, while daisyseed only needs to install the first node OS+VM. The operating
systems of other nodes do not need to be installed with daisyseed. They will be installed with
daisy in the future. However, the first three items of information shall be provided to daisy for
discovering the host and modifying the host name.
Installation disk: Enter KVM to check which drive is the installation disk identified by the
system.
VM Name: Name of the control node
VM RAM: Deploy the memory size of the control node
VM vCPU Number: Number of cores used to deploy the control node
Node Type: Add the table. For the control node, fill in controller_node. For other nodes, leave
it blank.
TECS: That is, TECS in Table 2.1. Other configurations remain unchanged by default.
2) Cluster Network Planning
Currently, only the management plane (MANAGEMENT), PUBLICAPI plane and
TECSClient plane need to be deployed for the silent installation of the tecs.
3) Host Template
The controller node template is provided for the host instantiation table. You can select the
correct node type, network interface name, mapped network plane name, OS version, and system
disk as required.
Note: The OS version in the above table must be filled in. Otherwise, the CloveStorage OS
version of UME Web will be null.
4) Host Instantiation Table
Fill in only the TECS control node VM (do not fill in the host information). The IP addresses
of the Management and TECSClient planes are consistent with VM IP in the Network
Configuration table of UME_daisyseed.xlsx.
configuration
Fill in the host template as planned for the host instantiation table. Fill in the node type,
network interface name, network interface members, network plane, system disk, and
management disk information and size as required.
5) Host Instantiation
The host name of CloveStorage should be consistent with that in the Host and VM
Configuration table of UME_daisyseed.xlsx. When the CloveStorage resource node and the tecs
host are deployed together, the IP addresses of the MANAGEMENT and TECSClient planes in
the CloveStorage cluster should be consistent with those of the Host IP planes in the Network
Configuration table of UME_daisyseed.xlsx.
associated.
After the four tables of one-click deployment are filled in, you can refer to the relationships of the
four tables in the following figure to check whether the table configuration is correct.
Select Common Mode, and click Use, see the following figure.
Select Installation Deployment. The Installation Deployment page is displayed, see the
following figure.
Click OK. The one-click installation progress page is displayed, see the following figure.
Note:
1. If any failure occurs in the above steps, click Retry to continue the deployment. If manual
intervention is required, contact the R&D team for online support.
2. When running to ceph_silence_install, if the following error occurs, please click Retry to
3、If the deployment cannot continue, click Force Stop to cancel the deployment.
Use the TECSClient floating IP to log in to the CloveStorage Web (https://{IP}: 34100). The
default password is admin/admin. To enter the Web system, you need to modify the default
password first. After modifying the password, log in to the Web again. You can change the
validity period of the Web password to 10 years in the security policy of "admin" -> "System" ->
"Strategy" > "Strategyin" of the Web.
Execute reboot to restart the node where the RAID card is being upgraded.
https://server.zte.com.cn/index.php?example=tools&method=list&aid=717&id=59
2. After the tool is downloaded, unzip it and install the tool package. The
installation tool has requirements for the browser used. The version of the
Superuser9!.
4. Enter the username and password, see the following figure. Click Next.
6. Click < span > Deploy --- PXE </span > to perform batch configuration.
follows:
11. Click Add to add a logical disk. The following figure shows the
configuration information.
14. Click Export, and select the path to be exported. Click OK, see the
following figure.
15. Manually select a path for storing the exported configuration file: The
generated file is automatically stored in the Config folder. The generated raid
Set the bios of the server. Similar to V9200, this server only supports
Open PXE Boot capalility: Click this option to select UEFI: IPV4
Descriptions
5 IO error
22 Invalid parameter
61 No data is available.
400 The request has a syntax error or does not support the request.
2001 There is no available data placement rule # Create a data placement rule first
2003 The storage pool name already exists # Please enter again
2004 Data placement rule does not exist # Refresh the page
2005 The number of PGP s cannot be greater than the number of PGs.
2006 The number of modified PGP instances must be greater than the current
number.
2007 The number of modified PGs must be greater than the current number.
2008 The number of PGs cannot exceed the maximum number allowed by the
system.
2009 The minimum number of copies cannot be greater than the current number of
copies.
