Professional Documents
Culture Documents
Cyclone Design Calculation Tool Simplified
Cyclone Design Calculation Tool Simplified
Cyclone Design Calculation Tool Simplified
FOR EDUCATIONAL PURPOSE ONLY – DO NOT USE THIS METHOD FOR DETAIL DESIGN – ALWAYS CONSULT A RE
Page 1
Cyclone calculation tool
Page 2
Cyclone calculation tool
Copyright www.PowderProcess.net
The content of PowderProcess.net is copyrighted but no warranty nor liability is ensured. The content of this site is to be seen as a help and important information and calc
quality procedure of his organization or by checking another source. The user must always respect all applicable regulation. The use of the information is at th
FOR EDUCATIONAL PURPOSE ONLY – DO NOT USE THIS METHOD FOR DETAIL DESIGN – ALWAYS CONSULT A RE
Page 3
Cyclone calculation tool
ALWAYS CONSULT A REPUTABLE SUPPLIER FOR DETAIL DESIGN
Control panel
Cyclone diameter Dc (m)
m
Please modify the cyclone diameter until cut off diameter reaches target and low pressure drop
Cut off diameter (microns)
microns
Pressure drop
Pa
Chosen geometry
Dimensions Copy paste the standard geometry chosen from the table above
Hc/Dc = KH 0.5
Bc/Dc = KB 0.2
Sc/Dc = KS 0.5
Di/Dc = Ki 0.5
Lc/Dc = KL 1.5
Zc/Dc = KZ 2.5
DS/Dc = KD 0.375
Estimate Dc
Dc 1.0000 m
Page 4
Cyclone calculation tool
Hc 0.5000 m
Bc 0.2000 m
Sc 0.5000 m
Di 0.5000 m
Lc 1.5000 m
Zc 2.5000 m
DS 0.3750 m
Ae/Ai 0.5096
Ri/re 0.6250
Ae/Ai*Ri/re 0.3185
Af/Ai 61.0000
Ce 0.8231
Ucc/Uce 1.2385
Rec 3105155.1557
Cf 0.0025
Characteristic velocities
Pressure drop
Af/PiRi(RCRi)^0.5 43.1335
Rc 0.5000
Ri/re 0.2500
ksice 3.2325
ksici 14.5970
DPC 7979.2966 Pa
wderprocess.net
Page 5
Cyclone calculation tool
a help and important information and calculation must always be double checked by the user through the
gulation. The use of the information is at the user and its organization own risk and own cost.
Page 6