Professional Documents
Culture Documents
Freightliner M2 114SD PMG Install Guide
Freightliner M2 114SD PMG Install Guide
Ignition
PMG
Display
Power Pins
Two pins are recommended Power: Aptiv Part Ignition/Ground: Aptiv Part
for the power connections on 12191818-L 12110844-L
M2 vehicles. These pins are
available online from many
sources: search on the pin
number listed below.
4. Connect the
PMG female J1939
connector to the
vehicle’s male 2. Disconnect the gray
J1939 connector. vehicle J1939 backbone
connection in the center
of the dash top.
J1939 Splice Block: Years 2016 & Newer
The J1939 Splice Block
Beginning in 2016 Daimler
is located under the top
switched to a 500K J1939
dash panel and labelled
circuit as primary. The pre-2016
“J1939 250K.”
location has that connection,
identified with white stripes on
the yellow and green leads,
plus a “500K “ label.
PMG
Factory-Wired M2 Fuse
By customer request, factory installed M2s are delivered with no power fuse inserted.
Follow these instructions to power the device.