3003 This cluster already exists # Confirm it before performing the operation.
10007 Server not managed # Confirm the operation before the operation.
10008 The heartbeat link between the management server and the storage cluster is
10012 The server is not unique in the cluster # Contact ZTE technical support.
10018 Failed to configure the file storage cluster # Make sure that the NIC information
10020 Storage pool: The current data backup specification of '{1}' is '{2}', and hard
10021 Hard disk: {0} has been isolated, so isolation is not allowed.
10022 Hard disk: {0} has not been added to the storage pool. Data migration is not
allowed.
10023 Hard disk: {0} is being isolated, and it is not allowed to perform relevant
operations.
10024 Hard disk: The {0} is being activated, and it is not allowed to perform related
operations.
10025 Hard disk: The {0} is being deleted. The related operations are not allowed to
be performed.
10026 Hard disk: {0} has data, and the deletion operation is not allowed.
10027 Hard disk: The {0} is being used, and the activation operation is not allowed.
10028 Hard disk: {0} is being isolated. Hard disk: {1} is not allowed to perform the
isolation operation.
10029 Hard disk: {0} is activated. Hard disk: {1} is not allowed to perform isolation.
10030 Storage pool: {0} is full. Hard disk: {1} is not allowed to disable or isolate {0}.
For storage pool: {0} is allowed to expand first, and then hard disk: {1} is
10031 Storage pool: {0} is in recovery or downgrade status. Hard disk: {1} is not
10032 Timeout occurs when the storage pool is in normal status # Check whether the
10033 Too many failures, user locked # Please {0} and try again
10036 The account is locked by the system. # Contact the system administrator to
10037 Hard disk: {0} is being enabled, and related operations are not allowed to be
performed.
10038 Hard disk: {0} is in the process of suspension. It is not allowed to perform
relevant operations.
10039 Host: {0} timed out while deleting from the topology structure. Please check
10040 Host: {0} failed to delete from the topology structure. Please check whether
10041 '{0}' syntax is incorrect. Please check whether the format is correct.
10042 Failed to inject the configuration parameters. Please try again later.
10043 Hard disk: The number of data backups on the {0} is smaller than the backup
10044 Other tasks are being executed on the current server. Please try again later.
10046 Storage pool: The current data backup specification of '{1}' is '{2}', and the
hard disk: '{0}' does not allow the suspension operation # Migrate the data out
10047 The host has the {0} service. The deletion is not allowed # Please stop the
service first
10048 Input parameters are not changed # Modify parameters and try again
10050 File storage cluster configuration failed # The storage service is not deployed
10051 There is a deployment task being executed # Please try again later
10055 {0}: Must be an integer between {1} and {2} or any value from {3}.
10057 Hard disk: {0} is being isolated. Hard disk: {1} is not allowed to disable.
10058 Hard disk: {0} is out of service. Hard disk: {1} is not allowed to execute out of
service.
10203 The DSM does not support recollection of {0} data # Currently, only PM and
10506 After the task is finished, the storage pool is not found {0}
10508 The OSD status is Down, and the Up operation is not allowed.
20002 Failed to query historical alarms # Check whether the management system is
normal.
41000 Mapping group {0} does not exist # Please refresh the page
41003 Client {0} is not in the mapping group # Please refresh the page
41004 Client {0} is already in the mapping group # Please enter again
41008 The gateway {0} is already in the mapping group # Do not add it again
41009 Gateway {0} is not in the mapping group # Please refresh the page
41100 Storage pool {0} does not exist # Please refresh the page
41101 The volume {0} does not exist # Please refresh the page
41104 The volume capacity should be between 64 M-64T # Please enter again
41106 The block size should be between 4K-32 M # Please enter again
41111 The volume is in the mapping group # Please move the volume out of the
41112 Rename is not allowed. The volume is in the mapping group # Please move the
41114 Snapshot associated with the volume # Delete the snapshot associated with the
volume
41115 Invalid volume operation # Check whether the parameters are correct.
41116 Failed to query the volume information of the storage pool # Please try again
later
41117 Snapshot associated with the volume # Delete the snapshot associated with the
volume
41119 The reserved IOPS and IO priority cannot be set to 0# at the same time. Please
re-enter.
