Professional Documents
Culture Documents
RVT Structured Packings P en WEB 20220809
RVT Structured Packings P en WEB 20220809
RVT Structured Packings P en WEB 20220809
Corrugated sheet
structured packing
made of PTFE
Corrugated sheet
structured packing
made of PP
Corrugated sheet
metal structured packing
2 3
RMP The typical application fields for met-
al structured packings are processes
Distillation performances of several RMP N packing types have been measured at the
Separation Research Program ( SRP ) under a wide range of operating conditions and pressures.
Following diagrams show the distillation performance results
of the most commonly used structured packings RMP N 250Y.
0,2 0,1
0 0,01
0 0,5 1 1,5 2 2,5 3 3,5 4 0,1 1 10
Gasfactor FG / ( m/s ) ( kg/m3 ) 0.5
4 5
RPP Hiflow® PLUS Structured Packings
RVT Plastic Structured Lattice plastic for Special
Packings structured packing Process Conditions
The RPP structured packing line is RVT‘s family
Application Fields
of corrugated sheet structured packings made
of thermoplastics. The conventional, N and high Typical applications for Hiflow® PLUS
capacity, S packing geometries as described for are flue gas scrubbers, strippers
the metal structured packings are also available ( e. g. chlorinated hydrocarbons ),
For applications with particular operating
in the RPP line. pre-coolers in air separation plants
conditions, RVT Process Equipment offers
or amine scrubbers for CO2 separation
The RPP packings are available in PE, PP and PVDF structured packings made of highly resistant
from flue gases as well as heat
( others on request ). plastics such as PTFE.
recovery scrubbers.
Typical applications are HCI absorbers,
In some of these applications, the gas SO2 absorbers as well as extraction
RPP N Specific flows to be treated have attained processes with operating temperatures
surface area increasingly large throughput volumes, up to a maximum of 130 °C.
Packing size m2 /m3 such as in CCS or SO2 separation
processes from flue gases by means
250 Y 250 of scrubbing. This leads to even
greater column diameters and there-
RPP S Specific -fore to high investment costs. Here,
surface area Hiflow® PLUS packing offers distinct
Packing size m2 /m3 Hiflow® PLUS is a product that com- advantages as the column diameter
bines the advantages of random and the pressure drop can be
250 250 tower packing and conventional reduced without significantly affecting
structured packings while reducing the mass transfer efficiency.
Packings with other specific surfaces the limitations of these two mass
The main performance characteristics
are also available on request transfer components.
and advantages of Hiflow® PLUS are:
This lattice structured packing type
lower pressure drop than random
is particularly suitable for applica-
tower packing
tions that require high capacities at Structured packing made of PTFE
high liquid loads. improved cross flow compared in corrugated sheet structure,
to conventional structured packings spec. surface area 300 m2/m3
The development of Hiflow® PLUS ( packings with other specific surface
was inspired by the Hiflow® ring, economic production due to areas available on request )
which has a long and successful his- reduced raw material requirement
tory with industrial applications.
no wall wipers required
Ceramic structured packings are
Specific easy installation and installable mainly used for even higher temperatures
Hiflow® PLUS
surface area in a horizontal or vertical column, and corrosive process conditions.
m2 /m3 consequently reducing packing RVT Process Equipment offers
Packing type
transportation costs and installation conventional ceramic structured packings
180
# 1 time and cost at jobsite, in both X ( 60° ) and Y ( 45° ) corrugation
100 angles as well as with specific surface
# 2 standard liquid distributor
80 areas from 125 to 450 m2/m3.
# 3 as designed for random packing
can be used
Available raw materials:
RPP N structured packing type PP, PE, PPH, others on request. significantly improved resistance
against fouling in comparison
to conventional structured packings
7 9
RVT Process Equipment GmbH
Range of products The way to
RVT Process Equipment
Saalfeld
Erfurt
Kassel / r
nach
ig
Suh
e
Hannov
/ Leipz
B 85
B 19
Eise
Fulda A 73 B4 A9
Berlin
Meiningen Ludwigs-
Structured packings for stadt
B 89
mass and heat transfer Loben-
stein
Eisfeld
Hof
Bad Marktrodach Naila
Neustadt B 279 Coburg B 173 Exit
a.d.Saale Kronach
B4
Naila
Column internals A7 B 303 Lichtenfels
B 85
Staffelstein B 303 Bad
B 173
Schweinfurt B 303
B 279
Kulmbach Berneck
A 73
A 70
A 70
Exit
Bad
Exit Werneck Bayreuth Berneck
Schweinf.
Mass transfer trays Werneck Bamberg Intersection
Bamberg A9
Würzburg
B 505
A3 Pegnitz
Frankfurt/Köln A 73
Intersection
Biebelried
Biological A3
Erlangen B 85
carrier media
A7
A9
B 470
Fürth
Nürnberg A6
ns
ar
bu
tg
rg
ut
St
www.rvtpe.com