Professional Documents
Culture Documents
CQI Assignment - Mechanics of Materials (Theory) (CE-212)
CQI Assignment - Mechanics of Materials (Theory) (CE-212)
Student Attempted
o CLO 1 CLOs 1 2 3 4
Name CLOs o CLO 2
(Tick all o CLO 3
Registration
No. applicable) o CLO 4 Marks 25 10 05 20
Question
Question CLOs PLOs
Number
The hoisting arrangement for lifting a large pipe is shown in Figure 4. The
spreader is made up of steel tubular section with outer diameter 70 mm and
inner diameter 57 mm. The length of spreader is 2.6 m and its modulus of
4 4 2
elasticity is 200 GPa. Using the factor of safety of 2.25 with respect to Euler
buckling of the spreader, what is the maximum weight of pipe that can be
lifted? Assume pinned conditions at the ends of the spreader.
General Instructions:
❖ Only attempt questions related to the CLOs where KPI is less than 50%, as per analytical
report. Also, tick all CLOs applicable/attempted in the assignment.
❖ Assignment must be submitted in a typed pdf. format using Times New Roman 12 point.
❖ Due date = 14th July 2023
Page 1 of 2
CQI Assignment- Mechanics of Materials (Theory) (CE-212)
Figure 1
Figure 2
Figure 3
Page 2 of 2