41120 The reserved IOPS cannot exceed the upper limit IOPS# please re-enter IOPS#
41121 The acquisition of used volume capacity times out # Please try again later
41124 The storage pool {0} is in the protection state, no operation is allowed.
41125 The QoS parameter value cannot be smaller than -1 # Please enter again
41151 Invalid snapshot operation # Check whether the parameters are correct.
41152 Snapshot {0} does not exist # Please refresh the page
41156 Snapshot {0} associated non-independent clone volume exists # Please perform
41200 Client {0} does not exist # Please refresh the page
41209 IQN {0} does not exist # Please refresh the page
41302 The server {0} service does not exist # Please refresh the page
41307 The incoming authentication switch is not turned on, so the outgoing
41310 The outbound password cannot be the same as the inbound password.
41400 The SCSI metadata pool does not exist # Please specify the SCSI metadata pool
41403 The SCSI metadata pool does not exist # Refresh the page
41404 SCSI metadata pool being migrated # Please try again later
41405 The destination storage pool does not exist # Refresh the page
41407 Gateway server is insufficient. To avoid single point of failure, at least {0}
41408 Gateway server is insufficient. At least {0} gateway servers are required. Please
41409 The remaining gateway servers are insufficient, and LUNs exist in this mapping
group. To avoid single point of failure, at least {0} gateway servers are required
41410 The remaining gateway servers are insufficient. There are LUNs in this
mapping group. At least {0} gateway servers are required # Please remove the
41411 Volume {0} has joined the mapping group # Please select another volume
41412 Gateway server {0} joined into the mapping group # Please remove these
41413 The mapping group is executing a task # Please try again later
41414 Task execution of the mapping group fails # Contact ZTE technical support
41415 This iSCSI high availability group is in use. Do not delete this group. # Please
remove this high availability group from the mapping group first.
41416 There is a mapping group. The mapping group cannot be set. # Delete the
41420 Existing gateway servers under rack {0} are added into other HA groups.
41424 At least one gateway server is required for the high-availability group.
41426 The high-availability group is being operated. # Please try again later.
41427 High-availability group {0} is already in the mapping group # Do not add it
again
41428 High-availability group {0} is not in the mapping group # Please refresh the
page
41429 The remaining high availability group is insufficient, and LUNs exist in this
mapping group. To avoid single point of failure, at least {0} high availability
41430 The remaining high availability groups are insufficient. There are LUNs in this
mapping group. At least {0} high availability groups are required. Please
41431 High availability groups are insufficient. To avoid single point of failure, at
least {0} high availability groups are required. Please add high availability
groups first.
41432 The high-availability group is insufficient, and at least {0} high availability
41434 This operation is forbidden because the high availability group is not enabled.
41436 Gateway server {0} added to other high availability groups # Please select
41437 Gateway server {0} has been added to the iSCSI high availability group #
Please remove these gateway servers from the high availability group first
41438 The gateway server is being operated. # Please try again later.
41440 The mapping group is being operated. # Please try again later.
41500 The storage pool mirroring mode is pool mode # Please modify the storage pool
41501 The storage pool mirroring mode is disabled # Please modify the storage pool
41502 The volume mirror status is disabled # Modify the volume mirror status first
41503 Volume as the active role # Please degrade the image first
41505 The storage pool mirroring mode is disabled # Please modify the storage pool
41507 There are volumes with the slave role in the storage pool.
41509 The volume mirror status is enabled # Please disable the volume mirror status
first
41510 Invalid image operation # Check whether the parameters are correct.
41513 There is a volume whose mirror status is enabled in the storage pool # Please
51002 Insufficient user permission # Ensure that the user has the operation permission,
51004 Failed to log in to the server without password # Try to repair the server without
password
51005 Server password-free failure # Check whether the SSH software of the
51006 Server password-free failure # Check whether the SSH software of the
51008 Server password-free failure # Check whether the SSH software of the
51009 Insufficient user permission # Ensure that the user has the operation permission,
51012 Software package download failure # Check whether the software package path
is correct.
51019 Failed to restore the YUM source file # Contact ZTE technical support
51024 The management server is not configured with an IP address in the same
51071 The hard disk has user data. # Are you sure you want to format the hard disk?
51079 Start OSD service is not started #OSD service is started one by one. Please wait
patiently.
51080 Hard disk addition timed out. # Contact ZTE technical support.
Management page.
51087 Server not in the cluster # Please upgrade the server in the home cluster.
51089 The version number of the selected upgrade installation package is lower than
51090 Some servers are not configured with IP addresses in the management network
segment.
51100 The floating IP address fails to be modified # Contact ZTE technical support.
51108 The server is not configured with the IP address of the correct cluster network
segment {0}.
51113 The uninstallation operation is not performed, and the pre-operation fails.
correct.
51125 The user has no operation permission over the destination path.
51127 MON service enabled timeout # Check whether the server system time is
51131 Timeout
51134 Failed to read the configuration file template # Contact ZTE to re-obtain the
version
51135 Upgrade not started: The {0} node upgrade fails # Please solve the {0} node
51137 The startup operation is not started, and the pre-operation fails.
51138 The deactivation operation is not started, and the pre-operation fails.
51140 Failed to upgrade the Agent because the management software is being
51141 System detection timed out before deployment. Please refresh the page and try
again later.
51144 The AGENT configuration file does not exist # Retry later
51146 Failure to turn off the data balance switch: For {0}#, please contact ZTE
technical support.
51147 Failure to turn on the data balance switch: For {0}#, please contact ZTE
technical support.
51148 The server is not configured with a correct cluster network and cannot be
51149 Server public network configuration error # Check the network configuration to
51150 Server cluster network configuration error # Check the network configuration
51151 The public network address of the server does not match that of the public
51152 The server cluster network does not match the cluster network address # Enter
51153 Server network configuration error # Enter the correct network configuration
51154 The public network of the cluster does not support mixing IPV4 and IPV6 #
51155 The cluster network does not support mixing IPV4 and IPV6 # Please select the
51156 Server not bound to {0} network # Configure the {0} network for the server on
51157 The {0} network bound to the server has expired # Reconfigure the {0}
51158 The storage service has been deployed on the server, and the public network
51159 Hard disks are deployed on the server. The cluster network cannot be modified.
52012 The current version cannot be upgraded to the major version: {0}
52013 Abnormal service exists in the cluster: {0}#. Please restore this service first.
52015 Abnormal service exists in the cluster: {0}#. Please restore this service first.
52016 Abnormal service exists in the cluster: {0}#. Please restore this service first.
52022 The hard disk exists in the system partition # If it is not used any more, format
it manually.
52023 The hard disk is a multi-path disk. # If it is not used any more, format it
manually.
52024 A logical volume exists on the hard disk. # If it is not used any more, format it
manually.
52025 The hard disk has been used as a cache disk. # If it is not used any more, format
it manually.
52026 The hard disk has been added to the cluster. # If it is not used any more, format
it manually.
52027 User data exists on the hard disk. If the user data is not used any more, format it
manually.
52028 User data exists on the hard disk. If the user data is not used any more, format it
manually.
52030 Failed to allocate cache disk space # The hard disk is occupied.
52056 Failed to query the MON service status # Check whether the MON service is
normal.
52057 Installation software package {0} failure # Check whether the software package
path is correct.
52058 Failed to query the software package {0} # Check whether the path of the
52059 Query the software package {0} failure # Check whether the software package
52062 Querying the {0} service version of the cluster fails # Please check whether the
52063 Failed to query basic cluster information # Check whether the cluster status is
normal.
52091 Failed to upgrade hard disk: Stop encrypted device {0} failed
52092 Failed to upgrade hard disk: Failed to activate hard disk {0}
52094 It is forbidden to stop the MON service. You must ensure that more than half of
52095 Failed to upgrade ZCACHE, hard disk OSD.{0}Failed to unmount the file to
52105 The cache pool is being synchronized # Please try again later
52106 The cache pool is being synchronized # Please try again later
52107 The cache pool is being synchronized # Please try again later
52108 Cache pool being degraded # Please operate the online cache disk.
52110 Pool: The {0} status is abnormal, and the replacement cache disk is not secure.
52111 Pool: {0} does not have enough copies, so replacing the cache disk is unsafe.
52121 The cache disk does not exist # Check the cache disk
52128 The cache pool is unavailable # Rebuild the cache pool after deleting it.
52129 The server {0} package {1} is not installed # Please install the package
manually
52130 The cache pool is not ready after the server is powered on. # Retry later.
52131 The cache disk ID is the same as that of another cache disk. Do not replace it. #
52132 Failed to obtain the available area number # Please try again later
52134 The device is not a piece of device # Contact ZTE technical support
52138 Junk data may exist on this node. Please check and clear it first.
52141 Failed to unmount the mounted hard disk # Please try again later
52142 A timeout occurred when the cache disk was stopped on a device. # Please try
again later.
52147 Hard disk startup timed out # Please try again later
52148 Lost hard disk startup rule file # Contact ZTE technical support.
52151 Timeout of registering a cache disk-related device # Please try again later
52155 Failed to configure and enable the iSCSI high-availability service # Contact
52156 The iSCSI high-availability service fails to be stopped # Contact ZTE technical
support
52157 Failed to create the zstor user # Contact ZTE technical support
53003 The gateway exists under the NAS instance '{0}' and cannot be deleted.
53004 There is no available gateway under the NAS instance '{0}', so the operation
cannot be performed.
53005 The file system has an NAS instance, which cannot be deleted.
53006 The NAS instance does not access the LDAP domain.
53015 The load balancing function is enabled for the NAS instance.
53016 The NAS instance does not enable the CIFS service.
53017 The FTP service is not enabled for the NAS instance.
53018 The NFS service is not enabled for the NAS instance.
53019 Batch operations are only applicable to the same NAS instance.
53020 The CIFS shared directory of the NAS instance already exists. It cannot be
53021 The NAS instance already exists the CIFS shared directory. It cannot be added
53022 The NAS instance already exists an FTP shared directory, and cannot be added
53023 The NAS instance already exists a CIFS shared directory managed by the
53024 The NAS instance already exists a CIFS shared directory managed by the AD
53026 The NAS instance is not added to the LDAP domain, and thus the user cannot
log out.
53027 The NAS instance is not added to this AD, so you cannot exit.
53028 The service of the gateway node '{0}' '{1}' is not healthy.
53030 The NAS instance has been configured with a shared CIFS directory, so
53031 The shared FTP directory of the NAS instance is already configured, and
53032 The {0} shared directory has been configured for the NAS instance, so all
53033 The NAS instance fails to read the {0} configuration file.
53034 The current version only supports the creation of one NAS instance.
53054 The gateway node does not have the "{0}" service.
53105 The number of networks in the virtual IP group is smaller than the number of
53205 The primary DNS node does not exist, and the operation domain is not allowed.
53262 The user exists in the local user group and cannot be deleted.
53403 The default protection period of the shared directory must be later than the
53404 The default protection period of the shared directory must be less than or equal
53405 The permission of the shared directory should be between 000 ~ and 777.
53452 The NFS export directory does not restrict the existence of the client {0}.
53453 The NFS export directory does not restrict the existence of the client's {0}.
53503 The {0} user permission of the CIFS export directory already exists.
53552 The user {0} permission of the FTP export directory does not exist.
53554 The shared directory of the existing FTP uses the {0} authentication.
53555 There are user permissions under the FTP export directory.
54002 Only the versions whose version numbers start with 10 are supported.
70003 The current user is a system administrator and cannot be configured with
permissions.
70004 The current user is a system administrator and is not allowed to perform cluster
70005 A new user fails to be created. # Check whether the parameters are correct.
70006 The user is created successfully, but the permission configuration fails.
Configuration Fails
70010 Failed to modify the user password # Check whether the parameters are correct
70013 The user does not exist # Please refresh the page
70014 Do not set the same password within {0} times of modification.
70016 The user name is limited by the system. Please enter another user name.
74001 The size of the license file exceeds the limit (2M) # Apply for a new license.
74002 Failed to check the license file # Apply for a new license.
74003 The license file has been bound and used # Apply for a new license.
74004 This function is not authorized # Import the license file authorized by this
function.
74008 File format error # Please import the extension name.LCS or .lcs license file
74010 Failed to check the license file # Apply for a new license.
74011 This function is not authorized # Import the license file authorized by this
function.
75201 SNMP user creation failure # Check whether the parameters are correct.
75202 The SNMP user fails to be modified. # Check whether the parameters are
correct.
75206 The specified security level is not supported # Please enter again
75207 The specified authentication mode is not supported # Please enter again
75208 The specified encryption mode is not supported # Please enter again
75301 SNMP TRAP rule creation failure # Please check whether the parameters are
correct.
75302 SNMP TRAP rule modification failed # Please check whether the parameters
are correct.
76001 The host cache pool information fails to be queried # Retry again later.
76004 The cache pool name already exists # Please enter again
76006 The cache pool fails to be created. # Check whether the hard disk is available.
76007 The cache pool configuration fails to be updated # Try to update the cache pool
again later.
76008 The cache configuration fails to be updated # Try to update the configuration
again later.
76009 Cache pool deletion failed # Try to delete the cache pool again later.
76010 Insufficient cache pool space # Use a large-capacity disk to recreate a cache
pool
76013 The cluster is replacing other cache disks. Please try again later.
76015 Disk {0} space is insufficient # Please select large-capacity disk or use other
76017 Cannot replace the cache disk in the unavailable cache pool # Replace the cache
76019 The cache disk is offline # Replace the offline cache disk first to restore the
cache pool.
76021 Insufficient cache ratio # Modify the cache pool configuration and recreate it.
76022 The cache pool cannot be created because there is no HDD hard disk.
77003 This operation does not exist # Refresh it and try again.
77004 Operation object {0} executing task # Please try again later
View the
"javascript:
Index.goSyste
mPageMenu(\''l
ogcommon\'');
"> Operation
log </a>
</b> page
77101 The last collection task is not finished. Please try again later.
78001 The current cluster is not in cluster maintenance mode # Refresh the page
78003 The current cluster is in cluster maintenance mode # Refresh the page
80044 Waiting
80071 Waiting for the completion of the upgrade of the peer node of HA
80079 Restarting
90011 Server '{0}' is not in the rack # Please refresh the page
90012 Server '{0}' is located in another rack '{1}' # Please refresh the page
90013 The rack '{0}' does not exist # Please refresh the page
90014 The rack name already exists # Enter the rack name again
90015 There is a server under the rack # Remove the server first
90027 There are volumes added to the mapping group in the storage pool # Remove
90029 Server {0} does not exist # Please refresh the page
90030 The storage pool name is already used # Please enter again
90033 Hard disk '{0}' does not exist # Please refresh the page
90035 Select a device that bears the data of the corresponding storage pool, or select
90036 The specified storage pool group does not exist # Select an existing storage
pool group
90037 The current status of the specified storage pool group is exclusive # Select a
90038 The number of multi-copy policy copies should be a positive integer not greater
90039 The erasure code policy should be '4+2' or '2+1'#. Please re-enter it.
90040 Storage pool '{0}' does not exist # Please refresh the page
90041 The storage pool '{0}' is created externally. It cannot be configured as a shared
90043 Storage pool '{0}' created based on other storage pools, hard disk distribution is
90044 Hard disk '{0}' does not exist # Please refresh the page
90045 The hard disk '{0}' has been used by other storage pools.
90046 The specifications of the erasure code storage pool cannot be modified.
90047 Failed to obtain the security policy for the storage pool.
90050 Select the server that has at least the same number of copies as {0}, or specify a
90051 Select a rack that has at least the same quantity as the specified number of
copies {0}, or specify a data backup mode for the corresponding storage pool.
90052 Select a hard disk that has at least the same number of copies as {0}, or specify
90053 Creation failure. Each shared storage pool group contains a maximum of '{0}'
storage pools.
90054 The selected hard disk '{0}' has been used by the storage pool group '{1}'
90055 There are volumes in the storage pool. Please delete the volumes first.
90059 Creation failed. A storage pool is being created. The shared storage pool group
90060 The storage pool '{0}' is in the unhealthy status # Please handle the related
alarms first
90061 Failed to create. The rack name cannot be the same as the host name.
90062 Failed to create. The rack name cannot be the same as the storage pool name.
90063 Failed to create. The rack name cannot be the same as the hard disk name.
90064 Server {0} is a member gateway server of the iSCSI HA group # Please remove
91002 The floating IP address is incorrect # Enter an IP address that is in the same
91006 Failed to configure the active/standby cluster mode # Please try again later
91007 Incorrect heartbeat link configuration # Check whether the heartbeat link
configuration is correct.
91009 There is a task in progress for the HA cluster # Try it again later
91010 The system does not operate in active/standby HA mode # Configure the
91011 The standby node of the HA cluster is offline and cannot be switched over.
91012 The standby node of the HA cluster cannot be switched because it is in inactive
status.
91013 The standby node of the HA cluster is abnormal and cannot be switched over.
91015 The shared device in the HA cluster is in abnormal status and cannot be
switched.
91016 Data cannot be switched during data synchronization of the HA cluster shared
device.
91018 The HA cluster does not have this maintenance network address.
91052 Failed to format the shared block device # Check whether the shared block
91069 Incorrect configuration of shared block device # The shared block device must
91071 Failed to disable the shared block device # Please try again later
91072 Failed to create metadata for the shared block device # Try it again later.
91073 Failed to enable the shared block device # Try it again later.
91074 Failed to get online on the peer node # Please try again later
91075 The shared block device does not exist # Check whether the shared block
91076 The shared block device is used # Check whether the shared block device
configuration is correct.
91078 The network ports corresponding to the local node management network of the
HA cluster are different from those of the peer node management network #
91081 Insufficient user permission # Make sure that the user connected to the peer
node has the operation permission, or contact the system administrator to grant
91082 The local node management software is not installed properly or the installation
91083 The management software of the peer node is not installed properly or is not
91085 Failed to obtain the local user information # Ensure that the local user name is
correct.
91088 Failed to modify the HA maintenance IP. # Contact ZTE technical support.
91089 Failed to delete the HA maintenance IP. # Contact ZTE technical support.
91093 Failed to repair the shared block device # Contact ZTE technical support.
91094 The remote node Nginx fails to bind the interception IP address # Contact ZTE
technical support
91095 Nginx listening port binding IP address failed # Contact ZTE technical support
91096 Failed to reload the Nginx configuration file # Check whether the configuration
92009 The supported backend types are: "cinder," "nova," "glance" and
"cinder_backup."
92022 The Glance user does not exist. Please create the Glance user first.
92023 Failed to upload the file. Please confirm that the file is normal and try again.
92026 Nova back-end storage pool without '{0}' # Please add the storage pool as Nova
back-end.
92027 Tecs alias '{0}' has been used # Please use another name
92028 The length of the Ceph AES private key must be 128192256 bits.
92029 Coding failed. Please make sure that the file '{0}' and coding '{1}' are correct.
92102 Application '{0}' exists in the user # Please delete the user first or choose to
92105 The Ceph user '{0}' has been used by other applications.
100001 Failed to obtain the FTP user # Please try again later
100002 Failed to modify the FTP user. # Try to modify the FTP user again later.
100003 Failed to delete the FTP user # Try to delete the FTP user again later.
100006 Failed to add an FTP user. # Try to add an FTP user later.
100102 The file system does not exist # Refresh the page
100103 The storage pool {0} has been used # Please enter again
100104 The MDS service is running # Disable the MDS service first
100105 The MDS service is disabled # Enable the MDS service first
100108 There is an NAS instance in the file system # Delete the NAS instance first
100109 Only one file system can be created in the current version.
100207 The versions of the same version number must be deleted at the same time.
100208 The version fails to be uploaded, and a patch version cannot be uploaded
directly.
100213 The management system is not of the latest version. Please upgrade the
100301 Certificate file not supported. Select a certificate of the PEM type.
100302 Unsupported private key file. Select a private key file of the PEM type.
100304 Failed to upload the certificate file. Please try again later.
100305 Failed to upload the private key file. Please try again later.
100306 The certificate does not match the private key. Select the certificate and private
100307 Only the certificate of the RSA type is supported. Select a proper certificate file.
100308 Only a key of the RSA type is supported. Select a proper key file.
100309 The imported certificate is the same as that used by the server. Please select a
100310 Certificate check failed. Please ensure that the certificate is complete and
available.
100311 The server is using the default certificate and does not need to be reset.
100312 Failed to reset the default certificate. Ensure that the default certificate and
100314 To enable two-way authentication, you must upload the root certificate of the
client.
100315 Ca certificates and private key files must be uploaded at the same time.
100322 The certificate revocation list does not match the root certificate. Select the
100404 The version of the backup and restoration file is different from the current
version.
100413 Failed to connect to the backup server # Check whether the server IP or port is
correct
100414 Failed to log in to the backup server # Check whether the username or
100416 The upload path of the backup server is incorrect # Check whether the user has
100422 Service start failure # Please check whether port {0} is occupied
100602 Failed to configure the whitelist # Check whether the parameters are correct.
100700 The client network operation failed # Contact ZTE technical support.
111001 Timeout
115506 Failed to View the Status of the Node Adding to the LDAP Domain
116504 No permissions.
116533 Failure to trigger the WORM file to enter the protection status